nand: yaffs: Remove the "nand write.yaffs" command

This command is only enabled by one board, complicates the NAND code,
and doesn't appear to have been functioning properly for several
years.  If there are no bad blocks in the NAND region being written
nand_write_skip_bad() will take the shortcut of calling nand_write()
which bypasses the special yaffs handling.  This causes invalid YAFFS
data to be written. See
http://lists.denx.de/pipermail/u-boot/2011-September/102830.html for
an example and a potential workaround.

U-Boot still retains the ability to mount and access YAFFS partitions
via CONFIG_YAFFS2.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

common/cmd_nand.c

@@ -704,16 +704,6 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
 						maxsize, (u_char *)addr,
 						WITH_DROP_FFS | WITH_WR_VERIFY);
-#endif
-#ifdef CONFIG_CMD_NAND_YAFFS
-		} else if (!strcmp(s, ".yaffs")) {
-			if (read) {
-				printf("Unknown nand command suffix '%s'.\n", s);
-				return 1;
-			}
-			ret = nand_write_skip_bad(nand, off, &rwsize, NULL,
-						maxsize, (u_char *)addr,
-						WITH_YAFFS_OOB | WITH_WR_VERIFY);
 #endif
 		} else if (!strcmp(s, ".oob")) {
 			/* out-of-band data */
@@ -856,11 +846,6 @@ static char nand_help_text[] =
 	"    write 'size' bytes starting at offset 'off' from memory address\n"
 	"    'addr', skipping bad blocks and dropping any pages at the end\n"
 	"    of eraseblocks that contain only 0xFF\n"
-#endif
-#ifdef CONFIG_CMD_NAND_YAFFS
-	"nand write.yaffs - addr off|partition size\n"
-	"    write 'size' bytes starting at offset 'off' with yaffs format\n"
-	"    from memory address 'addr', skipping bad blocks.\n"
 #endif
 	"nand erase[.spread] [clean] off size - erase 'size' bytes "
 	"from offset 'off'\n"

drivers/mtd/nand/nand_util.c

@@ -580,24 +580,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	if (actual)
 		*actual = 0;
 
-#ifdef CONFIG_CMD_NAND_YAFFS
+	blocksize = nand->erasesize;
-	if (flags & WITH_YAFFS_OOB) {
-		if (flags & (~WITH_YAFFS_OOB & ~WITH_WR_VERIFY))
-			return -EINVAL;
-
-		int pages;
-		pages = nand->erasesize / nand->writesize;
-		blocksize = (pages * nand->oobsize) + nand->erasesize;
-		if (*length % (nand->writesize + nand->oobsize)) {
-			printf("Attempt to write incomplete page"
-				" in yaffs mode\n");
-			return -EINVAL;
-		}
-	} else
-#endif
-	{
-		blocksize = nand->erasesize;
-	}
 
 	/*
 	 * nand_write() handles unaligned, partial page writes.
@@ -666,58 +649,22 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		else
 			write_size = blocksize - block_offset;
 
-#ifdef CONFIG_CMD_NAND_YAFFS
+		truncated_write_size = write_size;
-		if (flags & WITH_YAFFS_OOB) {
-			int page, pages;
-			size_t pagesize = nand->writesize;
-			size_t pagesize_oob = pagesize + nand->oobsize;
-			struct mtd_oob_ops ops;
-
-			ops.len = pagesize;
-			ops.ooblen = nand->oobsize;
-			ops.mode = MTD_OPS_AUTO_OOB;
-			ops.ooboffs = 0;
-
-			pages = write_size / pagesize_oob;
-			for (page = 0; page < pages; page++) {
-				WATCHDOG_RESET();
-
-				ops.datbuf = p_buffer;
-				ops.oobbuf = ops.datbuf + pagesize;
-
-				rval = mtd_write_oob(nand, offset, &ops);
-
-				if ((flags & WITH_WR_VERIFY) && !rval)
-					rval = nand_verify_page_oob(nand,
-							&ops, offset);
-
-				if (rval != 0)
-					break;
-
-				offset += pagesize;
-				p_buffer += pagesize_oob;
-			}
-		}
-		else
-#endif
-		{
-			truncated_write_size = write_size;
 #ifdef CONFIG_CMD_NAND_TRIMFFS
-			if (flags & WITH_DROP_FFS)
+		if (flags & WITH_DROP_FFS)
-				truncated_write_size = drop_ffs(nand, p_buffer,
+			truncated_write_size = drop_ffs(nand, p_buffer,
-						&write_size);
+					&write_size);
 #endif
 
-			rval = nand_write(nand, offset, &truncated_write_size,
+		rval = nand_write(nand, offset, &truncated_write_size,
-					p_buffer);
+				p_buffer);
 
-			if ((flags & WITH_WR_VERIFY) && !rval)
+		if ((flags & WITH_WR_VERIFY) && !rval)
-				rval = nand_verify(nand, offset,
+			rval = nand_verify(nand, offset,
-					truncated_write_size, p_buffer);
+				truncated_write_size, p_buffer);
 
-			offset += write_size;
+		offset += write_size;
-			p_buffer += write_size;
+		p_buffer += write_size;
-		}
 
 		if (rval != 0) {
 			printf("NAND write to offset %llx failed %d\n",

include/configs/M54418TWR.h

@@ -53,7 +53,6 @@
 #define CONFIG_CMD_MISC
 #define CONFIG_CMD_MII
 #undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_NAND_YAFFS
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING

include/configs/VCMA9.h

@@ -62,7 +62,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_YAFFS
 
 #define CONFIG_BOARD_LATE_INIT
 

include/nand.h

@@ -104,11 +104,8 @@ typedef struct nand_erase_options nand_erase_options_t;
 int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		       size_t *actual, loff_t lim, u_char *buffer);
 
-#define WITH_YAFFS_OOB	(1 << 0) /* whether write with yaffs format. This flag
+#define WITH_DROP_FFS	(1 << 0) /* drop trailing all-0xff pages */
-				  * is a 'mode' meaning it cannot be mixed with
+#define WITH_WR_VERIFY	(1 << 1) /* verify data was written correctly */
-				  * other flags */
-#define WITH_DROP_FFS	(1 << 1) /* drop trailing all-0xff pages */
-#define WITH_WR_VERIFY	(1 << 2) /* verify data was written correctly */
 
 int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 			size_t *actual, loff_t lim, u_char *buffer, int flags);