Djam/kernel-6.1
1
0
Fork 0
mirror of https://abf.rosa.ru/djam/kernel-6.1.git synced 2025-02-24 15:52:54 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
kernel-6.1/kernel.spec
Mikhail Novosyolov 1e10effa5c [bot] upd: 5.10.27 -> 5.10.28 
Changelog:

ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()
ACPI: tables: x86: Reserve memory occupied by ACPI tables
ALSA: hda: Add missing sanity checks in PM prepare/complete callbacks
ALSA: hda: Re-add dropped snd_poewr_change_state() calls
ALSA: hda/realtek: call alc_update_headset_mode() in hp_automute_hook
ALSA: hda/realtek: fix a determine_headset_type issue for a Dell AIO
ALSA: hda/realtek: fix mute/micmute LEDs for HP 640 G8
ALSA: usb-audio: Apply sample rate quirk to Logitech Connect
appletalk: Fix skb allocation size in loopback case
arm64: mm: correct the inside linear map range during hotplug check
ASoC: cs42l42: Always wait at least 3ms after reset
ASoC: cs42l42: Fix Bitclock polarity inversion
ASoC: cs42l42: Fix channel width support
ASoC: cs42l42: Fix mixer volume control
ASoC: es8316: Simplify adc_pga_gain_tlv table
ASoC: rt1015: fix i2c communication error
ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor of 10
ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor of 10
ASoC: rt5659: Update MCLK rate in set_sysclk()
ASoC: rt711: add snd_soc_component remove callback
ASoC: sgtl5000: set DAP_AVC_CTRL register to correct default value on probe
ASoC: soc-core: Prevent warning if no DMI table is present
ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()
ath11k: add ieee80211_unregister_hw to avoid kernel crash caused by NULL pointer
bpf: Fix fexit trampoline.
bpf: Remove MTU check in __bpf_skb_max_len
bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog, 5) for BPF_TRAMP_F_CALL_ORIG
brcmfmac: clear EAP/association status bits on linkdown events
can: dev: move driver related infrastructure into separate subdir
can: tcan4x5x: fix max register value
cdc-acm: fix BREAK rx code path adding necessary calls
driver core: clear deferred probe reason on probe retry
drivers: video: fbcon: fix NULL dereference in fbcon_cursor()
drm/amdgpu: check alignment on CPU page for bo map
drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()
drm/amdkfd: dqm fence memory corruption
drm/imx: fix memory leak when fails to init
drm/tegra: dc: Restore coupling of display controllers
drm/tegra: sor: Grab runtime PM reference across reset
ext4: do not iput inode under running transaction in ext4_rename()
ext4: fix bh ref count on error paths
ext4: shrink race window in ext4_should_retry_alloc()
extcon: Add stubs for extcon_register_notifier_all() functions
extcon: Fix error handling in extcon_dev_register
firewire: nosy: Fix a use-after-free bug in nosy_ioctl()
firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
flow_dissector: fix TTL and TOS dissection on IPv4 fragments
fs: nfsd: fix kconfig dependency warning for NFSD_V4
iomap: Fix negative assignment to unsigned sis->pages in iomap_swapfile_activate
io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL
io_uring: fix ->flags races by linked timeouts
io_uring: imply MSG_NOSIGNAL for send[msg]()/recv[msg]() calls
iwlwifi: pcie: don't disable interrupts for reg_lock
kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing
KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
KVM: SVM: load control fields from VMCB12 before checking them
locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini()
locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling
mm: fix race by making init_zero_pfn() early_initcall
net: 9p: advance iov on empty read
netdevsim: dev: Initialize FIB module after debugfs
net: ethernet: aquantia: Handle error cleanup of start on open
net: introduce CAN specific pointer in the struct net_device
net: ipa: fix register write command validation
net: ipa: remove two unused register definitions
net: mvpp2: fix interrupt mask/unmask skip condition
net: wan/lmc: unregister device when no matching device is found
NFSD: fix error handling in NFSv4.0 callbacks
nvmet-tcp: fix kmap leak when data digest in use
pinctrl: rockchip: fix restore error in resume
PM: runtime: Fix ordering in pm_runtime_get_suppliers()
PM: runtime: Fix race getting/putting suppliers at probe
reiserfs: update reiserfs_xattrs_initialized() condition
Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing"
riscv: evaluate put_user() arg before enabling user access
rpc: fix NULL dereference on kmalloc failure
rtw88: coex: 8821c: correct antenna switch function
s390/vdso: copy tod_steering_delta value to vdso_data page
s390/vdso: fix tod_steering_delta type
scsi: qla2xxx: Fix broken #endif placement
scsi: st: Fix a use after free in st_open()
soc: qcom-geni-se: Cleanup the code to remove proxy votes
staging: comedi: cb_pcidas64: fix request_irq() warn
staging: comedi: cb_pcidas: fix request_irq() warn
staging: rtl8192e: Change state information from u16 to u8
staging: rtl8192e: Fix incorrect source in memcpy()
static_call: Align static_call_is_init() patching condition
thermal/core: Add NULL pointer check before using cooling device stats
tracing: Fix stack trace event size
USB: cdc-acm: downgrade message to debug
USB: cdc-acm: fix double free on probe failure
USB: cdc-acm: fix use-after-free after probe failure
USB: cdc-acm: untangle a circular dependency between callback and softint
usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.
usb: dwc2: Prevent core suspend when port connection flag is 0
usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable
usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield
usb: dwc3: qcom: skip interconnect init for ACPI probe
usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference
usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()
usb: musb: Fix suspend with devices connected for a64
USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem
usb: xhci-mtk: fix broken streams issue on 0.96 xHCI
vfio/nvlink: Add missing SPAPR_TCE_IOMMU depends
vhost: Fix vhost_vq_reset()
video: hyperv_fb: Fix a double free in hvfb_probe
virtiofs: Fail dax mount if device does not support it
xtensa: fix uaccess-related livelock in do_page_fault
xtensa: move coprocessor_flush to the .text section

Updated by kernel-updater-bot (https://abf.io/mikhailnov/kernel-updater-bot)
2021-04-09 17:04:54 +03:00

1642 lines
53 KiB
RPMSpec
Raw Blame History

# _get_email() in %%build contains bashisms for regexping
%define _buildshell /bin/bash
# Prevent RPM scripts from stripping signatures,
# we strip binaries manually in %%build
%define __strip %(which true)
# brp-python-bytecompile uses /usr/bin/python,
# but it is a different python version in different ROSA
# releases; there is no good way to tell brp-python-bytecompile
# which iterpreter to use; so just disable it to avoid problems
%define _python_bytecompile_build 0
# Probably dwz bug, on i686 only file is not packaged:
# /usr/lib/debug/usr/bin/trace-5.4.40-3.i386.debug.#dwz#.b5xuKG
# dwz compresses only debuginfo from perf, cpupower, uml,
# not the kernel itself (because it is stripped not by RPM),
# so we do not loose much by disabling it.
%global _find_debuginfo_dwz_opts %{nil}
%define kernelversion 5
%define patchlevel 10
%define sublevel 28
# Release number. Increase this before a rebuild.
%define rpmrel 1
%define fullrpmrel %{rpmrel}
%define rpmtag %{disttag}
# fakerel and fakever never change, they are used to fool
# rpm/urpmi/smart and ensure the kernels are installed,
# not upgraded so old kernel is not overwritten or removed
%define fakever 1
%define fakerel %mkrel 1
# version defines
%define kversion %{kernelversion}.%{patchlevel}.%{sublevel}
%define kverrel %{kversion}-%{fullrpmrel}
%define tar_ver %{kernelversion}.%{patchlevel}
%ifarch %{ix86}
%define arch_suffix i586
%endif
%ifarch %{x86_64}
%define arch_suffix x86_64
%endif
%ifarch aarch64
%define arch_suffix arm64
%endif
%define buildrpmrel %{fullrpmrel}%{rpmtag}-%{arch_suffix}
%define buildrel %{kversion}-%{buildrpmrel}
# Add not only the build time generated key to the trusted keyring,
# but also add public keys of private ROSA's keys
%bcond_without additional_keys
# User Mode Linux, https://habr.com/ru/company/itsumma/blog/459558/
# Not buildable on aarch64
%ifarch %{x86_64}
%bcond_without uml
%else
%bcond_with uml
%endif
# "Nickel" is a special brand for certified distros
%if %{mdvver} == 201900 || %{mdvver} == 201905
%bcond_without nickel
# Require kernel modules to be signed
%bcond_without oblig_signed_modules
%else
%bcond_with nickel
%bcond_with oblig_signed_modules
%endif
%if %{mdvver} >= 201905
# Build binary out-of-tree kernel modules (experimental)
%bcond_without binary_extra_modules
# Sign kernel modules with GOST key (experimental)
%bcond_without gost_sign
%else
%bcond_with binary_extra_modules
%bcond_with gost_sign
%endif
%bcond_with ccache
%bcond_without flow_abi
# 1. VirtualBox is for x86_32 and x86_64 only
# 2. I do not know how to solve the problem that userspace part of VirtualBox
# will be updated ahead of these binary modules. So just off building them.
%bcond_with binary_virtualbox_host
# shredder-kernel works only on x86_64, makes manipulations with syscalls tables,
# loading/unloading of the module failed sometimes on kernel 5.4
# and it has not been adapted for kernel 5.10 (is not buildable)
%bcond_with binary_shredder
# Kernel flavour
%if %{with nickel}
%define flavour nickel
%else
%define flavour generic
%endif
# The full kernel version
%define kver_full %{kversion}-%{flavour}-%{buildrpmrel}
############################################################################
%define top_dir_name kernel-%{_arch}
%define build_dir ${RPM_BUILD_DIR}/%{top_dir_name}
%define src_dir %{build_dir}/linux-%{tar_ver}
# Common target directories
%define _bootdir /boot
%define _modulesdir /lib/modules
%define devel_root /usr/src/linux-%{kver_full}
# Directories needed for building
%define temp_root %{build_dir}/temp-root
%define temp_boot %{temp_root}%{_bootdir}
%define temp_modules %{temp_root}%{_modulesdir}
%define temp_devel_root %{temp_root}%{devel_root}
# Directories definition needed for installing
%define target_boot %{buildroot}%{_bootdir}
%define target_modules %{buildroot}%{_modulesdir}
# Manual control of creating and deleting keys
# "rnd" is "random" and means that a key pair is generated at build time
# and is not saved anywhere.
%define certs_dir_rnd certs
%define certs_signing_key_priv_rnd %{certs_dir_rnd}/signing_key_priv.key
%define certs_signing_der %{certs_dir_rnd}/signing_key.x509
%define certs_key_config_rnd %{certs_dir_rnd}/x509.genkey
%define certs_public_keys %{certs_dir_rnd}/public.pem
%define certs_verify_tmp %{certs_dir_rnd}/verify.tmp
############################################################################
# Build defines
%define build_doc 0
%define build_devel 1
%define build_debug 1
# Build kernel-headers package
# Headers from LTS kernel 5.4 are default in rosa2019.1/05 for now
# and headers from 4.15 are default in rosa2016.1
%define build_headers 0
# build perf and cpupower tools
%if %{mdvver} > 201610
%define build_perf 1
%define build_cpupower 1
%else
# This is not the main kernel in rosa2016.1
# This one will be in contrib, not main, in rosa2016.1
%define build_perf 0
%define build_cpupower 0
%endif
# compress modules with xz
%define build_modxz 1
# End of user definitions
# buildtime flags
%{?_without_doc: %global build_doc 0}
%{?_without_devel: %global build_devel 0}
%{?_without_debug: %global build_debug 0}
%{?_without_perf: %global build_perf 0}
%{?_without_cpupower: %global build_cpupower 0}
%{?_without_modxz: %global build_modxz 0}
%{?_with_doc: %global build_doc 1}
%{?_with_devel: %global build_devel 1}
%{?_with_debug: %global build_debug 1}
%{?_with_perf: %global build_perf 1}
%{?_with_cpupower: %global build_cpupower 1}
%{?_with_modxz: %global build_modxz 1}
%if %{build_modxz}
%define kmod_suffix .xz
%else
%define kmod_suffix .gz
%endif
%if !%{build_debug}
# Disable debug rpms.
%define _enable_debug_packages %{nil}
%define debug_package %{nil}
%endif
# http://nickdesaulniers.github.io/blog/2018/06/02/speeding-up-linux-kernel-builds-with-ccache/
%if %{with ccache}
%define kmake KBUILD_BUILD_TIMESTAMP='' %make CC='ccache gcc' ARCH="%{arch_type}"
%else
%define kmake %make CC='gcc' ARCH="%{arch_type}"
%endif
# there are places where parallel make don't work
%define smake make
%ifarch %{ix86} %{x86_64}
%define arch_type x86
%endif
%ifarch aarch64
%define arch_type arm64
%endif
# Parallelize xargs invocations on smp machines
%define kxargs xargs %([ -z "$RPM_BUILD_NCPUS" ] \\\
&& RPM_BUILD_NCPUS="`/usr/bin/getconf _NPROCESSORS_ONLN`"; \\\
[ "$RPM_BUILD_NCPUS" -gt 1 ] && echo "-P $RPM_BUILD_NCPUS")
#
# SRC RPM description
#
Summary: The Linux kernel
Name: kernel
Version: %{kversion}
Release: %{fullrpmrel}
License: GPLv2
Group: System/Kernel and hardware
URL: http://www.kernel.org
####################################################################
#
# Sources
#
Source0: https://cdn.kernel.org/pub/linux/kernel/v%{kernelversion}.x/linux-%{tar_ver}.tar.xz
# This is for disabling *config, mrproper, prepare, scripts on -devel rpms
# Needed, because otherwise the -devel won't build correctly.
Source2: 0001-disable-mrproper-prepare-scripts-configs-in-devel-rp.patch
# TODO: make a separate package "ksobirator" and BR it
# after testing these macros properly
Source3: macros.ksobirator
%{load:%{SOURCE3}}
# Kernel configuration files.
Source111: kernel-x86_64.config
Source112: kernel-i586.config
Source113: kernel-arm64.config
# Cpupower: the service, the config, etc.
Source50: cpupower.service
Source51: cpupower.config
Source52: cpupower-start.sh
Source53: cpupower.path
Source80: kernel.rpmlintrc
# Additional keys that can be used to sign kernel modules
# Generated by https://abf.io/soft/kernel-keys
# Source201..206: public_key_GOST_*.pem
%{expand:%(for i in `seq 1 6`; do echo "Source$((200+${i})): public_key_GOST_${i}.pem"; done)}
# Source207..212: public_key_RSA_*.pem
%{expand:%(for i in `seq 7 12`; do echo "Source$((200+${i})): public_key_RSA_${i}.pem"; done)}
####################################################################
# Patches
# The patch to make kernel x.y.z from x.y.0.
Patch1: https://cdn.kernel.org/pub/linux/kernel/v%{kernelversion}.x/patch-%{kversion}.xz
# Patches from mainline
# none
# ROSA-specific patches
# Perf docs are built after all the kernels. To validate the xml files
# generated during that process, xmlto tries to get DTD files from the Net.
# If it fails, the whole build fails, which is unfortunate. Let us avoid
# this.
Patch101: 0001-perf-skip-xmlto-validation.patch
# http://bugs.rosalinux.ru/show_bug.cgi?id=6235
# http://bugs.rosalinux.ru/show_bug.cgi?id=6459
Patch102: 0001-audit-make-it-less-verbose.patch
# AUFS 5 from http://aufs.sourceforge.net/
Patch109: 0001-Apply-AUFS-5.patch
# Unofficial AUFS for kernel 5.10
# https://sourceforge.net/projects/lxpup/files/Other/huge-kernels/kernel-5.10-aufs-changes/
Patch110: aufs-k510.diff
# For kmod() generator of RPM Provides
# Changes version of aacraid.ko
Patch111: 0001-Remove-RPM-illegal-chars-from-module-version.patch
# AltHa LSM Module
# https://www.altlinux.org/AltHa
# http://git.altlinux.org/gears/k/kernel-image-un-def.git
# TODO: known problem: https://bugzilla.altlinux.org/show_bug.cgi?id=38225
Patch201: 0001-AltHa-LSM-module.patch
Patch202: 0002-Documentation-for-AltHa-LSM.patch
Patch203: 0003-security-altha-altha_lsm.c-build-fixed-with-kernel-5.patch
Patch204: 0004-altha-use-path-strings-instead-of-path-structs.patch
# sent to upstream, https://patchwork.kernel.org/patch/11446123/
Patch302: 0001-sign-file-full-functionality-with-modern-LibreSSL.patch
# Support loading GOST-signed modules
Patch305: 0001-crypto-support-loading-GOST-signed-kernel-modules.patch
# Allow to off modules signature check dynamically
Patch306: 0001-ROSA-ima-allow-to-off-modules-signature-check-dynami.patch
# Experimental patch to reduce freezes in low memory conditions
# Config values are the following:
# CONFIG_UNEVICTABLE_ACTIVEFILE=y
# CONFIG_UNEVICTABLE_ACTIVEFILE_KBYTES_LOW=102400 (100 MB)
# CONFIG_UNEVICTABLE_ACTIVEFILE_KBYTES_MIN=51200 (50 MB)
# + zswap is enabled by default
# 50 MB is default value of min_filelist_kbytes in Chromium OS
# https://chromium.googlesource.com/chromiumos/third_party/kernel-next/+/545e2917dbd863760a51379de8c26631e667c563%5E!/
# 256 and 512 MB values are too big as a distro default because many systems have 512MB-2GB RAM
# TODO: tune 50 and 100 MB to some not random and mathemetically explainable values
# https://www.linux.org.ru/news/kernel/16052362?cid=16075323
Patch307: le9pf.diff
Patch308: 0001-Revert-kallsyms-unexport-kallsyms_lookup_name-and-ka.patch
# Disable AutoReq
AutoReq: 0
# but keep autoprov for kmod(xxx)
AutoProv: 1
BuildRequires: bash
BuildRequires: bc
BuildRequires: binutils
BuildRequires: gcc
# ./scripts/mkcompile_h
# in net-tools in rosa2016.1, already installed
%if %{mdvver} > 201610
BuildRequires: hostname
%endif
# For power tools
BuildRequires: pkgconfig(ncurses)
BuildRequires: kmod-devel kmod-compat
BuildRequires: bison
BuildRequires: flex
BuildRequires: bzip2
BuildRequires: rsync
%ifarch x86_64 aarch64
BuildRequires: numa-devel
%endif
# for perf, cpufreq and all other tools
# for cpupower
%if %{build_cpupower}
BuildRequires: pciutils-devel
%endif
# for perf
%if %{build_perf}
BuildRequires: asciidoc
BuildRequires: audit-devel
BuildRequires: binutils-devel
BuildRequires: elfutils-devel
BuildRequires: libunwind-devel
BuildRequires: newt-devel
BuildRequires: perl-devel
BuildRequires: python3
BuildRequires: pkgconfig(python3)
BuildRequires: xmlto
BuildRequires: zlib-devel
BuildRequires: pkgconfig(libcrypto)
%endif
%if %{with uml}
BuildRequires: vde-devel
%endif
# (To generate keys)
# LibreSSL has GOST support without editing openssl.cnf
# or dlopen()-ing external library
BuildRequires: libressl libressl-devel
# To verify signatures (find, xargs, hexdump)
BuildRequires: findutils util-linux
%if %{with binary_extra_modules}
BuildRequires: kernel-source-rtl8821ce
BuildRequires: kernel-source-tripso
BuildRequires: kernel-source-ipt-so
%if %{with binary_virtualbox_host}
BuildRequires: kernel-source-virtualbox
%endif
%if %{with binary_shredder}
BuildRequires: kernel-source-shredder-kernel
%endif
# rosa-test-suite is maintained in certified branches only
# nlkm, memfreetest, pcietest
%if %{with nickel}
BuildRequires: kernel-source-rosa-test-suite
%endif
%endif #with binary_extra_modules
%if %{with ccache}
BuildRequires: ccache
%endif
# might be useful too:
Recommends: microcode
%description
The kernel package contains the Linux kernel (vmlinuz), the core of your
operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
############################################################################
%package -n kernel-%{flavour}-%{buildrel}
Version: %{fakever}
Release: %{fakerel}
Provides: kernel = %{kverrel}
Provides: kernel = %{kernelversion}.%{patchlevel}
Provides: kernel-%{flavour} = %{kverrel}
Provides: alsa = 1.0.27
Provides: should-restart = system
Requires(post): dracut
Requires(post): kmod
# Usually necessary, but sometimes user may want to not install them
Recommends: linux-firmware
Recommends: wireless-regdb
Recommends: crda
%if %{with flow_abi}
Requires: kernel-%{kernelversion}.%{patchlevel}-rosa-flow-abi
%endif
# Set BFQ as default scheduler for HDDs
# https://www.phoronix.com/scan.php?page=article&item=linux-50hdd-io
Recommends: udev-rules-ioschedulers
# Keep these deps on old platforms
# but get rid of puling gcc etc. by the kernel on newer platforms
%if %{build_devel} && %{mdvver} < 201900
Requires: kernel-%{flavour}-devel-%{buildrel}
Requires(post): kernel-%{flavour}-devel-%{buildrel}
%endif
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
Summary: A general-purpose Linux Kernel
Group: System/Kernel and hardware
%description -n kernel-%{flavour}-%{buildrel}
The kernel package contains the Linux kernel (vmlinuz), the core of your
operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc. This is a general-purpose kernel.
%post -n kernel-%{flavour}-%{buildrel}
# We always regenerate initrd here, even if it already exists. This may
# happen if kernel-<...>-devel is installed first, triggers rebuild of
# DKMS modules and some of these request remaking of initrd. The initrd
# that is created then will be non-functional. But when the user installs
# kernel-<...> package, that defunct initrd will be replaced with a working
# one here.
#
# depmod is also needed, because some DKMS-modules might have been installed
# when the devel package was installed but that was before the main modules
# were installed.
# This is also the reason the devel package is in Requires(post) for this
# package now: it must be installed completely before we call depmod here.
/sbin/depmod -a %{kver_full}
/sbin/dracut -f /boot/initrd-%{kver_full}.img %{kver_full}
# File triggers from grub packages will handle this.
#/usr/sbin/update-grub2
%postun -n kernel-%{flavour}-%{buildrel}
rm -f /boot/initrd-%{kver_full}.img
rm -f /boot/initrd-%{kver_full}_old.img
rm -f /boot/initrd-%{kver_full}kdump.img
rm -f /boot/initramfs-%{kver_full}kdump.img
# Third-party modules might have left something in /lib/modules/.../kernel/.
rm -rf /lib/modules/%{kver_full}/kernel/
rm -rf /lib/modules/%{kver_full}/modules*
# Remove /lib/modules/<...>/ if it is empty (-devel uses it too).
find /lib/modules/%{kver_full} -maxdepth 0 -empty -exec rm -rf {} \; || true
%files -n kernel-%{flavour}-%{buildrel} -f kernel_files.%{flavour}
############################################################################
%if %build_devel
%package -n kernel-%{flavour}-devel-%{buildrel}
Version: %{fakever}
Release: %{fakerel}
Summary: Development files for kernel-%{flavour}-%{buildrel}
Group: Development/Kernel
Requires: glibc-devel
Requires: ncurses-devel
Requires: make
Requires: gcc
Requires: perl
Provides: kernel-devel = %{kverrel}
Provides: kernel-%{flavour}-devel = %{kverrel}
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
%description -n kernel-%{flavour}-devel-%{buildrel}
This package contains the kernel files (headers and build tools)
that should be enough to build additional drivers for
use with kernel-%{flavour}-%{buildrel}.
%post -n kernel-%{flavour}-devel-%{buildrel}
if command -v dkms_autoinstaller >/dev/null 2>&1; then
dkms_autoinstaller start %{kver_full}
fi
%preun -n kernel-%{flavour}-devel-%{buildrel}
# If any DKMS modules with REMAKE_INITRD=yes in their configs have been
# uninstalled, initrd has been regenerated for the given kernel. However,
# the kernel itself might have been uninstalled before, so that (defunct)
# initrd image files would be left behind. Remove them if the kernel itself
# is no longer installed. Should work if they are uninstalled in parallel
# too.
if ! test -f /boot/vmlinuz-%{kver_full}; then
rm -f /boot/initrd-%{kver_full}.img
rm -f /boot/initrd-%{kver_full}_old.img
fi
if ! command -v dkms >/dev/null 2>&1; then exit 0; fi
for ii in $(/usr/sbin/dkms status -k %{kver_full} | awk '{ print $1 $2; }'); do
mod=$(echo $ii | awk -v FS=',' '{ print $1; }')
ver=$(echo $ii | awk -v FS=',' '{ print $2; }')
/usr/sbin/dkms --rpm_safe_upgrade uninstall -m $mod -v $ver -k %{kver_full} || :
done
%postun -n kernel-%{flavour}-devel-%{buildrel}
rm -rf /usr/src/linux-%{kver_full} >/dev/null
# depmod (called when removing DKMS modules) might have created files in
# /lib/modules/.../. Remove these first.
rm -rf /lib/modules/%{kver_full}/modules*
# Remove the dir if it is already empty.
find /lib/modules/%{kver_full} -maxdepth 0 -empty -exec rm -rf {} \; || true
%files -n kernel-%{flavour}-devel-%{buildrel}
%{devel_root}/Documentation
%dir %{devel_root}
%dir %{devel_root}/arch
%dir %{devel_root}/include
%{devel_root}/arch/um
%{devel_root}/arch/x86
%{devel_root}/arch/arm
%{devel_root}/arch/arm64
%{devel_root}/block
%{devel_root}/certs
%{devel_root}/crypto
%{devel_root}/drivers
%{devel_root}/fs
%{devel_root}/include/soc
%{devel_root}/include/acpi
%{devel_root}/include/asm-generic
%{devel_root}/include/clocksource
%{devel_root}/include/config
%{devel_root}/include/crypto
%{devel_root}/include/drm
%{devel_root}/include/dt-bindings
%{devel_root}/include/generated
%{devel_root}/include/keys
%{devel_root}/include/kvm
%{devel_root}/include/kunit
%{devel_root}/include/linux
%{devel_root}/include/math-emu
%{devel_root}/include/media
%{devel_root}/include/memory
%{devel_root}/include/misc
%{devel_root}/include/net
%{devel_root}/include/pcmcia
%{devel_root}/include/ras
%{devel_root}/include/rdma
%{devel_root}/include/scsi
%{devel_root}/include/sound
%{devel_root}/include/target
%{devel_root}/include/trace
%{devel_root}/include/uapi
%{devel_root}/include/vdso
%{devel_root}/include/video
%{devel_root}/include/xen
%{devel_root}/init
%{devel_root}/ipc
%{devel_root}/kernel
%{devel_root}/lib
%{devel_root}/mm
%{devel_root}/net
%{devel_root}/samples
%{devel_root}/scripts
%{devel_root}/security
%{devel_root}/sound
%{devel_root}/tools
%{devel_root}/usr
%{devel_root}/virt
%{devel_root}/.config
%{devel_root}/Kbuild
%{devel_root}/Kconfig
%{devel_root}/Makefile
%{devel_root}/Module.symvers
%{devel_root}/arch/Kconfig
%{_modulesdir}/%{kver_full}/build
%{_modulesdir}/%{kver_full}/source
%endif
############################################################################
%if %build_debug
%package -n kernel-%{flavour}-%{buildrel}-debuginfo
Version: %{fakever}
Release: %{fakerel}
Summary: Debuginfo for kernel-%{flavour}-%{buildrel}
Group: Development/Debug
Provides: kernel-debug = %{kverrel}
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
%description -n kernel-%{flavour}-%{buildrel}-debuginfo
This package contains the files with debuginfo for kernel-%{flavour}-%{buildrel}.
%files -n kernel-%{flavour}-%{buildrel}-debuginfo -f kernel_debug_files.%{flavour}
%endif
############################################################################
%package -n kernel-%{flavour}-%{kernelversion}.%{patchlevel}-latest
Version: %{kversion}
Release: %{fullrpmrel}
Summary: Meta package for the latest kernel-%{flavour} in %{kernelversion}.%{patchlevel} series
Group: System/Kernel and hardware
Requires: kernel-%{flavour}-%{buildrel}
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
%description -n kernel-%{flavour}-%{kernelversion}.%{patchlevel}-latest
This meta package aims to make sure you always have the
latest kernel-%{flavour} %{kernelversion}.%{patchlevel}.x installed.
%files -n kernel-%{flavour}-%{kernelversion}.%{patchlevel}-latest
# no files
############################################################################
%if %build_devel
%package -n kernel-%{flavour}-%{kernelversion}.%{patchlevel}-devel-latest
Version: %{kversion}
Release: %{fullrpmrel}
Summary: Meta package for the latest kernel-%{flavour}-devel in %{kernelversion}.%{patchlevel} series
Group: Development/Kernel
Requires: kernel-%{flavour}-devel-%{buildrel}
Provides: kernel-devel-latest
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
%description -n kernel-%{flavour}-%{kernelversion}.%{patchlevel}-devel-latest
This meta package aims to make sure you always have the
latest kernel-%{flavour}-devel %{kernelversion}.%{patchlevel}.x installed.
%files -n kernel-%{flavour}-%{kernelversion}.%{patchlevel}-devel-latest
# no files
%endif
############################################################################
%if %build_doc
%package -n kernel-doc
Version: %{kversion}
Release: %{fullrpmrel}
Summary: Various documentation bits found in the kernel source
Group: Documentation
Buildarch: noarch
%description -n kernel-doc
This package contains documentation files from the kernel source.
%files -n kernel-doc
%doc linux-%{tar_ver}/Documentation/*
%endif
############################################################################
%if %{build_perf}
%package -n perf
Version: %{kversion}
Release: %{fullrpmrel}
Summary: perf tool and the supporting documentation
Group: System/Kernel and hardware
%description -n perf
The package contains perf tool and the supporting documentation.
%files -n perf
%{_bindir}/perf
%ifarch x86_64
%{_bindir}/perf-read-vdso32
%endif
%{_bindir}/trace
%dir %{_prefix}/libexec/perf-core
%dir %{_libdir}/traceevent
%dir %{_libdir}/traceevent/plugins
%{_libdir}/traceevent/plugins/*
%{_prefix}/libexec/perf-core/*
%{_mandir}/man[1-8]/perf*
%{_sysconfdir}/bash_completion.d/perf
%{_datadir}/perf-core/strace/groups/*
%{_datadir}/doc/perf-tip/*.txt
/usr/lib/perf/examples/bpf/*
/usr/lib/perf/include/bpf/*
%endif
############################################################################
%if %{build_cpupower}
%package -n cpupower
Version: %{kversion}
Release: %{fullrpmrel}
Summary: The cpupower tools
Group: System/Kernel and hardware
Requires(post): rpm-helper >= 0.24.0-3
Requires(preun): rpm-helper >= 0.24.0-3
Obsoletes: cpufreq < 3.0
Obsoletes: cpufrequtils < 10.0
%description -n cpupower
The cpupower tools.
%post -n cpupower
if [ $1 -ge 0 ]; then
# Do not enable/disable cpupower.service directly, because it should start
# when cpupower.path triggers it.
/bin/systemctl enable cpupower.path >/dev/null 2>&1 || :
/bin/systemctl start cpupower.path >/dev/null 2>&1 || :
fi
%preun -n cpupower
if [ $1 -eq 0 ]; then
/bin/systemctl --no-reload disable cpupower.path > /dev/null 2>&1 || :
/bin/systemctl stop cpupower.path > /dev/null 2>&1 || :
fi
%files -n cpupower -f cpupower.lang
%{_bindir}/cpupower
%{_bindir}/cpupower-start.sh
%{_libdir}/libcpupower.so.0
%{_libdir}/libcpupower.so.0.0.1
%{_unitdir}/cpupower.service
%{_unitdir}/cpupower.path
%{_datadir}/bash-completion/completions/cpupower
%{_mandir}/man[1-8]/cpupower*
%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
############################################################################
%package -n cpupower-devel
Version: %{kversion}
Release: %{fullrpmrel}
Summary: Development files for cpupower
Group: Development/Kernel
Requires: cpupower = %{kversion}-%{fullrpmrel}
Conflicts: %{_lib}cpufreq-devel
%description -n cpupower-devel
This package contains the development files for cpupower.
%files -n cpupower-devel
%{_libdir}/libcpupower.so
%{_includedir}/cpufreq.h
%{_includedir}/cpuidle.h
%endif
############################################################################
%if %{build_headers}
%package headers
Version: %kversion
Release: %fullrpmrel
Summary: Linux kernel header files mostly used by your C library
Group: System/Kernel and hardware
Epoch: 1
Provides: linux-userspace-headers = %{EVRD}
Provides: kernel-release-headers = %{EVRD}
%description headers
C header files from the Linux kernel. The header files define
structures and constants that are needed for building most
standard programs, notably the C library.
This package is not suitable for building kernel modules, you
should use the 'kernel-devel' package instead.
%files headers
%{_includedir}/*
# Don't conflict with cpupower-devel
%if %{build_cpupower}
%exclude %{_includedir}/cpufreq.h
%exclude %{_includedir}/cpuidle.h
%endif
%endif
############################################################################
%if %{with uml}
%package -n kernel-uml-%{flavour}-%{buildrel}
Version: %{fakever}
Release: %{fakerel}
Provides: kernel-uml = %{kverrel}
Provides: kernel-uml-%{flavour} = %{kverrel}
Summary: User Mode Linux binary
Group: System/Kernel and hardware
%description -n kernel-uml-%{flavour}-%{buildrel}
User Mode Linux binary.
Stripped, debug is in kernel-%{flavour}-%{buildrel}-debuginfo.
%files -n kernel-uml-%{flavour}-%{buildrel}
%{_bindir}/linux-uml-%{kver_full}
#------------------------------------------------
%package -n kernel-uml-modules-%{flavour}-%{buildrel}
Version: %{fakever}
Release: %{fakerel}
Provides: kernel-uml-modules = %{kverrel}
Provides: kernel-uml-modules-%{flavour} = %{kverrel}
Summary: User Mode Linux (UML) kernel modules
Group: System/Kernel and hardware
%description -n kernel-uml-modules-%{flavour}-%{buildrel}
User Mode Linux (UML) kernel modules
- not compressed
- not stripped
- signed
%files -n kernel-uml-modules-%{flavour}-%{buildrel}
/lib/modules-uml/%{kver_full}
#------------------------------------------------
%package -n kernel-uml-%{flavour}-%{kernelversion}.%{patchlevel}-latest
Version: %{kversion}
Release: %{fullrpmrel}
Summary: Meta package for the latest kernel-uml-%{flavour} in %{kernelversion}.%{patchlevel} series
Group: System/Kernel and hardware
Requires: kernel-uml-%{flavour}-%{buildrel}
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
%description -n kernel-uml-%{flavour}-%{kernelversion}.%{patchlevel}-latest
This meta package aims to make sure you always have the
latest kernel-uml-%{flavour} %{kernelversion}.%{patchlevel}.x
(User Mode Linux binary) installed.
%files -n kernel-uml-%{flavour}-%{kernelversion}.%{patchlevel}-latest
# no files
#------------------------------------------------
%package -n kernel-uml-modules-%{flavour}-%{kernelversion}.%{patchlevel}-latest
Version: %{kversion}
Release: %{fullrpmrel}
Summary: Meta package for the latest kernel-uml-modules-%{flavour} in %{kernelversion}.%{patchlevel} series
Group: System/Kernel and hardware
Requires: kernel-uml-modules-%{flavour}-%{buildrel}
%ifarch %{ix86}
Conflicts: arch(x86_64)
%endif
%description -n kernel-uml-modules-%{flavour}-%{kernelversion}.%{patchlevel}-latest
This meta package aims to make sure you always have the
latest kernel-uml-modules-%{flavour} %{kernelversion}.%{patchlevel}.x
(User Mode Linux kernel modules) installed.
%files -n kernel-uml-modules-%{flavour}-%{kernelversion}.%{patchlevel}-latest
# no files
#------------------------------------------------
%endif #endif uml
#------------------------------------------------
%if %{with binary_extra_modules}
%ksob_mk_module_pkg -n 8821ce -s net/wireless -r rtl8821ce-blacklist
%ksob_mk_module_pkg -n xt_TRIPSO -s net -r tripso
%ksob_mk_module_pkg -n xt_so -s net -r ipt-so
%if %{with binary_shredder}
%ksob_mk_module_pkg -n shredder-kernel -s extra -r rosa-shredder-user
%endif
#------------------------------------------------
# virtualbox host
%if %{with binary_virtualbox_host}
%ksob_mk_module_pkg -n vboxnetflt -s misc
%ksob_mk_module_pkg -n vboxnetadp -s misc
%ksob_mk_module_pkg -n vboxdrv -s misc
%ksob_mk_module_pkg -n vboxpci -s misc
# a package which will pull all those modules
%package -n kernel-modules-virtualbox-host-%{flavour}-%{kernelversion}.%{patchlevel}-latest
Summary: Meta package to pull VirtualBox host kernel modules for kernel-%{flavour}-%{kernelversion}.%{patchlevel}
Group: System/Kernel and hardware
Version: %{kversion}
Release: %{fullrpmrel}
Requires: kernel-module-vboxnetflt-%{flavour}-%{buildrel}
Requires: kernel-module-vboxnetadp-%{flavour}-%{buildrel}
Requires: kernel-module-vboxdrv-%{flavour}-%{buildrel}
Requires: kernel-module-vboxpci-%{flavour}-%{buildrel}
%description -n kernel-modules-virtualbox-host-%{flavour}-%{kernelversion}.%{patchlevel}-latest
Meta package to pull VirtualBox host kernel modules for kernel-%{flavour}-%{kernelversion}.%{patchlevel}
%files -n kernel-modules-virtualbox-host-%{flavour}-%{kernelversion}.%{patchlevel}-latest
# empty
%endif #ifarch x86
#------------------------------------------------
%if %{with nickel}
%ksob_mk_module_pkg -n nlkm -s misc
%ksob_mk_module_pkg -n memfreetest -s misc
%ksob_mk_module_pkg -n pcietest -s misc
%endif
%endif #binary_extra_modules
############################
%if %{with flow_abi}
%package -n kernel-%{kernelversion}.%{patchlevel}-rosa-flow-abi
Summary: Directory to install third-party binary kernel modules for kernels %{kernelversion}.%{patchlevel}.x
Group: System/Kernel and hardware
%description -n kernel-%{kernelversion}.%{patchlevel}-rosa-flow-abi
This package contains a directory to install third-party binary kernel modules for kernels %{kernelversion}.%{patchlevel}.x.
Some vendors provide binary-only kernel modules. They can put them into /lib/modules/%{kernelversion}.%{patchlevel}-rosa-flow-abi.
kmod tools will find them for kernels 5.4.x of "generic" and "nickel" flavours,
but there is no guarantee that these modules will load and work correctly on newer
or older kernels then the ones they were build against.
We call this "flow ABI" because most ABIs are not changed between %{kernelversion}.%{patchlevel}.x releases,
but there are no specific guarantees. ABI may evolve and change.
We highly recommend to use DKMS and build third-party kernel modules from source for every kernel!
This package does nothing, just owns a directory for third-party binary kernel modules.
%files -n kernel-%{kernelversion}.%{patchlevel}-rosa-flow-abi
/lib/modules/%{kernelversion}.%{patchlevel}-rosa-flow-abi
%endif #with flow_abi
################################################
%prep
%setup -q -n %top_dir_name -c
%if %{with uml}
cp -r %{src_dir} %{src_dir}.uml
%endif
cd %src_dir
%autopatch -p1
#
# Setup Begin
#
# Kernel configuration
echo "Creating the kernel configuration file."
# Configs
cp %{SOURCE111} .
cp %{SOURCE112} .
cp %{SOURCE113} .
cp kernel-%{arch_suffix}.config .config
touch %{build_dir}/.config.append
# get rid of unwanted files
find . -name '*~' -o -name '*.orig' -o -name '*.append' -delete
# wipe all .gitignore/.get_maintainer.ignore files
find . -name "*.g*ignore" -delete
# Enable debug info if requested.
sed -i '/CONFIG_DEBUG_INFO/d' .config
%if %build_debug
echo 'CONFIG_DEBUG_INFO=y' >> %{build_dir}/.config.append
echo 'CONFIG_DEBUG_INFO_DWARF4=y' >> %{build_dir}/.config.append
echo 'CONFIG_GDB_SCRIPTS=y' >> %{build_dir}/.config.append
%else
echo 'CONFIG_DEBUG_INFO=n' >> %{build_dir}/.config.append
%endif
sed -i '/CONFIG_MODULE_SIG_FORCE/d' .config
%if %{with oblig_signed_modules}
# Disallow loading not signed modules
# But 0001-ROSA-ima-allow-to-off-modules-signature-check-dynami.patch allows to override this in cmdline
echo CONFIG_MODULE_SIG_FORCE=y >> %{build_dir}/.config.append
%else
echo CONFIG_MODULE_SIG_FORCE=n >> %{build_dir}/.config.append
%endif
sed -i '/CONFIG_MODULE_SIG_KEY/d' .config
# Set path to the key that will be generated later by openssl/libressl
echo CONFIG_MODULE_SIG_KEY=\"%{certs_signing_key_priv_rnd}\" >> %{build_dir}/.config.append
# Set path to one PEM file with all keys that the kernel must trust
sed -i '/CONFIG_SYSTEM_TRUSTED_KEYS/d' .config
echo CONFIG_SYSTEM_TRUSTED_KEYS=\"%{certs_public_keys}\" >> %{build_dir}/.config.append
# Memory wiping
# Introduced in kernel 5.3 by commit 6471384af2a6530696fc0203bafe4de41a23c9ef
# Estimated performance impact is described in the commit
# "Fill newly allocated pages and heap objects with zeroes."
# To enable, add to cmdline: init_on_alloc=1
sed -i '/CONFIG_INIT_ON_ALLOC_DEFAULT_ON/d' .config
echo CONFIG_INIT_ON_ALLOC_DEFAULT_ON=n >> %{build_dir}/.config.append
# "Fill freed pages and heap objects with zeroes"
# To disable, add to cmdline: init_on_free=0
sed -i '/CONFIG_INIT_ON_FREE_DEFAULT_ON/d' .config
%if %{with nickel}
echo CONFIG_INIT_ON_FREE_DEFAULT_ON=y >> %{build_dir}/.config.append
%else
echo CONFIG_INIT_ON_FREE_DEFAULT_ON=n >> %{build_dir}/.config.append
%endif
# Here enabling only either only init_on_free or only init_on_alloc
# makes sense; init_on_alloc is not about protecting information.
# To load kernel keyring in UML
for i in STREEBOG SHA1 SHA256 SHA512 ECRDSA RSA ; do
if ! grep -q "^CONFIG_CRYPTO_${i}=y$" .config; then
sed -i "/CONFIG_CRYPTO_${i}/d" .config
echo "CONFIG_CRYPTO_${i}=y" >> %{build_dir}/.config.append
fi
done
cat %{build_dir}/.config.append >> .config
# Store the config file in the appropriate directory.
CONFIG_DIR=arch/%{arch_type}/configs
mkdir -p "${CONFIG_DIR}"
cfg_file=arch/%{arch_type}/configs/%{arch_suffix}_defconfig-%{flavour}
make ARCH=%{arch_type} oldconfig && \
mv .config ${cfg_file}
echo "Created ${cfg_file}."
# make sure the kernel has the sublevel we know it has...
LC_ALL=C sed -ri "s/^SUBLEVEL.*/SUBLEVEL = %{sublevel}/" Makefile
# get rid of unwanted files
find . -name '*~' -o -name '*.orig' -o -name '*.append' | %kxargs rm -f
find . -name '.get_maintainer.ignore' | %kxargs rm -f
############################################################################
%build
# Ensure that build time generated private keys don't get published
# as e.g. "RPM build root" on ABF!
# Note that ABF sends SIGKILL to rpm-build.sh when the build is terminated;
# in this case trap will not work, but RPM build root also will not be
# saved because rpm-build.sh saves it, but it is SIGKILLed.
# For best security we could store private keys in RAM (not reachable from
# filesystem, so not in /tmp!) and override sth like fopen() by LD_PRELOAD
# to give the content of keys from RAM when a virtual address of a key file
# is accessed, but currently I don't know how to implement this (TODO: ).
_cleanup(){
# Show resulting kernel public keys for debugging
cat "%{src_dir}/%{certs_dir_rnd}/x509_certificate_list" | base64 -d || :
rm -fvr "%{src_dir}/%{certs_dir_rnd}"
%if %{with uml}
cat "%{src_dir}.uml/%{certs_dir_rnd}/x509_certificate_list" | base64 -d || :
rm -fvr "%{src_dir}.uml/%{certs_dir_rnd}"
%endif
}
# Make a trap to delete keys even if %%build fails in the middle
trap "_cleanup" EXIT
rm -rf %{temp_root}
install -d %{temp_root}
cd %src_dir
### Keys for signing kernel modules
# Keys can be generated both manually and automatically,
# let's generate them by ourselves to take full control of the process
# https://www.ibm.com/support/knowledgecenter/en/SSB23S_1.1.0.13/gtps7/cfgcert.html
# See also certs/Makefile in kernel source
mkdir -p "%{certs_dir_rnd}"
# On ABF, %%packager == $username <$email>
# Try to extract email from %%packager if it is set
_get_email(){
# Check that macro %%packager was set and is not empty
if echo '%{packager}' | grep -q 'packager}$' || [ -z "%{packager}" ]
# If was not set or is empty, use default email
then echo 'rpmbuild@rosa.unknown' && return
# Otherwise try to extract email from 'name <email>' or sth else
else temp="$(echo '%{packager}' | tr '[:upper:]' '[:lower:]' | tr ' ' '\n' | tr -d '<>' | grep -E '@.*\..*' | head -n 1)"
fi
# Validate that what we have now is a valid email
# https://stackoverflow.com/a/2138832, https://stackoverflow.com/a/41192733
# Note that we set %%_buildshell to /bin/bash to guarantee the work of this bashism
regex_email="^[a-z0-9!#\$%&'*+/=?^_\`{|}~-]+(\.[a-z0-9!#$%&'*+/=?^_\`{|}~-]+)*@([a-z0-9]([a-z0-9-]*[a-z0-9])?\.)+[a-z0-9]([a-z0-9-]*[a-z0-9])?\$"
if [[ "$temp" =~ ${regex_email} ]]
# If it is, use it
then echo "$temp" && return
# Otherwise use default email
else echo 'rpmbuild@rosa.unknown' && return
fi
# If script above has not return'ed for any reason,
# e.g. because of non-bash shell being not able to
# process regexp, use default email
echo 'rpmbuild@rosa.unknown'
}
email="$(_get_email)"
cat <<EOF > "%{certs_key_config_rnd}"
[ req ]
prompt = no
string_mask = utf8only
#default_keyfile = %{certs_signing_key_priv_rnd}
distinguished_name = req_distinguished_name
x509_extensions = myexts
[ req_distinguished_name ]
organizationName = %{vendor} rpmbuild
commonName = Build time autogenerated @ALGO@ kernel key
emailAddress = ${email}
[ myexts ]
basicConstraints=critical,CA:FALSE
keyUsage=digitalSignature
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid
EOF
cat "%{certs_key_config_rnd}"
sed -e 's,@ALGO@,RSA,g' "%{certs_key_config_rnd}" > "%{certs_key_config_rnd}.RSA"
sed -e 's,@ALGO@,GOST R 34.10-2012,g' "%{certs_key_config_rnd}" > "%{certs_key_config_rnd}.GOST"
# avoid using the template
rm -f "%{certs_key_config_rnd}"
_libressl_gen_key(){
if [ "$GOST_KEY" = 1 ]
then
lssl_req_gost_args="\
-newkey gost2001 \
-pkeyopt dgst:streebog512 -pkeyopt paramset:A \
-streebog512"
OUT="%{certs_signing_key_priv_rnd}.GOST"
CONFIG="%{certs_key_config_rnd}.GOST"
else
lssl_req_gost_args=""
OUT="%{certs_signing_key_priv_rnd}.RSA"
CONFIG="%{certs_key_config_rnd}.RSA"
fi
libressl req -new -nodes -utf8 -batch \
$lssl_req_gost_args \
-days 109500 \
-x509 -config "$CONFIG" \
-out "$OUT" \
-keyout "$OUT"
# Verify
if [ "$GOST_KEY" = 1 ]; then
libressl x509 -in "%{certs_signing_key_priv_rnd}.GOST" -text -noout \
| grep -E 'Signature Algorithm:.*GOST R 34.10-2012'
libressl x509 -in "%{certs_signing_key_priv_rnd}.GOST" -text -noout \
| grep -E 'Digest Algorithm:.*GOST R 34-11-2012'
libressl x509 -in "%{certs_signing_key_priv_rnd}.GOST" -text -noout \
| grep -E 'Public Key Algorithm:.*GOST R 34.10-2012'
fi
}
GOST_KEY=0 _libressl_gen_key
GOST_KEY=1 _libressl_gen_key
# Fake CONFIG_MODULE_SIG_KEY to make build scripts happy
cp -v "%{certs_signing_key_priv_rnd}.RSA" "%{certs_signing_key_priv_rnd}"
# Strip public parts from the generated PEMs
sed -n \
'/^-----BEGIN CERTIFICATE-----$/,/^-----END CERTIFICATE-----$/p' \
"%{certs_signing_key_priv_rnd}.GOST" \
"%{certs_signing_key_priv_rnd}.RSA" \
> "%{certs_public_keys}"
# link sign-file and extract-cert with LibreSSL instead of OpenSSL
if [ $? != 0 ] ; then exit $? ; fi
sed -i %{src_dir}/scripts/Makefile \
%if %{with uml}
%{src_dir}.uml/scripts/Makefile \
%endif
-e "s, libcrypto , libressl-libcrypto ,g"
%if %{with additional_keys}
# Add additional public RSA keys to the list of trusted keys for kernel modules
# Build kernel --without additional_keys if you do not want to trust them
cat %{expand:%(for i in `seq 1 12`; do echo "%%SOURCE$((200+${i}))" | tr "\n" " "; done)} \
>> "%{certs_public_keys}"
%endif #endif additional_keys
cat %{certs_public_keys}
# .config
%smake -s mrproper
cp arch/%{arch_type}/configs/%{arch_suffix}_defconfig-%{flavour} .config
# make sure EXTRAVERSION says what we want it to say
LC_ALL=C sed -ri "s/^EXTRAVERSION.*/EXTRAVERSION = -%{flavour}-%{buildrpmrel}/" Makefile
# build the kernel
echo "Building kernel %{kver_full}"
TARGETS="all"
# need to install dtbs to proper boot arm64 devices
%ifarch aarch64
TARGETS="$TARGETS dtbs"
%endif
%kmake V=1 -s $TARGETS
# Install modules
mkdir -p %{temp_modules}/%{kver_full}
%smake INSTALL_MOD_PATH=%{temp_root} KERNELRELEASE=%{kver_full} modules_install
%if %{with binary_extra_modules}
# Build and install procedure is specific to each Makefile from kernmel-source-* packages
# See also: https://www.kernel.org/doc/html/latest/kbuild/modules.html
# Copy directory because write permissions are required
# `make modules_install` must be done before this, otherwise these copied files will be deleted
cp -r "$(rpm -q --qf '/usr/src/rtl8821ce-%%{VERSION}-%%{RELEASE}' kernel-source-rtl8821ce)" kernel-source-rtl8821ce
pushd kernel-source-rtl8821ce
%kmake KSRC=%{src_dir} M="$PWD"
mkdir -p %{temp_modules}/%{kver_full}/kernel/net/wireless/
cp 8821ce.ko %{temp_modules}/%{kver_full}/kernel/net/wireless/8821ce.ko
popd
rm -fr kernel-source-rtl8821ce
cp -r "$(rpm -q --qf '/usr/src/tripso-%%{VERSION}-%%{RELEASE}' kernel-source-tripso)" kernel-source-tripso
pushd kernel-source-tripso
%kmake KDIR=%{src_dir}
mkdir -p %{temp_modules}/%{kver_full}/kernel/net
cp xt_TRIPSO.ko %{temp_modules}/%{kver_full}/kernel/net/
popd
rm -fr kernel-source-tripso
cp -r "$(rpm -q --qf '/usr/src/ipt-so-%%{VERSION}-%%{RELEASE}' kernel-source-ipt-so)" kernel-source-ipt-so
pushd kernel-source-ipt-so
%kmake KDIR=%{src_dir}
mkdir -p %{temp_modules}/%{kver_full}/kernel/net
cp xt_so.ko %{temp_modules}/%{kver_full}/kernel/net/
popd
rm -fr kernel-source-ipt-so
%if %{with binary_shredder}
cp -r "$(rpm -q --qf '/usr/src/shredder-kernel-%%{VERSION}-%%{RELEASE}' kernel-source-shredder-kernel)" kernel-source-shredder-kernel
pushd kernel-source-shredder-kernel
%kmake KERNEL_PATH=%{src_dir}
mkdir -p %{temp_modules}/%{kver_full}/kernel/extra/
cp shredder-kernel.ko %{temp_modules}/%{kver_full}/kernel/extra/
popd
rm -fr kernel-source-shredder-kernel
%endif
%if %{with binary_virtualbox_host}
# build commands for virtualbox are based on the ones from the virtualbox package
cp -r "$(rpm -q --qf '/usr/src/virtualbox-%%{VERSION}-%%{RELEASE}' kernel-source-virtualbox)" kernel-source-virtualbox
mkdir -p %{temp_modules}/%{kver_full}/kernel/misc/
pushd kernel-source-virtualbox
make -C vboxdrv KERN_DIR=%{src_dir} KERN_VER=%{kver_full}
cp -fv vboxdrv/Module.symvers vboxnetflt
cp -fv vboxdrv/Module.symvers vboxnetadp
make -C vboxnetflt KERN_DIR=%{src_dir} KERN_VER=%{kver_full}
make -C vboxnetadp KERN_DIR=%{src_dir} KERN_VER=%{kver_full}
cp -fv vboxnetadp/Module.symvers vboxpci/
make -C vboxpci KERN_DIR=%{src_dir} KERN_VER=%{kver_full}
for i in vboxnetflt vboxnetadp vboxdrv vboxpci
do
cp -v "${i}/${i}.ko" %{temp_modules}/%{kver_full}/kernel/misc/
done
popd
%endif
%if %{with nickel}
# rosa-test-suite uses /sr/src/xxx-version, not /usr/src/xxx-version-release
cp -r "$(rpm -q --qf '/usr/src/rosa-test-suite-%%{VERSION}' kernel-source-rosa-test-suite)" kernel-source-rosa-test-suite
pushd kernel-source-rosa-test-suite
mkdir -p %{temp_modules}/%{kver_full}/kernel/misc/
for i in nlkm memfreetest pcietest
do
cat << EOF > Makefile
obj-m := ${i}.o
all:
make -C %{src_dir} M=\$(PWD) modules
EOF
%kmake
cp -fv ${i}.ko %{temp_modules}/%{kver_full}/kernel/misc/
done
popd
%endif #with nickel <- with binary_extra_modules
%endif #with binary_extra_modules
%if %{with uml}
cp -rv %{certs_dir_rnd} %{src_dir}.uml/
pushd %{src_dir}.uml
%kmake ARCH=um defconfig
%kmake ARCH=um linux
install -Dm0755 linux %{temp_root}%{_bindir}/linux-uml-%{kver_full}
#rm -fv linux
%kmake V=1 ARCH=um modules
mkdir -p %{temp_root}/lib/modules-uml/%{kver_full}/
%kmake ARCH=um INSTALL_MOD_PATH=%{temp_root}/lib/modules-uml/%{kver_full}/ modules_install
popd
%endif
install -d %{temp_boot}
install -m 644 System.map %{temp_boot}/System.map-%{kver_full}
install -m 644 .config %{temp_boot}/config-%{kver_full}
xz -c Module.symvers > %{temp_boot}/symvers-%{kver_full}.xz
%ifarch aarch64
cp -f arch/arm64/boot/Image.gz %{temp_boot}/vmlinuz-%{kver_full}
%else
cp -f arch/%{arch_type}/boot/bzImage %{temp_boot}/vmlinuz-%{kver_full}
%endif
# headers
%if %{build_headers}
%make INSTALL_HDR_PATH=%{temp_root}%{_prefix} KERNELRELEASE=%{kver_full} headers_install
find %{temp_root}%{_prefix} -name .install -or -name ..install.cmd | %kxargs rm -f
%endif
# remove /lib/firmware, we use a separate linux-firmware package
rm -rf %{temp_root}/lib/firmware
# Prepare the files for kernel*-devel
%if %build_devel
mkdir -p %{temp_devel_root}
for i in $(find . -name 'Makefile*'); do cp -R --parents $i %{temp_devel_root}; done
for i in $(find . -name 'Kconfig*' -o -name 'Kbuild*'); do cp -R --parents $i %{temp_devel_root}; done
cp -fR include %{temp_devel_root}
cp -fR scripts %{temp_devel_root}
cp -fR kernel/bounds.c %{temp_devel_root}/kernel
cp -fR kernel/time/timeconst.bc %{temp_devel_root}/kernel/time
cp -fR tools %{temp_devel_root}/
cp -fR arch/%{arch_type}/kernel/asm-offsets.{c,s} %{temp_devel_root}/arch/%{arch_type}/kernel/
%ifarch %{ix86} %{x86_64}
cp -fR arch/%{arch_type}/kernel/asm-offsets_{32,64}.c %{temp_devel_root}/arch/%{arch_type}/kernel/
cp -fR arch/%{arch_type}/purgatory/* %{temp_devel_root}/arch/%{arch_type}/purgatory/
# needed for arch/x86/purgatory
cp -fR lib/*.h lib/*.c %{temp_devel_root}/lib/
cp -fR arch/%{arch_type}/entry/syscalls/syscall* %{temp_devel_root}/arch/%{arch_type}/entry/syscalls/
cp -fR arch/%{arch_type}/tools %{temp_devel_root}/arch/%{arch_type}/
# needed for kexec
cp -fR arch/%{arch_type}/boot/*.h %{temp_devel_root}/arch/%{arch_type}/boot/
cp -fR arch/%{arch_type}/boot/*.c %{temp_devel_root}/arch/%{arch_type}/boot/
%endif
cp -fR arch/%{arch_type}/include %{temp_devel_root}/arch/%{arch_type}/
cp -fR .config Module.symvers %{temp_devel_root}
# Needed for truecrypt build (Danny)
cp -fR drivers/md/dm.h %{temp_devel_root}/drivers/md/
# Needed for lirc_gpio (#39004)
cp -fR drivers/media/pci/bt8xx/bttv{,p}.h %{temp_devel_root}/drivers/media/pci/bt8xx/
cp -fR drivers/media/pci/bt8xx/bt848.h %{temp_devel_root}/drivers/media/pci/bt8xx/
cp -fR drivers/media/common/btcx-risc.h %{temp_devel_root}/drivers/media/common/
# add acpica header files, needed for fglrx build
cp -fR drivers/acpi/acpica/*.h %{temp_devel_root}/drivers/acpi/acpica/
# aufs2 has a special file needed
cp -fR fs/aufs/magic.mk %{temp_devel_root}/fs/aufs
# SELinux needs security/selinux/include
cp -fR security/selinux/include %{temp_devel_root}/security/selinux
for i in alpha arc avr32 blackfin c6x cris csky frv h8300 hexagon ia64 m32r m68k m68knommu metag microblaze \
mips mn10300 nds32 nios2 openrisc parisc powerpc riscv s390 score sh sparc tile unicore32 xtensa; do
rm -rf %{temp_devel_root}/arch/$i
done
# Clean the scripts tree, and make sure everything is ok (sanity check)
# running prepare+scripts (tree was already "prepared" in build)
pushd %{temp_devel_root}
%smake V=1 -s clean ARCH=%{arch_type}
popd
rm -f %{temp_devel_root}/.config.old
# fix permissions
chmod -R a+rX %{temp_devel_root}
# disable mrproper in -devel rpms
patch -p1 --fuzz=0 -d %{temp_devel_root} -i %{SOURCE2}
# endif build_devel
%endif
# Manage the files with debug info, provide the debug links in the
# kernel modules.
%if %build_debug
install -m 644 vmlinux %{temp_boot}/vmlinux-%{kver_full}
kernel_debug_files=../kernel_debug_files.%{flavour}
echo "%{_bootdir}/vmlinux-%{kver_full}" >> $kernel_debug_files
find %{temp_modules}/%{kver_full}/kernel \
-name "*.ko" | \
%kxargs -I '{}' objcopy --only-keep-debug '{}' '{}'.debug
find %{temp_modules}/%{kver_full}/kernel \
-name "*.ko" | %kxargs -I '{}' \
sh -c 'cd `dirname {}`; \
objcopy --add-gnu-debuglink=`basename {}`.debug \
--strip-debug `basename {}`'
pushd %{temp_modules}
find %{kver_full}/kernel -name "*.ko.debug" > debug_module_list
popd
cat %{temp_modules}/debug_module_list | \
sed 's|\(.*\)|%{_modulesdir}/\1|' >> $kernel_debug_files
cat %{temp_modules}/debug_module_list | \
sed 's|\(.*\)|%exclude %{_modulesdir}/\1|' \
>> ../kernel_exclude_debug_files.%{flavour}
rm -f %{temp_modules}/debug_module_list
# endif build_debug
%endif
# https://patchwork.kernel.org/patch/11446123/
_libressl_sign(){
if [ ! -f "$1" ]; then
echo "No file $1"
return 0
fi
f="$1"
%if %{with gost_sign}
%{src_dir}/scripts/sign-file streebog512 \
"%{certs_signing_key_priv_rnd}.GOST" "%{certs_signing_key_priv_rnd}.GOST" "$f"
%else
%{src_dir}/scripts/sign-file sha512 \
"%{certs_signing_key_priv_rnd}.RSA" "%{certs_signing_key_priv_rnd}.RSA" "$f"
%endif
unset f
}
export -f _libressl_sign
find %{temp_modules}/%{kver_full}/kernel \
%if %{with uml}
%{temp_root}/lib/modules-uml/%{kver_full} \
%endif
-name '*.ko' -print0 | sort -u | \
xargs --null -P "$(nproc)" -I {} "$SHELL" -e -x -c 'if ! _libressl_sign "{}"; \
then echo Failed _libressl_sign on "{}" && exit 1; fi'
# Create the list of files for the kernel.
kernel_files=../kernel_files.%{flavour}
cat > $kernel_files <<EOF
%{_bootdir}/System.map-%{kver_full}
%{_bootdir}/symvers-%{kver_full}.xz
%{_bootdir}/config-%{kver_full}
%{_bootdir}/vmlinuz-%{kver_full}
%{_modulesdir}/%{kver_full}/kernel
%if %{with binary_extra_modules}
# 8821ce.ko.debug will not be excluded and will be in the main debug subpackage
%exclude %{_modulesdir}/%{kver_full}/kernel/net/wireless/8821ce.ko%{kmod_suffix}
%if %{with binary_shredder}
%exclude %{_modulesdir}/%{kver_full}/kernel/extra/shredder-kernel.ko%{kmod_suffix}
%endif
%if %{with binary_virtualbox_host}
# vbox host modules may be built here (vboxnetflt vboxnetadp vboxdrv vboxpci)
# vbox guest modules are in the mainline kernel now (vboxvideo vboxguest vboxsf)
%exclude %{_modulesdir}/%{kver_full}/kernel/misc/vbox*.ko%{kmod_suffix}
%endif
%exclude %{_modulesdir}/%{kver_full}/kernel/net/xt_TRIPSO.ko%{kmod_suffix}
%exclude %{_modulesdir}/%{kver_full}/kernel/net/xt_so.ko%{kmod_suffix}
%if %{with nickel}
%exclude %{_modulesdir}/%{kver_full}/kernel/misc/nlkm.ko%{kmod_suffix}
%exclude %{_modulesdir}/%{kver_full}/kernel/misc/memfreetest.ko%{kmod_suffix}
%exclude %{_modulesdir}/%{kver_full}/kernel/misc/pcietest.ko%{kmod_suffix}
%endif
%endif #with binary_extra_modules
%{_modulesdir}/%{kver_full}/modules.*
EOF
%if %build_debug
cat ../kernel_exclude_debug_files.%{flavour} >> $kernel_files
%endif
# set extraversion to match srpm to get nice version reported by the tools
LC_ALL=C sed -ri "s/^EXTRAVERSION.*/EXTRAVERSION = -%{fullrpmrel}/" Makefile
%if %{build_perf}
%smake -C tools/perf -s PYTHON=%{__python3} HAVE_CPLUS_DEMANGLE=1 WERROR=0 prefix=%{_prefix} lib=%{_lib} NO_GTK2=1 all
%smake -C tools/perf -s prefix=%{_prefix} lib=%{_lib} NO_GTK2=1 man
%endif
%if %{build_cpupower}
# make sure version-gen.sh is executable.
chmod +x tools/power/cpupower/utils/version-gen.sh
%make -C tools/power/cpupower CPUFREQ_BENCH=false
%endif
_cleanup
############################################################################
%install
cd %src_dir
# We want to be able to test several times the install part
rm -rf %{buildroot}
cp -a %{temp_root} %{buildroot}
# Multithreaded verification that every kernel module
# has a signature attached to it
mkdir -p "%{certs_dir_rnd}"
touch %{certs_verify_tmp}
_verify_signature(){
if [ -z "$1" ] || [ ! -f "$1" ]; then return; fi
if hexdump -C "$1" | rev | cut -f 2 -d '|' | rev | tr -d '\n' | \
grep -q '~Module signature appended~'
then
if [ -f %{certs_verify_tmp} ]; then
rm -f %{certs_verify_tmp}
fi
else
echo "ERROR: Module $1 has no signature attached to it!"
exit 1
fi
}
export -f _verify_signature
find %{target_modules} \
%if %{with uml}
%{buildroot}/lib/modules-uml/%{kver_full} \
%endif
-name '*.ko' -print0 | sort -u | \
xargs --null -P "$(nproc)" -I {} "$SHELL" -c '_verify_signature "{}"'
if [ -f %{certs_verify_tmp} ]; then
echo "ERROR: seems that signatures of none modules were verified!"
exit 1
fi
rm -f %{certs_verify_tmp}
# compressing modules
%if %{build_modxz}
find %{target_modules} -name "*.ko" | %kxargs xz -6e
%else
find %{target_modules} -name "*.ko" | %kxargs gzip -9
%endif
pushd %{target_modules}
for i in *; do
rm -f $i/build $i/source
ln -sf /usr/src/linux-$i $i/build
ln -sf /usr/src/linux-$i $i/source
done
# sniff, if we compressed all the modules, we change the stamp :(
# we really need the depmod -ae here
for i in *; do
/sbin/depmod -ae -b %{buildroot} -F %{target_boot}/System.map-$i $i
echo $?
done
# We used to create modules.description files which contained the
# description strings for the modules as shown by modinfo. These files
# are unlikely to be used right now, so create them (in case some old tool
# checks for their existence) but keep them empty.
for i in *; do
touch $i/modules.description
done
popd
# need to set extraversion to match srpm again to avoid rebuild
LC_ALL=C sed -ri "s/^EXTRAVERSION.*/EXTRAVERSION = -%{fullrpmrel}/" Makefile
%if %{build_perf}
# perf tool binary and supporting scripts/binaries
make -C tools/perf -s V=1 DESTDIR=%{buildroot} WERROR=0 HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} lib=%{_lib} install
# Versionize shebang (#!/usr/bin/env python -> #!/usr/bin/python3)
sed -i -e '1 s,^.*$,#!%{__python3},' %{buildroot}%{_prefix}/libexec/perf-core/scripts/python/exported-sql-viewer.py
# perf man pages (note: implicit rpm magic compresses them later)
make -C tools/perf -s V=1 DESTDIR=%{buildroot} WERROR=0 HAVE_CPLUS_DEMANGLE=1 prefix=%{_prefix} install-man
%endif
%if %{build_cpupower}
make -C tools/power/cpupower DESTDIR=%{buildroot} libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
rm -f %{buildroot}%{_libdir}/*.{a,la}
%find_lang cpupower
mv cpupower.lang ../
chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
install -m644 %{SOURCE50} %{buildroot}%{_unitdir}/cpupower.service
install -m644 %{SOURCE53} %{buildroot}%{_unitdir}/cpupower.path
install -m644 %{SOURCE51} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
install -m755 %{SOURCE52} %{buildroot}%{_bindir}/cpupower-start.sh
%endif
# delete junk
rm -fr %{buildroot}%{_usr}/src/*/kernel-source-*
%if %{with flow_abi}
# Prefix with "zzz" to put this directory into the end of search list
# and avoid tricks with depmod configs
mkdir -p %{buildroot}/lib/modules/%{kernelversion}.%{patchlevel}-rosa-flow-abi
ln -s /lib/modules/%{kernelversion}.%{patchlevel}-rosa-flow-abi %{buildroot}%{_modulesdir}/%{kver_full}/kernel/zzz-%{kernelversion}.%{patchlevel}-rosa-flow-abi
%endif
Reference in a new issue View git blame Copy permalink