Djam/kernel-5.15
1
0
Fork 0
mirror of https://abf.rosa.ru/djam/kernel-5.15.git synced 2025-02-24 11:02:55 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
kernel-5.15/0004-Turn-BFQ-v7r11-into-BFQ-v8r4-for-4.8.0.patch
Evgenii Shatokhin 0260460708 Updated to version 4.8.4, the first take 
Besides the upstream kernel update to 4.8.x, the following changes were
made:

* BFQ was updated to v8r4
* AUFS was updated to version 4.8-20161010
2016-10-23 22:01:06 +03:00

7392 lines
267 KiB
Diff
Raw Blame History

From ec8981e245dfe24bc6a80207e832ca9be18fd39d Mon Sep 17 00:00:00 2001
From: Paolo Valente <paolo.valente@linaro.org>
Date: Tue, 17 May 2016 08:28:04 +0200
Subject: [PATCH 4/4] Turn BFQ-v7r11 into BFQ-v8r4 for 4.8.0
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
---
block/Kconfig.iosched | 2 +-
block/bfq-cgroup.c | 495 ++++----
block/bfq-iosched.c | 3230 +++++++++++++++++++++++++++++++------------------
block/bfq-sched.c | 480 ++++++--
block/bfq.h | 747 ++++++------
5 files changed, 3073 insertions(+), 1881 deletions(-)
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index f78cd1a..6d92579 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -53,7 +53,7 @@ config IOSCHED_BFQ
config BFQ_GROUP_IOSCHED
bool "BFQ hierarchical scheduling support"
- depends on CGROUPS && IOSCHED_BFQ=y
+ depends on IOSCHED_BFQ && BLK_CGROUP
default n
---help---
Enable hierarchical scheduling in BFQ, using the blkio controller.
diff --git a/block/bfq-cgroup.c b/block/bfq-cgroup.c
index 0367996..b50ae8e 100644
--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -7,7 +7,9 @@
* Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
* Paolo Valente <paolo.valente@unimore.it>
*
- * Copyright (C) 2010 Paolo Valente <paolo.valente@unimore.it>
+ * Copyright (C) 2015 Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2016 Paolo Valente <paolo.valente@linaro.org>
*
* Licensed under the GPL-2 as detailed in the accompanying COPYING.BFQ
* file.
@@ -163,8 +165,6 @@ static struct bfq_group *blkg_to_bfqg(struct blkcg_gq *blkg)
{
struct blkg_policy_data *pd = blkg_to_pd(blkg, &blkcg_policy_bfq);
- BUG_ON(!pd);
-
return pd_to_bfqg(pd);
}
@@ -208,59 +208,49 @@ static void bfqg_put(struct bfq_group *bfqg)
static void bfqg_stats_update_io_add(struct bfq_group *bfqg,
struct bfq_queue *bfqq,
- int rw)
+ int op, int op_flags)
{
- blkg_rwstat_add(&bfqg->stats.queued, rw, 1);
+ blkg_rwstat_add(&bfqg->stats.queued, op, op_flags, 1);
bfqg_stats_end_empty_time(&bfqg->stats);
if (!(bfqq == ((struct bfq_data *)bfqg->bfqd)->in_service_queue))
bfqg_stats_set_start_group_wait_time(bfqg, bfqq_group(bfqq));
}
-static void bfqg_stats_update_io_remove(struct bfq_group *bfqg, int rw)
-{
- blkg_rwstat_add(&bfqg->stats.queued, rw, -1);
-}
-
-static void bfqg_stats_update_io_merged(struct bfq_group *bfqg, int rw)
+static void bfqg_stats_update_io_remove(struct bfq_group *bfqg, int op,
+ int op_flags)
{
- blkg_rwstat_add(&bfqg->stats.merged, rw, 1);
+ blkg_rwstat_add(&bfqg->stats.queued, op, op_flags, -1);
}
-static void bfqg_stats_update_dispatch(struct bfq_group *bfqg,
- uint64_t bytes, int rw)
+static void bfqg_stats_update_io_merged(struct bfq_group *bfqg, int op,
+ int op_flags)
{
- blkg_stat_add(&bfqg->stats.sectors, bytes >> 9);
- blkg_rwstat_add(&bfqg->stats.serviced, rw, 1);
- blkg_rwstat_add(&bfqg->stats.service_bytes, rw, bytes);
+ blkg_rwstat_add(&bfqg->stats.merged, op, op_flags, 1);
}
static void bfqg_stats_update_completion(struct bfq_group *bfqg,
- uint64_t start_time, uint64_t io_start_time, int rw)
+ uint64_t start_time, uint64_t io_start_time, int op,
+ int op_flags)
{
struct bfqg_stats *stats = &bfqg->stats;
unsigned long long now = sched_clock();
if (time_after64(now, io_start_time))
- blkg_rwstat_add(&stats->service_time, rw, now - io_start_time);
+ blkg_rwstat_add(&stats->service_time, op, op_flags,
+ now - io_start_time);
if (time_after64(io_start_time, start_time))
- blkg_rwstat_add(&stats->wait_time, rw,
+ blkg_rwstat_add(&stats->wait_time, op, op_flags,
io_start_time - start_time);
}
/* @stats = 0 */
static void bfqg_stats_reset(struct bfqg_stats *stats)
{
- if (!stats)
- return;
-
/* queued stats shouldn't be cleared */
- blkg_rwstat_reset(&stats->service_bytes);
- blkg_rwstat_reset(&stats->serviced);
blkg_rwstat_reset(&stats->merged);
blkg_rwstat_reset(&stats->service_time);
blkg_rwstat_reset(&stats->wait_time);
blkg_stat_reset(&stats->time);
- blkg_stat_reset(&stats->unaccounted_time);
blkg_stat_reset(&stats->avg_queue_size_sum);
blkg_stat_reset(&stats->avg_queue_size_samples);
blkg_stat_reset(&stats->dequeue);
@@ -270,19 +260,16 @@ static void bfqg_stats_reset(struct bfqg_stats *stats)
}
/* @to += @from */
-static void bfqg_stats_merge(struct bfqg_stats *to, struct bfqg_stats *from)
+static void bfqg_stats_add_aux(struct bfqg_stats *to, struct bfqg_stats *from)
{
if (!to || !from)
return;
/* queued stats shouldn't be cleared */
- blkg_rwstat_add_aux(&to->service_bytes, &from->service_bytes);
- blkg_rwstat_add_aux(&to->serviced, &from->serviced);
blkg_rwstat_add_aux(&to->merged, &from->merged);
blkg_rwstat_add_aux(&to->service_time, &from->service_time);
blkg_rwstat_add_aux(&to->wait_time, &from->wait_time);
blkg_stat_add_aux(&from->time, &from->time);
- blkg_stat_add_aux(&to->unaccounted_time, &from->unaccounted_time);
blkg_stat_add_aux(&to->avg_queue_size_sum, &from->avg_queue_size_sum);
blkg_stat_add_aux(&to->avg_queue_size_samples,
&from->avg_queue_size_samples);
@@ -311,10 +298,8 @@ static void bfqg_stats_xfer_dead(struct bfq_group *bfqg)
if (unlikely(!parent))
return;
- bfqg_stats_merge(&parent->dead_stats, &bfqg->stats);
- bfqg_stats_merge(&parent->dead_stats, &bfqg->dead_stats);
+ bfqg_stats_add_aux(&parent->stats, &bfqg->stats);
bfqg_stats_reset(&bfqg->stats);
- bfqg_stats_reset(&bfqg->dead_stats);
}
static void bfq_init_entity(struct bfq_entity *entity,
@@ -335,15 +320,11 @@ static void bfq_init_entity(struct bfq_entity *entity,
static void bfqg_stats_exit(struct bfqg_stats *stats)
{
- blkg_rwstat_exit(&stats->service_bytes);
- blkg_rwstat_exit(&stats->serviced);
blkg_rwstat_exit(&stats->merged);
blkg_rwstat_exit(&stats->service_time);
blkg_rwstat_exit(&stats->wait_time);
blkg_rwstat_exit(&stats->queued);
- blkg_stat_exit(&stats->sectors);
blkg_stat_exit(&stats->time);
- blkg_stat_exit(&stats->unaccounted_time);
blkg_stat_exit(&stats->avg_queue_size_sum);
blkg_stat_exit(&stats->avg_queue_size_samples);
blkg_stat_exit(&stats->dequeue);
@@ -354,15 +335,11 @@ static void bfqg_stats_exit(struct bfqg_stats *stats)
static int bfqg_stats_init(struct bfqg_stats *stats, gfp_t gfp)
{
- if (blkg_rwstat_init(&stats->service_bytes, gfp) ||
- blkg_rwstat_init(&stats->serviced, gfp) ||
- blkg_rwstat_init(&stats->merged, gfp) ||
+ if (blkg_rwstat_init(&stats->merged, gfp) ||
blkg_rwstat_init(&stats->service_time, gfp) ||
blkg_rwstat_init(&stats->wait_time, gfp) ||
blkg_rwstat_init(&stats->queued, gfp) ||
- blkg_stat_init(&stats->sectors, gfp) ||
blkg_stat_init(&stats->time, gfp) ||
- blkg_stat_init(&stats->unaccounted_time, gfp) ||
blkg_stat_init(&stats->avg_queue_size_sum, gfp) ||
blkg_stat_init(&stats->avg_queue_size_samples, gfp) ||
blkg_stat_init(&stats->dequeue, gfp) ||
@@ -386,11 +363,27 @@ static struct bfq_group_data *blkcg_to_bfqgd(struct blkcg *blkcg)
return cpd_to_bfqgd(blkcg_to_cpd(blkcg, &blkcg_policy_bfq));
}
+static struct blkcg_policy_data *bfq_cpd_alloc(gfp_t gfp)
+{
+ struct bfq_group_data *bgd;
+
+ bgd = kzalloc(sizeof(*bgd), GFP_KERNEL);
+ if (!bgd)
+ return NULL;
+ return &bgd->pd;
+}
+
static void bfq_cpd_init(struct blkcg_policy_data *cpd)
{
struct bfq_group_data *d = cpd_to_bfqgd(cpd);
- d->weight = BFQ_DEFAULT_GRP_WEIGHT;
+ d->weight = cgroup_subsys_on_dfl(io_cgrp_subsys) ?
+ CGROUP_WEIGHT_DFL : BFQ_WEIGHT_LEGACY_DFL;
+}
+
+static void bfq_cpd_free(struct blkcg_policy_data *cpd)
+{
+ kfree(cpd_to_bfqgd(cpd));
}
static struct blkg_policy_data *bfq_pd_alloc(gfp_t gfp, int node)
@@ -401,8 +394,7 @@ static struct blkg_policy_data *bfq_pd_alloc(gfp_t gfp, int node)
if (!bfqg)
return NULL;
- if (bfqg_stats_init(&bfqg->stats, gfp) ||
- bfqg_stats_init(&bfqg->dead_stats, gfp)) {
+ if (bfqg_stats_init(&bfqg->stats, gfp)) {
kfree(bfqg);
return NULL;
}
@@ -410,27 +402,20 @@ static struct blkg_policy_data *bfq_pd_alloc(gfp_t gfp, int node)
return &bfqg->pd;
}
-static void bfq_group_set_parent(struct bfq_group *bfqg,
- struct bfq_group *parent)
+static void bfq_pd_init(struct blkg_policy_data *pd)
{
+ struct blkcg_gq *blkg;
+ struct bfq_group *bfqg;
+ struct bfq_data *bfqd;
struct bfq_entity *entity;
+ struct bfq_group_data *d;
- BUG_ON(!parent);
- BUG_ON(!bfqg);
- BUG_ON(bfqg == parent);
-
+ blkg = pd_to_blkg(pd);
+ BUG_ON(!blkg);
+ bfqg = blkg_to_bfqg(blkg);
+ bfqd = blkg->q->elevator->elevator_data;
entity = &bfqg->entity;
- entity->parent = parent->my_entity;
- entity->sched_data = &parent->sched_data;
-}
-
-static void bfq_pd_init(struct blkg_policy_data *pd)
-{
- struct blkcg_gq *blkg = pd_to_blkg(pd);
- struct bfq_group *bfqg = blkg_to_bfqg(blkg);
- struct bfq_data *bfqd = blkg->q->elevator->elevator_data;
- struct bfq_entity *entity = &bfqg->entity;
- struct bfq_group_data *d = blkcg_to_bfqgd(blkg->blkcg);
+ d = blkcg_to_bfqgd(blkg->blkcg);
entity->orig_weight = entity->weight = entity->new_weight = d->weight;
entity->my_sched_data = &bfqg->sched_data;
@@ -448,70 +433,53 @@ static void bfq_pd_free(struct blkg_policy_data *pd)
struct bfq_group *bfqg = pd_to_bfqg(pd);
bfqg_stats_exit(&bfqg->stats);
- bfqg_stats_exit(&bfqg->dead_stats);
-
return kfree(bfqg);
}
-/* offset delta from bfqg->stats to bfqg->dead_stats */
-static const int dead_stats_off_delta = offsetof(struct bfq_group, dead_stats) -
- offsetof(struct bfq_group, stats);
-
-/* to be used by recursive prfill, sums live and dead stats recursively */
-static u64 bfqg_stat_pd_recursive_sum(struct blkg_policy_data *pd, int off)
+static void bfq_pd_reset_stats(struct blkg_policy_data *pd)
{
- u64 sum = 0;
+ struct bfq_group *bfqg = pd_to_bfqg(pd);
- sum += blkg_stat_recursive_sum(pd_to_blkg(pd), &blkcg_policy_bfq, off);
- sum += blkg_stat_recursive_sum(pd_to_blkg(pd), &blkcg_policy_bfq,
- off + dead_stats_off_delta);
- return sum;
+ bfqg_stats_reset(&bfqg->stats);
}
-/* to be used by recursive prfill, sums live and dead rwstats recursively */
-static struct blkg_rwstat
-bfqg_rwstat_pd_recursive_sum(struct blkg_policy_data *pd, int off)
+static void bfq_group_set_parent(struct bfq_group *bfqg,
+ struct bfq_group *parent)
{
- struct blkg_rwstat a, b;
+ struct bfq_entity *entity;
- a = blkg_rwstat_recursive_sum(pd_to_blkg(pd), &blkcg_policy_bfq, off);
- b = blkg_rwstat_recursive_sum(pd_to_blkg(pd), &blkcg_policy_bfq,
- off + dead_stats_off_delta);
- blkg_rwstat_add_aux(&a, &b);
- return a;
+ BUG_ON(!parent);
+ BUG_ON(!bfqg);
+ BUG_ON(bfqg == parent);
+
+ entity = &bfqg->entity;
+ entity->parent = parent->my_entity;
+ entity->sched_data = &parent->sched_data;
}
-static void bfq_pd_reset_stats(struct blkg_policy_data *pd)
+static struct bfq_group *bfq_lookup_bfqg(struct bfq_data *bfqd,
+ struct blkcg *blkcg)
{
- struct bfq_group *bfqg = pd_to_bfqg(pd);
+ struct blkcg_gq *blkg;
- bfqg_stats_reset(&bfqg->stats);
- bfqg_stats_reset(&bfqg->dead_stats);
+ blkg = blkg_lookup(blkcg, bfqd->queue);
+ if (likely(blkg))
+ return blkg_to_bfqg(blkg);
+ return NULL;
}
-static struct bfq_group *bfq_find_alloc_group(struct bfq_data *bfqd,
- struct blkcg *blkcg)
+static struct bfq_group *bfq_find_set_group(struct bfq_data *bfqd,
+ struct blkcg *blkcg)
{
- struct request_queue *q = bfqd->queue;
- struct bfq_group *bfqg = NULL, *parent;
- struct bfq_entity *entity = NULL;
+ struct bfq_group *bfqg, *parent;
+ struct bfq_entity *entity;
assert_spin_locked(bfqd->queue->queue_lock);
- /* avoid lookup for the common case where there's no blkcg */
- if (blkcg == &blkcg_root) {
- bfqg = bfqd->root_group;
- } else {
- struct blkcg_gq *blkg;
-
- blkg = blkg_lookup_create(blkcg, q);
- if (!IS_ERR(blkg))
- bfqg = blkg_to_bfqg(blkg);
- else /* fallback to root_group */
- bfqg = bfqd->root_group;
- }
+ bfqg = bfq_lookup_bfqg(bfqd, blkcg);
- BUG_ON(!bfqg);
+ if (unlikely(!bfqg))
+ return NULL;
/*
* Update chain of bfq_groups as we might be handling a leaf group
@@ -537,11 +505,15 @@ static struct bfq_group *bfq_find_alloc_group(struct bfq_data *bfqd,
static void bfq_pos_tree_add_move(struct bfq_data *bfqd,
struct bfq_queue *bfqq);
+static void bfq_bfqq_expire(struct bfq_data *bfqd,
+ struct bfq_queue *bfqq,
+ bool compensate,
+ enum bfqq_expiration reason);
+
/**
* bfq_bfqq_move - migrate @bfqq to @bfqg.
* @bfqd: queue descriptor.
* @bfqq: the queue to move.
- * @entity: @bfqq's entity.
* @bfqg: the group to move to.
*
* Move @bfqq to @bfqg, deactivating it from its old group and reactivating
@@ -552,26 +524,40 @@ static void bfq_pos_tree_add_move(struct bfq_data *bfqd,
* rcu_read_lock()).
*/
static void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
- struct bfq_entity *entity, struct bfq_group *bfqg)
+ struct bfq_group *bfqg)
{
- int busy, resume;
-
- busy = bfq_bfqq_busy(bfqq);
- resume = !RB_EMPTY_ROOT(&bfqq->sort_list);
+ struct bfq_entity *entity = &bfqq->entity;
- BUG_ON(resume && !entity->on_st);
- BUG_ON(busy && !resume && entity->on_st &&
+ BUG_ON(!bfq_bfqq_busy(bfqq) && !RB_EMPTY_ROOT(&bfqq->sort_list));
+ BUG_ON(!RB_EMPTY_ROOT(&bfqq->sort_list) && !entity->on_st);
+ BUG_ON(bfq_bfqq_busy(bfqq) && RB_EMPTY_ROOT(&bfqq->sort_list)
+ && entity->on_st &&
bfqq != bfqd->in_service_queue);
+ BUG_ON(!bfq_bfqq_busy(bfqq) && bfqq == bfqd->in_service_queue);
- if (busy) {
- BUG_ON(atomic_read(&bfqq->ref) < 2);
+ /* If bfqq is empty, then bfq_bfqq_expire also invokes
+ * bfq_del_bfqq_busy, thereby removing bfqq and its entity
+ * from data structures related to current group. Otherwise we
+ * need to remove bfqq explicitly with bfq_deactivate_bfqq, as
+ * we do below.
+ */
+ if (bfqq == bfqd->in_service_queue)
+ bfq_bfqq_expire(bfqd, bfqd->in_service_queue,
+ false, BFQ_BFQQ_PREEMPTED);
+
+ BUG_ON(entity->on_st && !bfq_bfqq_busy(bfqq)
+ && &bfq_entity_service_tree(entity)->idle !=
+ entity->tree);
+
+ BUG_ON(RB_EMPTY_ROOT(&bfqq->sort_list) && bfq_bfqq_busy(bfqq));
- if (!resume)
- bfq_del_bfqq_busy(bfqd, bfqq, 0);
- else
- bfq_deactivate_bfqq(bfqd, bfqq, 0);
- } else if (entity->on_st)
+ if (bfq_bfqq_busy(bfqq))
+ bfq_deactivate_bfqq(bfqd, bfqq, 0);
+ else if (entity->on_st) {
+ BUG_ON(&bfq_entity_service_tree(entity)->idle !=
+ entity->tree);
bfq_put_idle_entity(bfq_entity_service_tree(entity), entity);
+ }
bfqg_put(bfqq_group(bfqq));
/*
@@ -583,14 +569,17 @@ static void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
entity->sched_data = &bfqg->sched_data;
bfqg_get(bfqg);
- if (busy) {
+ BUG_ON(RB_EMPTY_ROOT(&bfqq->sort_list) && bfq_bfqq_busy(bfqq));
+ if (bfq_bfqq_busy(bfqq)) {
bfq_pos_tree_add_move(bfqd, bfqq);
- if (resume)
- bfq_activate_bfqq(bfqd, bfqq);
+ bfq_activate_bfqq(bfqd, bfqq);
}
if (!bfqd->in_service_queue && !bfqd->rq_in_driver)
bfq_schedule_dispatch(bfqd);
+ BUG_ON(entity->on_st && !bfq_bfqq_busy(bfqq)
+ && &bfq_entity_service_tree(entity)->idle !=
+ entity->tree);
}
/**
@@ -617,7 +606,11 @@ static struct bfq_group *__bfq_bic_change_cgroup(struct bfq_data *bfqd,
lockdep_assert_held(bfqd->queue->queue_lock);
- bfqg = bfq_find_alloc_group(bfqd, blkcg);
+ bfqg = bfq_find_set_group(bfqd, blkcg);
+
+ if (unlikely(!bfqg))
+ bfqg = bfqd->root_group;
+
if (async_bfqq) {
entity = &async_bfqq->entity;
@@ -625,7 +618,8 @@ static struct bfq_group *__bfq_bic_change_cgroup(struct bfq_data *bfqd,
bic_set_bfqq(bic, NULL, 0);
bfq_log_bfqq(bfqd, async_bfqq,
"bic_change_group: %p %d",
- async_bfqq, atomic_read(&async_bfqq->ref));
+ async_bfqq,
+ async_bfqq->ref);
bfq_put_queue(async_bfqq);
}
}
@@ -633,7 +627,7 @@ static struct bfq_group *__bfq_bic_change_cgroup(struct bfq_data *bfqd,
if (sync_bfqq) {
entity = &sync_bfqq->entity;
if (entity->sched_data != &bfqg->sched_data)
- bfq_bfqq_move(bfqd, sync_bfqq, entity, bfqg);
+ bfq_bfqq_move(bfqd, sync_bfqq, bfqg);
}
return bfqg;
@@ -642,25 +636,23 @@ static struct bfq_group *__bfq_bic_change_cgroup(struct bfq_data *bfqd,
static void bfq_bic_update_cgroup(struct bfq_io_cq *bic, struct bio *bio)
{
struct bfq_data *bfqd = bic_to_bfqd(bic);
- struct blkcg *blkcg;
struct bfq_group *bfqg = NULL;
- uint64_t id;
+ uint64_t serial_nr;
rcu_read_lock();
- blkcg = bio_blkcg(bio);
- id = blkcg->css.serial_nr;
- rcu_read_unlock();
+ serial_nr = bio_blkcg(bio)->css.serial_nr;
/*
* Check whether blkcg has changed. The condition may trigger
* spuriously on a newly created cic but there's no harm.
*/
- if (unlikely(!bfqd) || likely(bic->blkcg_id == id))
- return;
+ if (unlikely(!bfqd) || likely(bic->blkcg_serial_nr == serial_nr))
+ goto out;
- bfqg = __bfq_bic_change_cgroup(bfqd, bic, blkcg);
- BUG_ON(!bfqg);
- bic->blkcg_id = id;
+ bfqg = __bfq_bic_change_cgroup(bfqd, bic, bio_blkcg(bio));
+ bic->blkcg_serial_nr = serial_nr;
+out:
+ rcu_read_unlock();
}
/**
@@ -686,7 +678,7 @@ static void bfq_reparent_leaf_entity(struct bfq_data *bfqd,
struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
BUG_ON(!bfqq);
- bfq_bfqq_move(bfqd, bfqq, entity, bfqd->root_group);
+ bfq_bfqq_move(bfqd, bfqq, bfqd->root_group);
}
/**
@@ -717,11 +709,12 @@ static void bfq_reparent_active_entities(struct bfq_data *bfqd,
}
/**
- * bfq_destroy_group - destroy @bfqg.
- * @bfqg: the group being destroyed.
+ * bfq_pd_offline - deactivate the entity associated with @pd,
+ * and reparent its children entities.
+ * @pd: descriptor of the policy going offline.
*
- * Destroy @bfqg, making sure that it is not referenced from its parent.
- * blkio already grabs the queue_lock for us, so no need to use RCU-based magic
+ * blkio already grabs the queue_lock for us, so no need to use
+ * RCU-based magic
*/
static void bfq_pd_offline(struct blkg_policy_data *pd)
{
@@ -780,6 +773,12 @@ static void bfq_pd_offline(struct blkg_policy_data *pd)
bfq_put_async_queues(bfqd, bfqg);
BUG_ON(entity->tree);
+ /*
+ * @blkg is going offline and will be ignored by
+ * blkg_[rw]stat_recursive_sum(). Transfer stats to the parent so
+ * that they don't get lost. If IOs complete after this point, the
+ * stats for them will be lost. Oh well...
+ */
bfqg_stats_xfer_dead(bfqg);
}
@@ -789,46 +788,35 @@ static void bfq_end_wr_async(struct bfq_data *bfqd)
list_for_each_entry(blkg, &bfqd->queue->blkg_list, q_node) {
struct bfq_group *bfqg = blkg_to_bfqg(blkg);
+ BUG_ON(!bfqg);
bfq_end_wr_async_queues(bfqd, bfqg);
}
bfq_end_wr_async_queues(bfqd, bfqd->root_group);
}
-static u64 bfqio_cgroup_weight_read(struct cgroup_subsys_state *css,
- struct cftype *cftype)
-{
- struct blkcg *blkcg = css_to_blkcg(css);
- struct bfq_group_data *bfqgd = blkcg_to_bfqgd(blkcg);
- int ret = -EINVAL;
-
- spin_lock_irq(&blkcg->lock);
- ret = bfqgd->weight;
- spin_unlock_irq(&blkcg->lock);
-
- return ret;
-}
-
-static int bfqio_cgroup_weight_read_dfl(struct seq_file *sf, void *v)
+static int bfq_io_show_weight(struct seq_file *sf, void *v)
{
struct blkcg *blkcg = css_to_blkcg(seq_css(sf));
struct bfq_group_data *bfqgd = blkcg_to_bfqgd(blkcg);
+ unsigned int val = 0;
- spin_lock_irq(&blkcg->lock);
- seq_printf(sf, "%u\n", bfqgd->weight);
- spin_unlock_irq(&blkcg->lock);
+ if (bfqgd)
+ val = bfqgd->weight;
+
+ seq_printf(sf, "%u\n", val);
return 0;
}
-static int bfqio_cgroup_weight_write(struct cgroup_subsys_state *css,
- struct cftype *cftype,
- u64 val)
+static int bfq_io_set_weight_legacy(struct cgroup_subsys_state *css,
+ struct cftype *cftype,
+ u64 val)
{
struct blkcg *blkcg = css_to_blkcg(css);
struct bfq_group_data *bfqgd = blkcg_to_bfqgd(blkcg);
struct blkcg_gq *blkg;
- int ret = -EINVAL;
+ int ret = -ERANGE;
if (val < BFQ_MIN_WEIGHT || val > BFQ_MAX_WEIGHT)
return ret;
@@ -873,13 +861,18 @@ static int bfqio_cgroup_weight_write(struct cgroup_subsys_state *css,
return ret;
}
-static ssize_t bfqio_cgroup_weight_write_dfl(struct kernfs_open_file *of,
- char *buf, size_t nbytes,
- loff_t off)
+static ssize_t bfq_io_set_weight(struct kernfs_open_file *of,
+ char *buf, size_t nbytes,
+ loff_t off)
{
+ u64 weight;
/* First unsigned long found in the file is used */
- return bfqio_cgroup_weight_write(of_css(of), NULL,
- simple_strtoull(strim(buf), NULL, 0));
+ int ret = kstrtoull(strim(buf), 0, &weight);
+
+ if (ret)
+ return ret;
+
+ return bfq_io_set_weight_legacy(of_css(of), NULL, weight);
}
static int bfqg_print_stat(struct seq_file *sf, void *v)
@@ -899,16 +892,17 @@ static int bfqg_print_rwstat(struct seq_file *sf, void *v)
static u64 bfqg_prfill_stat_recursive(struct seq_file *sf,
struct blkg_policy_data *pd, int off)
{
- u64 sum = bfqg_stat_pd_recursive_sum(pd, off);
-
+ u64 sum = blkg_stat_recursive_sum(pd_to_blkg(pd),
+ &blkcg_policy_bfq, off);
return __blkg_prfill_u64(sf, pd, sum);
}
static u64 bfqg_prfill_rwstat_recursive(struct seq_file *sf,
struct blkg_policy_data *pd, int off)
{
- struct blkg_rwstat sum = bfqg_rwstat_pd_recursive_sum(pd, off);
-
+ struct blkg_rwstat sum = blkg_rwstat_recursive_sum(pd_to_blkg(pd),
+ &blkcg_policy_bfq,
+ off);
return __blkg_prfill_rwstat(sf, pd, &sum);
}
@@ -928,6 +922,41 @@ static int bfqg_print_rwstat_recursive(struct seq_file *sf, void *v)
return 0;
}
+static u64 bfqg_prfill_sectors(struct seq_file *sf, struct blkg_policy_data *pd,
+ int off)
+{
+ u64 sum = blkg_rwstat_total(&pd->blkg->stat_bytes);
+
+ return __blkg_prfill_u64(sf, pd, sum >> 9);
+}
+
+static int bfqg_print_stat_sectors(struct seq_file *sf, void *v)
+{
+ blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
+ bfqg_prfill_sectors, &blkcg_policy_bfq, 0, false);
+ return 0;
+}
+
+static u64 bfqg_prfill_sectors_recursive(struct seq_file *sf,
+ struct blkg_policy_data *pd, int off)
+{
+ struct blkg_rwstat tmp = blkg_rwstat_recursive_sum(pd->blkg, NULL,
+ offsetof(struct blkcg_gq, stat_bytes));
+ u64 sum = atomic64_read(&tmp.aux_cnt[BLKG_RWSTAT_READ]) +
+ atomic64_read(&tmp.aux_cnt[BLKG_RWSTAT_WRITE]);
+
+ return __blkg_prfill_u64(sf, pd, sum >> 9);
+}
+
+static int bfqg_print_stat_sectors_recursive(struct seq_file *sf, void *v)
+{
+ blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
+ bfqg_prfill_sectors_recursive, &blkcg_policy_bfq, 0,
+ false);
+ return 0;
+}
+
+
static u64 bfqg_prfill_avg_queue_size(struct seq_file *sf,
struct blkg_policy_data *pd, int off)
{
@@ -964,38 +993,15 @@ bfq_create_group_hierarchy(struct bfq_data *bfqd, int node)
return blkg_to_bfqg(bfqd->queue->root_blkg);
}
-static struct blkcg_policy_data *bfq_cpd_alloc(gfp_t gfp)
-{
- struct bfq_group_data *bgd;
-
- bgd = kzalloc(sizeof(*bgd), GFP_KERNEL);
- if (!bgd)
- return NULL;
- return &bgd->pd;
-}
-
-static void bfq_cpd_free(struct blkcg_policy_data *cpd)
-{
- kfree(cpd_to_bfqgd(cpd));
-}
-
-static struct cftype bfqio_files_dfl[] = {
+static struct cftype bfq_blkcg_legacy_files[] = {
{
- .name = "weight",
+ .name = "bfq.weight",
.flags = CFTYPE_NOT_ON_ROOT,
- .seq_show = bfqio_cgroup_weight_read_dfl,
- .write = bfqio_cgroup_weight_write_dfl,
+ .seq_show = bfq_io_show_weight,
+ .write_u64 = bfq_io_set_weight_legacy,
},
- {} /* terminate */
-};
-static struct cftype bfqio_files[] = {
- {
- .name = "bfq.weight",
- .read_u64 = bfqio_cgroup_weight_read,
- .write_u64 = bfqio_cgroup_weight_write,
- },
- /* statistics, cover only the tasks in the bfqg */
+ /* statistics, covers only the tasks in the bfqg */
{
.name = "bfq.time",
.private = offsetof(struct bfq_group, stats.time),
@@ -1003,18 +1009,17 @@ static struct cftype bfqio_files[] = {
},
{
.name = "bfq.sectors",
- .private = offsetof(struct bfq_group, stats.sectors),
- .seq_show = bfqg_print_stat,
+ .seq_show = bfqg_print_stat_sectors,
},
{
.name = "bfq.io_service_bytes",
- .private = offsetof(struct bfq_group, stats.service_bytes),
- .seq_show = bfqg_print_rwstat,
+ .private = (unsigned long)&blkcg_policy_bfq,
+ .seq_show = blkg_print_stat_bytes,
},
{
.name = "bfq.io_serviced",
- .private = offsetof(struct bfq_group, stats.serviced),
- .seq_show = bfqg_print_rwstat,
+ .private = (unsigned long)&blkcg_policy_bfq,
+ .seq_show = blkg_print_stat_ios,
},
{
.name = "bfq.io_service_time",
@@ -1045,18 +1050,17 @@ static struct cftype bfqio_files[] = {
},
{
.name = "bfq.sectors_recursive",
- .private = offsetof(struct bfq_group, stats.sectors),
- .seq_show = bfqg_print_stat_recursive,
+ .seq_show = bfqg_print_stat_sectors_recursive,
},
{
.name = "bfq.io_service_bytes_recursive",
- .private = offsetof(struct bfq_group, stats.service_bytes),
- .seq_show = bfqg_print_rwstat_recursive,
+ .private = (unsigned long)&blkcg_policy_bfq,
+ .seq_show = blkg_print_stat_bytes_recursive,
},
{
.name = "bfq.io_serviced_recursive",
- .private = offsetof(struct bfq_group, stats.serviced),
- .seq_show = bfqg_print_rwstat_recursive,
+ .private = (unsigned long)&blkcg_policy_bfq,
+ .seq_show = blkg_print_stat_ios_recursive,
},
{
.name = "bfq.io_service_time_recursive",
@@ -1102,31 +1106,39 @@ static struct cftype bfqio_files[] = {
.private = offsetof(struct bfq_group, stats.dequeue),
.seq_show = bfqg_print_stat,
},
- {
- .name = "bfq.unaccounted_time",
- .private = offsetof(struct bfq_group, stats.unaccounted_time),
- .seq_show = bfqg_print_stat,
- },
{ } /* terminate */
};
-static struct blkcg_policy blkcg_policy_bfq = {
- .dfl_cftypes = bfqio_files_dfl,
- .legacy_cftypes = bfqio_files,
-
- .pd_alloc_fn = bfq_pd_alloc,
- .pd_init_fn = bfq_pd_init,
- .pd_offline_fn = bfq_pd_offline,
- .pd_free_fn = bfq_pd_free,
- .pd_reset_stats_fn = bfq_pd_reset_stats,
-
- .cpd_alloc_fn = bfq_cpd_alloc,
- .cpd_init_fn = bfq_cpd_init,
- .cpd_bind_fn = bfq_cpd_init,
- .cpd_free_fn = bfq_cpd_free,
+static struct cftype bfq_blkg_files[] = {
+ {
+ .name = "bfq.weight",
+ .flags = CFTYPE_NOT_ON_ROOT,
+ .seq_show = bfq_io_show_weight,
+ .write = bfq_io_set_weight,
+ },
+ {} /* terminate */
};
-#else
+#else /* CONFIG_BFQ_GROUP_IOSCHED */
+
+static inline void bfqg_stats_update_io_add(struct bfq_group *bfqg,
+ struct bfq_queue *bfqq, int op, int op_flags) { }
+static inline void
+bfqg_stats_update_io_remove(struct bfq_group *bfqg, int op, int op_flags) { }
+static inline void
+bfqg_stats_update_io_merged(struct bfq_group *bfqg, int op, int op_flags) { }
+static inline void bfqg_stats_update_completion(struct bfq_group *bfqg,
+ uint64_t start_time, uint64_t io_start_time, int op,
+ int op_flags) { }
+static inline void
+bfqg_stats_set_start_group_wait_time(struct bfq_group *bfqg,
+ struct bfq_group *curr_bfqg) { }
+static inline void bfqg_stats_end_empty_time(struct bfqg_stats *stats) { }
+static inline void bfqg_stats_update_dequeue(struct bfq_group *bfqg) { }
+static inline void bfqg_stats_set_start_empty_time(struct bfq_group *bfqg) { }
+static inline void bfqg_stats_update_idle_time(struct bfq_group *bfqg) { }
+static inline void bfqg_stats_set_start_idle_time(struct bfq_group *bfqg) { }
+static inline void bfqg_stats_update_avg_queue_size(struct bfq_group *bfqg) { }
static void bfq_init_entity(struct bfq_entity *entity,
struct bfq_group *bfqg)
@@ -1150,27 +1162,20 @@ bfq_bic_update_cgroup(struct bfq_io_cq *bic, struct bio *bio)
return bfqd->root_group;
}
-static void bfq_bfqq_move(struct bfq_data *bfqd,
- struct bfq_queue *bfqq,
- struct bfq_entity *entity,
- struct bfq_group *bfqg)
-{
-}
-
static void bfq_end_wr_async(struct bfq_data *bfqd)
{
bfq_end_wr_async_queues(bfqd, bfqd->root_group);
}
-static void bfq_disconnect_groups(struct bfq_data *bfqd)
+static struct bfq_group *bfq_find_set_group(struct bfq_data *bfqd,
+ struct blkcg *blkcg)
{
- bfq_put_async_queues(bfqd, bfqd->root_group);
+ return bfqd->root_group;
}
-static struct bfq_group *bfq_find_alloc_group(struct bfq_data *bfqd,
- struct blkcg *blkcg)
+static struct bfq_group *bfqq_group(struct bfq_queue *bfqq)
{
- return bfqd->root_group;
+ return bfqq->bfqd->root_group;
}
static struct bfq_group *
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index cf3e9b1..eef6ff4 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -7,25 +7,28 @@
* Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
* Paolo Valente <paolo.valente@unimore.it>
*
- * Copyright (C) 2010 Paolo Valente <paolo.valente@unimore.it>
+ * Copyright (C) 2015 Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2016 Paolo Valente <paolo.valente@linaro.org>
*
* Licensed under the GPL-2 as detailed in the accompanying COPYING.BFQ
* file.
*
- * BFQ is a proportional-share storage-I/O scheduling algorithm based on
- * the slice-by-slice service scheme of CFQ. But BFQ assigns budgets,
- * measured in number of sectors, to processes instead of time slices. The
- * device is not granted to the in-service process for a given time slice,
- * but until it has exhausted its assigned budget. This change from the time
- * to the service domain allows BFQ to distribute the device throughput
- * among processes as desired, without any distortion due to ZBR, workload
- * fluctuations or other factors. BFQ uses an ad hoc internal scheduler,
- * called B-WF2Q+, to schedule processes according to their budgets. More
- * precisely, BFQ schedules queues associated to processes. Thanks to the
- * accurate policy of B-WF2Q+, BFQ can afford to assign high budgets to
- * I/O-bound processes issuing sequential requests (to boost the
- * throughput), and yet guarantee a low latency to interactive and soft
- * real-time applications.
+ * BFQ is a proportional-share storage-I/O scheduling algorithm based
+ * on the slice-by-slice service scheme of CFQ. But BFQ assigns
+ * budgets, measured in number of sectors, to processes instead of
+ * time slices. The device is not granted to the in-service process
+ * for a given time slice, but until it has exhausted its assigned
+ * budget. This change from the time to the service domain enables BFQ
+ * to distribute the device throughput among processes as desired,
+ * without any distortion due to throughput fluctuations, or to device
+ * internal queueing. BFQ uses an ad hoc internal scheduler, called
+ * B-WF2Q+, to schedule processes according to their budgets. More
+ * precisely, BFQ schedules queues associated with processes. Thanks to
+ * the accurate policy of B-WF2Q+, BFQ can afford to assign high
+ * budgets to I/O-bound processes issuing sequential requests (to
+ * boost the throughput), and yet guarantee a low latency to
+ * interactive and soft real-time applications.
*
* BFQ is described in [1], where also a reference to the initial, more
* theoretical paper on BFQ can be found. The interested reader can find
@@ -70,8 +73,8 @@
#include "bfq.h"
#include "blk.h"
-/* Expiration time of sync (0) and async (1) requests, in jiffies. */
-static const int bfq_fifo_expire[2] = { HZ / 4, HZ / 8 };
+/* Expiration time of sync (0) and async (1) requests, in ns. */
+static const u64 bfq_fifo_expire[2] = { NSEC_PER_SEC / 4, NSEC_PER_SEC / 8 };
/* Maximum backwards seek, in KiB. */
static const int bfq_back_max = 16 * 1024;
@@ -79,15 +82,14 @@ static const int bfq_back_max = 16 * 1024;
/* Penalty of a backwards seek, in number of sectors. */
static const int bfq_back_penalty = 2;
-/* Idling period duration, in jiffies. */
-static int bfq_slice_idle = HZ / 125;
+/* Idling period duration, in ns. */
+static u32 bfq_slice_idle = NSEC_PER_SEC / 125;
/* Minimum number of assigned budgets for which stats are safe to compute. */
static const int bfq_stats_min_budgets = 194;
/* Default maximum budget values, in sectors and number of requests. */
static const int bfq_default_max_budget = 16 * 1024;
-static const int bfq_max_budget_async_rq = 4;
/*
* Async to sync throughput distribution is controlled as follows:
@@ -97,23 +99,27 @@ static const int bfq_max_budget_async_rq = 4;
static const int bfq_async_charge_factor = 10;
/* Default timeout values, in jiffies, approximating CFQ defaults. */
-static const int bfq_timeout_sync = HZ / 8;
-static int bfq_timeout_async = HZ / 25;
+static const int bfq_timeout = HZ / 8;
struct kmem_cache *bfq_pool;
-/* Below this threshold (in ms), we consider thinktime immediate. */
-#define BFQ_MIN_TT 2
+/* Below this threshold (in ns), we consider thinktime immediate. */
+#define BFQ_MIN_TT (2 * NSEC_PER_MSEC)
/* hw_tag detection: parallel requests threshold and min samples needed. */
#define BFQ_HW_QUEUE_THRESHOLD 4
#define BFQ_HW_QUEUE_SAMPLES 32
-#define BFQQ_SEEK_THR (sector_t)(8 * 1024)
-#define BFQQ_SEEKY(bfqq) ((bfqq)->seek_mean > BFQQ_SEEK_THR)
+#define BFQQ_SEEK_THR (sector_t)(8 * 100)
+#define BFQQ_CLOSE_THR (sector_t)(8 * 1024)
+#define BFQQ_SEEKY(bfqq) (hweight32(bfqq->seek_history) > 32/8)
-/* Min samples used for peak rate estimation (for autotuning). */
-#define BFQ_PEAK_RATE_SAMPLES 32
+/* Min number of samples required to perform peak-rate update */
+#define BFQ_RATE_MIN_SAMPLES 32
+/* Min observation time interval required to perform a peak-rate update (ns) */
+#define BFQ_RATE_MIN_INTERVAL 300*NSEC_PER_MSEC
+/* Target observation time interval for a peak-rate update (ns) */
+#define BFQ_RATE_REF_INTERVAL NSEC_PER_SEC
/* Shift used for peak rate fixed precision calculations. */
#define BFQ_RATE_SHIFT 16
@@ -141,16 +147,24 @@ struct kmem_cache *bfq_pool;
* The device's speed class is dynamically (re)detected in
* bfq_update_peak_rate() every time the estimated peak rate is updated.
*
- * In the following definitions, R_slow[0]/R_fast[0] and T_slow[0]/T_fast[0]
- * are the reference values for a slow/fast rotational device, whereas
- * R_slow[1]/R_fast[1] and T_slow[1]/T_fast[1] are the reference values for
- * a slow/fast non-rotational device. Finally, device_speed_thresh are the
- * thresholds used to switch between speed classes.
+ * In the following definitions, R_slow[0]/R_fast[0] and
+ * T_slow[0]/T_fast[0] are the reference values for a slow/fast
+ * rotational device, whereas R_slow[1]/R_fast[1] and
+ * T_slow[1]/T_fast[1] are the reference values for a slow/fast
+ * non-rotational device. Finally, device_speed_thresh are the
+ * thresholds used to switch between speed classes. The reference
+ * rates are not the actual peak rates of the devices used as a
+ * reference, but slightly lower values. The reason for using these
+ * slightly lower values is that the peak-rate estimator tends to
+ * yield slightly lower values than the actual peak rate (it can yield
+ * the actual peak rate only if there is only one process doing I/O,
+ * and the process does sequential I/O).
+ *
* Both the reference peak rates and the thresholds are measured in
* sectors/usec, left-shifted by BFQ_RATE_SHIFT.
*/
-static int R_slow[2] = {1536, 10752};
-static int R_fast[2] = {17415, 34791};
+static int R_slow[2] = {1000, 10700};
+static int R_fast[2] = {14000, 33000};
/*
* To improve readability, a conversion function is used to initialize the
* following arrays, which entails that they can be initialized only in a
@@ -183,10 +197,7 @@ static void bfq_schedule_dispatch(struct bfq_data *bfqd);
*/
static int bfq_bio_sync(struct bio *bio)
{
- if (bio_data_dir(bio) == READ || (bio->bi_rw & REQ_SYNC))
- return 1;
-
- return 0;
+ return bio_data_dir(bio) == READ || (bio->bi_opf & REQ_SYNC);
}
/*
@@ -409,11 +420,7 @@ static bool bfq_differentiated_weights(struct bfq_data *bfqd)
*/
static bool bfq_symmetric_scenario(struct bfq_data *bfqd)
{
- return
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
- !bfqd->active_numerous_groups &&
-#endif
- !bfq_differentiated_weights(bfqd);
+ return !bfq_differentiated_weights(bfqd);
}
/*
@@ -533,9 +540,19 @@ static struct request *bfq_find_next_rq(struct bfq_data *bfqd,
static unsigned long bfq_serv_to_charge(struct request *rq,
struct bfq_queue *bfqq)
{
- return blk_rq_sectors(rq) *
- (1 + ((!bfq_bfqq_sync(bfqq)) * (bfqq->wr_coeff == 1) *
- bfq_async_charge_factor));
+ if (bfq_bfqq_sync(bfqq) || bfqq->wr_coeff > 1)
+ return blk_rq_sectors(rq);
+
+ /*
+ * If there are no weight-raised queues, then amplify service
+ * by just the async charge factor; otherwise amplify service
+ * by twice the async charge factor, to further reduce latency
+ * for weight-raised queues.
+ */
+ if (bfqq->bfqd->wr_busy_queues == 0)
+ return blk_rq_sectors(rq) * bfq_async_charge_factor;
+
+ return blk_rq_sectors(rq) * 2 * bfq_async_charge_factor;
}
/**
@@ -590,12 +607,23 @@ static unsigned int bfq_wr_duration(struct bfq_data *bfqd)
dur = bfqd->RT_prod;
do_div(dur, bfqd->peak_rate);
- return dur;
-}
+ /*
+ * Limit duration between 3 and 13 seconds. Tests show that
+ * higher values than 13 seconds often yield the opposite of
+ * the desired result, i.e., worsen responsiveness by letting
+ * non-interactive and non-soft-real-time applications
+ * preserve weight raising for a too long time interval.
+ *
+ * On the other end, lower values than 3 seconds make it
+ * difficult for most interactive tasks to complete their jobs
+ * before weight-raising finishes.
+ */
+ if (dur > msecs_to_jiffies(13000))
+ dur = msecs_to_jiffies(13000);
+ else if (dur < msecs_to_jiffies(3000))
+ dur = msecs_to_jiffies(3000);
-static unsigned int bfq_bfqq_cooperations(struct bfq_queue *bfqq)
-{
- return bfqq->bic ? bfqq->bic->cooperations : 0;
+ return dur;
}
static void
@@ -605,31 +633,28 @@ bfq_bfqq_resume_state(struct bfq_queue *bfqq, struct bfq_io_cq *bic)
bfq_mark_bfqq_idle_window(bfqq);
else
bfq_clear_bfqq_idle_window(bfqq);
+
if (bic->saved_IO_bound)
bfq_mark_bfqq_IO_bound(bfqq);
else
bfq_clear_bfqq_IO_bound(bfqq);
- /* Assuming that the flag in_large_burst is already correctly set */
- if (bic->wr_time_left && bfqq->bfqd->low_latency &&
- !bfq_bfqq_in_large_burst(bfqq) &&
- bic->cooperations < bfqq->bfqd->bfq_coop_thresh) {
- /*
- * Start a weight raising period with the duration given by
- * the raising_time_left snapshot.
- */
- if (bfq_bfqq_busy(bfqq))
- bfqq->bfqd->wr_busy_queues++;
- bfqq->wr_coeff = bfqq->bfqd->bfq_wr_coeff;
- bfqq->wr_cur_max_time = bic->wr_time_left;
- bfqq->last_wr_start_finish = jiffies;
- bfqq->entity.prio_changed = 1;
+
+ bfqq->wr_coeff = bic->saved_wr_coeff;
+ bfqq->wr_start_at_switch_to_srt = bic->saved_wr_start_at_switch_to_srt;
+ BUG_ON(time_is_after_jiffies(bfqq->wr_start_at_switch_to_srt));
+ bfqq->last_wr_start_finish = bic->saved_last_wr_start_finish;
+ BUG_ON(time_is_after_jiffies(bfqq->last_wr_start_finish));
+
+ if (bfqq->wr_coeff > 1 && (bfq_bfqq_in_large_burst(bfqq) ||
+ time_is_before_jiffies(bfqq->last_wr_start_finish +
+ bfqq->wr_cur_max_time))) {
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "resume state: switching off wr");
+
+ bfqq->wr_coeff = 1;
}
- /*
- * Clear wr_time_left to prevent bfq_bfqq_save_state() from
- * getting confused about the queue's need of a weight-raising
- * period.
- */
- bic->wr_time_left = 0;
+ /* make sure weight will be updated, however we got here */
+ bfqq->entity.prio_changed = 1;
}
static int bfqq_process_refs(struct bfq_queue *bfqq)
@@ -639,7 +664,7 @@ static int bfqq_process_refs(struct bfq_queue *bfqq)
lockdep_assert_held(bfqq->bfqd->queue->queue_lock);
io_refs = bfqq->allocated[READ] + bfqq->allocated[WRITE];
- process_refs = atomic_read(&bfqq->ref) - io_refs - bfqq->entity.on_st;
+ process_refs = bfqq->ref - io_refs - bfqq->entity.on_st;
BUG_ON(process_refs < 0);
return process_refs;
}
@@ -654,6 +679,7 @@ static void bfq_reset_burst_list(struct bfq_data *bfqd, struct bfq_queue *bfqq)
hlist_del_init(&item->burst_list_node);
hlist_add_head(&bfqq->burst_list_node, &bfqd->burst_list);
bfqd->burst_size = 1;
+ bfqd->burst_parent_entity = bfqq->entity.parent;
}
/* Add bfqq to the list of queues in current burst (see bfq_handle_burst) */
@@ -662,6 +688,10 @@ static void bfq_add_to_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq)
/* Increment burst size to take into account also bfqq */
bfqd->burst_size++;
+ bfq_log_bfqq(bfqd, bfqq, "add_to_burst %d", bfqd->burst_size);
+
+ BUG_ON(bfqd->burst_size > bfqd->bfq_large_burst_thresh);
+
if (bfqd->burst_size == bfqd->bfq_large_burst_thresh) {
struct bfq_queue *pos, *bfqq_item;
struct hlist_node *n;
@@ -671,15 +701,19 @@ static void bfq_add_to_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq)
* other to consider this burst as large.
*/
bfqd->large_burst = true;
+ bfq_log_bfqq(bfqd, bfqq, "add_to_burst: large burst started");
/*
* We can now mark all queues in the burst list as
* belonging to a large burst.
*/
hlist_for_each_entry(bfqq_item, &bfqd->burst_list,
- burst_list_node)
+ burst_list_node) {
bfq_mark_bfqq_in_large_burst(bfqq_item);
+ bfq_log_bfqq(bfqd, bfqq_item, "marked in large burst");
+ }
bfq_mark_bfqq_in_large_burst(bfqq);
+ bfq_log_bfqq(bfqd, bfqq, "marked in large burst");
/*
* From now on, and until the current burst finishes, any
@@ -691,67 +725,79 @@ static void bfq_add_to_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq)
hlist_for_each_entry_safe(pos, n, &bfqd->burst_list,
burst_list_node)
hlist_del_init(&pos->burst_list_node);
- } else /* burst not yet large: add bfqq to the burst list */
+ } else /*
+ * Burst not yet large: add bfqq to the burst list. Do
+ * not increment the ref counter for bfqq, because bfqq
+ * is removed from the burst list before freeing bfqq
+ * in put_queue.
+ */
hlist_add_head(&bfqq->burst_list_node, &bfqd->burst_list);
}
/*
- * If many queues happen to become active shortly after each other, then,
- * to help the processes associated to these queues get their job done as
- * soon as possible, it is usually better to not grant either weight-raising
- * or device idling to these queues. In this comment we describe, firstly,
- * the reasons why this fact holds, and, secondly, the next function, which
- * implements the main steps needed to properly mark these queues so that
- * they can then be treated in a different way.
+ * If many queues belonging to the same group happen to be created
+ * shortly after each other, then the processes associated with these
+ * queues have typically a common goal. In particular, bursts of queue
+ * creations are usually caused by services or applications that spawn
+ * many parallel threads/processes. Examples are systemd during boot,
+ * or git grep. To help these processes get their job done as soon as
+ * possible, it is usually better to not grant either weight-raising
+ * or device idling to their queues.
*
- * As for the terminology, we say that a queue becomes active, i.e.,
- * switches from idle to backlogged, either when it is created (as a
- * consequence of the arrival of an I/O request), or, if already existing,
- * when a new request for the queue arrives while the queue is idle.
- * Bursts of activations, i.e., activations of different queues occurring
- * shortly after each other, are typically caused by services or applications
- * that spawn or reactivate many parallel threads/processes. Examples are
- * systemd during boot or git grep.
+ * In this comment we describe, firstly, the reasons why this fact
+ * holds, and, secondly, the next function, which implements the main
+ * steps needed to properly mark these queues so that they can then be
+ * treated in a different way.
*
- * These services or applications benefit mostly from a high throughput:
- * the quicker the requests of the activated queues are cumulatively served,
- * the sooner the target job of these queues gets completed. As a consequence,
- * weight-raising any of these queues, which also implies idling the device
- * for it, is almost always counterproductive: in most cases it just lowers
- * throughput.
+ * The above services or applications benefit mostly from a high
+ * throughput: the quicker the requests of the activated queues are
+ * cumulatively served, the sooner the target job of these queues gets
+ * completed. As a consequence, weight-raising any of these queues,
+ * which also implies idling the device for it, is almost always
+ * counterproductive. In most cases it just lowers throughput.
*
- * On the other hand, a burst of activations may be also caused by the start
- * of an application that does not consist in a lot of parallel I/O-bound
- * threads. In fact, with a complex application, the burst may be just a
- * consequence of the fact that several processes need to be executed to
- * start-up the application. To start an application as quickly as possible,
- * the best thing to do is to privilege the I/O related to the application
- * with respect to all other I/O. Therefore, the best strategy to start as
- * quickly as possible an application that causes a burst of activations is
- * to weight-raise all the queues activated during the burst. This is the
+ * On the other hand, a burst of queue creations may be caused also by
+ * the start of an application that does not consist of a lot of
+ * parallel I/O-bound threads. In fact, with a complex application,
+ * several short processes may need to be executed to start-up the
+ * application. In this respect, to start an application as quickly as
+ * possible, the best thing to do is in any case to privilege the I/O
+ * related to the application with respect to all other
+ * I/O. Therefore, the best strategy to start as quickly as possible
+ * an application that causes a burst of queue creations is to
+ * weight-raise all the queues created during the burst. This is the
* exact opposite of the best strategy for the other type of bursts.
*
- * In the end, to take the best action for each of the two cases, the two
- * types of bursts need to be distinguished. Fortunately, this seems
- * relatively easy to do, by looking at the sizes of the bursts. In
- * particular, we found a threshold such that bursts with a larger size
- * than that threshold are apparently caused only by services or commands
- * such as systemd or git grep. For brevity, hereafter we call just 'large'
- * these bursts. BFQ *does not* weight-raise queues whose activations occur
- * in a large burst. In addition, for each of these queues BFQ performs or
- * does not perform idling depending on which choice boosts the throughput
- * most. The exact choice depends on the device and request pattern at
+ * In the end, to take the best action for each of the two cases, the
+ * two types of bursts need to be distinguished. Fortunately, this
+ * seems relatively easy, by looking at the sizes of the bursts. In
+ * particular, we found a threshold such that only bursts with a
+ * larger size than that threshold are apparently caused by
+ * services or commands such as systemd or git grep. For brevity,
+ * hereafter we call just 'large' these bursts. BFQ *does not*
+ * weight-raise queues whose creation occurs in a large burst. In
+ * addition, for each of these queues BFQ performs or does not perform
+ * idling depending on which choice boosts the throughput more. The
+ * exact choice depends on the device and request pattern at
* hand.
*
- * Turning back to the next function, it implements all the steps needed
- * to detect the occurrence of a large burst and to properly mark all the
- * queues belonging to it (so that they can then be treated in a different
- * way). This goal is achieved by maintaining a special "burst list" that
- * holds, temporarily, the queues that belong to the burst in progress. The
- * list is then used to mark these queues as belonging to a large burst if
- * the burst does become large. The main steps are the following.
+ * Unfortunately, false positives may occur while an interactive task
+ * is starting (e.g., an application is being started). The
+ * consequence is that the queues associated with the task do not
+ * enjoy weight raising as expected. Fortunately these false positives
+ * are very rare. They typically occur if some service happens to
+ * start doing I/O exactly when the interactive task starts.
*
- * . when the very first queue is activated, the queue is inserted into the
+ * Turning back to the next function, it implements all the steps
+ * needed to detect the occurrence of a large burst and to properly
+ * mark all the queues belonging to it (so that they can then be
+ * treated in a different way). This goal is achieved by maintaining a
+ * "burst list" that holds, temporarily, the queues that belong to the
+ * burst in progress. The list is then used to mark these queues as
+ * belonging to a large burst if the burst does become large. The main
+ * steps are the following.
+ *
+ * . when the very first queue is created, the queue is inserted into the
* list (as it could be the first queue in a possible burst)
*
* . if the current burst has not yet become large, and a queue Q that does
@@ -772,13 +818,13 @@ static void bfq_add_to_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq)
*
* . the device enters a large-burst mode
*
- * . if a queue Q that does not belong to the burst is activated while
+ * . if a queue Q that does not belong to the burst is created while
* the device is in large-burst mode and shortly after the last time
* at which a queue either entered the burst list or was marked as
* belonging to the current large burst, then Q is immediately marked
* as belonging to a large burst.
*
- * . if a queue Q that does not belong to the burst is activated a while
+ * . if a queue Q that does not belong to the burst is created a while
* later, i.e., not shortly after, than the last time at which a queue
* either entered the burst list or was marked as belonging to the
* current large burst, then the current burst is deemed as finished and:
@@ -791,52 +837,44 @@ static void bfq_add_to_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq)
* in a possible new burst (then the burst list contains just Q
* after this step).
*/
-static void bfq_handle_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq,
- bool idle_for_long_time)
+static void bfq_handle_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq)
{
/*
- * If bfqq happened to be activated in a burst, but has been idle
- * for at least as long as an interactive queue, then we assume
- * that, in the overall I/O initiated in the burst, the I/O
- * associated to bfqq is finished. So bfqq does not need to be
- * treated as a queue belonging to a burst anymore. Accordingly,
- * we reset bfqq's in_large_burst flag if set, and remove bfqq
- * from the burst list if it's there. We do not decrement instead
- * burst_size, because the fact that bfqq does not need to belong
- * to the burst list any more does not invalidate the fact that
- * bfqq may have been activated during the current burst.
- */
- if (idle_for_long_time) {
- hlist_del_init(&bfqq->burst_list_node);
- bfq_clear_bfqq_in_large_burst(bfqq);
- }
-
- /*
* If bfqq is already in the burst list or is part of a large
- * burst, then there is nothing else to do.
+ * burst, or finally has just been split, then there is
+ * nothing else to do.
*/
if (!hlist_unhashed(&bfqq->burst_list_node) ||
- bfq_bfqq_in_large_burst(bfqq))
+ bfq_bfqq_in_large_burst(bfqq) ||
+ time_is_after_eq_jiffies(bfqq->split_time +
+ msecs_to_jiffies(10)))
return;
/*
- * If bfqq's activation happens late enough, then the current
- * burst is finished, and related data structures must be reset.
+ * If bfqq's creation happens late enough, or bfqq belongs to
+ * a different group than the burst group, then the current
+ * burst is finished, and related data structures must be
+ * reset.
*
- * In this respect, consider the special case where bfqq is the very
- * first queue being activated. In this case, last_ins_in_burst is
- * not yet significant when we get here. But it is easy to verify
- * that, whether or not the following condition is true, bfqq will
- * end up being inserted into the burst list. In particular the
- * list will happen to contain only bfqq. And this is exactly what
- * has to happen, as bfqq may be the first queue in a possible
+ * In this respect, consider the special case where bfqq is
+ * the very first queue created after BFQ is selected for this
+ * device. In this case, last_ins_in_burst and
+ * burst_parent_entity are not yet significant when we get
+ * here. But it is easy to verify that, whether or not the
+ * following condition is true, bfqq will end up being
+ * inserted into the burst list. In particular the list will
+ * happen to contain only bfqq. And this is exactly what has
+ * to happen, as bfqq may be the first queue of the first
* burst.
*/
if (time_is_before_jiffies(bfqd->last_ins_in_burst +
- bfqd->bfq_burst_interval)) {
+ bfqd->bfq_burst_interval) ||
+ bfqq->entity.parent != bfqd->burst_parent_entity) {
bfqd->large_burst = false;
bfq_reset_burst_list(bfqd, bfqq);
- return;
+ bfq_log_bfqq(bfqd, bfqq,
+ "handle_burst: late activation or different group");
+ goto end;
}
/*
@@ -845,8 +883,9 @@ static void bfq_handle_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq,
* bfqq as belonging to this large burst immediately.
*/
if (bfqd->large_burst) {
+ bfq_log_bfqq(bfqd, bfqq, "handle_burst: marked in burst");
bfq_mark_bfqq_in_large_burst(bfqq);
- return;
+ goto end;
}
/*
@@ -855,25 +894,491 @@ static void bfq_handle_burst(struct bfq_data *bfqd, struct bfq_queue *bfqq,
* queue. Then we add bfqq to the burst.
*/
bfq_add_to_burst(bfqd, bfqq);
+end:
+ /*
+ * At this point, bfqq either has been added to the current
+ * burst or has caused the current burst to terminate and a
+ * possible new burst to start. In particular, in the second
+ * case, bfqq has become the first queue in the possible new
+ * burst. In both cases last_ins_in_burst needs to be moved
+ * forward.
+ */
+ bfqd->last_ins_in_burst = jiffies;
+
+}
+
+static int bfq_bfqq_budget_left(struct bfq_queue *bfqq)
+{
+ struct bfq_entity *entity = &bfqq->entity;
+
+ return entity->budget - entity->service;
+}
+
+/*
+ * If enough samples have been computed, return the current max budget
+ * stored in bfqd, which is dynamically updated according to the
+ * estimated disk peak rate; otherwise return the default max budget
+ */
+static int bfq_max_budget(struct bfq_data *bfqd)
+{
+ if (bfqd->budgets_assigned < bfq_stats_min_budgets)
+ return bfq_default_max_budget;
+ else
+ return bfqd->bfq_max_budget;
+}
+
+/*
+ * Return min budget, which is a fraction of the current or default
+ * max budget (trying with 1/32)
+ */
+static int bfq_min_budget(struct bfq_data *bfqd)
+{
+ if (bfqd->budgets_assigned < bfq_stats_min_budgets)
+ return bfq_default_max_budget / 32;
+ else
+ return bfqd->bfq_max_budget / 32;
+}
+
+static void bfq_bfqq_expire(struct bfq_data *bfqd,
+ struct bfq_queue *bfqq,
+ bool compensate,
+ enum bfqq_expiration reason);
+
+/*
+ * The next function, invoked after the input queue bfqq switches from
+ * idle to busy, updates the budget of bfqq. The function also tells
+ * whether the in-service queue should be expired, by returning
+ * true. The purpose of expiring the in-service queue is to give bfqq
+ * the chance to possibly preempt the in-service queue, and the reason
+ * for preempting the in-service queue is to achieve one of the two
+ * goals below.
+ *
+ * 1. Guarantee to bfqq its reserved bandwidth even if bfqq has
+ * expired because it has remained idle. In particular, bfqq may have
+ * expired for one of the following two reasons:
+ *
+ * - BFQ_BFQQ_NO_MORE_REQUEST bfqq did not enjoy any device idling and
+ * did not make it to issue a new request before its last request
+ * was served;
+ *
+ * - BFQ_BFQQ_TOO_IDLE bfqq did enjoy device idling, but did not issue
+ * a new request before the expiration of the idling-time.
+ *
+ * Even if bfqq has expired for one of the above reasons, the process
+ * associated with the queue may be however issuing requests greedily,
+ * and thus be sensitive to the bandwidth it receives (bfqq may have
+ * remained idle for other reasons: CPU high load, bfqq not enjoying
+ * idling, I/O throttling somewhere in the path from the process to
+ * the I/O scheduler, ...). But if, after every expiration for one of
+ * the above two reasons, bfqq has to wait for the service of at least
+ * one full budget of another queue before being served again, then
+ * bfqq is likely to get a much lower bandwidth or resource time than
+ * its reserved ones. To address this issue, two countermeasures need
+ * to be taken.
+ *
+ * First, the budget and the timestamps of bfqq need to be updated in
+ * a special way on bfqq reactivation: they need to be updated as if
+ * bfqq did not remain idle and did not expire. In fact, if they are
+ * computed as if bfqq expired and remained idle until reactivation,
+ * then the process associated with bfqq is treated as if, instead of
+ * being greedy, it stopped issuing requests when bfqq remained idle,
+ * and restarts issuing requests only on this reactivation. In other
+ * words, the scheduler does not help the process recover the "service
+ * hole" between bfqq expiration and reactivation. As a consequence,
+ * the process receives a lower bandwidth than its reserved one. In
+ * contrast, to recover this hole, the budget must be updated as if
+ * bfqq was not expired at all before this reactivation, i.e., it must
+ * be set to the value of the remaining budget when bfqq was
+ * expired. Along the same line, timestamps need to be assigned the
+ * value they had the last time bfqq was selected for service, i.e.,
+ * before last expiration. Thus timestamps need to be back-shifted
+ * with respect to their normal computation (see [1] for more details
+ * on this tricky aspect).
+ *
+ * Secondly, to allow the process to recover the hole, the in-service
+ * queue must be expired too, to give bfqq the chance to preempt it
+ * immediately. In fact, if bfqq has to wait for a full budget of the
+ * in-service queue to be completed, then it may become impossible to
+ * let the process recover the hole, even if the back-shifted
+ * timestamps of bfqq are lower than those of the in-service queue. If
+ * this happens for most or all of the holes, then the process may not
+ * receive its reserved bandwidth. In this respect, it is worth noting
+ * that, being the service of outstanding requests unpreemptible, a
+ * little fraction of the holes may however be unrecoverable, thereby
+ * causing a little loss of bandwidth.
+ *
+ * The last important point is detecting whether bfqq does need this
+ * bandwidth recovery. In this respect, the next function deems the
+ * process associated with bfqq greedy, and thus allows it to recover
+ * the hole, if: 1) the process is waiting for the arrival of a new
+ * request (which implies that bfqq expired for one of the above two
+ * reasons), and 2) such a request has arrived soon. The first
+ * condition is controlled through the flag non_blocking_wait_rq,
+ * while the second through the flag arrived_in_time. If both
+ * conditions hold, then the function computes the budget in the
+ * above-described special way, and signals that the in-service queue
+ * should be expired. Timestamp back-shifting is done later in
+ * __bfq_activate_entity.
+ *
+ * 2. Reduce latency. Even if timestamps are not backshifted to let
+ * the process associated with bfqq recover a service hole, bfqq may
+ * however happen to have, after being (re)activated, a lower finish
+ * timestamp than the in-service queue. That is, the next budget of
+ * bfqq may have to be completed before the one of the in-service
+ * queue. If this is the case, then preempting the in-service queue
+ * allows this goal to be achieved, apart from the unpreemptible,
+ * outstanding requests mentioned above.
+ *
+ * Unfortunately, regardless of which of the above two goals one wants
+ * to achieve, service trees need first to be updated to know whether
+ * the in-service queue must be preempted. To have service trees
+ * correctly updated, the in-service queue must be expired and
+ * rescheduled, and bfqq must be scheduled too. This is one of the
+ * most costly operations (in future versions, the scheduling
+ * mechanism may be re-designed in such a way to make it possible to
+ * know whether preemption is needed without needing to update service
+ * trees). In addition, queue preemptions almost always cause random
+ * I/O, and thus loss of throughput. Because of these facts, the next
+ * function adopts the following simple scheme to avoid both costly
+ * operations and too frequent preemptions: it requests the expiration
+ * of the in-service queue (unconditionally) only for queues that need
+ * to recover a hole, or that either are weight-raised or deserve to
+ * be weight-raised.
+ */
+static bool bfq_bfqq_update_budg_for_activation(struct bfq_data *bfqd,
+ struct bfq_queue *bfqq,
+ bool arrived_in_time,
+ bool wr_or_deserves_wr)
+{
+ struct bfq_entity *entity = &bfqq->entity;
+
+ if (bfq_bfqq_non_blocking_wait_rq(bfqq) && arrived_in_time) {
+ /*
+ * We do not clear the flag non_blocking_wait_rq here, as
+ * the latter is used in bfq_activate_bfqq to signal
+ * that timestamps need to be back-shifted (and is
+ * cleared right after).
+ */
+
+ /*
+ * In next assignment we rely on that either
+ * entity->service or entity->budget are not updated
+ * on expiration if bfqq is empty (see
+ * __bfq_bfqq_recalc_budget). Thus both quantities
+ * remain unchanged after such an expiration, and the
+ * following statement therefore assigns to
+ * entity->budget the remaining budget on such an
+ * expiration. For clarity, entity->service is not
+ * updated on expiration in any case, and, in normal
+ * operation, is reset only when bfqq is selected for
+ * service (see bfq_get_next_queue).
+ */
+ BUG_ON(bfqq->max_budget < 0);
+ entity->budget = min_t(unsigned long,
+ bfq_bfqq_budget_left(bfqq),
+ bfqq->max_budget);
+
+ BUG_ON(entity->budget < 0);
+ return true;
+ }
+
+ BUG_ON(bfqq->max_budget < 0);
+ entity->budget = max_t(unsigned long, bfqq->max_budget,
+ bfq_serv_to_charge(bfqq->next_rq, bfqq));
+ BUG_ON(entity->budget < 0);
+
+ bfq_clear_bfqq_non_blocking_wait_rq(bfqq);
+ return wr_or_deserves_wr;
+}
+
+static void bfq_update_bfqq_wr_on_rq_arrival(struct bfq_data *bfqd,
+ struct bfq_queue *bfqq,
+ unsigned int old_wr_coeff,
+ bool wr_or_deserves_wr,
+ bool interactive,
+ bool in_burst,
+ bool soft_rt)
+{
+ if (old_wr_coeff == 1 && wr_or_deserves_wr) {
+ /* start a weight-raising period */
+ if (interactive) {
+ bfqq->wr_coeff = bfqd->bfq_wr_coeff;
+ bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
+ } else {
+ bfqq->wr_start_at_switch_to_srt = jiffies;
+ bfqq->wr_coeff = bfqd->bfq_wr_coeff *
+ BFQ_SOFTRT_WEIGHT_FACTOR;
+ bfqq->wr_cur_max_time =
+ bfqd->bfq_wr_rt_max_time;
+ }
+ /*
+ * If needed, further reduce budget to make sure it is
+ * close to bfqq's backlog, so as to reduce the
+ * scheduling-error component due to a too large
+ * budget. Do not care about throughput consequences,
+ * but only about latency. Finally, do not assign a
+ * too small budget either, to avoid increasing
+ * latency by causing too frequent expirations.
+ */
+ bfqq->entity.budget = min_t(unsigned long,
+ bfqq->entity.budget,
+ 2 * bfq_min_budget(bfqd));
+
+ bfq_log_bfqq(bfqd, bfqq,
+ "wrais starting at %lu, rais_max_time %u",
+ jiffies,
+ jiffies_to_msecs(bfqq->wr_cur_max_time));
+ } else if (old_wr_coeff > 1) {
+ if (interactive) { /* update wr coeff and duration */
+ bfqq->wr_coeff = bfqd->bfq_wr_coeff;
+ bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
+ } else if (in_burst) {
+ bfqq->wr_coeff = 1;
+ bfq_log_bfqq(bfqd, bfqq,
+ "wrais ending at %lu, rais_max_time %u",
+ jiffies,
+ jiffies_to_msecs(bfqq->
+ wr_cur_max_time));
+ } else if (soft_rt) {
+ /*
+ * The application is now or still meeting the
+ * requirements for being deemed soft rt. We
+ * can then correctly and safely (re)charge
+ * the weight-raising duration for the
+ * application with the weight-raising
+ * duration for soft rt applications.
+ *
+ * In particular, doing this recharge now, i.e.,
+ * before the weight-raising period for the
+ * application finishes, reduces the probability
+ * of the following negative scenario:
+ * 1) the weight of a soft rt application is
+ * raised at startup (as for any newly
+ * created application),
+ * 2) since the application is not interactive,
+ * at a certain time weight-raising is
+ * stopped for the application,
+ * 3) at that time the application happens to
+ * still have pending requests, and hence
+ * is destined to not have a chance to be
+ * deemed soft rt before these requests are
+ * completed (see the comments to the
+ * function bfq_bfqq_softrt_next_start()
+ * for details on soft rt detection),
+ * 4) these pending requests experience a high
+ * latency because the application is not
+ * weight-raised while they are pending.
+ */
+ if (bfqq->wr_cur_max_time !=
+ bfqd->bfq_wr_rt_max_time) {
+ bfqq->wr_start_at_switch_to_srt =
+ bfqq->last_wr_start_finish;
+ BUG_ON(time_is_after_jiffies(bfqq->last_wr_start_finish));
+
+ bfqq->wr_cur_max_time =
+ bfqd->bfq_wr_rt_max_time;
+ bfqq->wr_coeff = bfqd->bfq_wr_coeff *
+ BFQ_SOFTRT_WEIGHT_FACTOR;
+ bfq_log_bfqq(bfqd, bfqq,
+ "switching to soft_rt wr");
+ } else
+ bfq_log_bfqq(bfqd, bfqq,
+ "moving forward soft_rt wr duration");
+ bfqq->last_wr_start_finish = jiffies;
+ }
+ }
+}
+
+static bool bfq_bfqq_idle_for_long_time(struct bfq_data *bfqd,
+ struct bfq_queue *bfqq)
+{
+ return bfqq->dispatched == 0 &&
+ time_is_before_jiffies(
+ bfqq->budget_timeout +
+ bfqd->bfq_wr_min_idle_time);
+}
+
+static void bfq_bfqq_handle_idle_busy_switch(struct bfq_data *bfqd,
+ struct bfq_queue *bfqq,
+ int old_wr_coeff,
+ struct request *rq,
+ bool *interactive)
+{
+ bool soft_rt, in_burst, wr_or_deserves_wr,
+ bfqq_wants_to_preempt,
+ idle_for_long_time = bfq_bfqq_idle_for_long_time(bfqd, bfqq),
+ /*
+ * See the comments on
+ * bfq_bfqq_update_budg_for_activation for
+ * details on the usage of the next variable.
+ */
+ arrived_in_time = ktime_get_ns() <=
+ RQ_BIC(rq)->ttime.last_end_request +
+ bfqd->bfq_slice_idle * 3;
+
+ bfq_log_bfqq(bfqd, bfqq,
+ "bfq_add_request non-busy: "
+ "jiffies %lu, in_time %d, idle_long %d busyw %d "
+ "wr_coeff %u",
+ jiffies, arrived_in_time,
+ idle_for_long_time,
+ bfq_bfqq_non_blocking_wait_rq(bfqq),
+ old_wr_coeff);
+
+ BUG_ON(bfqq->entity.budget < bfqq->entity.service);
+
+ BUG_ON(bfqq == bfqd->in_service_queue);
+ bfqg_stats_update_io_add(bfqq_group(RQ_BFQQ(rq)), bfqq,
+ req_op(rq), rq->cmd_flags);
+
+ /*
+ * bfqq deserves to be weight-raised if:
+ * - it is sync,
+ * - it does not belong to a large burst,
+ * - it has been idle for enough time or is soft real-time,
+ * - is linked to a bfq_io_cq (it is not shared in any sense)
+ */
+ in_burst = bfq_bfqq_in_large_burst(bfqq);
+ soft_rt = bfqd->bfq_wr_max_softrt_rate > 0 &&
+ !in_burst &&
+ time_is_before_jiffies(bfqq->soft_rt_next_start);
+ *interactive =
+ !in_burst &&
+ idle_for_long_time;
+ wr_or_deserves_wr = bfqd->low_latency &&
+ (bfqq->wr_coeff > 1 ||
+ (bfq_bfqq_sync(bfqq) &&
+ bfqq->bic && (*interactive || soft_rt)));
+
+ bfq_log_bfqq(bfqd, bfqq,
+ "bfq_add_request: "
+ "in_burst %d, "
+ "soft_rt %d (next %lu), inter %d, bic %p",
+ bfq_bfqq_in_large_burst(bfqq), soft_rt,
+ bfqq->soft_rt_next_start,
+ *interactive,
+ bfqq->bic);
+
+ /*
+ * Using the last flag, update budget and check whether bfqq
+ * may want to preempt the in-service queue.
+ */
+ bfqq_wants_to_preempt =
+ bfq_bfqq_update_budg_for_activation(bfqd, bfqq,
+ arrived_in_time,
+ wr_or_deserves_wr);
+
+ /*
+ * If bfqq happened to be activated in a burst, but has been
+ * idle for much more than an interactive queue, then we
+ * assume that, in the overall I/O initiated in the burst, the
+ * I/O associated with bfqq is finished. So bfqq does not need
+ * to be treated as a queue belonging to a burst
+ * anymore. Accordingly, we reset bfqq's in_large_burst flag
+ * if set, and remove bfqq from the burst list if it's
+ * there. We do not decrement burst_size, because the fact
+ * that bfqq does not need to belong to the burst list any
+ * more does not invalidate the fact that bfqq was created in
+ * a burst.
+ */
+ if (likely(!bfq_bfqq_just_created(bfqq)) &&
+ idle_for_long_time &&
+ time_is_before_jiffies(
+ bfqq->budget_timeout +
+ msecs_to_jiffies(10000))) {
+ hlist_del_init(&bfqq->burst_list_node);
+ bfq_clear_bfqq_in_large_burst(bfqq);
+ }
+
+ bfq_clear_bfqq_just_created(bfqq);
+
+ if (!bfq_bfqq_IO_bound(bfqq)) {
+ if (arrived_in_time) {
+ bfqq->requests_within_timer++;
+ if (bfqq->requests_within_timer >=
+ bfqd->bfq_requests_within_timer)
+ bfq_mark_bfqq_IO_bound(bfqq);
+ } else
+ bfqq->requests_within_timer = 0;
+ bfq_log_bfqq(bfqd, bfqq, "requests in time %d",
+ bfqq->requests_within_timer);
+ }
+
+ if (bfqd->low_latency) {
+ if (unlikely(time_is_after_jiffies(bfqq->split_time)))
+ /* wraparound */
+ bfqq->split_time =
+ jiffies - bfqd->bfq_wr_min_idle_time - 1;
+
+ if (time_is_before_jiffies(bfqq->split_time +
+ bfqd->bfq_wr_min_idle_time)) {
+ bfq_update_bfqq_wr_on_rq_arrival(bfqd, bfqq,
+ old_wr_coeff,
+ wr_or_deserves_wr,
+ *interactive,
+ in_burst,
+ soft_rt);
+
+ if (old_wr_coeff != bfqq->wr_coeff)
+ bfqq->entity.prio_changed = 1;
+ }
+ }
+
+ bfqq->last_idle_bklogged = jiffies;
+ bfqq->service_from_backlogged = 0;
+ bfq_clear_bfqq_softrt_update(bfqq);
+
+ bfq_add_bfqq_busy(bfqd, bfqq);
+
+ /*
+ * Expire in-service queue only if preemption may be needed
+ * for guarantees. In this respect, the function
+ * next_queue_may_preempt just checks a simple, necessary
+ * condition, and not a sufficient condition based on
+ * timestamps. In fact, for the latter condition to be
+ * evaluated, timestamps would need first to be updated, and
+ * this operation is quite costly (see the comments on the
+ * function bfq_bfqq_update_budg_for_activation).
+ */
+ if (bfqd->in_service_queue && bfqq_wants_to_preempt &&
+ bfqd->in_service_queue->wr_coeff < bfqq->wr_coeff &&
+ next_queue_may_preempt(bfqd)) {
+ struct bfq_queue *in_serv =
+ bfqd->in_service_queue;
+ BUG_ON(in_serv == bfqq);
+
+ bfq_bfqq_expire(bfqd, bfqd->in_service_queue,
+ false, BFQ_BFQQ_PREEMPTED);
+ BUG_ON(in_serv->entity.budget < 0);
+ }
}
static void bfq_add_request(struct request *rq)
{
struct bfq_queue *bfqq = RQ_BFQQ(rq);
- struct bfq_entity *entity = &bfqq->entity;
struct bfq_data *bfqd = bfqq->bfqd;
struct request *next_rq, *prev;
- unsigned long old_wr_coeff = bfqq->wr_coeff;
+ unsigned int old_wr_coeff = bfqq->wr_coeff;
bool interactive = false;
- bfq_log_bfqq(bfqd, bfqq, "add_request %d", rq_is_sync(rq));
+ bfq_log_bfqq(bfqd, bfqq, "add_request: size %u %s",
+ blk_rq_sectors(rq), rq_is_sync(rq) ? "S" : "A");
+
+ if (bfqq->wr_coeff > 1) /* queue is being weight-raised */
+ bfq_log_bfqq(bfqd, bfqq,
+ "raising period dur %u/%u msec, old coeff %u, w %d(%d)",
+ jiffies_to_msecs(jiffies - bfqq->last_wr_start_finish),
+ jiffies_to_msecs(bfqq->wr_cur_max_time),
+ bfqq->wr_coeff,
+ bfqq->entity.weight, bfqq->entity.orig_weight);
+
bfqq->queued[rq_is_sync(rq)]++;
bfqd->queued++;
elv_rb_add(&bfqq->sort_list, rq);
/*
- * Check if this request is a better next-serve candidate.
+ * Check if this request is a better next-to-serve candidate.
*/
prev = bfqq->next_rq;
next_rq = bfq_choose_req(bfqd, bfqq->next_rq, rq, bfqd->last_position);
@@ -886,160 +1391,10 @@ static void bfq_add_request(struct request *rq)
if (prev != bfqq->next_rq)
bfq_pos_tree_add_move(bfqd, bfqq);
- if (!bfq_bfqq_busy(bfqq)) {
- bool soft_rt, coop_or_in_burst,
- idle_for_long_time = time_is_before_jiffies(
- bfqq->budget_timeout +
- bfqd->bfq_wr_min_idle_time);
-
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
- bfqg_stats_update_io_add(bfqq_group(RQ_BFQQ(rq)), bfqq,
- rq->cmd_flags);
-#endif
- if (bfq_bfqq_sync(bfqq)) {
- bool already_in_burst =
- !hlist_unhashed(&bfqq->burst_list_node) ||
- bfq_bfqq_in_large_burst(bfqq);
- bfq_handle_burst(bfqd, bfqq, idle_for_long_time);
- /*
- * If bfqq was not already in the current burst,
- * then, at this point, bfqq either has been
- * added to the current burst or has caused the
- * current burst to terminate. In particular, in
- * the second case, bfqq has become the first
- * queue in a possible new burst.
- * In both cases last_ins_in_burst needs to be
- * moved forward.
- */
- if (!already_in_burst)
- bfqd->last_ins_in_burst = jiffies;
- }
-
- coop_or_in_burst = bfq_bfqq_in_large_burst(bfqq) ||
- bfq_bfqq_cooperations(bfqq) >= bfqd->bfq_coop_thresh;
- soft_rt = bfqd->bfq_wr_max_softrt_rate > 0 &&
- !coop_or_in_burst &&
- time_is_before_jiffies(bfqq->soft_rt_next_start);
- interactive = !coop_or_in_burst && idle_for_long_time;
- entity->budget = max_t(unsigned long, bfqq->max_budget,
- bfq_serv_to_charge(next_rq, bfqq));
-
- if (!bfq_bfqq_IO_bound(bfqq)) {
- if (time_before(jiffies,
- RQ_BIC(rq)->ttime.last_end_request +
- bfqd->bfq_slice_idle)) {
- bfqq->requests_within_timer++;
- if (bfqq->requests_within_timer >=
- bfqd->bfq_requests_within_timer)
- bfq_mark_bfqq_IO_bound(bfqq);
- } else
- bfqq->requests_within_timer = 0;
- }
-
- if (!bfqd->low_latency)
- goto add_bfqq_busy;
-
- if (bfq_bfqq_just_split(bfqq))
- goto set_prio_changed;
-
- /*
- * If the queue:
- * - is not being boosted,
- * - has been idle for enough time,
- * - is not a sync queue or is linked to a bfq_io_cq (it is
- * shared "for its nature" or it is not shared and its
- * requests have not been redirected to a shared queue)
- * start a weight-raising period.
- */
- if (old_wr_coeff == 1 && (interactive || soft_rt) &&
- (!bfq_bfqq_sync(bfqq) || bfqq->bic)) {
- bfqq->wr_coeff = bfqd->bfq_wr_coeff;
- if (interactive)
- bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
- else
- bfqq->wr_cur_max_time =
- bfqd->bfq_wr_rt_max_time;
- bfq_log_bfqq(bfqd, bfqq,
- "wrais starting at %lu, rais_max_time %u",
- jiffies,
- jiffies_to_msecs(bfqq->wr_cur_max_time));
- } else if (old_wr_coeff > 1) {
- if (interactive)
- bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
- else if (coop_or_in_burst ||
- (bfqq->wr_cur_max_time ==
- bfqd->bfq_wr_rt_max_time &&
- !soft_rt)) {
- bfqq->wr_coeff = 1;
- bfq_log_bfqq(bfqd, bfqq,
- "wrais ending at %lu, rais_max_time %u",
- jiffies,
- jiffies_to_msecs(bfqq->
- wr_cur_max_time));
- } else if (time_before(
- bfqq->last_wr_start_finish +
- bfqq->wr_cur_max_time,
- jiffies +
- bfqd->bfq_wr_rt_max_time) &&
- soft_rt) {
- /*
- *
- * The remaining weight-raising time is lower
- * than bfqd->bfq_wr_rt_max_time, which means
- * that the application is enjoying weight
- * raising either because deemed soft-rt in
- * the near past, or because deemed interactive
- * a long ago.
- * In both cases, resetting now the current
- * remaining weight-raising time for the
- * application to the weight-raising duration
- * for soft rt applications would not cause any
- * latency increase for the application (as the
- * new duration would be higher than the
- * remaining time).
- *
- * In addition, the application is now meeting
- * the requirements for being deemed soft rt.
- * In the end we can correctly and safely
- * (re)charge the weight-raising duration for
- * the application with the weight-raising
- * duration for soft rt applications.
- *
- * In particular, doing this recharge now, i.e.,
- * before the weight-raising period for the
- * application finishes, reduces the probability
- * of the following negative scenario:
- * 1) the weight of a soft rt application is
- * raised at startup (as for any newly
- * created application),
- * 2) since the application is not interactive,
- * at a certain time weight-raising is
- * stopped for the application,
- * 3) at that time the application happens to
- * still have pending requests, and hence
- * is destined to not have a chance to be
- * deemed soft rt before these requests are
- * completed (see the comments to the
- * function bfq_bfqq_softrt_next_start()
- * for details on soft rt detection),
- * 4) these pending requests experience a high
- * latency because the application is not
- * weight-raised while they are pending.
- */
- bfqq->last_wr_start_finish = jiffies;
- bfqq->wr_cur_max_time =
- bfqd->bfq_wr_rt_max_time;
- }
- }
-set_prio_changed:
- if (old_wr_coeff != bfqq->wr_coeff)
- entity->prio_changed = 1;
-add_bfqq_busy:
- bfqq->last_idle_bklogged = jiffies;
- bfqq->service_from_backlogged = 0;
- bfq_clear_bfqq_softrt_update(bfqq);
- bfq_add_bfqq_busy(bfqd, bfqq);
- } else {
+ if (!bfq_bfqq_busy(bfqq)) /* switching to busy ... */
+ bfq_bfqq_handle_idle_busy_switch(bfqd, bfqq, old_wr_coeff,
+ rq, &interactive);
+ else {
if (bfqd->low_latency && old_wr_coeff == 1 && !rq_is_sync(rq) &&
time_is_before_jiffies(
bfqq->last_wr_start_finish +
@@ -1048,16 +1403,43 @@ add_bfqq_busy:
bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
bfqd->wr_busy_queues++;
- entity->prio_changed = 1;
+ bfqq->entity.prio_changed = 1;
bfq_log_bfqq(bfqd, bfqq,
- "non-idle wrais starting at %lu, rais_max_time %u",
- jiffies,
- jiffies_to_msecs(bfqq->wr_cur_max_time));
+ "non-idle wrais starting, "
+ "wr_max_time %u wr_busy %d",
+ jiffies_to_msecs(bfqq->wr_cur_max_time),
+ bfqd->wr_busy_queues);
}
if (prev != bfqq->next_rq)
bfq_updated_next_req(bfqd, bfqq);
}
+ /*
+ * Assign jiffies to last_wr_start_finish in the following
+ * cases:
+ *
+ * . if bfqq is not going to be weight-raised, because, for
+ * non weight-raised queues, last_wr_start_finish stores the
+ * arrival time of the last request; as of now, this piece
+ * of information is used only for deciding whether to
+ * weight-raise async queues
+ *
+ * . if bfqq is not weight-raised, because, if bfqq is now
+ * switching to weight-raised, then last_wr_start_finish
+ * stores the time when weight-raising starts
+ *
+ * . if bfqq is interactive, because, regardless of whether
+ * bfqq is currently weight-raised, the weight-raising
+ * period must start or restart (this case is considered
+ * separately because it is not detected by the above
+ * conditions, if bfqq is already weight-raised)
+ *
+ * last_wr_start_finish has to be updated also if bfqq is soft
+ * real-time, because the weight-raising period is constantly
+ * restarted on idle-to-busy transitions for these queues, but
+ * this is already done in bfq_bfqq_handle_idle_busy_switch if
+ * needed.
+ */
if (bfqd->low_latency &&
(old_wr_coeff == 1 || bfqq->wr_coeff == 1 || interactive))
bfqq->last_wr_start_finish = jiffies;
@@ -1081,14 +1463,24 @@ static struct request *bfq_find_rq_fmerge(struct bfq_data *bfqd,
return NULL;
}
+static sector_t get_sdist(sector_t last_pos, struct request *rq)
+{
+ sector_t sdist = 0;
+
+ if (last_pos) {
+ if (last_pos < blk_rq_pos(rq))
+ sdist = blk_rq_pos(rq) - last_pos;
+ else
+ sdist = last_pos - blk_rq_pos(rq);
+ }
+
+ return sdist;
+}
+
static void bfq_activate_request(struct request_queue *q, struct request *rq)
{
struct bfq_data *bfqd = q->elevator->elevator_data;
-
bfqd->rq_in_driver++;
- bfqd->last_position = blk_rq_pos(rq) + blk_rq_sectors(rq);
- bfq_log(bfqd, "activate_request: new bfqd->last_position %llu",
- (unsigned long long) bfqd->last_position);
}
static void bfq_deactivate_request(struct request_queue *q, struct request *rq)
@@ -1105,6 +1497,9 @@ static void bfq_remove_request(struct request *rq)
struct bfq_data *bfqd = bfqq->bfqd;
const int sync = rq_is_sync(rq);
+ BUG_ON(bfqq->entity.service > bfqq->entity.budget &&
+ bfqq == bfqd->in_service_queue);
+
if (bfqq->next_rq == rq) {
bfqq->next_rq = bfq_find_next_rq(bfqd, bfqq, rq);
bfq_updated_next_req(bfqd, bfqq);
@@ -1118,8 +1513,25 @@ static void bfq_remove_request(struct request *rq)
elv_rb_del(&bfqq->sort_list, rq);
if (RB_EMPTY_ROOT(&bfqq->sort_list)) {
- if (bfq_bfqq_busy(bfqq) && bfqq != bfqd->in_service_queue)
+ BUG_ON(bfqq->entity.budget < 0);
+
+ if (bfq_bfqq_busy(bfqq) && bfqq != bfqd->in_service_queue) {
bfq_del_bfqq_busy(bfqd, bfqq, 1);
+
+ /* bfqq emptied. In normal operation, when
+ * bfqq is empty, bfqq->entity.service and
+ * bfqq->entity.budget must contain,
+ * respectively, the service received and the
+ * budget used last time bfqq emptied. These
+ * facts do not hold in this case, as at least
+ * this last removal occurred while bfqq is
+ * not in service. To avoid inconsistencies,
+ * reset both bfqq->entity.service and
+ * bfqq->entity.budget.
+ */
+ bfqq->entity.budget = bfqq->entity.service = 0;
+ }
+
/*
* Remove queue from request-position tree as it is empty.
*/
@@ -1133,9 +1545,8 @@ static void bfq_remove_request(struct request *rq)
BUG_ON(bfqq->meta_pending == 0);
bfqq->meta_pending--;
}
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
- bfqg_stats_update_io_remove(bfqq_group(bfqq), rq->cmd_flags);
-#endif
+ bfqg_stats_update_io_remove(bfqq_group(bfqq), req_op(rq),
+ rq->cmd_flags);
}
static int bfq_merge(struct request_queue *q, struct request **req,
@@ -1145,7 +1556,7 @@ static int bfq_merge(struct request_queue *q, struct request **req,
struct request *__rq;
__rq = bfq_find_rq_fmerge(bfqd, bio);
- if (__rq && elv_rq_merge_ok(__rq, bio)) {
+ if (__rq && elv_bio_merge_ok(__rq, bio)) {
*req = __rq;
return ELEVATOR_FRONT_MERGE;
}
@@ -1190,7 +1601,8 @@ static void bfq_merged_request(struct request_queue *q, struct request *req,
static void bfq_bio_merged(struct request_queue *q, struct request *req,
struct bio *bio)
{
- bfqg_stats_update_io_merged(bfqq_group(RQ_BFQQ(req)), bio->bi_rw);
+ bfqg_stats_update_io_merged(bfqq_group(RQ_BFQQ(req)), bio_op(bio),
+ bio->bi_opf);
}
#endif
@@ -1210,7 +1622,7 @@ static void bfq_merged_requests(struct request_queue *q, struct request *rq,
*/
if (bfqq == next_bfqq &&
!list_empty(&rq->queuelist) && !list_empty(&next->queuelist) &&
- time_before(next->fifo_time, rq->fifo_time)) {
+ next->fifo_time < rq->fifo_time) {
list_del_init(&rq->queuelist);
list_replace_init(&next->queuelist, &rq->queuelist);
rq->fifo_time = next->fifo_time;
@@ -1220,21 +1632,31 @@ static void bfq_merged_requests(struct request_queue *q, struct request *rq,
bfqq->next_rq = rq;
bfq_remove_request(next);
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
- bfqg_stats_update_io_merged(bfqq_group(bfqq), next->cmd_flags);
-#endif
+ bfqg_stats_update_io_merged(bfqq_group(bfqq), req_op(next),
+ next->cmd_flags);
}
/* Must be called with bfqq != NULL */
static void bfq_bfqq_end_wr(struct bfq_queue *bfqq)
{
BUG_ON(!bfqq);
+
if (bfq_bfqq_busy(bfqq))
bfqq->bfqd->wr_busy_queues--;
bfqq->wr_coeff = 1;
bfqq->wr_cur_max_time = 0;
- /* Trigger a weight change on the next activation of the queue */
+ bfqq->last_wr_start_finish = jiffies;
+ /*
+ * Trigger a weight change on the next invocation of
+ * __bfq_entity_update_weight_prio.
+ */
bfqq->entity.prio_changed = 1;
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "end_wr: wrais ending at %lu, rais_max_time %u",
+ bfqq->last_wr_start_finish,
+ jiffies_to_msecs(bfqq->wr_cur_max_time));
+ bfq_log_bfqq(bfqq->bfqd, bfqq, "end_wr: wr_busy %d",
+ bfqq->bfqd->wr_busy_queues);
}
static void bfq_end_wr_async_queues(struct bfq_data *bfqd,
@@ -1277,7 +1699,7 @@ static int bfq_rq_close_to_sector(void *io_struct, bool request,
sector_t sector)
{
return abs(bfq_io_struct_pos(io_struct, request) - sector) <=
- BFQQ_SEEK_THR;
+ BFQQ_CLOSE_THR;
}
static struct bfq_queue *bfqq_find_close(struct bfq_data *bfqd,
@@ -1399,7 +1821,7 @@ bfq_setup_merge(struct bfq_queue *bfqq, struct bfq_queue *new_bfqq)
* throughput.
*/
bfqq->new_bfqq = new_bfqq;
- atomic_add(process_refs, &new_bfqq->ref);
+ new_bfqq->ref += process_refs;
return new_bfqq;
}
@@ -1430,9 +1852,23 @@ static bool bfq_may_be_close_cooperator(struct bfq_queue *bfqq,
}
/*
- * Attempt to schedule a merge of bfqq with the currently in-service queue
- * or with a close queue among the scheduled queues.
- * Return NULL if no merge was scheduled, a pointer to the shared bfq_queue
+ * If this function returns true, then bfqq cannot be merged. The idea
+ * is that true cooperation happens very early after processes start
+ * to do I/O. Usually, late cooperations are just accidental false
+ * positives. In case bfqq is weight-raised, such false positives
+ * would evidently degrade latency guarantees for bfqq.
+ */
+bool wr_from_too_long(struct bfq_queue *bfqq)
+{
+ return bfqq->wr_coeff > 1 &&
+ time_is_before_jiffies(bfqq->last_wr_start_finish +
+ msecs_to_jiffies(100));
+}
+
+/*
+ * Attempt to schedule a merge of bfqq with the currently in-service
+ * queue or with a close queue among the scheduled queues. Return
+ * NULL if no merge was scheduled, a pointer to the shared bfq_queue
* structure otherwise.
*
* The OOM queue is not allowed to participate to cooperation: in fact, since
@@ -1441,6 +1877,18 @@ static bool bfq_may_be_close_cooperator(struct bfq_queue *bfqq,
* handle merging with the OOM queue would be quite complex and expensive
* to maintain. Besides, in such a critical condition as an out of memory,
* the benefits of queue merging may be little relevant, or even negligible.
+ *
+ * Weight-raised queues can be merged only if their weight-raising
+ * period has just started. In fact cooperating processes are usually
+ * started together. Thus, with this filter we avoid false positives
+ * that would jeopardize low-latency guarantees.
+ *
+ * WARNING: queue merging may impair fairness among non-weight raised
+ * queues, for at least two reasons: 1) the original weight of a
+ * merged queue may change during the merged state, 2) even being the
+ * weight the same, a merged queue may be bloated with many more
+ * requests than the ones produced by its originally-associated
+ * process.
*/
static struct bfq_queue *
bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
@@ -1450,16 +1898,32 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
if (bfqq->new_bfqq)
return bfqq->new_bfqq;
- if (!io_struct || unlikely(bfqq == &bfqd->oom_bfqq))
+
+ if (io_struct && wr_from_too_long(bfqq) &&
+ likely(bfqq != &bfqd->oom_bfqq))
+ bfq_log_bfqq(bfqd, bfqq,
+ "would have looked for coop, but bfq%d wr",
+ bfqq->pid);
+
+ if (!io_struct ||
+ wr_from_too_long(bfqq) ||
+ unlikely(bfqq == &bfqd->oom_bfqq))
return NULL;
- /* If device has only one backlogged bfq_queue, don't search. */
+
+ /* If there is only one backlogged queue, don't search. */
if (bfqd->busy_queues == 1)
return NULL;
in_service_bfqq = bfqd->in_service_queue;
+ if (in_service_bfqq && in_service_bfqq != bfqq &&
+ bfqd->in_service_bic && wr_from_too_long(in_service_bfqq)
+ && likely(in_service_bfqq == &bfqd->oom_bfqq))
+ bfq_log_bfqq(bfqd, bfqq,
+ "would have tried merge with in-service-queue, but wr");
+
if (!in_service_bfqq || in_service_bfqq == bfqq ||
- !bfqd->in_service_bic ||
+ !bfqd->in_service_bic || wr_from_too_long(in_service_bfqq) ||
unlikely(in_service_bfqq == &bfqd->oom_bfqq))
goto check_scheduled;
@@ -1481,7 +1945,15 @@ check_scheduled:
BUG_ON(new_bfqq && bfqq->entity.parent != new_bfqq->entity.parent);
- if (new_bfqq && likely(new_bfqq != &bfqd->oom_bfqq) &&
+ if (new_bfqq && wr_from_too_long(new_bfqq) &&
+ likely(new_bfqq != &bfqd->oom_bfqq) &&
+ bfq_may_be_close_cooperator(bfqq, new_bfqq))
+ bfq_log_bfqq(bfqd, bfqq,
+ "would have merged with bfq%d, but wr",
+ new_bfqq->pid);
+
+ if (new_bfqq && !wr_from_too_long(new_bfqq) &&
+ likely(new_bfqq != &bfqd->oom_bfqq) &&
bfq_may_be_close_cooperator(bfqq, new_bfqq))
return bfq_setup_merge(bfqq, new_bfqq);
@@ -1490,53 +1962,24 @@ check_scheduled:
static void bfq_bfqq_save_state(struct bfq_queue *bfqq)
{
+ struct bfq_io_cq *bic = bfqq->bic;
+
/*
* If !bfqq->bic, the queue is already shared or its requests
* have already been redirected to a shared queue; both idle window
* and weight raising state have already been saved. Do nothing.
*/
- if (!bfqq->bic)
+ if (!bic)
return;
- if (bfqq->bic->wr_time_left)
- /*
- * This is the queue of a just-started process, and would
- * deserve weight raising: we set wr_time_left to the full
- * weight-raising duration to trigger weight-raising when
- * and if the queue is split and the first request of the
- * queue is enqueued.
- */
- bfqq->bic->wr_time_left = bfq_wr_duration(bfqq->bfqd);
- else if (bfqq->wr_coeff > 1) {
- unsigned long wr_duration =
- jiffies - bfqq->last_wr_start_finish;
- /*
- * It may happen that a queue's weight raising period lasts
- * longer than its wr_cur_max_time, as weight raising is
- * handled only when a request is enqueued or dispatched (it
- * does not use any timer). If the weight raising period is
- * about to end, don't save it.
- */
- if (bfqq->wr_cur_max_time <= wr_duration)
- bfqq->bic->wr_time_left = 0;
- else
- bfqq->bic->wr_time_left =
- bfqq->wr_cur_max_time - wr_duration;
- /*
- * The bfq_queue is becoming shared or the requests of the
- * process owning the queue are being redirected to a shared
- * queue. Stop the weight raising period of the queue, as in
- * both cases it should not be owned by an interactive or
- * soft real-time application.
- */
- bfq_bfqq_end_wr(bfqq);
- } else
- bfqq->bic->wr_time_left = 0;
- bfqq->bic->saved_idle_window = bfq_bfqq_idle_window(bfqq);
- bfqq->bic->saved_IO_bound = bfq_bfqq_IO_bound(bfqq);
- bfqq->bic->saved_in_large_burst = bfq_bfqq_in_large_burst(bfqq);
- bfqq->bic->was_in_burst_list = !hlist_unhashed(&bfqq->burst_list_node);
- bfqq->bic->cooperations++;
- bfqq->bic->failed_cooperations = 0;
+
+ bic->saved_idle_window = bfq_bfqq_idle_window(bfqq);
+ bic->saved_IO_bound = bfq_bfqq_IO_bound(bfqq);
+ bic->saved_in_large_burst = bfq_bfqq_in_large_burst(bfqq);
+ bic->was_in_burst_list = !hlist_unhashed(&bfqq->burst_list_node);
+ bic->saved_wr_coeff = bfqq->wr_coeff;
+ bic->saved_wr_start_at_switch_to_srt = bfqq->wr_start_at_switch_to_srt;
+ bic->saved_last_wr_start_finish = bfqq->last_wr_start_finish;
+ BUG_ON(time_is_after_jiffies(bfqq->last_wr_start_finish));
}
static void bfq_get_bic_reference(struct bfq_queue *bfqq)
@@ -1561,6 +2004,40 @@ bfq_merge_bfqqs(struct bfq_data *bfqd, struct bfq_io_cq *bic,
if (bfq_bfqq_IO_bound(bfqq))
bfq_mark_bfqq_IO_bound(new_bfqq);
bfq_clear_bfqq_IO_bound(bfqq);
+
+ /*
+ * If bfqq is weight-raised, then let new_bfqq inherit
+ * weight-raising. To reduce false positives, neglect the case
+ * where bfqq has just been created, but has not yet made it
+ * to be weight-raised (which may happen because EQM may merge
+ * bfqq even before bfq_add_request is executed for the first
+ * time for bfqq). Handling this case would however be very
+ * easy, thanks to the flag just_created.
+ */
+ if (new_bfqq->wr_coeff == 1 && bfqq->wr_coeff > 1) {
+ new_bfqq->wr_coeff = bfqq->wr_coeff;
+ new_bfqq->wr_cur_max_time = bfqq->wr_cur_max_time;
+ new_bfqq->last_wr_start_finish = bfqq->last_wr_start_finish;
+ new_bfqq->wr_start_at_switch_to_srt = bfqq->wr_start_at_switch_to_srt;
+ if (bfq_bfqq_busy(new_bfqq))
+ bfqd->wr_busy_queues++;
+ new_bfqq->entity.prio_changed = 1;
+ bfq_log_bfqq(bfqd, new_bfqq,
+ "wr start after merge with %d, rais_max_time %u",
+ bfqq->pid,
+ jiffies_to_msecs(bfqq->wr_cur_max_time));
+ }
+
+ if (bfqq->wr_coeff > 1) { /* bfqq has given its wr to new_bfqq */
+ bfqq->wr_coeff = 1;
+ bfqq->entity.prio_changed = 1;
+ if (bfq_bfqq_busy(bfqq))
+ bfqd->wr_busy_queues--;
+ }
+
+ bfq_log_bfqq(bfqd, new_bfqq, "merge_bfqqs: wr_busy %d",
+ bfqd->wr_busy_queues);
+
/*
* Grab a reference to the bic, to prevent it from being destroyed
* before being possibly touched by a bfq_split_bfqq().
@@ -1587,20 +2064,8 @@ bfq_merge_bfqqs(struct bfq_data *bfqd, struct bfq_io_cq *bic,
bfq_put_queue(bfqq);
}
-static void bfq_bfqq_increase_failed_cooperations(struct bfq_queue *bfqq)
-{
- struct bfq_io_cq *bic = bfqq->bic;
- struct bfq_data *bfqd = bfqq->bfqd;
-
- if (bic && bfq_bfqq_cooperations(bfqq) >= bfqd->bfq_coop_thresh) {
- bic->failed_cooperations++;
- if (bic->failed_cooperations >= bfqd->bfq_failed_cooperations)
- bic->cooperations = 0;
- }
-}
-
-static int bfq_allow_merge(struct request_queue *q, struct request *rq,
- struct bio *bio)
+static int bfq_allow_bio_merge(struct request_queue *q, struct request *rq,
+ struct bio *bio)
{
struct bfq_data *bfqd = q->elevator->elevator_data;
struct bfq_io_cq *bic;
@@ -1610,7 +2075,7 @@ static int bfq_allow_merge(struct request_queue *q, struct request *rq,
* Disallow merge of a sync bio into an async request.
*/
if (bfq_bio_sync(bio) && !rq_is_sync(rq))
- return 0;
+ return false;
/*
* Lookup the bfqq that this bio will be queued with. Allow
@@ -1619,7 +2084,7 @@ static int bfq_allow_merge(struct request_queue *q, struct request *rq,
*/
bic = bfq_bic_lookup(bfqd, current->io_context);
if (!bic)
- return 0;
+ return false;
bfqq = bic_to_bfqq(bic, bfq_bio_sync(bio));
/*
@@ -1636,30 +2101,107 @@ static int bfq_allow_merge(struct request_queue *q, struct request *rq,
* to decide whether bio and rq can be merged.
*/
bfqq = new_bfqq;
- } else
- bfq_bfqq_increase_failed_cooperations(bfqq);
+ }
}
return bfqq == RQ_BFQQ(rq);
}
+static int bfq_allow_rq_merge(struct request_queue *q, struct request *rq,
+ struct request *next)
+{
+ return RQ_BFQQ(rq) == RQ_BFQQ(next);
+}
+
+/*
+ * Set the maximum time for the in-service queue to consume its
+ * budget. This prevents seeky processes from lowering the throughput.
+ * In practice, a time-slice service scheme is used with seeky
+ * processes.
+ */
+static void bfq_set_budget_timeout(struct bfq_data *bfqd,
+ struct bfq_queue *bfqq)
+{
+ unsigned int timeout_coeff;
+
+ if (bfqq->wr_cur_max_time == bfqd->bfq_wr_rt_max_time)
+ timeout_coeff = 1;
+ else
+ timeout_coeff = bfqq->entity.weight / bfqq->entity.orig_weight;
+
+ bfqd->last_budget_start = ktime_get();
+
+ bfqq->budget_timeout = jiffies +
+ bfqd->bfq_timeout * timeout_coeff;
+
+ bfq_log_bfqq(bfqd, bfqq, "set budget_timeout %u",
+ jiffies_to_msecs(bfqd->bfq_timeout * timeout_coeff));
+}
+
static void __bfq_set_in_service_queue(struct bfq_data *bfqd,
struct bfq_queue *bfqq)
{
if (bfqq) {
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
bfqg_stats_update_avg_queue_size(bfqq_group(bfqq));
-#endif
bfq_mark_bfqq_must_alloc(bfqq);
- bfq_mark_bfqq_budget_new(bfqq);
bfq_clear_bfqq_fifo_expire(bfqq);
bfqd->budgets_assigned = (bfqd->budgets_assigned*7 + 256) / 8;
+ BUG_ON(bfqq == bfqd->in_service_queue);
+ BUG_ON(RB_EMPTY_ROOT(&bfqq->sort_list));
+
+ if (time_is_before_jiffies(bfqq->last_wr_start_finish) &&
+ bfqq->wr_coeff > 1 &&
+ bfqq->wr_cur_max_time == bfqd->bfq_wr_rt_max_time &&
+ time_is_before_jiffies(bfqq->budget_timeout)) {
+ /*
+ * For soft real-time queues, move the start
+ * of the weight-raising period forward by the
+ * time the queue has not received any
+ * service. Otherwise, a relatively long
+ * service delay is likely to cause the
+ * weight-raising period of the queue to end,
+ * because of the short duration of the
+ * weight-raising period of a soft real-time
+ * queue. It is worth noting that this move
+ * is not so dangerous for the other queues,
+ * because soft real-time queues are not
+ * greedy.
+ *
+ * To not add a further variable, we use the
+ * overloaded field budget_timeout to
+ * determine for how long the queue has not
+ * received service, i.e., how much time has
+ * elapsed since the queue expired. However,
+ * this is a little imprecise, because
+ * budget_timeout is set to jiffies if bfqq
+ * not only expires, but also remains with no
+ * request.
+ */
+ bfqq->last_wr_start_finish += jiffies -
+ max_t(unsigned long, bfqq->last_wr_start_finish,
+ bfqq->budget_timeout);
+ if (time_is_after_jiffies(bfqq->last_wr_start_finish)) {
+ pr_crit(
+ "BFQ WARNING:last %lu budget %lu jiffies %lu",
+ bfqq->last_wr_start_finish,
+ bfqq->budget_timeout,
+ jiffies);
+ pr_crit("diff %lu", jiffies -
+ max_t(unsigned long,
+ bfqq->last_wr_start_finish,
+ bfqq->budget_timeout));
+ bfqq->last_wr_start_finish = jiffies;
+ }
+ }
+
+ bfq_set_budget_timeout(bfqd, bfqq);
bfq_log_bfqq(bfqd, bfqq,
"set_in_service_queue, cur-budget = %d",
bfqq->entity.budget);
- }
+ } else
+ bfq_log(bfqd, "set_in_service_queue: NULL");
bfqd->in_service_queue = bfqq;
}
@@ -1675,36 +2217,11 @@ static struct bfq_queue *bfq_set_in_service_queue(struct bfq_data *bfqd)
return bfqq;
}
-/*
- * If enough samples have been computed, return the current max budget
- * stored in bfqd, which is dynamically updated according to the
- * estimated disk peak rate; otherwise return the default max budget
- */
-static int bfq_max_budget(struct bfq_data *bfqd)
-{
- if (bfqd->budgets_assigned < bfq_stats_min_budgets)
- return bfq_default_max_budget;
- else
- return bfqd->bfq_max_budget;
-}
-
-/*
- * Return min budget, which is a fraction of the current or default
- * max budget (trying with 1/32)
- */
-static int bfq_min_budget(struct bfq_data *bfqd)
-{
- if (bfqd->budgets_assigned < bfq_stats_min_budgets)
- return bfq_default_max_budget / 32;
- else
- return bfqd->bfq_max_budget / 32;
-}
-
static void bfq_arm_slice_timer(struct bfq_data *bfqd)
{
struct bfq_queue *bfqq = bfqd->in_service_queue;
struct bfq_io_cq *bic;
- unsigned long sl;
+ u32 sl;
BUG_ON(!RB_EMPTY_ROOT(&bfqq->sort_list));
@@ -1728,59 +2245,343 @@ static void bfq_arm_slice_timer(struct bfq_data *bfqd)
sl = bfqd->bfq_slice_idle;
/*
* Unless the queue is being weight-raised or the scenario is
- * asymmetric, grant only minimum idle time if the queue either
- * has been seeky for long enough or has already proved to be
- * constantly seeky.
+ * asymmetric, grant only minimum idle time if the queue
+ * is seeky. A long idling is preserved for a weight-raised
+ * queue, or, more in general, in an asymemtric scenario,
+ * because a long idling is needed for guaranteeing to a queue
+ * its reserved share of the throughput (in particular, it is
+ * needed if the queue has a higher weight than some other
+ * queue).
*/
- if (bfq_sample_valid(bfqq->seek_samples) &&
- ((BFQQ_SEEKY(bfqq) && bfqq->entity.service >
- bfq_max_budget(bfqq->bfqd) / 8) ||
- bfq_bfqq_constantly_seeky(bfqq)) && bfqq->wr_coeff == 1 &&
+ if (BFQQ_SEEKY(bfqq) && bfqq->wr_coeff == 1 &&
bfq_symmetric_scenario(bfqd))
- sl = min(sl, msecs_to_jiffies(BFQ_MIN_TT));
- else if (bfqq->wr_coeff > 1)
- sl = sl * 3;
+ sl = min_t(u32, sl, BFQ_MIN_TT);
+
bfqd->last_idling_start = ktime_get();
- mod_timer(&bfqd->idle_slice_timer, jiffies + sl);
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ hrtimer_start(&bfqd->idle_slice_timer, ns_to_ktime(sl),
+ HRTIMER_MODE_REL);
bfqg_stats_set_start_idle_time(bfqq_group(bfqq));
-#endif
- bfq_log(bfqd, "arm idle: %u/%u ms",
- jiffies_to_msecs(sl), jiffies_to_msecs(bfqd->bfq_slice_idle));
+ bfq_log(bfqd, "arm idle: %ld/%ld ms",
+ sl / NSEC_PER_MSEC, bfqd->bfq_slice_idle / NSEC_PER_MSEC);
}
/*
- * Set the maximum time for the in-service queue to consume its
- * budget. This prevents seeky processes from lowering the disk
- * throughput (always guaranteed with a time slice scheme as in CFQ).
+ * In autotuning mode, max_budget is dynamically recomputed as the
+ * amount of sectors transferred in timeout at the estimated peak
+ * rate. This enables BFQ to utilize a full timeslice with a full
+ * budget, even if the in-service queue is served at peak rate. And
+ * this maximises throughput with sequential workloads.
*/
-static void bfq_set_budget_timeout(struct bfq_data *bfqd)
+static unsigned long bfq_calc_max_budget(struct bfq_data *bfqd)
{
- struct bfq_queue *bfqq = bfqd->in_service_queue;
- unsigned int timeout_coeff;
+ return (u64)bfqd->peak_rate * USEC_PER_MSEC *
+ jiffies_to_msecs(bfqd->bfq_timeout)>>BFQ_RATE_SHIFT;
+}
- if (bfqq->wr_cur_max_time == bfqd->bfq_wr_rt_max_time)
- timeout_coeff = 1;
+/*
+ * Update parameters related to throughput and responsiveness, as a
+ * function of the estimated peak rate. See comments on
+ * bfq_calc_max_budget(), and on T_slow and T_fast arrays.
+ */
+void update_thr_responsiveness_params(struct bfq_data *bfqd)
+{
+ int dev_type = blk_queue_nonrot(bfqd->queue);
+
+ if (bfqd->bfq_user_max_budget == 0) {
+ bfqd->bfq_max_budget =
+ bfq_calc_max_budget(bfqd);
+ BUG_ON(bfqd->bfq_max_budget < 0);
+ bfq_log(bfqd, "new max_budget = %d",
+ bfqd->bfq_max_budget);
+ }
+
+ if (bfqd->device_speed == BFQ_BFQD_FAST &&
+ bfqd->peak_rate < device_speed_thresh[dev_type]) {
+ bfqd->device_speed = BFQ_BFQD_SLOW;
+ bfqd->RT_prod = R_slow[dev_type] *
+ T_slow[dev_type];
+ } else if (bfqd->device_speed == BFQ_BFQD_SLOW &&
+ bfqd->peak_rate > device_speed_thresh[dev_type]) {
+ bfqd->device_speed = BFQ_BFQD_FAST;
+ bfqd->RT_prod = R_fast[dev_type] *
+ T_fast[dev_type];
+ }
+
+ bfq_log(bfqd,
+"dev_type %s dev_speed_class = %s (%llu sects/sec), thresh %llu setcs/sec",
+ dev_type == 0 ? "ROT" : "NONROT",
+ bfqd->device_speed == BFQ_BFQD_FAST ? "FAST" : "SLOW",
+ bfqd->device_speed == BFQ_BFQD_FAST ?
+ (USEC_PER_SEC*(u64)R_fast[dev_type])>>BFQ_RATE_SHIFT :
+ (USEC_PER_SEC*(u64)R_slow[dev_type])>>BFQ_RATE_SHIFT,
+ (USEC_PER_SEC*(u64)device_speed_thresh[dev_type])>>
+ BFQ_RATE_SHIFT);
+}
+
+void bfq_reset_rate_computation(struct bfq_data *bfqd, struct request *rq)
+{
+ if (rq != NULL) { /* new rq dispatch now, reset accordingly */
+ bfqd->last_dispatch = bfqd->first_dispatch = ktime_get_ns() ;
+ bfqd->peak_rate_samples = 1;
+ bfqd->sequential_samples = 0;
+ bfqd->tot_sectors_dispatched = bfqd->last_rq_max_size =
+ blk_rq_sectors(rq);
+ } else /* no new rq dispatched, just reset the number of samples */
+ bfqd->peak_rate_samples = 0; /* full re-init on next disp. */
+
+ bfq_log(bfqd,
+ "reset_rate_computation at end, sample %u/%u tot_sects %llu",
+ bfqd->peak_rate_samples, bfqd->sequential_samples,
+ bfqd->tot_sectors_dispatched);
+}
+
+void bfq_update_rate_reset(struct bfq_data *bfqd, struct request *rq)
+{
+ u32 rate, weight, divisor;
+
+ /*
+ * For the convergence property to hold (see comments on
+ * bfq_update_peak_rate()) and for the assessment to be
+ * reliable, a minimum number of samples must be present, and
+ * a minimum amount of time must have elapsed. If not so, do
+ * not compute new rate. Just reset parameters, to get ready
+ * for a new evaluation attempt.
+ */
+ if (bfqd->peak_rate_samples < BFQ_RATE_MIN_SAMPLES ||
+ bfqd->delta_from_first < BFQ_RATE_MIN_INTERVAL) {
+ bfq_log(bfqd,
+ "update_rate_reset: only resetting, delta_first %lluus samples %d",
+ bfqd->delta_from_first>>10, bfqd->peak_rate_samples);
+ goto reset_computation;
+ }
+
+ /*
+ * If a new request completion has occurred after last
+ * dispatch, then, to approximate the rate at which requests
+ * have been served by the device, it is more precise to
+ * extend the observation interval to the last completion.
+ */
+ bfqd->delta_from_first =
+ max_t(u64, bfqd->delta_from_first,
+ bfqd->last_completion - bfqd->first_dispatch);
+
+ BUG_ON(bfqd->delta_from_first == 0);
+ /*
+ * Rate computed in sects/usec, and not sects/nsec, for
+ * precision issues.
+ */
+ rate = div64_ul(bfqd->tot_sectors_dispatched<<BFQ_RATE_SHIFT,
+ div_u64(bfqd->delta_from_first, NSEC_PER_USEC));
+
+ bfq_log(bfqd,
+"update_rate_reset: tot_sects %llu delta_first %lluus rate %llu sects/s (%d)",
+ bfqd->tot_sectors_dispatched, bfqd->delta_from_first>>10,
+ ((USEC_PER_SEC*(u64)rate)>>BFQ_RATE_SHIFT),
+ rate > 20<<BFQ_RATE_SHIFT);
+
+ /*
+ * Peak rate not updated if:
+ * - the percentage of sequential dispatches is below 3/4 of the
+ * total, and rate is below the current estimated peak rate
+ * - rate is unreasonably high (> 20M sectors/sec)
+ */
+ if ((bfqd->peak_rate_samples > (3 * bfqd->sequential_samples)>>2 &&
+ rate <= bfqd->peak_rate) ||
+ rate > 20<<BFQ_RATE_SHIFT) {
+ bfq_log(bfqd,
+ "update_rate_reset: goto reset, samples %u/%u rate/peak %llu/%llu",
+ bfqd->peak_rate_samples, bfqd->sequential_samples,
+ ((USEC_PER_SEC*(u64)rate)>>BFQ_RATE_SHIFT),
+ ((USEC_PER_SEC*(u64)bfqd->peak_rate)>>BFQ_RATE_SHIFT));
+ goto reset_computation;
+ } else {
+ bfq_log(bfqd,
+ "update_rate_reset: do update, samples %u/%u rate/peak %llu/%llu",
+ bfqd->peak_rate_samples, bfqd->sequential_samples,
+ ((USEC_PER_SEC*(u64)rate)>>BFQ_RATE_SHIFT),
+ ((USEC_PER_SEC*(u64)bfqd->peak_rate)>>BFQ_RATE_SHIFT));
+ }
+
+ /*
+ * We have to update the peak rate, at last! To this purpose,
+ * we use a low-pass filter. We compute the smoothing constant
+ * of the filter as a function of the 'weight' of the new
+ * measured rate.
+ *
+ * As can be seen in next formulas, we define this weight as a
+ * quantity proportional to how sequential the workload is,
+ * and to how long the observation time interval is.
+ *
+ * The weight runs from 0 to 8. The maximum value of the
+ * weight, 8, yields the minimum value for the smoothing
+ * constant. At this minimum value for the smoothing constant,
+ * the measured rate contributes for half of the next value of
+ * the estimated peak rate.
+ *
+ * So, the first step is to compute the weight as a function
+ * of how sequential the workload is. Note that the weight
+ * cannot reach 9, because bfqd->sequential_samples cannot
+ * become equal to bfqd->peak_rate_samples, which, in its
+ * turn, holds true because bfqd->sequential_samples is not
+ * incremented for the first sample.
+ */
+ weight = (9 * bfqd->sequential_samples) / bfqd->peak_rate_samples;
+
+ /*
+ * Second step: further refine the weight as a function of the
+ * duration of the observation interval.
+ */
+ weight = min_t(u32, 8,
+ div_u64(weight * bfqd->delta_from_first,
+ BFQ_RATE_REF_INTERVAL));
+
+ /*
+ * Divisor ranging from 10, for minimum weight, to 2, for
+ * maximum weight.
+ */
+ divisor = 10 - weight;
+ BUG_ON(divisor == 0);
+
+ /*
+ * Finally, update peak rate:
+ *
+ * peak_rate = peak_rate * (divisor-1) / divisor + rate / divisor
+ */
+ bfqd->peak_rate *= divisor-1;
+ bfqd->peak_rate /= divisor;
+ rate /= divisor; /* smoothing constant alpha = 1/divisor */
+
+ bfq_log(bfqd,
+ "update_rate_reset: divisor %d tmp_peak_rate %llu tmp_rate %u",
+ divisor,
+ ((USEC_PER_SEC*(u64)bfqd->peak_rate)>>BFQ_RATE_SHIFT),
+ (u32)((USEC_PER_SEC*(u64)rate)>>BFQ_RATE_SHIFT));
+
+ BUG_ON(bfqd->peak_rate == 0);
+ BUG_ON(bfqd->peak_rate > 20<<BFQ_RATE_SHIFT);
+
+ bfqd->peak_rate += rate;
+ update_thr_responsiveness_params(bfqd);
+ BUG_ON(bfqd->peak_rate > 20<<BFQ_RATE_SHIFT);
+
+reset_computation:
+ bfq_reset_rate_computation(bfqd, rq);
+}
+
+/*
+ * Update the read/write peak rate (the main quantity used for
+ * auto-tuning, see update_thr_responsiveness_params()).
+ *
+ * It is not trivial to estimate the peak rate (correctly): because of
+ * the presence of sw and hw queues between the scheduler and the
+ * device components that finally serve I/O requests, it is hard to
+ * say exactly when a given dispatched request is served inside the
+ * device, and for how long. As a consequence, it is hard to know
+ * precisely at what rate a given set of requests is actually served
+ * by the device.
+ *
+ * On the opposite end, the dispatch time of any request is trivially
+ * available, and, from this piece of information, the "dispatch rate"
+ * of requests can be immediately computed. So, the idea in the next
+ * function is to use what is known, namely request dispatch times
+ * (plus, when useful, request completion times), to estimate what is
+ * unknown, namely in-device request service rate.
+ *
+ * The main issue is that, because of the above facts, the rate at
+ * which a certain set of requests is dispatched over a certain time
+ * interval can vary greatly with respect to the rate at which the
+ * same requests are then served. But, since the size of any
+ * intermediate queue is limited, and the service scheme is lossless
+ * (no request is silently dropped), the following obvious convergence
+ * property holds: the number of requests dispatched MUST become
+ * closer and closer to the number of requests completed as the
+ * observation interval grows. This is the key property used in
+ * the next function to estimate the peak service rate as a function
+ * of the observed dispatch rate. The function assumes to be invoked
+ * on every request dispatch.
+ */
+void bfq_update_peak_rate(struct bfq_data *bfqd, struct request *rq)
+{
+ u64 now_ns = ktime_get_ns();
+
+ if (bfqd->peak_rate_samples == 0) { /* first dispatch */
+ bfq_log(bfqd,
+ "update_peak_rate: goto reset, samples %d",
+ bfqd->peak_rate_samples) ;
+ bfq_reset_rate_computation(bfqd, rq);
+ goto update_last_values; /* will add one sample */
+ }
+
+ /*
+ * Device idle for very long: the observation interval lasting
+ * up to this dispatch cannot be a valid observation interval
+ * for computing a new peak rate (similarly to the late-
+ * completion event in bfq_completed_request()). Go to
+ * update_rate_and_reset to have the following three steps
+ * taken:
+ * - close the observation interval at the last (previous)
+ * request dispatch or completion
+ * - compute rate, if possible, for that observation interval
+ * - start a new observation interval with this dispatch
+ */
+ if (now_ns - bfqd->last_dispatch > 100*NSEC_PER_MSEC &&
+ bfqd->rq_in_driver == 0) {
+ bfq_log(bfqd,
+"update_peak_rate: jumping to updating&resetting delta_last %lluus samples %d",
+ (now_ns - bfqd->last_dispatch)>>10,
+ bfqd->peak_rate_samples) ;
+ goto update_rate_and_reset;
+ }
+
+ /* Update sampling information */
+ bfqd->peak_rate_samples++;
+
+ if ((bfqd->rq_in_driver > 0 ||
+ now_ns - bfqd->last_completion < BFQ_MIN_TT)
+ && get_sdist(bfqd->last_position, rq) < BFQQ_SEEK_THR)
+ bfqd->sequential_samples++;
+
+ bfqd->tot_sectors_dispatched += blk_rq_sectors(rq);
+
+ /* Reset max observed rq size every 32 dispatches */
+ if (likely(bfqd->peak_rate_samples % 32))
+ bfqd->last_rq_max_size =
+ max_t(u32, blk_rq_sectors(rq), bfqd->last_rq_max_size);
else
- timeout_coeff = bfqq->entity.weight / bfqq->entity.orig_weight;
+ bfqd->last_rq_max_size = blk_rq_sectors(rq);
- bfqd->last_budget_start = ktime_get();
+ bfqd->delta_from_first = now_ns - bfqd->first_dispatch;
- bfq_clear_bfqq_budget_new(bfqq);
- bfqq->budget_timeout = jiffies +
- bfqd->bfq_timeout[bfq_bfqq_sync(bfqq)] * timeout_coeff;
+ bfq_log(bfqd,
+ "update_peak_rate: added samples %u/%u tot_sects %llu delta_first %lluus",
+ bfqd->peak_rate_samples, bfqd->sequential_samples,
+ bfqd->tot_sectors_dispatched,
+ bfqd->delta_from_first>>10);
- bfq_log_bfqq(bfqd, bfqq, "set budget_timeout %u",
- jiffies_to_msecs(bfqd->bfq_timeout[bfq_bfqq_sync(bfqq)] *
- timeout_coeff));
+ /* Target observation interval not yet reached, go on sampling */
+ if (bfqd->delta_from_first < BFQ_RATE_REF_INTERVAL)
+ goto update_last_values;
+
+update_rate_and_reset:
+ bfq_update_rate_reset(bfqd, rq);
+update_last_values:
+ bfqd->last_position = blk_rq_pos(rq) + blk_rq_sectors(rq);
+ bfqd->last_dispatch = now_ns;
+
+ bfq_log(bfqd,
+ "update_peak_rate: delta_first %lluus last_pos %llu peak_rate %llu",
+ (now_ns - bfqd->first_dispatch)>>10,
+ (unsigned long long) bfqd->last_position,
+ ((USEC_PER_SEC*(u64)bfqd->peak_rate)>>BFQ_RATE_SHIFT));
+ bfq_log(bfqd,
+ "update_peak_rate: samples at end %d", bfqd->peak_rate_samples);
}
/*
- * Move request from internal lists to the request queue dispatch list.
+ * Move request from internal lists to the dispatch list of the request queue
*/
static void bfq_dispatch_insert(struct request_queue *q, struct request *rq)
{
- struct bfq_data *bfqd = q->elevator->elevator_data;
struct bfq_queue *bfqq = RQ_BFQQ(rq);
/*
@@ -1794,15 +2595,10 @@ static void bfq_dispatch_insert(struct request_queue *q, struct request *rq)
* incrementing bfqq->dispatched.
*/
bfqq->dispatched++;
+ bfq_update_peak_rate(q->elevator->elevator_data, rq);
+
bfq_remove_request(rq);
elv_dispatch_sort(q, rq);
-
- if (bfq_bfqq_sync(bfqq))
- bfqd->sync_flight++;
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
- bfqg_stats_update_dispatch(bfqq_group(bfqq), blk_rq_bytes(rq),
- rq->cmd_flags);
-#endif
}
/*
@@ -1822,19 +2618,12 @@ static struct request *bfq_check_fifo(struct bfq_queue *bfqq)
rq = rq_entry_fifo(bfqq->fifo.next);
- if (time_before(jiffies, rq->fifo_time))
+ if (ktime_get_ns() < rq->fifo_time)
return NULL;
return rq;
}
-static int bfq_bfqq_budget_left(struct bfq_queue *bfqq)
-{
- struct bfq_entity *entity = &bfqq->entity;
-
- return entity->budget - entity->service;
-}
-
static void __bfq_bfqq_expire(struct bfq_data *bfqd, struct bfq_queue *bfqq)
{
BUG_ON(bfqq != bfqd->in_service_queue);
@@ -1851,12 +2640,15 @@ static void __bfq_bfqq_expire(struct bfq_data *bfqd, struct bfq_queue *bfqq)
bfq_mark_bfqq_split_coop(bfqq);
if (RB_EMPTY_ROOT(&bfqq->sort_list)) {
- /*
- * Overloading budget_timeout field to store the time
- * at which the queue remains with no backlog; used by
- * the weight-raising mechanism.
- */
- bfqq->budget_timeout = jiffies;
+ if (bfqq->dispatched == 0)
+ /*
+ * Overloading budget_timeout field to store
+ * the time at which the queue remains with no
+ * backlog and no outstanding request; used by
+ * the weight-raising mechanism.
+ */
+ bfqq->budget_timeout = jiffies;
+
bfq_del_bfqq_busy(bfqd, bfqq, 1);
} else {
bfq_activate_bfqq(bfqd, bfqq);
@@ -1883,10 +2675,19 @@ static void __bfq_bfqq_recalc_budget(struct bfq_data *bfqd,
struct request *next_rq;
int budget, min_budget;
- budget = bfqq->max_budget;
+ BUG_ON(bfqq != bfqd->in_service_queue);
+
min_budget = bfq_min_budget(bfqd);
- BUG_ON(bfqq != bfqd->in_service_queue);
+ if (bfqq->wr_coeff == 1)
+ budget = bfqq->max_budget;
+ else /*
+ * Use a constant, low budget for weight-raised queues,
+ * to help achieve a low latency. Keep it slightly higher
+ * than the minimum possible budget, to cause a little
+ * bit fewer expirations.
+ */
+ budget = 2 * min_budget;
bfq_log_bfqq(bfqd, bfqq, "recalc_budg: last budg %d, budg left %d",
bfqq->entity.budget, bfq_bfqq_budget_left(bfqq));
@@ -1895,7 +2696,7 @@ static void __bfq_bfqq_recalc_budget(struct bfq_data *bfqd,
bfq_log_bfqq(bfqd, bfqq, "recalc_budg: sync %d, seeky %d",
bfq_bfqq_sync(bfqq), BFQQ_SEEKY(bfqd->in_service_queue));
- if (bfq_bfqq_sync(bfqq)) {
+ if (bfq_bfqq_sync(bfqq) && bfqq->wr_coeff == 1) {
switch (reason) {
/*
* Caveat: in all the following cases we trade latency
@@ -1937,14 +2738,10 @@ static void __bfq_bfqq_recalc_budget(struct bfq_data *bfqd,
break;
case BFQ_BFQQ_BUDGET_TIMEOUT:
/*
- * We double the budget here because: 1) it
- * gives the chance to boost the throughput if
- * this is not a seeky process (which may have
- * bumped into this timeout because of, e.g.,
- * ZBR), 2) together with charge_full_budget
- * it helps give seeky processes higher
- * timestamps, and hence be served less
- * frequently.
+ * We double the budget here because it gives
+ * the chance to boost the throughput if this
+ * is not a seeky process (and has bumped into
+ * this timeout because of, e.g., ZBR).
*/
budget = min(budget * 2, bfqd->bfq_max_budget);
break;
@@ -1961,17 +2758,49 @@ static void __bfq_bfqq_recalc_budget(struct bfq_data *bfqd,
budget = min(budget * 4, bfqd->bfq_max_budget);
break;
case BFQ_BFQQ_NO_MORE_REQUESTS:
- /*
- * Leave the budget unchanged.
- */
+ /*
+ * For queues that expire for this reason, it
+ * is particularly important to keep the
+ * budget close to the actual service they
+ * need. Doing so reduces the timestamp
+ * misalignment problem described in the
+ * comments in the body of
+ * __bfq_activate_entity. In fact, suppose
+ * that a queue systematically expires for
+ * BFQ_BFQQ_NO_MORE_REQUESTS and presents a
+ * new request in time to enjoy timestamp
+ * back-shifting. The larger the budget of the
+ * queue is with respect to the service the
+ * queue actually requests in each service
+ * slot, the more times the queue can be
+ * reactivated with the same virtual finish
+ * time. It follows that, even if this finish
+ * time is pushed to the system virtual time
+ * to reduce the consequent timestamp
+ * misalignment, the queue unjustly enjoys for
+ * many re-activations a lower finish time
+ * than all newly activated queues.
+ *
+ * The service needed by bfqq is measured
+ * quite precisely by bfqq->entity.service.
+ * Since bfqq does not enjoy device idling,
+ * bfqq->entity.service is equal to the number
+ * of sectors that the process associated with
+ * bfqq requested to read/write before waiting
+ * for request completions, or blocking for
+ * other reasons.
+ */
+ budget = max_t(int, bfqq->entity.service, min_budget);
+ break;
default:
return;
}
- } else
+ } else if (!bfq_bfqq_sync(bfqq))
/*
- * Async queues get always the maximum possible budget
- * (their ability to dispatch is limited by
- * @bfqd->bfq_max_budget_async_rq).
+ * Async queues get always the maximum possible
+ * budget, as for them we do not care about latency
+ * (in addition, their ability to dispatch is limited
+ * by the charging factor).
*/
budget = bfqd->bfq_max_budget;
@@ -1982,160 +2811,120 @@ static void __bfq_bfqq_recalc_budget(struct bfq_data *bfqd,
bfqq->max_budget = min(bfqq->max_budget, bfqd->bfq_max_budget);
/*
- * Make sure that we have enough budget for the next request.
- * Since the finish time of the bfqq must be kept in sync with
- * the budget, be sure to call __bfq_bfqq_expire() after the
+ * If there is still backlog, then assign a new budget, making
+ * sure that it is large enough for the next request. Since
+ * the finish time of bfqq must be kept in sync with the
+ * budget, be sure to call __bfq_bfqq_expire() *after* this
* update.
+ *
+ * If there is no backlog, then no need to update the budget;
+ * it will be updated on the arrival of a new request.
*/
next_rq = bfqq->next_rq;
- if (next_rq)
+ if (next_rq) {
+ BUG_ON(reason == BFQ_BFQQ_TOO_IDLE ||
+ reason == BFQ_BFQQ_NO_MORE_REQUESTS);
bfqq->entity.budget = max_t(unsigned long, bfqq->max_budget,
bfq_serv_to_charge(next_rq, bfqq));
- else
- bfqq->entity.budget = bfqq->max_budget;
+ BUG_ON(!bfq_bfqq_busy(bfqq));
+ BUG_ON(RB_EMPTY_ROOT(&bfqq->sort_list));
+ }
bfq_log_bfqq(bfqd, bfqq, "head sect: %u, new budget %d",
next_rq ? blk_rq_sectors(next_rq) : 0,
bfqq->entity.budget);
}
-static unsigned long bfq_calc_max_budget(u64 peak_rate, u64 timeout)
-{
- unsigned long max_budget;
-
- /*
- * The max_budget calculated when autotuning is equal to the
- * amount of sectors transfered in timeout_sync at the
- * estimated peak rate.
- */
- max_budget = (unsigned long)(peak_rate * 1000 *
- timeout >> BFQ_RATE_SHIFT);
-
- return max_budget;
-}
-
/*
- * In addition to updating the peak rate, checks whether the process
- * is "slow", and returns 1 if so. This slow flag is used, in addition
- * to the budget timeout, to reduce the amount of service provided to
- * seeky processes, and hence reduce their chances to lower the
- * throughput. See the code for more details.
+ * Return true if the process associated with bfqq is "slow". The slow
+ * flag is used, in addition to the budget timeout, to reduce the
+ * amount of service provided to seeky processes, and thus reduce
+ * their chances to lower the throughput. More details in the comments
+ * on the function bfq_bfqq_expire().
+ *
+ * An important observation is in order: as discussed in the comments
+ * on the function bfq_update_peak_rate(), with devices with internal
+ * queues, it is hard if ever possible to know when and for how long
+ * an I/O request is processed by the device (apart from the trivial
+ * I/O pattern where a new request is dispatched only after the
+ * previous one has been completed). This makes it hard to evaluate
+ * the real rate at which the I/O requests of each bfq_queue are
+ * served. In fact, for an I/O scheduler like BFQ, serving a
+ * bfq_queue means just dispatching its requests during its service
+ * slot (i.e., until the budget of the queue is exhausted, or the
+ * queue remains idle, or, finally, a timeout fires). But, during the
+ * service slot of a bfq_queue, around 100 ms at most, the device may
+ * be even still processing requests of bfq_queues served in previous
+ * service slots. On the opposite end, the requests of the in-service
+ * bfq_queue may be completed after the service slot of the queue
+ * finishes.
+ *
+ * Anyway, unless more sophisticated solutions are used
+ * (where possible), the sum of the sizes of the requests dispatched
+ * during the service slot of a bfq_queue is probably the only
+ * approximation available for the service received by the bfq_queue
+ * during its service slot. And this sum is the quantity used in this
+ * function to evaluate the I/O speed of a process.
*/
-static bool bfq_update_peak_rate(struct bfq_data *bfqd, struct bfq_queue *bfqq,
- bool compensate, enum bfqq_expiration reason)
+static bool bfq_bfqq_is_slow(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+ bool compensate, enum bfqq_expiration reason,
+ unsigned long *delta_ms)
{
- u64 bw, usecs, expected, timeout;
- ktime_t delta;
- int update = 0;
+ ktime_t delta_ktime;
+ u32 delta_usecs;
+ bool slow = BFQQ_SEEKY(bfqq); /* if delta too short, use seekyness */
- if (!bfq_bfqq_sync(bfqq) || bfq_bfqq_budget_new(bfqq))
+ if (!bfq_bfqq_sync(bfqq))
return false;
if (compensate)
- delta = bfqd->last_idling_start;
- else
- delta = ktime_get();
- delta = ktime_sub(delta, bfqd->last_budget_start);
- usecs = ktime_to_us(delta);
-
- /* Don't trust short/unrealistic values. */
- if (usecs < 100 || usecs >= LONG_MAX)
- return false;
-
- /*
- * Calculate the bandwidth for the last slice. We use a 64 bit
- * value to store the peak rate, in sectors per usec in fixed
- * point math. We do so to have enough precision in the estimate
- * and to avoid overflows.
- */
- bw = (u64)bfqq->entity.service << BFQ_RATE_SHIFT;
- do_div(bw, (unsigned long)usecs);
-
- timeout = jiffies_to_msecs(bfqd->bfq_timeout[BLK_RW_SYNC]);
-
- /*
- * Use only long (> 20ms) intervals to filter out spikes for
- * the peak rate estimation.
- */
- if (usecs > 20000) {
- if (bw > bfqd->peak_rate ||
- (!BFQQ_SEEKY(bfqq) &&
- reason == BFQ_BFQQ_BUDGET_TIMEOUT)) {
- bfq_log(bfqd, "measured bw =%llu", bw);
- /*
- * To smooth oscillations use a low-pass filter with
- * alpha=7/8, i.e.,
- * new_rate = (7/8) * old_rate + (1/8) * bw
- */
- do_div(bw, 8);
- if (bw == 0)
- return 0;
- bfqd->peak_rate *= 7;
- do_div(bfqd->peak_rate, 8);
- bfqd->peak_rate += bw;
- update = 1;
- bfq_log(bfqd, "new peak_rate=%llu", bfqd->peak_rate);
- }
-
- update |= bfqd->peak_rate_samples == BFQ_PEAK_RATE_SAMPLES - 1;
-
- if (bfqd->peak_rate_samples < BFQ_PEAK_RATE_SAMPLES)
- bfqd->peak_rate_samples++;
-
- if (bfqd->peak_rate_samples == BFQ_PEAK_RATE_SAMPLES &&
- update) {
- int dev_type = blk_queue_nonrot(bfqd->queue);
-
- if (bfqd->bfq_user_max_budget == 0) {
- bfqd->bfq_max_budget =
- bfq_calc_max_budget(bfqd->peak_rate,
- timeout);
- bfq_log(bfqd, "new max_budget=%d",
- bfqd->bfq_max_budget);
- }
- if (bfqd->device_speed == BFQ_BFQD_FAST &&
- bfqd->peak_rate < device_speed_thresh[dev_type]) {
- bfqd->device_speed = BFQ_BFQD_SLOW;
- bfqd->RT_prod = R_slow[dev_type] *
- T_slow[dev_type];
- } else if (bfqd->device_speed == BFQ_BFQD_SLOW &&
- bfqd->peak_rate > device_speed_thresh[dev_type]) {
- bfqd->device_speed = BFQ_BFQD_FAST;
- bfqd->RT_prod = R_fast[dev_type] *
- T_fast[dev_type];
- }
- }
+ delta_ktime = bfqd->last_idling_start;
+ else
+ delta_ktime = ktime_get();
+ delta_ktime = ktime_sub(delta_ktime, bfqd->last_budget_start);
+ delta_usecs = ktime_to_us(delta_ktime);
+
+ /* don't trust short/unrealistic values. */
+ if (delta_usecs < 1000 || delta_usecs >= LONG_MAX) {
+ if (blk_queue_nonrot(bfqd->queue))
+ /*
+ * give same worst-case guarantees as idling
+ * for seeky
+ */
+ *delta_ms = BFQ_MIN_TT / NSEC_PER_MSEC;
+ else /* charge at least one seek */
+ *delta_ms = bfq_slice_idle / NSEC_PER_MSEC;
+
+ bfq_log(bfqd, "bfq_bfqq_is_slow: unrealistic %u", delta_usecs);
+
+ return slow;
}
- /*
- * If the process has been served for a too short time
- * interval to let its possible sequential accesses prevail on
- * the initial seek time needed to move the disk head on the
- * first sector it requested, then give the process a chance
- * and for the moment return false.
- */
- if (bfqq->entity.budget <= bfq_max_budget(bfqd) / 8)
- return false;
+ *delta_ms = delta_usecs / USEC_PER_MSEC;
/*
- * A process is considered ``slow'' (i.e., seeky, so that we
- * cannot treat it fairly in the service domain, as it would
- * slow down too much the other processes) if, when a slice
- * ends for whatever reason, it has received service at a
- * rate that would not be high enough to complete the budget
- * before the budget timeout expiration.
+ * Use only long (> 20ms) intervals to filter out excessive
+ * spikes in service rate estimation.
*/
- expected = bw * 1000 * timeout >> BFQ_RATE_SHIFT;
+ if (delta_usecs > 20000) {
+ /*
+ * Caveat for rotational devices: processes doing I/O
+ * in the slower disk zones tend to be slow(er) even
+ * if not seeky. In this respect, the estimated peak
+ * rate is likely to be an average over the disk
+ * surface. Accordingly, to not be too harsh with
+ * unlucky processes, a process is deemed slow only if
+ * its rate has been lower than half of the estimated
+ * peak rate.
+ */
+ slow = bfqq->entity.service < bfqd->bfq_max_budget / 2;
+ bfq_log(bfqd, "bfq_bfqq_is_slow: relative rate %d/%d",
+ bfqq->entity.service, bfqd->bfq_max_budget);
+ }
- /*
- * Caveat: processes doing IO in the slower disk zones will
- * tend to be slow(er) even if not seeky. And the estimated
- * peak rate will actually be an average over the disk
- * surface. Hence, to not be too harsh with unlucky processes,
- * we keep a budget/3 margin of safety before declaring a
- * process slow.
- */
- return expected > (4 * bfqq->entity.budget) / 3;
+ bfq_log_bfqq(bfqd, bfqq, "bfq_bfqq_is_slow: slow %d", slow);
+
+ return slow;
}
/*
@@ -2193,20 +2982,35 @@ static bool bfq_update_peak_rate(struct bfq_data *bfqd, struct bfq_queue *bfqq,
static unsigned long bfq_bfqq_softrt_next_start(struct bfq_data *bfqd,
struct bfq_queue *bfqq)
{
+ bfq_log_bfqq(bfqd, bfqq,
+"softrt_next_start: service_blkg %lu soft_rate %u sects/sec interval %u",
+ bfqq->service_from_backlogged,
+ bfqd->bfq_wr_max_softrt_rate,
+ jiffies_to_msecs(HZ * bfqq->service_from_backlogged /
+ bfqd->bfq_wr_max_softrt_rate));
+
return max(bfqq->last_idle_bklogged +
HZ * bfqq->service_from_backlogged /
bfqd->bfq_wr_max_softrt_rate,
- jiffies + bfqq->bfqd->bfq_slice_idle + 4);
+ jiffies + nsecs_to_jiffies(bfqq->bfqd->bfq_slice_idle) + 4);
+}
+
+/*
+ * Return the farthest future time instant according to jiffies
+ * macros.
+ */
+static unsigned long bfq_greatest_from_now(void)
+{
+ return jiffies + MAX_JIFFY_OFFSET;
}
/*
- * Return the largest-possible time instant such that, for as long as possible,
- * the current time will be lower than this time instant according to the macro
- * time_is_before_jiffies().
+ * Return the farthest past time instant according to jiffies
+ * macros.
*/
-static unsigned long bfq_infinity_from_now(unsigned long now)
+static unsigned long bfq_smallest_from_now(void)
{
- return now + ULONG_MAX / 2;
+ return jiffies - MAX_JIFFY_OFFSET;
}
/**
@@ -2216,28 +3020,24 @@ static unsigned long bfq_infinity_from_now(unsigned long now)
* @compensate: if true, compensate for the time spent idling.
* @reason: the reason causing the expiration.
*
+ * If the process associated with bfqq does slow I/O (e.g., because it
+ * issues random requests), we charge bfqq with the time it has been
+ * in service instead of the service it has received (see
+ * bfq_bfqq_charge_time for details on how this goal is achieved). As
+ * a consequence, bfqq will typically get higher timestamps upon
+ * reactivation, and hence it will be rescheduled as if it had
+ * received more service than what it has actually received. In the
+ * end, bfqq receives less service in proportion to how slowly its
+ * associated process consumes its budgets (and hence how seriously it
+ * tends to lower the throughput). In addition, this time-charging
+ * strategy guarantees time fairness among slow processes. In
+ * contrast, if the process associated with bfqq is not slow, we
+ * charge bfqq exactly with the service it has received.
*
- * If the process associated to the queue is slow (i.e., seeky), or in
- * case of budget timeout, or, finally, if it is async, we
- * artificially charge it an entire budget (independently of the
- * actual service it received). As a consequence, the queue will get
- * higher timestamps than the correct ones upon reactivation, and
- * hence it will be rescheduled as if it had received more service
- * than what it actually received. In the end, this class of processes
- * will receive less service in proportion to how slowly they consume
- * their budgets (and hence how seriously they tend to lower the
- * throughput).
- *
- * In contrast, when a queue expires because it has been idling for
- * too much or because it exhausted its budget, we do not touch the
- * amount of service it has received. Hence when the queue will be
- * reactivated and its timestamps updated, the latter will be in sync
- * with the actual service received by the queue until expiration.
- *
- * Charging a full budget to the first type of queues and the exact
- * service to the others has the effect of using the WF2Q+ policy to
- * schedule the former on a timeslice basis, without violating the
- * service domain guarantees of the latter.
+ * Charging time to the first type of queues and the exact service to
+ * the other has the effect of using the WF2Q+ policy to schedule the
+ * former on a timeslice basis, without violating service domain
+ * guarantees among the latter.
*/
static void bfq_bfqq_expire(struct bfq_data *bfqd,
struct bfq_queue *bfqq,
@@ -2245,41 +3045,52 @@ static void bfq_bfqq_expire(struct bfq_data *bfqd,
enum bfqq_expiration reason)
{
bool slow;
+ unsigned long delta = 0;
+ struct bfq_entity *entity = &bfqq->entity;
BUG_ON(bfqq != bfqd->in_service_queue);
/*
- * Update disk peak rate for autotuning and check whether the
- * process is slow (see bfq_update_peak_rate).
+ * Check whether the process is slow (see bfq_bfqq_is_slow).
*/
- slow = bfq_update_peak_rate(bfqd, bfqq, compensate, reason);
+ slow = bfq_bfqq_is_slow(bfqd, bfqq, compensate, reason, &delta);
/*
- * As above explained, 'punish' slow (i.e., seeky), timed-out
- * and async queues, to favor sequential sync workloads.
- *
- * Processes doing I/O in the slower disk zones will tend to be
- * slow(er) even if not seeky. Hence, since the estimated peak
- * rate is actually an average over the disk surface, these
- * processes may timeout just for bad luck. To avoid punishing
- * them we do not charge a full budget to a process that
- * succeeded in consuming at least 2/3 of its budget.
+ * Increase service_from_backlogged before next statement,
+ * because the possible next invocation of
+ * bfq_bfqq_charge_time would likely inflate
+ * entity->service. In contrast, service_from_backlogged must
+ * contain real service, to enable the soft real-time
+ * heuristic to correctly compute the bandwidth consumed by
+ * bfqq.
*/
- if (slow || (reason == BFQ_BFQQ_BUDGET_TIMEOUT &&
- bfq_bfqq_budget_left(bfqq) >= bfqq->entity.budget / 3))
- bfq_bfqq_charge_full_budget(bfqq);
+ bfqq->service_from_backlogged += entity->service;
- bfqq->service_from_backlogged += bfqq->entity.service;
+ /*
+ * As above explained, charge slow (typically seeky) and
+ * timed-out queues with the time and not the service
+ * received, to favor sequential workloads.
+ *
+ * Processes doing I/O in the slower disk zones will tend to
+ * be slow(er) even if not seeky. Therefore, since the
+ * estimated peak rate is actually an average over the disk
+ * surface, these processes may timeout just for bad luck. To
+ * avoid punishing them, do not charge time to processes that
+ * succeeded in consuming at least 2/3 of their budget. This
+ * allows BFQ to preserve enough elasticity to still perform
+ * bandwidth, and not time, distribution with little unlucky
+ * or quasi-sequential processes.
+ */
+ if (bfqq->wr_coeff == 1 &&
+ (slow ||
+ (reason == BFQ_BFQQ_BUDGET_TIMEOUT &&
+ bfq_bfqq_budget_left(bfqq) >= entity->budget / 3)))
+ bfq_bfqq_charge_time(bfqd, bfqq, delta);
- if (BFQQ_SEEKY(bfqq) && reason == BFQ_BFQQ_BUDGET_TIMEOUT &&
- !bfq_bfqq_constantly_seeky(bfqq)) {
- bfq_mark_bfqq_constantly_seeky(bfqq);
- if (!blk_queue_nonrot(bfqd->queue))
- bfqd->const_seeky_busy_in_flight_queues++;
- }
+ BUG_ON(bfqq->entity.budget < bfqq->entity.service);
if (reason == BFQ_BFQQ_TOO_IDLE &&
- bfqq->entity.service <= 2 * bfqq->entity.budget / 10)
+ entity->service <= 2 * entity->budget / 10)
bfq_clear_bfqq_IO_bound(bfqq);
if (bfqd->low_latency && bfqq->wr_coeff == 1)
@@ -2288,19 +3099,23 @@ static void bfq_bfqq_expire(struct bfq_data *bfqd,
if (bfqd->low_latency && bfqd->bfq_wr_max_softrt_rate > 0 &&
RB_EMPTY_ROOT(&bfqq->sort_list)) {
/*
- * If we get here, and there are no outstanding requests,
- * then the request pattern is isochronous (see the comments
- * to the function bfq_bfqq_softrt_next_start()). Hence we
- * can compute soft_rt_next_start. If, instead, the queue
- * still has outstanding requests, then we have to wait
- * for the completion of all the outstanding requests to
+ * If we get here, and there are no outstanding
+ * requests, then the request pattern is isochronous
+ * (see the comments on the function
+ * bfq_bfqq_softrt_next_start()). Thus we can compute
+ * soft_rt_next_start. If, instead, the queue still
+ * has outstanding requests, then we have to wait for
+ * the completion of all the outstanding requests to
* discover whether the request pattern is actually
* isochronous.
*/
- if (bfqq->dispatched == 0)
+ BUG_ON(bfqd->busy_queues < 1);
+ if (bfqq->dispatched == 0) {
bfqq->soft_rt_next_start =
bfq_bfqq_softrt_next_start(bfqd, bfqq);
- else {
+ bfq_log_bfqq(bfqd, bfqq, "new soft_rt_next %lu",
+ bfqq->soft_rt_next_start);
+ } else {
/*
* The application is still waiting for the
* completion of one or more requests:
@@ -2317,7 +3132,7 @@ static void bfq_bfqq_expire(struct bfq_data *bfqd,
* happened to be in the past.
*/
bfqq->soft_rt_next_start =
- bfq_infinity_from_now(jiffies);
+ bfq_greatest_from_now();
/*
* Schedule an update of soft_rt_next_start to when
* the task may be discovered to be isochronous.
@@ -2327,15 +3142,27 @@ static void bfq_bfqq_expire(struct bfq_data *bfqd,
}
bfq_log_bfqq(bfqd, bfqq,
- "expire (%d, slow %d, num_disp %d, idle_win %d)", reason,
- slow, bfqq->dispatched, bfq_bfqq_idle_window(bfqq));
+ "expire (%d, slow %d, num_disp %d, idle_win %d, weight %d)",
+ reason, slow, bfqq->dispatched,
+ bfq_bfqq_idle_window(bfqq), entity->weight);
/*
* Increase, decrease or leave budget unchanged according to
* reason.
*/
+ BUG_ON(bfqq->entity.budget < bfqq->entity.service);
__bfq_bfqq_recalc_budget(bfqd, bfqq, reason);
+ BUG_ON(bfqq->next_rq == NULL &&
+ bfqq->entity.budget < bfqq->entity.service);
__bfq_bfqq_expire(bfqd, bfqq);
+
+ BUG_ON(!bfq_bfqq_busy(bfqq) && reason == BFQ_BFQQ_BUDGET_EXHAUSTED &&
+ !bfq_class_idle(bfqq));
+
+ if (!bfq_bfqq_busy(bfqq) &&
+ reason != BFQ_BFQQ_BUDGET_TIMEOUT &&
+ reason != BFQ_BFQQ_BUDGET_EXHAUSTED)
+ bfq_mark_bfqq_non_blocking_wait_rq(bfqq);
}
/*
@@ -2345,20 +3172,17 @@ static void bfq_bfqq_expire(struct bfq_data *bfqd,
*/
static bool bfq_bfqq_budget_timeout(struct bfq_queue *bfqq)
{
- if (bfq_bfqq_budget_new(bfqq) ||
- time_before(jiffies, bfqq->budget_timeout))
- return false;
- return true;
+ return time_is_before_eq_jiffies(bfqq->budget_timeout);
}
/*
- * If we expire a queue that is waiting for the arrival of a new
- * request, we may prevent the fictitious timestamp back-shifting that
- * allows the guarantees of the queue to be preserved (see [1] for
- * this tricky aspect). Hence we return true only if this condition
- * does not hold, or if the queue is slow enough to deserve only to be
- * kicked off for preserving a high throughput.
-*/
+ * If we expire a queue that is actively waiting (i.e., with the
+ * device idled) for the arrival of a new request, then we may incur
+ * the timestamp misalignment problem described in the body of the
+ * function __bfq_activate_entity. Hence we return true only if this
+ * condition does not hold, or if the queue is slow enough to deserve
+ * only to be kicked off for preserving a high throughput.
+ */
static bool bfq_may_expire_for_budg_timeout(struct bfq_queue *bfqq)
{
bfq_log_bfqq(bfqq->bfqd, bfqq,
@@ -2400,10 +3224,12 @@ static bool bfq_bfqq_may_idle(struct bfq_queue *bfqq)
{
struct bfq_data *bfqd = bfqq->bfqd;
bool idling_boosts_thr, idling_boosts_thr_without_issues,
- all_queues_seeky, on_hdd_and_not_all_queues_seeky,
idling_needed_for_service_guarantees,
asymmetric_scenario;
+ if (bfqd->strict_guarantees)
+ return true;
+
/*
* The next variable takes into account the cases where idling
* boosts the throughput.
@@ -2466,74 +3292,27 @@ static bool bfq_bfqq_may_idle(struct bfq_queue *bfqq)
bfqd->wr_busy_queues == 0;
/*
- * There are then two cases where idling must be performed not
+ * There is then a case where idling must be performed not
* for throughput concerns, but to preserve service
- * guarantees. In the description of these cases, we say, for
- * short, that a queue is sequential/random if the process
- * associated to the queue issues sequential/random requests
- * (in the second case the queue may be tagged as seeky or
- * even constantly_seeky).
- *
- * To introduce the first case, we note that, since
- * bfq_bfqq_idle_window(bfqq) is false if the device is
- * NCQ-capable and bfqq is random (see
- * bfq_update_idle_window()), then, from the above two
- * assignments it follows that
- * idling_boosts_thr_without_issues is false if the device is
- * NCQ-capable and bfqq is random. Therefore, for this case,
- * device idling would never be allowed if we used just
- * idling_boosts_thr_without_issues to decide whether to allow
- * it. And, beneficially, this would imply that throughput
- * would always be boosted also with random I/O on NCQ-capable
- * HDDs.
+ * guarantees.
*
- * But we must be careful on this point, to avoid an unfair
- * treatment for bfqq. In fact, because of the same above
- * assignments, idling_boosts_thr_without_issues is, on the
- * other hand, true if 1) the device is an HDD and bfqq is
- * sequential, and 2) there are no busy weight-raised
- * queues. As a consequence, if we used just
- * idling_boosts_thr_without_issues to decide whether to idle
- * the device, then with an HDD we might easily bump into a
- * scenario where queues that are sequential and I/O-bound
- * would enjoy idling, whereas random queues would not. The
- * latter might then get a low share of the device throughput,
- * simply because the former would get many requests served
- * after being set as in service, while the latter would not.
- *
- * To address this issue, we start by setting to true a
- * sentinel variable, on_hdd_and_not_all_queues_seeky, if the
- * device is rotational and not all queues with pending or
- * in-flight requests are constantly seeky (i.e., there are
- * active sequential queues, and bfqq might then be mistreated
- * if it does not enjoy idling because it is random).
- */
- all_queues_seeky = bfq_bfqq_constantly_seeky(bfqq) &&
- bfqd->busy_in_flight_queues ==
- bfqd->const_seeky_busy_in_flight_queues;
-
- on_hdd_and_not_all_queues_seeky =
- !blk_queue_nonrot(bfqd->queue) && !all_queues_seeky;
-
- /*
- * To introduce the second case where idling needs to be
- * performed to preserve service guarantees, we can note that
- * allowing the drive to enqueue more than one request at a
- * time, and hence delegating de facto final scheduling
- * decisions to the drive's internal scheduler, causes loss of
- * control on the actual request service order. In particular,
- * the critical situation is when requests from different
- * processes happens to be present, at the same time, in the
- * internal queue(s) of the drive. In such a situation, the
- * drive, by deciding the service order of the
- * internally-queued requests, does determine also the actual
- * throughput distribution among these processes. But the
- * drive typically has no notion or concern about per-process
- * throughput distribution, and makes its decisions only on a
- * per-request basis. Therefore, the service distribution
- * enforced by the drive's internal scheduler is likely to
- * coincide with the desired device-throughput distribution
- * only in a completely symmetric scenario where:
+ * To introduce this case, we can note that allowing the drive
+ * to enqueue more than one request at a time, and hence
+ * delegating de facto final scheduling decisions to the
+ * drive's internal scheduler, entails loss of control on the
+ * actual request service order. In particular, the critical
+ * situation is when requests from different processes happen
+ * to be present, at the same time, in the internal queue(s)
+ * of the drive. In such a situation, the drive, by deciding
+ * the service order of the internally-queued requests, does
+ * determine also the actual throughput distribution among
+ * these processes. But the drive typically has no notion or
+ * concern about per-process throughput distribution, and
+ * makes its decisions only on a per-request basis. Therefore,
+ * the service distribution enforced by the drive's internal
+ * scheduler is likely to coincide with the desired
+ * device-throughput distribution only in a completely
+ * symmetric scenario where:
* (i) each of these processes must get the same throughput as
* the others;
* (ii) all these processes have the same I/O pattern
@@ -2555,26 +3334,53 @@ static bool bfq_bfqq_may_idle(struct bfq_queue *bfqq)
* words, only if sub-condition (i) holds, then idling is
* allowed, and the device tends to be prevented from queueing
* many requests, possibly of several processes. The reason
- * for not controlling also sub-condition (ii) is that, first,
- * in the case of an HDD, the asymmetry in terms of types of
- * I/O patterns is already taken in to account in the above
- * sentinel variable
- * on_hdd_and_not_all_queues_seeky. Secondly, in the case of a
- * flash-based device, we prefer however to privilege
- * throughput (and idling lowers throughput for this type of
- * devices), for the following reasons:
- * 1) differently from HDDs, the service time of random
- * requests is not orders of magnitudes lower than the service
- * time of sequential requests; thus, even if processes doing
- * sequential I/O get a preferential treatment with respect to
- * others doing random I/O, the consequences are not as
- * dramatic as with HDDs;
- * 2) if a process doing random I/O does need strong
- * throughput guarantees, it is hopefully already being
- * weight-raised, or the user is likely to have assigned it a
- * higher weight than the other processes (and thus
- * sub-condition (i) is likely to be false, which triggers
- * idling).
+ * for not controlling also sub-condition (ii) is that we
+ * exploit preemption to preserve guarantees in case of
+ * symmetric scenarios, even if (ii) does not hold, as
+ * explained in the next two paragraphs.
+ *
+ * Even if a queue, say Q, is expired when it remains idle, Q
+ * can still preempt the new in-service queue if the next
+ * request of Q arrives soon (see the comments on
+ * bfq_bfqq_update_budg_for_activation). If all queues and
+ * groups have the same weight, this form of preemption,
+ * combined with the hole-recovery heuristic described in the
+ * comments on function bfq_bfqq_update_budg_for_activation,
+ * are enough to preserve a correct bandwidth distribution in
+ * the mid term, even without idling. In fact, even if not
+ * idling allows the internal queues of the device to contain
+ * many requests, and thus to reorder requests, we can rather
+ * safely assume that the internal scheduler still preserves a
+ * minimum of mid-term fairness. The motivation for using
+ * preemption instead of idling is that, by not idling,
+ * service guarantees are preserved without minimally
+ * sacrificing throughput. In other words, both a high
+ * throughput and its desired distribution are obtained.
+ *
+ * More precisely, this preemption-based, idleless approach
+ * provides fairness in terms of IOPS, and not sectors per
+ * second. This can be seen with a simple example. Suppose
+ * that there are two queues with the same weight, but that
+ * the first queue receives requests of 8 sectors, while the
+ * second queue receives requests of 1024 sectors. In
+ * addition, suppose that each of the two queues contains at
+ * most one request at a time, which implies that each queue
+ * always remains idle after it is served. Finally, after
+ * remaining idle, each queue receives very quickly a new
+ * request. It follows that the two queues are served
+ * alternatively, preempting each other if needed. This
+ * implies that, although both queues have the same weight,
+ * the queue with large requests receives a service that is
+ * 1024/8 times as high as the service received by the other
+ * queue.
+ *
+ * On the other hand, device idling is performed, and thus
+ * pure sector-domain guarantees are provided, for the
+ * following queues, which are likely to need stronger
+ * throughput guarantees: weight-raised queues, and queues
+ * with a higher weight than other queues. When such queues
+ * are active, sub-condition (i) is false, which triggers
+ * device idling.
*
* According to the above considerations, the next variable is
* true (only) if sub-condition (i) holds. To compute the
@@ -2582,7 +3388,7 @@ static bool bfq_bfqq_may_idle(struct bfq_queue *bfqq)
* the function bfq_symmetric_scenario(), but also check
* whether bfqq is being weight-raised, because
* bfq_symmetric_scenario() does not take into account also
- * weight-raised queues (see comments to
+ * weight-raised queues (see comments on
* bfq_weights_tree_add()).
*
* As a side note, it is worth considering that the above
@@ -2604,17 +3410,16 @@ static bool bfq_bfqq_may_idle(struct bfq_queue *bfqq)
* bfqq. Such a case is when bfqq became active in a burst of
* queue activations. Queues that became active during a large
* burst benefit only from throughput, as discussed in the
- * comments to bfq_handle_burst. Thus, if bfqq became active
+ * comments on bfq_handle_burst. Thus, if bfqq became active
* in a burst and not idling the device maximizes throughput,
* then the device must no be idled, because not idling the
* device provides bfqq and all other queues in the burst with
- * maximum benefit. Combining this and the two cases above, we
- * can now establish when idling is actually needed to
- * preserve service guarantees.
+ * maximum benefit. Combining this and the above case, we can
+ * now establish when idling is actually needed to preserve
+ * service guarantees.
*/
idling_needed_for_service_guarantees =
- (on_hdd_and_not_all_queues_seeky || asymmetric_scenario) &&
- !bfq_bfqq_in_large_burst(bfqq);
+ asymmetric_scenario && !bfq_bfqq_in_large_burst(bfqq);
/*
* We have now all the components we need to compute the return
@@ -2624,6 +3429,16 @@ static bool bfq_bfqq_may_idle(struct bfq_queue *bfqq)
* 2) idling either boosts the throughput (without issues), or
* is necessary to preserve service guarantees.
*/
+ bfq_log_bfqq(bfqd, bfqq, "may_idle: sync %d idling_boosts_thr %d",
+ bfq_bfqq_sync(bfqq), idling_boosts_thr);
+
+ bfq_log_bfqq(bfqd, bfqq,
+ "may_idle: wr_busy %d boosts %d IO-bound %d guar %d",
+ bfqd->wr_busy_queues,
+ idling_boosts_thr_without_issues,
+ bfq_bfqq_IO_bound(bfqq),
+ idling_needed_for_service_guarantees);
+
return bfq_bfqq_sync(bfqq) &&
(idling_boosts_thr_without_issues ||
idling_needed_for_service_guarantees);
@@ -2635,7 +3450,7 @@ static bool bfq_bfqq_may_idle(struct bfq_queue *bfqq)
* 1) the queue must remain in service and cannot be expired, and
* 2) the device must be idled to wait for the possible arrival of a new
* request for the queue.
- * See the comments to the function bfq_bfqq_may_idle for the reasons
+ * See the comments on the function bfq_bfqq_may_idle for the reasons
* why performing device idling is the best choice to boost the throughput
* and preserve service guarantees when bfq_bfqq_may_idle itself
* returns true.
@@ -2665,7 +3480,7 @@ static struct bfq_queue *bfq_select_queue(struct bfq_data *bfqd)
bfq_log_bfqq(bfqd, bfqq, "select_queue: already in-service queue");
if (bfq_may_expire_for_budg_timeout(bfqq) &&
- !timer_pending(&bfqd->idle_slice_timer) &&
+ !hrtimer_active(&bfqd->idle_slice_timer) &&
!bfq_bfqq_must_idle(bfqq))
goto expire;
@@ -2685,7 +3500,8 @@ static struct bfq_queue *bfq_select_queue(struct bfq_data *bfqd)
* not disable disk idling even when a new request
* arrives.
*/
- if (timer_pending(&bfqd->idle_slice_timer)) {
+ if (bfq_bfqq_wait_request(bfqq)) {
+ BUG_ON(!hrtimer_active(&bfqd->idle_slice_timer));
/*
* If we get here: 1) at least a new request
* has arrived but we have not disabled the
@@ -2700,10 +3516,8 @@ static struct bfq_queue *bfq_select_queue(struct bfq_data *bfqd)
* So we disable idling.
*/
bfq_clear_bfqq_wait_request(bfqq);
- del_timer(&bfqd->idle_slice_timer);
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ hrtimer_try_to_cancel(&bfqd->idle_slice_timer);
bfqg_stats_update_idle_time(bfqq_group(bfqq));
-#endif
}
goto keep_queue;
}
@@ -2714,7 +3528,7 @@ static struct bfq_queue *bfq_select_queue(struct bfq_data *bfqd)
* for a new request, or has requests waiting for a completion and
* may idle after their completion, then keep it anyway.
*/
- if (timer_pending(&bfqd->idle_slice_timer) ||
+ if (hrtimer_active(&bfqd->idle_slice_timer) ||
(bfqq->dispatched != 0 && bfq_bfqq_may_idle(bfqq))) {
bfqq = NULL;
goto keep_queue;
@@ -2736,6 +3550,9 @@ static void bfq_update_wr_data(struct bfq_data *bfqd, struct bfq_queue *bfqq)
struct bfq_entity *entity = &bfqq->entity;
if (bfqq->wr_coeff > 1) { /* queue is being weight-raised */
+ BUG_ON(bfqq->wr_cur_max_time == bfqd->bfq_wr_rt_max_time &&
+ time_is_after_jiffies(bfqq->last_wr_start_finish));
+
bfq_log_bfqq(bfqd, bfqq,
"raising period dur %u/%u msec, old coeff %u, w %d(%d)",
jiffies_to_msecs(jiffies - bfqq->last_wr_start_finish),
@@ -2749,22 +3566,30 @@ static void bfq_update_wr_data(struct bfq_data *bfqd, struct bfq_queue *bfqq)
bfq_log_bfqq(bfqd, bfqq, "WARN: pending prio change");
/*
- * If the queue was activated in a burst, or
- * too much time has elapsed from the beginning
- * of this weight-raising period, or the queue has
- * exceeded the acceptable number of cooperations,
- * then end weight raising.
+ * If the queue was activated in a burst, or too much
+ * time has elapsed from the beginning of this
+ * weight-raising period, then end weight raising.
*/
- if (bfq_bfqq_in_large_burst(bfqq) ||
- bfq_bfqq_cooperations(bfqq) >= bfqd->bfq_coop_thresh ||
- time_is_before_jiffies(bfqq->last_wr_start_finish +
- bfqq->wr_cur_max_time)) {
- bfqq->last_wr_start_finish = jiffies;
- bfq_log_bfqq(bfqd, bfqq,
- "wrais ending at %lu, rais_max_time %u",
- bfqq->last_wr_start_finish,
- jiffies_to_msecs(bfqq->wr_cur_max_time));
+ if (bfq_bfqq_in_large_burst(bfqq))
bfq_bfqq_end_wr(bfqq);
+ else if (time_is_before_jiffies(bfqq->last_wr_start_finish +
+ bfqq->wr_cur_max_time)) {
+ if (bfqq->wr_cur_max_time != bfqd->bfq_wr_rt_max_time ||
+ time_is_before_jiffies(bfqq->wr_start_at_switch_to_srt +
+ bfq_wr_duration(bfqd)))
+ bfq_bfqq_end_wr(bfqq);
+ else {
+ /* switch back to interactive wr */
+ bfqq->wr_coeff = bfqd->bfq_wr_coeff;
+ bfqq->wr_cur_max_time = bfq_wr_duration(bfqd);
+ bfqq->last_wr_start_finish =
+ bfqq->wr_start_at_switch_to_srt;
+ BUG_ON(time_is_after_jiffies(
+ bfqq->last_wr_start_finish));
+ bfqq->entity.prio_changed = 1;
+ bfq_log_bfqq(bfqd, bfqq,
+ "back to interactive wr");
+ }
}
}
/* Update weight both if it must be raised and if it must be lowered */
@@ -2815,13 +3640,29 @@ static int bfq_dispatch_request(struct bfq_data *bfqd,
*/
if (!bfqd->rq_in_driver)
bfq_schedule_dispatch(bfqd);
+ BUG_ON(bfqq->entity.budget < bfqq->entity.service);
goto expire;
}
+ BUG_ON(bfqq->entity.budget < bfqq->entity.service);
/* Finally, insert request into driver dispatch list. */
bfq_bfqq_served(bfqq, service_to_charge);
+
+ BUG_ON(bfqq->entity.budget < bfqq->entity.service);
+
bfq_dispatch_insert(bfqd->queue, rq);
+ /*
+ * If weight raising has to terminate for bfqq, then next
+ * function causes an immediate update of bfqq's weight,
+ * without waiting for next activation. As a consequence, on
+ * expiration, bfqq will be timestamped as if has never been
+ * weight-raised during this service slot, even if it has
+ * received part or even most of the service as a
+ * weight-raised queue. This inflates bfqq's timestamps, which
+ * is beneficial, as bfqq is then more willing to leave the
+ * device immediately to possible other weight-raised queues.
+ */
bfq_update_wr_data(bfqd, bfqq);
bfq_log_bfqq(bfqd, bfqq,
@@ -2837,9 +3678,7 @@ static int bfq_dispatch_request(struct bfq_data *bfqd,
bfqd->in_service_bic = RQ_BIC(rq);
}
- if (bfqd->busy_queues > 1 && ((!bfq_bfqq_sync(bfqq) &&
- dispatched >= bfqd->bfq_max_budget_async_rq) ||
- bfq_class_idle(bfqq)))
+ if (bfqd->busy_queues > 1 && bfq_class_idle(bfqq))
goto expire;
return dispatched;
@@ -2885,8 +3724,8 @@ static int bfq_forced_dispatch(struct bfq_data *bfqd)
st = bfq_entity_service_tree(&bfqq->entity);
dispatched += __bfq_forced_dispatch_bfqq(bfqq);
- bfqq->max_budget = bfq_max_budget(bfqd);
+ bfqq->max_budget = bfq_max_budget(bfqd);
bfq_forget_idle(st);
}
@@ -2899,37 +3738,37 @@ static int bfq_dispatch_requests(struct request_queue *q, int force)
{
struct bfq_data *bfqd = q->elevator->elevator_data;
struct bfq_queue *bfqq;
- int max_dispatch;
bfq_log(bfqd, "dispatch requests: %d busy queues", bfqd->busy_queues);
+
if (bfqd->busy_queues == 0)
return 0;
if (unlikely(force))
return bfq_forced_dispatch(bfqd);
+ /*
+ * Force device to serve one request at a time if
+ * strict_guarantees is true. Forcing this service scheme is
+ * currently the ONLY way to guarantee that the request
+ * service order enforced by the scheduler is respected by a
+ * queueing device. Otherwise the device is free even to make
+ * some unlucky request wait for as long as the device
+ * wishes.
+ *
+ * Of course, serving one request at at time may cause loss of
+ * throughput.
+ */
+ if (bfqd->strict_guarantees && bfqd->rq_in_driver > 0)
+ return 0;
+
bfqq = bfq_select_queue(bfqd);
if (!bfqq)
return 0;
- if (bfq_class_idle(bfqq))
- max_dispatch = 1;
-
- if (!bfq_bfqq_sync(bfqq))
- max_dispatch = bfqd->bfq_max_budget_async_rq;
-
- if (!bfq_bfqq_sync(bfqq) && bfqq->dispatched >= max_dispatch) {
- if (bfqd->busy_queues > 1)
- return 0;
- if (bfqq->dispatched >= 4 * max_dispatch)
- return 0;
- }
-
- if (bfqd->sync_flight != 0 && !bfq_bfqq_sync(bfqq))
- return 0;
+ BUG_ON(bfqq->entity.budget < bfqq->entity.service);
- bfq_clear_bfqq_wait_request(bfqq);
- BUG_ON(timer_pending(&bfqd->idle_slice_timer));
+ BUG_ON(bfq_bfqq_wait_request(bfqq));
if (!bfq_dispatch_request(bfqd, bfqq))
return 0;
@@ -2937,6 +3776,8 @@ static int bfq_dispatch_requests(struct request_queue *q, int force)
bfq_log_bfqq(bfqd, bfqq, "dispatched %s request",
bfq_bfqq_sync(bfqq) ? "sync" : "async");
+ BUG_ON(bfqq->next_rq == NULL &&
+ bfqq->entity.budget < bfqq->entity.service);
return 1;
}
@@ -2948,23 +3789,22 @@ static int bfq_dispatch_requests(struct request_queue *q, int force)
*/
static void bfq_put_queue(struct bfq_queue *bfqq)
{
- struct bfq_data *bfqd = bfqq->bfqd;
#ifdef CONFIG_BFQ_GROUP_IOSCHED
struct bfq_group *bfqg = bfqq_group(bfqq);
#endif
- BUG_ON(atomic_read(&bfqq->ref) <= 0);
+ BUG_ON(bfqq->ref <= 0);
- bfq_log_bfqq(bfqd, bfqq, "put_queue: %p %d", bfqq,
- atomic_read(&bfqq->ref));
- if (!atomic_dec_and_test(&bfqq->ref))
+ bfq_log_bfqq(bfqq->bfqd, bfqq, "put_queue: %p %d", bfqq, bfqq->ref);
+ bfqq->ref--;
+ if (bfqq->ref)
return;
BUG_ON(rb_first(&bfqq->sort_list));
BUG_ON(bfqq->allocated[READ] + bfqq->allocated[WRITE] != 0);
BUG_ON(bfqq->entity.tree);
BUG_ON(bfq_bfqq_busy(bfqq));
- BUG_ON(bfqd->in_service_queue == bfqq);
+ BUG_ON(bfqq->bfqd->in_service_queue == bfqq);
if (bfq_bfqq_sync(bfqq))
/*
@@ -2977,7 +3817,7 @@ static void bfq_put_queue(struct bfq_queue *bfqq)
*/
hlist_del_init(&bfqq->burst_list_node);
- bfq_log_bfqq(bfqd, bfqq, "put_queue: %p freed", bfqq);
+ bfq_log_bfqq(bfqq->bfqd, bfqq, "put_queue: %p freed", bfqq);
kmem_cache_free(bfq_pool, bfqq);
#ifdef CONFIG_BFQ_GROUP_IOSCHED
@@ -3011,8 +3851,7 @@ static void bfq_exit_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq)
bfq_schedule_dispatch(bfqd);
}
- bfq_log_bfqq(bfqd, bfqq, "exit_bfqq: %p, %d", bfqq,
- atomic_read(&bfqq->ref));
+ bfq_log_bfqq(bfqd, bfqq, "exit_bfqq: %p, %d", bfqq, bfqq->ref);
bfq_put_cooperator(bfqq);
@@ -3021,28 +3860,7 @@ static void bfq_exit_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq)
static void bfq_init_icq(struct io_cq *icq)
{
- struct bfq_io_cq *bic = icq_to_bic(icq);
-
- bic->ttime.last_end_request = jiffies;
- /*
- * A newly created bic indicates that the process has just
- * started doing I/O, and is probably mapping into memory its
- * executable and libraries: it definitely needs weight raising.
- * There is however the possibility that the process performs,
- * for a while, I/O close to some other process. EQM intercepts
- * this behavior and may merge the queue corresponding to the
- * process with some other queue, BEFORE the weight of the queue
- * is raised. Merged queues are not weight-raised (they are assumed
- * to belong to processes that benefit only from high throughput).
- * If the merge is basically the consequence of an accident, then
- * the queue will be split soon and will get back its old weight.
- * It is then important to write down somewhere that this queue
- * does need weight raising, even if it did not make it to get its
- * weight raised before being merged. To this purpose, we overload
- * the field raising_time_left and assign 1 to it, to mark the queue
- * as needing weight raising.
- */
- bic->wr_time_left = 1;
+ icq_to_bic(icq)->ttime.last_end_request = ktime_get_ns() - (1ULL<<32);
}
static void bfq_exit_icq(struct io_cq *icq)
@@ -3050,21 +3868,21 @@ static void bfq_exit_icq(struct io_cq *icq)
struct bfq_io_cq *bic = icq_to_bic(icq);
struct bfq_data *bfqd = bic_to_bfqd(bic);
- if (bic->bfqq[BLK_RW_ASYNC]) {
- bfq_exit_bfqq(bfqd, bic->bfqq[BLK_RW_ASYNC]);
- bic->bfqq[BLK_RW_ASYNC] = NULL;
+ if (bic_to_bfqq(bic, false)) {
+ bfq_exit_bfqq(bfqd, bic_to_bfqq(bic, false));
+ bic_set_bfqq(bic, NULL, false);
}
- if (bic->bfqq[BLK_RW_SYNC]) {
+ if (bic_to_bfqq(bic, true)) {
/*
* If the bic is using a shared queue, put the reference
* taken on the io_context when the bic started using a
* shared bfq_queue.
*/
- if (bfq_bfqq_coop(bic->bfqq[BLK_RW_SYNC]))
+ if (bfq_bfqq_coop(bic_to_bfqq(bic, true)))
put_io_context(icq->ioc);
- bfq_exit_bfqq(bfqd, bic->bfqq[BLK_RW_SYNC]);
- bic->bfqq[BLK_RW_SYNC] = NULL;
+ bfq_exit_bfqq(bfqd, bic_to_bfqq(bic, true));
+ bic_set_bfqq(bic, NULL, true);
}
}
@@ -3072,8 +3890,8 @@ static void bfq_exit_icq(struct io_cq *icq)
* Update the entity prio values; note that the new values will not
* be used until the next (re)activation.
*/
-static void
-bfq_set_next_ioprio_data(struct bfq_queue *bfqq, struct bfq_io_cq *bic)
+static void bfq_set_next_ioprio_data(struct bfq_queue *bfqq,
+ struct bfq_io_cq *bic)
{
struct task_struct *tsk = current;
int ioprio_class;
@@ -3105,7 +3923,7 @@ bfq_set_next_ioprio_data(struct bfq_queue *bfqq, struct bfq_io_cq *bic)
break;
}
- if (bfqq->new_ioprio < 0 || bfqq->new_ioprio >= IOPRIO_BE_NR) {
+ if (bfqq->new_ioprio >= IOPRIO_BE_NR) {
pr_crit("bfq_set_next_ioprio_data: new_ioprio %d\n",
bfqq->new_ioprio);
BUG();
@@ -3113,45 +3931,40 @@ bfq_set_next_ioprio_data(struct bfq_queue *bfqq, struct bfq_io_cq *bic)
bfqq->entity.new_weight = bfq_ioprio_to_weight(bfqq->new_ioprio);
bfqq->entity.prio_changed = 1;
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "set_next_ioprio_data: bic_class %d prio %d class %d",
+ ioprio_class, bfqq->new_ioprio, bfqq->new_ioprio_class);
}
static void bfq_check_ioprio_change(struct bfq_io_cq *bic, struct bio *bio)
{
- struct bfq_data *bfqd;
- struct bfq_queue *bfqq, *new_bfqq;
+ struct bfq_data *bfqd = bic_to_bfqd(bic);
+ struct bfq_queue *bfqq;
unsigned long uninitialized_var(flags);
int ioprio = bic->icq.ioc->ioprio;
- bfqd = bfq_get_bfqd_locked(&(bic->icq.q->elevator->elevator_data),
- &flags);
/*
* This condition may trigger on a newly created bic, be sure to
* drop the lock before returning.
*/
if (unlikely(!bfqd) || likely(bic->ioprio == ioprio))
- goto out;
+ return;
bic->ioprio = ioprio;
- bfqq = bic->bfqq[BLK_RW_ASYNC];
+ bfqq = bic_to_bfqq(bic, false);
if (bfqq) {
- new_bfqq = bfq_get_queue(bfqd, bio, BLK_RW_ASYNC, bic,
- GFP_ATOMIC);
- if (new_bfqq) {
- bic->bfqq[BLK_RW_ASYNC] = new_bfqq;
- bfq_log_bfqq(bfqd, bfqq,
- "check_ioprio_change: bfqq %p %d",
- bfqq, atomic_read(&bfqq->ref));
- bfq_put_queue(bfqq);
- }
+ bfq_put_queue(bfqq);
+ bfqq = bfq_get_queue(bfqd, bio, BLK_RW_ASYNC, bic);
+ bic_set_bfqq(bic, bfqq, false);
+ bfq_log_bfqq(bfqd, bfqq,
+ "check_ioprio_change: bfqq %p %d",
+ bfqq, bfqq->ref);
}
- bfqq = bic->bfqq[BLK_RW_SYNC];
+ bfqq = bic_to_bfqq(bic, true);
if (bfqq)
bfq_set_next_ioprio_data(bfqq, bic);
-
-out:
- bfq_put_bfqd_unlock(bfqd, &flags);
}
static void bfq_init_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
@@ -3160,8 +3973,9 @@ static void bfq_init_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
RB_CLEAR_NODE(&bfqq->entity.rb_node);
INIT_LIST_HEAD(&bfqq->fifo);
INIT_HLIST_NODE(&bfqq->burst_list_node);
+ BUG_ON(!hlist_unhashed(&bfqq->burst_list_node));
- atomic_set(&bfqq->ref, 0);
+ bfqq->ref = 0;
bfqq->bfqd = bfqd;
if (bic)
@@ -3171,6 +3985,7 @@ static void bfq_init_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
if (!bfq_class_idle(bfqq))
bfq_mark_bfqq_idle_window(bfqq);
bfq_mark_bfqq_sync(bfqq);
+ bfq_mark_bfqq_just_created(bfqq);
} else
bfq_clear_bfqq_sync(bfqq);
bfq_mark_bfqq_IO_bound(bfqq);
@@ -3180,72 +3995,19 @@ static void bfq_init_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
bfqq->pid = pid;
bfqq->wr_coeff = 1;
- bfqq->last_wr_start_finish = 0;
+ bfqq->last_wr_start_finish = jiffies;
+ bfqq->wr_start_at_switch_to_srt = bfq_smallest_from_now();
+ bfqq->budget_timeout = bfq_smallest_from_now();
+ bfqq->split_time = bfq_smallest_from_now();
+
/*
* Set to the value for which bfqq will not be deemed as
* soft rt when it becomes backlogged.
*/
- bfqq->soft_rt_next_start = bfq_infinity_from_now(jiffies);
-}
-
-static struct bfq_queue *bfq_find_alloc_queue(struct bfq_data *bfqd,
- struct bio *bio, int is_sync,
- struct bfq_io_cq *bic,
- gfp_t gfp_mask)
-{
- struct bfq_group *bfqg;
- struct bfq_queue *bfqq, *new_bfqq = NULL;
- struct blkcg *blkcg;
-
-retry:
- rcu_read_lock();
-
- blkcg = bio_blkcg(bio);
- bfqg = bfq_find_alloc_group(bfqd, blkcg);
- /* bic always exists here */
- bfqq = bic_to_bfqq(bic, is_sync);
-
- /*
- * Always try a new alloc if we fall back to the OOM bfqq
- * originally, since it should just be a temporary situation.
- */
- if (!bfqq || bfqq == &bfqd->oom_bfqq) {
- bfqq = NULL;
- if (new_bfqq) {
- bfqq = new_bfqq;
- new_bfqq = NULL;
- } else if (gfpflags_allow_blocking(gfp_mask)) {
- rcu_read_unlock();
- spin_unlock_irq(bfqd->queue->queue_lock);
- new_bfqq = kmem_cache_alloc_node(bfq_pool,
- gfp_mask | __GFP_ZERO,
- bfqd->queue->node);
- spin_lock_irq(bfqd->queue->queue_lock);
- if (new_bfqq)
- goto retry;
- } else {
- bfqq = kmem_cache_alloc_node(bfq_pool,
- gfp_mask | __GFP_ZERO,
- bfqd->queue->node);
- }
-
- if (bfqq) {
- bfq_init_bfqq(bfqd, bfqq, bic, current->pid,
- is_sync);
- bfq_init_entity(&bfqq->entity, bfqg);
- bfq_log_bfqq(bfqd, bfqq, "allocated");
- } else {
- bfqq = &bfqd->oom_bfqq;
- bfq_log_bfqq(bfqd, bfqq, "using oom bfqq");
- }
- }
-
- if (new_bfqq)
- kmem_cache_free(bfq_pool, new_bfqq);
-
- rcu_read_unlock();
+ bfqq->soft_rt_next_start = bfq_greatest_from_now();
- return bfqq;
+ /* first request is almost certainly seeky */
+ bfqq->seek_history = 1;
}
static struct bfq_queue **bfq_async_queue_prio(struct bfq_data *bfqd,
@@ -3268,90 +4030,84 @@ static struct bfq_queue **bfq_async_queue_prio(struct bfq_data *bfqd,
}
static struct bfq_queue *bfq_get_queue(struct bfq_data *bfqd,
- struct bio *bio, int is_sync,
- struct bfq_io_cq *bic, gfp_t gfp_mask)
+ struct bio *bio, bool is_sync,
+ struct bfq_io_cq *bic)
{
const int ioprio = IOPRIO_PRIO_DATA(bic->ioprio);
const int ioprio_class = IOPRIO_PRIO_CLASS(bic->ioprio);
struct bfq_queue **async_bfqq = NULL;
- struct bfq_queue *bfqq = NULL;
+ struct bfq_queue *bfqq;
+ struct bfq_group *bfqg;
- if (!is_sync) {
- struct blkcg *blkcg;
- struct bfq_group *bfqg;
+ rcu_read_lock();
+
+ bfqg = bfq_find_set_group(bfqd, bio_blkcg(bio));
+ if (!bfqg) {
+ bfqq = &bfqd->oom_bfqq;
+ goto out;
+ }
- rcu_read_lock();
- blkcg = bio_blkcg(bio);
- rcu_read_unlock();
- bfqg = bfq_find_alloc_group(bfqd, blkcg);
+ if (!is_sync) {
async_bfqq = bfq_async_queue_prio(bfqd, bfqg, ioprio_class,
ioprio);
bfqq = *async_bfqq;
+ if (bfqq)
+ goto out;
}
- if (!bfqq)
- bfqq = bfq_find_alloc_queue(bfqd, bio, is_sync, bic, gfp_mask);
+ bfqq = kmem_cache_alloc_node(bfq_pool, GFP_NOWAIT | __GFP_ZERO,
+ bfqd->queue->node);
+
+ if (bfqq) {
+ bfq_init_bfqq(bfqd, bfqq, bic, current->pid,
+ is_sync);
+ bfq_init_entity(&bfqq->entity, bfqg);
+ bfq_log_bfqq(bfqd, bfqq, "allocated");
+ } else {
+ bfqq = &bfqd->oom_bfqq;
+ bfq_log_bfqq(bfqd, bfqq, "using oom bfqq");
+ goto out;
+ }
/*
* Pin the queue now that it's allocated, scheduler exit will
* prune it.
*/
- if (!is_sync && !(*async_bfqq)) {
- atomic_inc(&bfqq->ref);
+ if (async_bfqq) {
+ bfqq->ref++;
bfq_log_bfqq(bfqd, bfqq, "get_queue, bfqq not in async: %p, %d",
- bfqq, atomic_read(&bfqq->ref));
+ bfqq, bfqq->ref);
*async_bfqq = bfqq;
}
- atomic_inc(&bfqq->ref);
- bfq_log_bfqq(bfqd, bfqq, "get_queue, at end: %p, %d", bfqq,
- atomic_read(&bfqq->ref));
+out:
+ bfqq->ref++;
+ bfq_log_bfqq(bfqd, bfqq, "get_queue, at end: %p, %d", bfqq, bfqq->ref);
+ rcu_read_unlock();
return bfqq;
}
static void bfq_update_io_thinktime(struct bfq_data *bfqd,
struct bfq_io_cq *bic)
{
- unsigned long elapsed = jiffies - bic->ttime.last_end_request;
- unsigned long ttime = min(elapsed, 2UL * bfqd->bfq_slice_idle);
+ struct bfq_ttime *ttime = &bic->ttime;
+ u64 elapsed = ktime_get_ns() - bic->ttime.last_end_request;
+
+ elapsed = min_t(u64, elapsed, 2 * bfqd->bfq_slice_idle);
- bic->ttime.ttime_samples = (7*bic->ttime.ttime_samples + 256) / 8;
- bic->ttime.ttime_total = (7*bic->ttime.ttime_total + 256*ttime) / 8;
- bic->ttime.ttime_mean = (bic->ttime.ttime_total + 128) /
- bic->ttime.ttime_samples;
+ ttime->ttime_samples = (7*bic->ttime.ttime_samples + 256) / 8;
+ ttime->ttime_total = div_u64(7*ttime->ttime_total + 256*elapsed, 8);
+ ttime->ttime_mean = div64_ul(ttime->ttime_total + 128,
+ ttime->ttime_samples);
}
-static void bfq_update_io_seektime(struct bfq_data *bfqd,
- struct bfq_queue *bfqq,
- struct request *rq)
+static void
+bfq_update_io_seektime(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+ struct request *rq)
{
- sector_t sdist;
- u64 total;
-
- if (bfqq->last_request_pos < blk_rq_pos(rq))
- sdist = blk_rq_pos(rq) - bfqq->last_request_pos;
- else
- sdist = bfqq->last_request_pos - blk_rq_pos(rq);
-
- /*
- * Don't allow the seek distance to get too large from the
- * odd fragment, pagein, etc.
- */
- if (bfqq->seek_samples == 0) /* first request, not really a seek */
- sdist = 0;
- else if (bfqq->seek_samples <= 60) /* second & third seek */
- sdist = min(sdist, (bfqq->seek_mean * 4) + 2*1024*1024);
- else
- sdist = min(sdist, (bfqq->seek_mean * 4) + 2*1024*64);
-
- bfqq->seek_samples = (7*bfqq->seek_samples + 256) / 8;
- bfqq->seek_total = (7*bfqq->seek_total + (u64)256*sdist) / 8;
- total = bfqq->seek_total + (bfqq->seek_samples/2);
- do_div(total, bfqq->seek_samples);
- bfqq->seek_mean = (sector_t)total;
-
- bfq_log_bfqq(bfqd, bfqq, "dist=%llu mean=%llu", (u64)sdist,
- (u64)bfqq->seek_mean);
+ bfqq->seek_history <<= 1;
+ bfqq->seek_history |=
+ get_sdist(bfqq->last_request_pos, rq) > BFQQ_SEEK_THR;
}
/*
@@ -3369,7 +4125,8 @@ static void bfq_update_idle_window(struct bfq_data *bfqd,
return;
/* Idle window just restored, statistics are meaningless. */
- if (bfq_bfqq_just_split(bfqq))
+ if (time_is_after_eq_jiffies(bfqq->split_time +
+ bfqd->bfq_wr_min_idle_time))
return;
enable_idle = bfq_bfqq_idle_window(bfqq);
@@ -3409,22 +4166,13 @@ static void bfq_rq_enqueued(struct bfq_data *bfqd, struct bfq_queue *bfqq,
bfq_update_io_thinktime(bfqd, bic);
bfq_update_io_seektime(bfqd, bfqq, rq);
- if (!BFQQ_SEEKY(bfqq) && bfq_bfqq_constantly_seeky(bfqq)) {
- bfq_clear_bfqq_constantly_seeky(bfqq);
- if (!blk_queue_nonrot(bfqd->queue)) {
- BUG_ON(!bfqd->const_seeky_busy_in_flight_queues);
- bfqd->const_seeky_busy_in_flight_queues--;
- }
- }
if (bfqq->entity.service > bfq_max_budget(bfqd) / 8 ||
!BFQQ_SEEKY(bfqq))
bfq_update_idle_window(bfqd, bfqq, bic);
- bfq_clear_bfqq_just_split(bfqq);
bfq_log_bfqq(bfqd, bfqq,
- "rq_enqueued: idle_window=%d (seeky %d, mean %llu)",
- bfq_bfqq_idle_window(bfqq), BFQQ_SEEKY(bfqq),
- (unsigned long long) bfqq->seek_mean);
+ "rq_enqueued: idle_window=%d (seeky %d)",
+ bfq_bfqq_idle_window(bfqq), BFQQ_SEEKY(bfqq));
bfqq->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
@@ -3438,14 +4186,15 @@ static void bfq_rq_enqueued(struct bfq_data *bfqd, struct bfq_queue *bfqq,
* is small and the queue is not to be expired, then
* just exit.
*
- * In this way, if the disk is being idled to wait for
- * a new request from the in-service queue, we avoid
- * unplugging the device and committing the disk to serve
- * just a small request. On the contrary, we wait for
- * the block layer to decide when to unplug the device:
- * hopefully, new requests will be merged to this one
- * quickly, then the device will be unplugged and
- * larger requests will be dispatched.
+ * In this way, if the device is being idled to wait
+ * for a new request from the in-service queue, we
+ * avoid unplugging the device and committing the
+ * device to serve just a small request. On the
+ * contrary, we wait for the block layer to decide
+ * when to unplug the device: hopefully, new requests
+ * will be merged to this one quickly, then the device
+ * will be unplugged and larger requests will be
+ * dispatched.
*/
if (small_req && !budget_timeout)
return;
@@ -3457,10 +4206,8 @@ static void bfq_rq_enqueued(struct bfq_data *bfqd, struct bfq_queue *bfqq,
* timer.
*/
bfq_clear_bfqq_wait_request(bfqq);
- del_timer(&bfqd->idle_slice_timer);
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ hrtimer_try_to_cancel(&bfqd->idle_slice_timer);
bfqg_stats_update_idle_time(bfqq_group(bfqq));
-#endif
/*
* The queue is not empty, because a new request just
@@ -3504,28 +4251,21 @@ static void bfq_insert_request(struct request_queue *q, struct request *rq)
*/
new_bfqq->allocated[rq_data_dir(rq)]++;
bfqq->allocated[rq_data_dir(rq)]--;
- atomic_inc(&new_bfqq->ref);
+ new_bfqq->ref++;
+ bfq_clear_bfqq_just_created(bfqq);
bfq_put_queue(bfqq);
if (bic_to_bfqq(RQ_BIC(rq), 1) == bfqq)
bfq_merge_bfqqs(bfqd, RQ_BIC(rq),
bfqq, new_bfqq);
rq->elv.priv[1] = new_bfqq;
bfqq = new_bfqq;
- } else
- bfq_bfqq_increase_failed_cooperations(bfqq);
+ }
}
bfq_add_request(rq);
- /*
- * Here a newly-created bfq_queue has already started a weight-raising
- * period: clear raising_time_left to prevent bfq_bfqq_save_state()
- * from assigning it a full weight-raising period. See the detailed
- * comments about this field in bfq_init_icq().
- */
- if (bfqq->bic)
- bfqq->bic->wr_time_left = 0;
- rq->fifo_time = jiffies + bfqd->bfq_fifo_expire[rq_is_sync(rq)];
+ rq->fifo_time = ktime_get_ns() +
+ jiffies_to_nsecs(bfqd->bfq_fifo_expire[rq_is_sync(rq)]);
list_add_tail(&rq->queuelist, &bfqq->fifo);
bfq_rq_enqueued(bfqd, bfqq, rq);
@@ -3533,8 +4273,8 @@ static void bfq_insert_request(struct request_queue *q, struct request *rq)
static void bfq_update_hw_tag(struct bfq_data *bfqd)
{
- bfqd->max_rq_in_driver = max(bfqd->max_rq_in_driver,
- bfqd->rq_in_driver);
+ bfqd->max_rq_in_driver = max_t(int, bfqd->max_rq_in_driver,
+ bfqd->rq_in_driver);
if (bfqd->hw_tag == 1)
return;
@@ -3560,48 +4300,85 @@ static void bfq_completed_request(struct request_queue *q, struct request *rq)
{
struct bfq_queue *bfqq = RQ_BFQQ(rq);
struct bfq_data *bfqd = bfqq->bfqd;
- bool sync = bfq_bfqq_sync(bfqq);
+ u64 now_ns;
+ u32 delta_us;
- bfq_log_bfqq(bfqd, bfqq, "completed one req with %u sects left (%d)",
- blk_rq_sectors(rq), sync);
+ bfq_log_bfqq(bfqd, bfqq, "completed one req with %u sects left",
+ blk_rq_sectors(rq));
+ assert_spin_locked(bfqd->queue->queue_lock);
bfq_update_hw_tag(bfqd);
BUG_ON(!bfqd->rq_in_driver);
BUG_ON(!bfqq->dispatched);
bfqd->rq_in_driver--;
bfqq->dispatched--;
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
bfqg_stats_update_completion(bfqq_group(bfqq),
rq_start_time_ns(rq),
- rq_io_start_time_ns(rq), rq->cmd_flags);
-#endif
+ rq_io_start_time_ns(rq), req_op(rq),
+ rq->cmd_flags);
if (!bfqq->dispatched && !bfq_bfqq_busy(bfqq)) {
+ BUG_ON(!RB_EMPTY_ROOT(&bfqq->sort_list));
+ /*
+ * Set budget_timeout (which we overload to store the
+ * time at which the queue remains with no backlog and
+ * no outstanding request; used by the weight-raising
+ * mechanism).
+ */
+ bfqq->budget_timeout = jiffies;
+
bfq_weights_tree_remove(bfqd, &bfqq->entity,
&bfqd->queue_weights_tree);
- if (!blk_queue_nonrot(bfqd->queue)) {
- BUG_ON(!bfqd->busy_in_flight_queues);
- bfqd->busy_in_flight_queues--;
- if (bfq_bfqq_constantly_seeky(bfqq)) {
- BUG_ON(!bfqd->
- const_seeky_busy_in_flight_queues);
- bfqd->const_seeky_busy_in_flight_queues--;
- }
- }
}
- if (sync) {
- bfqd->sync_flight--;
- RQ_BIC(rq)->ttime.last_end_request = jiffies;
- }
+ now_ns = ktime_get_ns();
+
+ RQ_BIC(rq)->ttime.last_end_request = now_ns;
+
+ /*
+ * Using us instead of ns, to get a reasonable precision in
+ * computing rate in next check.
+ */
+ delta_us = div_u64(now_ns - bfqd->last_completion, NSEC_PER_USEC);
+
+ bfq_log(bfqd, "rq_completed: delta %uus/%luus max_size %u rate %llu/%llu",
+ delta_us, BFQ_MIN_TT/NSEC_PER_USEC, bfqd->last_rq_max_size,
+ (USEC_PER_SEC*
+ (u64)((bfqd->last_rq_max_size<<BFQ_RATE_SHIFT)/delta_us))
+ >>BFQ_RATE_SHIFT,
+ (USEC_PER_SEC*(u64)(1UL<<(BFQ_RATE_SHIFT-10)))>>BFQ_RATE_SHIFT);
+
+ /*
+ * If the request took rather long to complete, and, according
+ * to the maximum request size recorded, this completion latency
+ * implies that the request was certainly served at a very low
+ * rate (less than 1M sectors/sec), then the whole observation
+ * interval that lasts up to this time instant cannot be a
+ * valid time interval for computing a new peak rate. Invoke
+ * bfq_update_rate_reset to have the following three steps
+ * taken:
+ * - close the observation interval at the last (previous)
+ * request dispatch or completion
+ * - compute rate, if possible, for that observation interval
+ * - reset to zero samples, which will trigger a proper
+ * re-initialization of the observation interval on next
+ * dispatch
+ */
+ if (delta_us > BFQ_MIN_TT/NSEC_PER_USEC &&
+ (bfqd->last_rq_max_size<<BFQ_RATE_SHIFT)/delta_us <
+ 1UL<<(BFQ_RATE_SHIFT - 10))
+ bfq_update_rate_reset(bfqd, NULL);
+ bfqd->last_completion = now_ns;
/*
- * If we are waiting to discover whether the request pattern of the
- * task associated with the queue is actually isochronous, and
- * both requisites for this condition to hold are satisfied, then
- * compute soft_rt_next_start (see the comments to the function
- * bfq_bfqq_softrt_next_start()).
+ * If we are waiting to discover whether the request pattern
+ * of the task associated with the queue is actually
+ * isochronous, and both requisites for this condition to hold
+ * are now satisfied, then compute soft_rt_next_start (see the
+ * comments on the function bfq_bfqq_softrt_next_start()). We
+ * schedule this delayed check when bfqq expires, if it still
+ * has in-flight requests.
*/
if (bfq_bfqq_softrt_update(bfqq) && bfqq->dispatched == 0 &&
RB_EMPTY_ROOT(&bfqq->sort_list))
@@ -3613,10 +4390,7 @@ static void bfq_completed_request(struct request_queue *q, struct request *rq)
* or if we want to idle in case it has no pending requests.
*/
if (bfqd->in_service_queue == bfqq) {
- if (bfq_bfqq_budget_new(bfqq))
- bfq_set_budget_timeout(bfqd);
-
- if (bfq_bfqq_must_idle(bfqq)) {
+ if (bfqq->dispatched == 0 && bfq_bfqq_must_idle(bfqq)) {
bfq_arm_slice_timer(bfqd);
goto out;
} else if (bfq_may_expire_for_budg_timeout(bfqq))
@@ -3646,7 +4420,7 @@ static int __bfq_may_queue(struct bfq_queue *bfqq)
return ELV_MQUEUE_MAY;
}
-static int bfq_may_queue(struct request_queue *q, int rw)
+static int bfq_may_queue(struct request_queue *q, int op, int op_flags)
{
struct bfq_data *bfqd = q->elevator->elevator_data;
struct task_struct *tsk = current;
@@ -3663,7 +4437,7 @@ static int bfq_may_queue(struct request_queue *q, int rw)
if (!bic)
return ELV_MQUEUE_MAY;
- bfqq = bic_to_bfqq(bic, rw_is_sync(rw));
+ bfqq = bic_to_bfqq(bic, rw_is_sync(op, op_flags));
if (bfqq)
return __bfq_may_queue(bfqq);
@@ -3687,14 +4461,14 @@ static void bfq_put_request(struct request *rq)
rq->elv.priv[1] = NULL;
bfq_log_bfqq(bfqq->bfqd, bfqq, "put_request %p, %d",
- bfqq, atomic_read(&bfqq->ref));
+ bfqq, bfqq->ref);
bfq_put_queue(bfqq);
}
}
/*
* Returns NULL if a new bfqq should be allocated, or the old bfqq if this
- * was the last process referring to said bfqq.
+ * was the last process referring to that bfqq.
*/
static struct bfq_queue *
bfq_split_bfqq(struct bfq_io_cq *bic, struct bfq_queue *bfqq)
@@ -3732,11 +4506,8 @@ static int bfq_set_request(struct request_queue *q, struct request *rq,
unsigned long flags;
bool split = false;
- might_sleep_if(gfpflags_allow_blocking(gfp_mask));
-
- bfq_check_ioprio_change(bic, bio);
-
spin_lock_irqsave(q->queue_lock, flags);
+ bfq_check_ioprio_change(bic, bio);
if (!bic)
goto queue_fail;
@@ -3746,23 +4517,47 @@ static int bfq_set_request(struct request_queue *q, struct request *rq,
new_queue:
bfqq = bic_to_bfqq(bic, is_sync);
if (!bfqq || bfqq == &bfqd->oom_bfqq) {
- bfqq = bfq_get_queue(bfqd, bio, is_sync, bic, gfp_mask);
+ if (bfqq)
+ bfq_put_queue(bfqq);
+ bfqq = bfq_get_queue(bfqd, bio, is_sync, bic);
+ BUG_ON(!hlist_unhashed(&bfqq->burst_list_node));
+
bic_set_bfqq(bic, bfqq, is_sync);
if (split && is_sync) {
+ bfq_log_bfqq(bfqd, bfqq,
+ "set_request: was_in_list %d "
+ "was_in_large_burst %d "
+ "large burst in progress %d",
+ bic->was_in_burst_list,
+ bic->saved_in_large_burst,
+ bfqd->large_burst);
+
if ((bic->was_in_burst_list && bfqd->large_burst) ||
- bic->saved_in_large_burst)
+ bic->saved_in_large_burst) {
+ bfq_log_bfqq(bfqd, bfqq,
+ "set_request: marking in "
+ "large burst");
bfq_mark_bfqq_in_large_burst(bfqq);
- else {
+ } else {
+ bfq_log_bfqq(bfqd, bfqq,
+ "set_request: clearing in "
+ "large burst");
bfq_clear_bfqq_in_large_burst(bfqq);
if (bic->was_in_burst_list)
hlist_add_head(&bfqq->burst_list_node,
&bfqd->burst_list);
}
+ bfqq->split_time = jiffies;
}
} else {
/* If the queue was seeky for too long, break it apart. */
if (bfq_bfqq_coop(bfqq) && bfq_bfqq_split_coop(bfqq)) {
bfq_log_bfqq(bfqd, bfqq, "breaking apart bfqq");
+
+ /* Update bic before losing reference to bfqq */
+ if (bfq_bfqq_in_large_burst(bfqq))
+ bic->saved_in_large_burst = true;
+
bfqq = bfq_split_bfqq(bic, bfqq);
split = true;
if (!bfqq)
@@ -3771,9 +4566,8 @@ new_queue:
}
bfqq->allocated[rw]++;
- atomic_inc(&bfqq->ref);
- bfq_log_bfqq(bfqd, bfqq, "set_request: bfqq %p, %d", bfqq,
- atomic_read(&bfqq->ref));
+ bfqq->ref++;
+ bfq_log_bfqq(bfqd, bfqq, "set_request: bfqq %p, %d", bfqq, bfqq->ref);
rq->elv.priv[0] = bic;
rq->elv.priv[1] = bfqq;
@@ -3788,7 +4582,6 @@ new_queue:
if (likely(bfqq != &bfqd->oom_bfqq) && bfqq_process_refs(bfqq) == 1) {
bfqq->bic = bic;
if (split) {
- bfq_mark_bfqq_just_split(bfqq);
/*
* If the queue has just been split from a shared
* queue, restore the idle window and the possible
@@ -3798,6 +4591,9 @@ new_queue:
}
}
+ if (unlikely(bfq_bfqq_just_created(bfqq)))
+ bfq_handle_burst(bfqd, bfqq);
+
spin_unlock_irqrestore(q->queue_lock, flags);
return 0;
@@ -3824,9 +4620,10 @@ static void bfq_kick_queue(struct work_struct *work)
* Handler of the expiration of the timer running if the in-service queue
* is idling inside its time slice.
*/
-static void bfq_idle_slice_timer(unsigned long data)
+static enum hrtimer_restart bfq_idle_slice_timer(struct hrtimer *timer)
{
- struct bfq_data *bfqd = (struct bfq_data *)data;
+ struct bfq_data *bfqd = container_of(timer, struct bfq_data,
+ idle_slice_timer);
struct bfq_queue *bfqq;
unsigned long flags;
enum bfqq_expiration reason;
@@ -3844,6 +4641,8 @@ static void bfq_idle_slice_timer(unsigned long data)
*/
if (bfqq) {
bfq_log_bfqq(bfqd, bfqq, "slice_timer expired");
+ bfq_clear_bfqq_wait_request(bfqq);
+
if (bfq_bfqq_budget_timeout(bfqq))
/*
* Also here the queue can be safely expired
@@ -3869,14 +4668,16 @@ schedule_dispatch:
bfq_schedule_dispatch(bfqd);
spin_unlock_irqrestore(bfqd->queue->queue_lock, flags);
+ return HRTIMER_NORESTART;
}
static void bfq_shutdown_timer_wq(struct bfq_data *bfqd)
{
- del_timer_sync(&bfqd->idle_slice_timer);
+ hrtimer_cancel(&bfqd->idle_slice_timer);
cancel_work_sync(&bfqd->unplug_work);
}
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
static void __bfq_put_async_bfqq(struct bfq_data *bfqd,
struct bfq_queue **bfqq_ptr)
{
@@ -3885,9 +4686,9 @@ static void __bfq_put_async_bfqq(struct bfq_data *bfqd,
bfq_log(bfqd, "put_async_bfqq: %p", bfqq);
if (bfqq) {
- bfq_bfqq_move(bfqd, bfqq, &bfqq->entity, root_group);
+ bfq_bfqq_move(bfqd, bfqq, root_group);
bfq_log_bfqq(bfqd, bfqq, "put_async_bfqq: putting %p, %d",
- bfqq, atomic_read(&bfqq->ref));
+ bfqq, bfqq->ref);
bfq_put_queue(bfqq);
*bfqq_ptr = NULL;
}
@@ -3909,6 +4710,7 @@ static void bfq_put_async_queues(struct bfq_data *bfqd, struct bfq_group *bfqg)
__bfq_put_async_bfqq(bfqd, &bfqg->async_idle_bfqq);
}
+#endif
static void bfq_exit_queue(struct elevator_queue *e)
{
@@ -3928,9 +4730,7 @@ static void bfq_exit_queue(struct elevator_queue *e)
bfq_shutdown_timer_wq(bfqd);
- synchronize_rcu();
-
- BUG_ON(timer_pending(&bfqd->idle_slice_timer));
+ BUG_ON(hrtimer_active(&bfqd->idle_slice_timer));
#ifdef CONFIG_BFQ_GROUP_IOSCHED
blkcg_deactivate_policy(q, &blkcg_policy_bfq);
@@ -3978,11 +4778,14 @@ static int bfq_init_queue(struct request_queue *q, struct elevator_type *e)
* will not attempt to free it.
*/
bfq_init_bfqq(bfqd, &bfqd->oom_bfqq, NULL, 1, 0);
- atomic_inc(&bfqd->oom_bfqq.ref);
+ bfqd->oom_bfqq.ref++;
bfqd->oom_bfqq.new_ioprio = BFQ_DEFAULT_QUEUE_IOPRIO;
bfqd->oom_bfqq.new_ioprio_class = IOPRIO_CLASS_BE;
bfqd->oom_bfqq.entity.new_weight =
bfq_ioprio_to_weight(bfqd->oom_bfqq.new_ioprio);
+
+ /* oom_bfqq does not participate to bursts */
+ bfq_clear_bfqq_just_created(&bfqd->oom_bfqq);
/*
* Trigger weight initialization, according to ioprio, at the
* oom_bfqq's first activation. The oom_bfqq's ioprio and ioprio
@@ -4001,13 +4804,10 @@ static int bfq_init_queue(struct request_queue *q, struct elevator_type *e)
goto out_free;
bfq_init_root_group(bfqd->root_group, bfqd);
bfq_init_entity(&bfqd->oom_bfqq.entity, bfqd->root_group);
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
- bfqd->active_numerous_groups = 0;
-#endif
- init_timer(&bfqd->idle_slice_timer);
+ hrtimer_init(&bfqd->idle_slice_timer, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
bfqd->idle_slice_timer.function = bfq_idle_slice_timer;
- bfqd->idle_slice_timer.data = (unsigned long)bfqd;
bfqd->queue_weights_tree = RB_ROOT;
bfqd->group_weights_tree = RB_ROOT;
@@ -4028,20 +4828,19 @@ static int bfq_init_queue(struct request_queue *q, struct elevator_type *e)
bfqd->bfq_back_penalty = bfq_back_penalty;
bfqd->bfq_slice_idle = bfq_slice_idle;
bfqd->bfq_class_idle_last_service = 0;
- bfqd->bfq_max_budget_async_rq = bfq_max_budget_async_rq;
- bfqd->bfq_timeout[BLK_RW_ASYNC] = bfq_timeout_async;
- bfqd->bfq_timeout[BLK_RW_SYNC] = bfq_timeout_sync;
+ bfqd->bfq_timeout = bfq_timeout;
- bfqd->bfq_coop_thresh = 2;
- bfqd->bfq_failed_cooperations = 7000;
bfqd->bfq_requests_within_timer = 120;
- bfqd->bfq_large_burst_thresh = 11;
- bfqd->bfq_burst_interval = msecs_to_jiffies(500);
+ bfqd->bfq_large_burst_thresh = 8;
+ bfqd->bfq_burst_interval = msecs_to_jiffies(180);
bfqd->low_latency = true;
- bfqd->bfq_wr_coeff = 20;
+ /*
+ * Trade-off between responsiveness and fairness.
+ */
+ bfqd->bfq_wr_coeff = 30;
bfqd->bfq_wr_rt_max_time = msecs_to_jiffies(300);
bfqd->bfq_wr_max_time = 0;
bfqd->bfq_wr_min_idle_time = msecs_to_jiffies(2000);
@@ -4053,16 +4852,15 @@ static int bfq_init_queue(struct request_queue *q, struct elevator_type *e)
* video.
*/
bfqd->wr_busy_queues = 0;
- bfqd->busy_in_flight_queues = 0;
- bfqd->const_seeky_busy_in_flight_queues = 0;
/*
- * Begin by assuming, optimistically, that the device peak rate is
- * equal to the highest reference rate.
+ * Begin by assuming, optimistically, that the device is a
+ * high-speed one, and that its peak rate is equal to 2/3 of
+ * the highest reference rate.
*/
bfqd->RT_prod = R_fast[blk_queue_nonrot(bfqd->queue)] *
T_fast[blk_queue_nonrot(bfqd->queue)];
- bfqd->peak_rate = R_fast[blk_queue_nonrot(bfqd->queue)];
+ bfqd->peak_rate = R_fast[blk_queue_nonrot(bfqd->queue)] * 2 / 3;
bfqd->device_speed = BFQ_BFQD_FAST;
return 0;
@@ -4088,7 +4886,7 @@ static int __init bfq_slab_setup(void)
static ssize_t bfq_var_show(unsigned int var, char *page)
{
- return sprintf(page, "%d\n", var);
+ return sprintf(page, "%u\n", var);
}
static ssize_t bfq_var_store(unsigned long *var, const char *page,
@@ -4159,21 +4957,21 @@ static ssize_t bfq_weights_show(struct elevator_queue *e, char *page)
static ssize_t __FUNC(struct elevator_queue *e, char *page) \
{ \
struct bfq_data *bfqd = e->elevator_data; \
- unsigned int __data = __VAR; \
- if (__CONV) \
+ u64 __data = __VAR; \
+ if (__CONV == 1) \
__data = jiffies_to_msecs(__data); \
+ else if (__CONV == 2) \
+ __data = div_u64(__data, NSEC_PER_MSEC); \
return bfq_var_show(__data, (page)); \
}
-SHOW_FUNCTION(bfq_fifo_expire_sync_show, bfqd->bfq_fifo_expire[1], 1);
-SHOW_FUNCTION(bfq_fifo_expire_async_show, bfqd->bfq_fifo_expire[0], 1);
+SHOW_FUNCTION(bfq_fifo_expire_sync_show, bfqd->bfq_fifo_expire[1], 2);
+SHOW_FUNCTION(bfq_fifo_expire_async_show, bfqd->bfq_fifo_expire[0], 2);
SHOW_FUNCTION(bfq_back_seek_max_show, bfqd->bfq_back_max, 0);
SHOW_FUNCTION(bfq_back_seek_penalty_show, bfqd->bfq_back_penalty, 0);
-SHOW_FUNCTION(bfq_slice_idle_show, bfqd->bfq_slice_idle, 1);
+SHOW_FUNCTION(bfq_slice_idle_show, bfqd->bfq_slice_idle, 2);
SHOW_FUNCTION(bfq_max_budget_show, bfqd->bfq_user_max_budget, 0);
-SHOW_FUNCTION(bfq_max_budget_async_rq_show,
- bfqd->bfq_max_budget_async_rq, 0);
-SHOW_FUNCTION(bfq_timeout_sync_show, bfqd->bfq_timeout[BLK_RW_SYNC], 1);
-SHOW_FUNCTION(bfq_timeout_async_show, bfqd->bfq_timeout[BLK_RW_ASYNC], 1);
+SHOW_FUNCTION(bfq_timeout_sync_show, bfqd->bfq_timeout, 1);
+SHOW_FUNCTION(bfq_strict_guarantees_show, bfqd->strict_guarantees, 0);
SHOW_FUNCTION(bfq_low_latency_show, bfqd->low_latency, 0);
SHOW_FUNCTION(bfq_wr_coeff_show, bfqd->bfq_wr_coeff, 0);
SHOW_FUNCTION(bfq_wr_rt_max_time_show, bfqd->bfq_wr_rt_max_time, 1);
@@ -4183,6 +4981,17 @@ SHOW_FUNCTION(bfq_wr_min_inter_arr_async_show, bfqd->bfq_wr_min_inter_arr_async,
SHOW_FUNCTION(bfq_wr_max_softrt_rate_show, bfqd->bfq_wr_max_softrt_rate, 0);
#undef SHOW_FUNCTION
+#define USEC_SHOW_FUNCTION(__FUNC, __VAR) \
+static ssize_t __FUNC(struct elevator_queue *e, char *page) \
+{ \
+ struct bfq_data *bfqd = e->elevator_data; \
+ u64 __data = __VAR; \
+ __data = div_u64(__data, NSEC_PER_USEC); \
+ return bfq_var_show(__data, (page)); \
+}
+USEC_SHOW_FUNCTION(bfq_slice_idle_us_show, bfqd->bfq_slice_idle);
+#undef USEC_SHOW_FUNCTION
+
#define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, __CONV) \
static ssize_t \
__FUNC(struct elevator_queue *e, const char *page, size_t count) \
@@ -4194,24 +5003,22 @@ __FUNC(struct elevator_queue *e, const char *page, size_t count) \
__data = (MIN); \
else if (__data > (MAX)) \
__data = (MAX); \
- if (__CONV) \
+ if (__CONV == 1) \
*(__PTR) = msecs_to_jiffies(__data); \
+ else if (__CONV == 2) \
+ *(__PTR) = (u64)__data * NSEC_PER_MSEC; \
else \
*(__PTR) = __data; \
return ret; \
}
STORE_FUNCTION(bfq_fifo_expire_sync_store, &bfqd->bfq_fifo_expire[1], 1,
- INT_MAX, 1);
+ INT_MAX, 2);
STORE_FUNCTION(bfq_fifo_expire_async_store, &bfqd->bfq_fifo_expire[0], 1,
- INT_MAX, 1);
+ INT_MAX, 2);
STORE_FUNCTION(bfq_back_seek_max_store, &bfqd->bfq_back_max, 0, INT_MAX, 0);
STORE_FUNCTION(bfq_back_seek_penalty_store, &bfqd->bfq_back_penalty, 1,
INT_MAX, 0);
-STORE_FUNCTION(bfq_slice_idle_store, &bfqd->bfq_slice_idle, 0, INT_MAX, 1);
-STORE_FUNCTION(bfq_max_budget_async_rq_store, &bfqd->bfq_max_budget_async_rq,
- 1, INT_MAX, 0);
-STORE_FUNCTION(bfq_timeout_async_store, &bfqd->bfq_timeout[BLK_RW_ASYNC], 0,
- INT_MAX, 1);
+STORE_FUNCTION(bfq_slice_idle_store, &bfqd->bfq_slice_idle, 0, INT_MAX, 2);
STORE_FUNCTION(bfq_wr_coeff_store, &bfqd->bfq_wr_coeff, 1, INT_MAX, 0);
STORE_FUNCTION(bfq_wr_max_time_store, &bfqd->bfq_wr_max_time, 0, INT_MAX, 1);
STORE_FUNCTION(bfq_wr_rt_max_time_store, &bfqd->bfq_wr_rt_max_time, 0, INT_MAX,
@@ -4224,6 +5031,23 @@ STORE_FUNCTION(bfq_wr_max_softrt_rate_store, &bfqd->bfq_wr_max_softrt_rate, 0,
INT_MAX, 0);
#undef STORE_FUNCTION
+#define USEC_STORE_FUNCTION(__FUNC, __PTR, MIN, MAX) \
+static ssize_t __FUNC(struct elevator_queue *e, const char *page, size_t count)\
+{ \
+ struct bfq_data *bfqd = e->elevator_data; \
+ unsigned long __data; \
+ int ret = bfq_var_store(&__data, (page), count); \
+ if (__data < (MIN)) \
+ __data = (MIN); \
+ else if (__data > (MAX)) \
+ __data = (MAX); \
+ *(__PTR) = (u64)__data * NSEC_PER_USEC; \
+ return ret; \
+}
+USEC_STORE_FUNCTION(bfq_slice_idle_us_store, &bfqd->bfq_slice_idle, 0,
+ UINT_MAX);
+#undef USEC_STORE_FUNCTION
+
/* do nothing for the moment */
static ssize_t bfq_weights_store(struct elevator_queue *e,
const char *page, size_t count)
@@ -4231,16 +5055,6 @@ static ssize_t bfq_weights_store(struct elevator_queue *e,
return count;
}
-static unsigned long bfq_estimated_max_budget(struct bfq_data *bfqd)
-{
- u64 timeout = jiffies_to_msecs(bfqd->bfq_timeout[BLK_RW_SYNC]);
-
- if (bfqd->peak_rate_samples >= BFQ_PEAK_RATE_SAMPLES)
- return bfq_calc_max_budget(bfqd->peak_rate, timeout);
- else
- return bfq_default_max_budget;
-}
-
static ssize_t bfq_max_budget_store(struct elevator_queue *e,
const char *page, size_t count)
{
@@ -4249,7 +5063,7 @@ static ssize_t bfq_max_budget_store(struct elevator_queue *e,
int ret = bfq_var_store(&__data, (page), count);
if (__data == 0)
- bfqd->bfq_max_budget = bfq_estimated_max_budget(bfqd);
+ bfqd->bfq_max_budget = bfq_calc_max_budget(bfqd);
else {
if (__data > INT_MAX)
__data = INT_MAX;
@@ -4261,6 +5075,10 @@ static ssize_t bfq_max_budget_store(struct elevator_queue *e,
return ret;
}
+/*
+ * Leaving this name to preserve name compatibility with cfq
+ * parameters, but this timeout is used for both sync and async.
+ */
static ssize_t bfq_timeout_sync_store(struct elevator_queue *e,
const char *page, size_t count)
{
@@ -4273,9 +5091,27 @@ static ssize_t bfq_timeout_sync_store(struct elevator_queue *e,
else if (__data > INT_MAX)
__data = INT_MAX;
- bfqd->bfq_timeout[BLK_RW_SYNC] = msecs_to_jiffies(__data);
+ bfqd->bfq_timeout = msecs_to_jiffies(__data);
if (bfqd->bfq_user_max_budget == 0)
- bfqd->bfq_max_budget = bfq_estimated_max_budget(bfqd);
+ bfqd->bfq_max_budget = bfq_calc_max_budget(bfqd);
+
+ return ret;
+}
+
+static ssize_t bfq_strict_guarantees_store(struct elevator_queue *e,
+ const char *page, size_t count)
+{
+ struct bfq_data *bfqd = e->elevator_data;
+ unsigned long uninitialized_var(__data);
+ int ret = bfq_var_store(&__data, (page), count);
+
+ if (__data > 1)
+ __data = 1;
+ if (!bfqd->strict_guarantees && __data == 1
+ && bfqd->bfq_slice_idle < 8 * NSEC_PER_MSEC)
+ bfqd->bfq_slice_idle = 8 * NSEC_PER_MSEC;
+
+ bfqd->strict_guarantees = __data;
return ret;
}
@@ -4305,10 +5141,10 @@ static struct elv_fs_entry bfq_attrs[] = {
BFQ_ATTR(back_seek_max),
BFQ_ATTR(back_seek_penalty),
BFQ_ATTR(slice_idle),
+ BFQ_ATTR(slice_idle_us),
BFQ_ATTR(max_budget),
- BFQ_ATTR(max_budget_async_rq),
BFQ_ATTR(timeout_sync),
- BFQ_ATTR(timeout_async),
+ BFQ_ATTR(strict_guarantees),
BFQ_ATTR(low_latency),
BFQ_ATTR(wr_coeff),
BFQ_ATTR(wr_max_time),
@@ -4328,7 +5164,8 @@ static struct elevator_type iosched_bfq = {
#ifdef CONFIG_BFQ_GROUP_IOSCHED
.elevator_bio_merged_fn = bfq_bio_merged,
#endif
- .elevator_allow_merge_fn = bfq_allow_merge,
+ .elevator_allow_bio_merge_fn = bfq_allow_bio_merge,
+ .elevator_allow_rq_merge_fn = bfq_allow_rq_merge,
.elevator_dispatch_fn = bfq_dispatch_requests,
.elevator_add_req_fn = bfq_insert_request,
.elevator_activate_req_fn = bfq_activate_request,
@@ -4351,18 +5188,28 @@ static struct elevator_type iosched_bfq = {
.elevator_owner = THIS_MODULE,
};
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+static struct blkcg_policy blkcg_policy_bfq = {
+ .dfl_cftypes = bfq_blkg_files,
+ .legacy_cftypes = bfq_blkcg_legacy_files,
+
+ .cpd_alloc_fn = bfq_cpd_alloc,
+ .cpd_init_fn = bfq_cpd_init,
+ .cpd_bind_fn = bfq_cpd_init,
+ .cpd_free_fn = bfq_cpd_free,
+
+ .pd_alloc_fn = bfq_pd_alloc,
+ .pd_init_fn = bfq_pd_init,
+ .pd_offline_fn = bfq_pd_offline,
+ .pd_free_fn = bfq_pd_free,
+ .pd_reset_stats_fn = bfq_pd_reset_stats,
+};
+#endif
+
static int __init bfq_init(void)
{
int ret;
-
- /*
- * Can be 0 on HZ < 1000 setups.
- */
- if (bfq_slice_idle == 0)
- bfq_slice_idle = 1;
-
- if (bfq_timeout_async == 0)
- bfq_timeout_async = 1;
+ char msg[50] = "BFQ I/O-scheduler: v8r4";
#ifdef CONFIG_BFQ_GROUP_IOSCHED
ret = blkcg_policy_register(&blkcg_policy_bfq);
@@ -4375,27 +5222,46 @@ static int __init bfq_init(void)
goto err_pol_unreg;
/*
- * Times to load large popular applications for the typical systems
- * installed on the reference devices (see the comments before the
- * definitions of the two arrays).
+ * Times to load large popular applications for the typical
+ * systems installed on the reference devices (see the
+ * comments before the definitions of the next two
+ * arrays). Actually, we use slightly slower values, as the
+ * estimated peak rate tends to be smaller than the actual
+ * peak rate. The reason for this last fact is that estimates
+ * are computed over much shorter time intervals than the long
+ * intervals typically used for benchmarking. Why? First, to
+ * adapt more quickly to variations. Second, because an I/O
+ * scheduler cannot rely on a peak-rate-evaluation workload to
+ * be run for a long time.
*/
- T_slow[0] = msecs_to_jiffies(2600);
- T_slow[1] = msecs_to_jiffies(1000);
- T_fast[0] = msecs_to_jiffies(5500);
- T_fast[1] = msecs_to_jiffies(2000);
+ T_slow[0] = msecs_to_jiffies(3500); /* actually 4 sec */
+ T_slow[1] = msecs_to_jiffies(1000); /* actually 1.5 sec */
+ T_fast[0] = msecs_to_jiffies(7000); /* actually 8 sec */
+ T_fast[1] = msecs_to_jiffies(2500); /* actually 3 sec */
/*
- * Thresholds that determine the switch between speed classes (see
- * the comments before the definition of the array).
+ * Thresholds that determine the switch between speed classes
+ * (see the comments before the definition of the array
+ * device_speed_thresh). These thresholds are biased towards
+ * transitions to the fast class. This is safer than the
+ * opposite bias. In fact, a wrong transition to the slow
+ * class results in short weight-raising periods, because the
+ * speed of the device then tends to be higher that the
+ * reference peak rate. On the opposite end, a wrong
+ * transition to the fast class tends to increase
+ * weight-raising periods, because of the opposite reason.
*/
- device_speed_thresh[0] = (R_fast[0] + R_slow[0]) / 2;
- device_speed_thresh[1] = (R_fast[1] + R_slow[1]) / 2;
+ device_speed_thresh[0] = (4 * R_slow[0]) / 3;
+ device_speed_thresh[1] = (4 * R_slow[1]) / 3;
ret = elv_register(&iosched_bfq);
if (ret)
goto err_pol_unreg;
- pr_info("BFQ I/O-scheduler: v7r11");
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ strcat(msg, " (with cgroups support)");
+#endif
+ pr_info("%s", msg);
return 0;
diff --git a/block/bfq-sched.c b/block/bfq-sched.c
index a5ed694..45d63d3 100644
--- a/block/bfq-sched.c
+++ b/block/bfq-sched.c
@@ -7,9 +7,13 @@
* Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
* Paolo Valente <paolo.valente@unimore.it>
*
- * Copyright (C) 2010 Paolo Valente <paolo.valente@unimore.it>
+ * Copyright (C) 2015 Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2016 Paolo Valente <paolo.valente@linaro.org>
*/
+static struct bfq_group *bfqq_group(struct bfq_queue *bfqq);
+
#ifdef CONFIG_BFQ_GROUP_IOSCHED
#define for_each_entity(entity) \
for (; entity ; entity = entity->parent)
@@ -22,8 +26,6 @@ static struct bfq_entity *bfq_lookup_next_entity(struct bfq_sched_data *sd,
int extract,
struct bfq_data *bfqd);
-static struct bfq_group *bfqq_group(struct bfq_queue *bfqq);
-
static void bfq_update_budget(struct bfq_entity *next_in_service)
{
struct bfq_entity *bfqg_entity;
@@ -48,6 +50,7 @@ static void bfq_update_budget(struct bfq_entity *next_in_service)
static int bfq_update_next_in_service(struct bfq_sched_data *sd)
{
struct bfq_entity *next_in_service;
+ struct bfq_queue *bfqq;
if (sd->in_service_entity)
/* will update/requeue at the end of service */
@@ -65,14 +68,29 @@ static int bfq_update_next_in_service(struct bfq_sched_data *sd)
if (next_in_service)
bfq_update_budget(next_in_service);
+ else
+ goto exit;
+
+ bfqq = bfq_entity_to_bfqq(next_in_service);
+ if (bfqq)
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "update_next_in_service: chosen this queue");
+ else {
+ struct bfq_group *bfqg =
+ container_of(next_in_service,
+ struct bfq_group, entity);
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "update_next_in_service: chosen this entity");
+ }
+exit:
return 1;
}
static void bfq_check_next_in_service(struct bfq_sched_data *sd,
struct bfq_entity *entity)
{
- BUG_ON(sd->next_in_service != entity);
+ WARN_ON(sd->next_in_service != entity);
}
#else
#define for_each_entity(entity) \
@@ -151,20 +169,36 @@ static u64 bfq_delta(unsigned long service, unsigned long weight)
static void bfq_calc_finish(struct bfq_entity *entity, unsigned long service)
{
struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+ unsigned long long start, finish, delta;
BUG_ON(entity->weight == 0);
entity->finish = entity->start +
bfq_delta(service, entity->weight);
+ start = ((entity->start>>10)*1000)>>12;
+ finish = ((entity->finish>>10)*1000)>>12;
+ delta = ((bfq_delta(service, entity->weight)>>10)*1000)>>12;
+
if (bfqq) {
bfq_log_bfqq(bfqq->bfqd, bfqq,
"calc_finish: serv %lu, w %d",
service, entity->weight);
bfq_log_bfqq(bfqq->bfqd, bfqq,
"calc_finish: start %llu, finish %llu, delta %llu",
- entity->start, entity->finish,
- bfq_delta(service, entity->weight));
+ start, finish, delta);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ } else {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "calc_finish group: serv %lu, w %d",
+ service, entity->weight);
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "calc_finish group: start %llu, finish %llu, delta %llu",
+ start, finish, delta);
+#endif
}
}
@@ -293,10 +327,26 @@ static void bfq_update_min(struct bfq_entity *entity, struct rb_node *node)
static void bfq_update_active_node(struct rb_node *node)
{
struct bfq_entity *entity = rb_entry(node, struct bfq_entity, rb_node);
+ struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
entity->min_start = entity->start;
bfq_update_min(entity, node->rb_right);
bfq_update_min(entity, node->rb_left);
+
+ if (bfqq) {
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "update_active_node: new min_start %llu",
+ ((entity->min_start>>10)*1000)>>12);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ } else {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "update_active_node: new min_start %llu",
+ ((entity->min_start>>10)*1000)>>12);
+#endif
+ }
}
/**
@@ -386,8 +436,6 @@ static void bfq_active_insert(struct bfq_service_tree *st,
BUG_ON(!bfqg);
BUG_ON(!bfqd);
bfqg->active_entities++;
- if (bfqg->active_entities == 2)
- bfqd->active_numerous_groups++;
}
#endif
}
@@ -399,7 +447,7 @@ static void bfq_active_insert(struct bfq_service_tree *st,
static unsigned short bfq_ioprio_to_weight(int ioprio)
{
BUG_ON(ioprio < 0 || ioprio >= IOPRIO_BE_NR);
- return IOPRIO_BE_NR * BFQ_WEIGHT_CONVERSION_COEFF - ioprio;
+ return (IOPRIO_BE_NR - ioprio) * BFQ_WEIGHT_CONVERSION_COEFF;
}
/**
@@ -422,9 +470,9 @@ static void bfq_get_entity(struct bfq_entity *entity)
struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
if (bfqq) {
- atomic_inc(&bfqq->ref);
+ bfqq->ref++;
bfq_log_bfqq(bfqq->bfqd, bfqq, "get_entity: %p %d",
- bfqq, atomic_read(&bfqq->ref));
+ bfqq, bfqq->ref);
}
}
@@ -499,10 +547,6 @@ static void bfq_active_extract(struct bfq_service_tree *st,
BUG_ON(!bfqd);
BUG_ON(!bfqg->active_entities);
bfqg->active_entities--;
- if (bfqg->active_entities == 1) {
- BUG_ON(!bfqd->active_numerous_groups);
- bfqd->active_numerous_groups--;
- }
}
#endif
}
@@ -552,7 +596,7 @@ static void bfq_forget_entity(struct bfq_service_tree *st,
if (bfqq) {
sd = entity->sched_data;
bfq_log_bfqq(bfqq->bfqd, bfqq, "forget_entity: %p %d",
- bfqq, atomic_read(&bfqq->ref));
+ bfqq, bfqq->ref);
bfq_put_queue(bfqq);
}
}
@@ -602,7 +646,7 @@ __bfq_entity_update_weight_prio(struct bfq_service_tree *old_st,
if (entity->prio_changed) {
struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
- unsigned short prev_weight, new_weight;
+ unsigned int prev_weight, new_weight;
struct bfq_data *bfqd = NULL;
struct rb_root *root;
#ifdef CONFIG_BFQ_GROUP_IOSCHED
@@ -630,7 +674,10 @@ __bfq_entity_update_weight_prio(struct bfq_service_tree *old_st,
entity->new_weight > BFQ_MAX_WEIGHT) {
pr_crit("update_weight_prio: new_weight %d\n",
entity->new_weight);
- BUG();
+ if (entity->new_weight < BFQ_MIN_WEIGHT)
+ entity->new_weight = BFQ_MIN_WEIGHT;
+ else
+ entity->new_weight = BFQ_MAX_WEIGHT;
}
entity->orig_weight = entity->new_weight;
if (bfqq)
@@ -661,6 +708,13 @@ __bfq_entity_update_weight_prio(struct bfq_service_tree *old_st,
* associated with its new weight.
*/
if (prev_weight != new_weight) {
+ if (bfqq)
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "weight changed %d %d(%d %d)",
+ prev_weight, new_weight,
+ entity->orig_weight,
+ bfqq->wr_coeff);
+
root = bfqq ? &bfqd->queue_weights_tree :
&bfqd->group_weights_tree;
bfq_weights_tree_remove(bfqd, entity, root);
@@ -707,7 +761,7 @@ static void bfq_bfqq_served(struct bfq_queue *bfqq, int served)
st = bfq_entity_service_tree(entity);
entity->service += served;
- BUG_ON(entity->service > entity->budget);
+
BUG_ON(st->wsum == 0);
st->vtime += bfq_delta(served, st->wsum);
@@ -716,31 +770,69 @@ static void bfq_bfqq_served(struct bfq_queue *bfqq, int served)
#ifdef CONFIG_BFQ_GROUP_IOSCHED
bfqg_stats_set_start_empty_time(bfqq_group(bfqq));
#endif
- bfq_log_bfqq(bfqq->bfqd, bfqq, "bfqq_served %d secs", served);
+ st = bfq_entity_service_tree(&bfqq->entity);
+ bfq_log_bfqq(bfqq->bfqd, bfqq, "bfqq_served %d secs, vtime %llu on %p",
+ served, ((st->vtime>>10)*1000)>>12, st);
}
/**
- * bfq_bfqq_charge_full_budget - set the service to the entity budget.
+ * bfq_bfqq_charge_time - charge an amount of service equivalent to the length
+ * of the time interval during which bfqq has been in
+ * service.
+ * @bfqd: the device
* @bfqq: the queue that needs a service update.
+ * @time_ms: the amount of time during which the queue has received service
*
- * When it's not possible to be fair in the service domain, because
- * a queue is not consuming its budget fast enough (the meaning of
- * fast depends on the timeout parameter), we charge it a full
- * budget. In this way we should obtain a sort of time-domain
- * fairness among all the seeky/slow queues.
+ * If a queue does not consume its budget fast enough, then providing
+ * the queue with service fairness may impair throughput, more or less
+ * severely. For this reason, queues that consume their budget slowly
+ * are provided with time fairness instead of service fairness. This
+ * goal is achieved through the BFQ scheduling engine, even if such an
+ * engine works in the service, and not in the time domain. The trick
+ * is charging these queues with an inflated amount of service, equal
+ * to the amount of service that they would have received during their
+ * service slot if they had been fast, i.e., if their requests had
+ * been dispatched at a rate equal to the estimated peak rate.
+ *
+ * It is worth noting that time fairness can cause important
+ * distortions in terms of bandwidth distribution, on devices with
+ * internal queueing. The reason is that I/O requests dispatched
+ * during the service slot of a queue may be served after that service
+ * slot is finished, and may have a total processing time loosely
+ * correlated with the duration of the service slot. This is
+ * especially true for short service slots.
*/
-static void bfq_bfqq_charge_full_budget(struct bfq_queue *bfqq)
+static void bfq_bfqq_charge_time(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+ unsigned long time_ms)
{
struct bfq_entity *entity = &bfqq->entity;
+ int tot_serv_to_charge = entity->service;
+ unsigned int timeout_ms = jiffies_to_msecs(bfq_timeout);
+
+ if (time_ms > 0 && time_ms < timeout_ms)
+ tot_serv_to_charge =
+ (bfqd->bfq_max_budget * time_ms) / timeout_ms;
- bfq_log_bfqq(bfqq->bfqd, bfqq, "charge_full_budget");
+ if (tot_serv_to_charge < entity->service)
+ tot_serv_to_charge = entity->service;
- bfq_bfqq_served(bfqq, entity->budget - entity->service);
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "charge_time: %lu/%u ms, %d/%d/%d sectors",
+ time_ms, timeout_ms, entity->service,
+ tot_serv_to_charge, entity->budget);
+
+ /* Increase budget to avoid inconsistencies */
+ if (tot_serv_to_charge > entity->budget)
+ entity->budget = tot_serv_to_charge;
+
+ bfq_bfqq_served(bfqq,
+ max_t(int, 0, tot_serv_to_charge - entity->service));
}
/**
* __bfq_activate_entity - activate an entity.
* @entity: the entity being activated.
+ * @non_blocking_wait_rq: true if this entity was waiting for a request
*
* Called whenever an entity is activated, i.e., it is not active and one
* of its children receives a new request, or has to be reactivated due to
@@ -748,11 +840,16 @@ static void bfq_bfqq_charge_full_budget(struct bfq_queue *bfqq)
* service received if @entity is active) of the queue to calculate its
* timestamps.
*/
-static void __bfq_activate_entity(struct bfq_entity *entity)
+static void __bfq_activate_entity(struct bfq_entity *entity,
+ bool non_blocking_wait_rq)
{
struct bfq_sched_data *sd = entity->sched_data;
struct bfq_service_tree *st = bfq_entity_service_tree(entity);
+ struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+ bool backshifted = false;
+ BUG_ON(!sd);
+ BUG_ON(!st);
if (entity == sd->in_service_entity) {
BUG_ON(entity->tree);
/*
@@ -770,45 +867,133 @@ static void __bfq_activate_entity(struct bfq_entity *entity)
* old start time.
*/
bfq_active_extract(st, entity);
- } else if (entity->tree == &st->idle) {
- /*
- * Must be on the idle tree, bfq_idle_extract() will
- * check for that.
- */
- bfq_idle_extract(st, entity);
- entity->start = bfq_gt(st->vtime, entity->finish) ?
- st->vtime : entity->finish;
} else {
- /*
- * The finish time of the entity may be invalid, and
- * it is in the past for sure, otherwise the queue
- * would have been on the idle tree.
- */
- entity->start = st->vtime;
- st->wsum += entity->weight;
- bfq_get_entity(entity);
+ unsigned long long min_vstart;
+
+ /* See comments on bfq_fqq_update_budg_for_activation */
+ if (non_blocking_wait_rq && bfq_gt(st->vtime, entity->finish)) {
+ backshifted = true;
+ min_vstart = entity->finish;
+ } else
+ min_vstart = st->vtime;
+
+ if (entity->tree == &st->idle) {
+ /*
+ * Must be on the idle tree, bfq_idle_extract() will
+ * check for that.
+ */
+ bfq_idle_extract(st, entity);
+ entity->start = bfq_gt(min_vstart, entity->finish) ?
+ min_vstart : entity->finish;
+ } else {
+ /*
+ * The finish time of the entity may be invalid, and
+ * it is in the past for sure, otherwise the queue
+ * would have been on the idle tree.
+ */
+ entity->start = min_vstart;
+ st->wsum += entity->weight;
+ bfq_get_entity(entity);
- BUG_ON(entity->on_st);
- entity->on_st = 1;
+ BUG_ON(entity->on_st);
+ entity->on_st = 1;
+ }
}
st = __bfq_entity_update_weight_prio(st, entity);
bfq_calc_finish(entity, entity->budget);
+
+ /*
+ * If some queues enjoy backshifting for a while, then their
+ * (virtual) finish timestamps may happen to become lower and
+ * lower than the system virtual time. In particular, if
+ * these queues often happen to be idle for short time
+ * periods, and during such time periods other queues with
+ * higher timestamps happen to be busy, then the backshifted
+ * timestamps of the former queues can become much lower than
+ * the system virtual time. In fact, to serve the queues with
+ * higher timestamps while the ones with lower timestamps are
+ * idle, the system virtual time may be pushed-up to much
+ * higher values than the finish timestamps of the idle
+ * queues. As a consequence, the finish timestamps of all new
+ * or newly activated queues may end up being much larger than
+ * those of lucky queues with backshifted timestamps. The
+ * latter queues may then monopolize the device for a lot of
+ * time. This would simply break service guarantees.
+ *
+ * To reduce this problem, push up a little bit the
+ * backshifted timestamps of the queue associated with this
+ * entity (only a queue can happen to have the backshifted
+ * flag set): just enough to let the finish timestamp of the
+ * queue be equal to the current value of the system virtual
+ * time. This may introduce a little unfairness among queues
+ * with backshifted timestamps, but it does not break
+ * worst-case fairness guarantees.
+ *
+ * As a special case, if bfqq is weight-raised, push up
+ * timestamps much less, to keep very low the probability that
+ * this push up causes the backshifted finish timestamps of
+ * weight-raised queues to become higher than the backshifted
+ * finish timestamps of non weight-raised queues.
+ */
+ if (backshifted && bfq_gt(st->vtime, entity->finish)) {
+ unsigned long delta = st->vtime - entity->finish;
+
+ if (bfqq)
+ delta /= bfqq->wr_coeff;
+
+ entity->start += delta;
+ entity->finish += delta;
+
+ if (bfqq) {
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "__activate_entity: new queue finish %llu",
+ ((entity->finish>>10)*1000)>>12);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ } else {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "__activate_entity: new group finish %llu",
+ ((entity->finish>>10)*1000)>>12);
+#endif
+ }
+ }
+
bfq_active_insert(st, entity);
+
+ if (bfqq) {
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "__activate_entity: queue %seligible in st %p",
+ entity->start <= st->vtime ? "" : "non ", st);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ } else {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "__activate_entity: group %seligible in st %p",
+ entity->start <= st->vtime ? "" : "non ", st);
+#endif
+ }
}
/**
* bfq_activate_entity - activate an entity and its ancestors if necessary.
* @entity: the entity to activate.
+ * @non_blocking_wait_rq: true if this entity was waiting for a request
*
* Activate @entity and all the entities on the path from it to the root.
*/
-static void bfq_activate_entity(struct bfq_entity *entity)
+static void bfq_activate_entity(struct bfq_entity *entity,
+ bool non_blocking_wait_rq)
{
struct bfq_sched_data *sd;
for_each_entity(entity) {
- __bfq_activate_entity(entity);
+ BUG_ON(!entity);
+ __bfq_activate_entity(entity, non_blocking_wait_rq);
sd = entity->sched_data;
if (!bfq_update_next_in_service(sd))
@@ -889,23 +1074,24 @@ static void bfq_deactivate_entity(struct bfq_entity *entity, int requeue)
if (!__bfq_deactivate_entity(entity, requeue))
/*
- * The parent entity is still backlogged, and
- * we don't need to update it as it is still
- * in service.
+ * next_in_service has not been changed, so
+ * no upwards update is needed
*/
break;
if (sd->next_in_service)
/*
- * The parent entity is still backlogged and
- * the budgets on the path towards the root
- * need to be updated.
+ * The parent entity is still backlogged,
+ * because next_in_service is not NULL, and
+ * next_in_service has been updated (see
+ * comment on the body of the above if):
+ * upwards update of the schedule is needed.
*/
goto update;
/*
- * If we reach there the parent is no more backlogged and
- * we want to propagate the dequeue upwards.
+ * If we get here, then the parent is no more backlogged and
+ * we want to propagate the deactivation upwards.
*/
requeue = 1;
}
@@ -915,9 +1101,23 @@ static void bfq_deactivate_entity(struct bfq_entity *entity, int requeue)
update:
entity = parent;
for_each_entity(entity) {
- __bfq_activate_entity(entity);
+ struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+ __bfq_activate_entity(entity, false);
sd = entity->sched_data;
+ if (bfqq)
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "invoking udpdate_next for this queue");
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ else {
+ struct bfq_group *bfqg =
+ container_of(entity,
+ struct bfq_group, entity);
+
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "invoking udpdate_next for this entity");
+ }
+#endif
if (!bfq_update_next_in_service(sd))
break;
}
@@ -943,7 +1143,23 @@ static void bfq_update_vtime(struct bfq_service_tree *st)
entry = rb_entry(node, struct bfq_entity, rb_node);
if (bfq_gt(entry->min_start, st->vtime)) {
+ struct bfq_queue *bfqq = bfq_entity_to_bfqq(entry);
st->vtime = entry->min_start;
+
+ if (bfqq)
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "update_vtime: new vtime %llu %p",
+ ((st->vtime>>10)*1000)>>12, st);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ else {
+ struct bfq_group *bfqg =
+ container_of(entry, struct bfq_group, entity);
+
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "update_vtime: new vtime %llu %p",
+ ((st->vtime>>10)*1000)>>12, st);
+ }
+#endif
bfq_forget_idle(st);
}
}
@@ -996,10 +1212,11 @@ left:
* Update the virtual time in @st and return the first eligible entity
* it contains.
*/
-static struct bfq_entity *__bfq_lookup_next_entity(struct bfq_service_tree *st,
- bool force)
+static struct bfq_entity *
+__bfq_lookup_next_entity(struct bfq_service_tree *st, bool force)
{
struct bfq_entity *entity, *new_next_in_service = NULL;
+ struct bfq_queue *bfqq;
if (RB_EMPTY_ROOT(&st->active))
return NULL;
@@ -1008,6 +1225,24 @@ static struct bfq_entity *__bfq_lookup_next_entity(struct bfq_service_tree *st,
entity = bfq_first_active_entity(st);
BUG_ON(bfq_gt(entity->start, st->vtime));
+ bfqq = bfq_entity_to_bfqq(entity);
+ if (bfqq)
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "__lookup_next: start %llu vtime %llu st %p",
+ ((entity->start>>10)*1000)>>12,
+ ((st->vtime>>10)*1000)>>12, st);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ else {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "__lookup_next: start %llu vtime %llu st %p",
+ ((entity->start>>10)*1000)>>12,
+ ((st->vtime>>10)*1000)>>12, st);
+ }
+#endif
+
/*
* If the chosen entity does not match with the sched_data's
* next_in_service and we are forcedly serving the IDLE priority
@@ -1043,11 +1278,36 @@ static struct bfq_entity *bfq_lookup_next_entity(struct bfq_sched_data *sd,
BUG_ON(sd->in_service_entity);
+ /*
+ * Choose from idle class, if needed to guarantee a minimum
+ * bandwidth to this class. This should also mitigate
+ * priority-inversion problems in case a low priority task is
+ * holding file system resources.
+ */
if (bfqd &&
- jiffies - bfqd->bfq_class_idle_last_service > BFQ_CL_IDLE_TIMEOUT) {
+ jiffies - bfqd->bfq_class_idle_last_service >
+ BFQ_CL_IDLE_TIMEOUT) {
entity = __bfq_lookup_next_entity(st + BFQ_IOPRIO_CLASSES - 1,
true);
if (entity) {
+ struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+
+ if (bfqq)
+ bfq_log_bfqq(bfqd, bfqq,
+ "idle chosen from st %p %d",
+ st + BFQ_IOPRIO_CLASSES - 1,
+ BFQ_IOPRIO_CLASSES - 1);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ else {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg(bfqd, bfqg,
+ "idle chosen from st %p %d",
+ st + BFQ_IOPRIO_CLASSES - 1,
+ BFQ_IOPRIO_CLASSES - 1);
+ }
+#endif
i = BFQ_IOPRIO_CLASSES - 1;
bfqd->bfq_class_idle_last_service = jiffies;
sd->next_in_service = entity;
@@ -1056,6 +1316,25 @@ static struct bfq_entity *bfq_lookup_next_entity(struct bfq_sched_data *sd,
for (; i < BFQ_IOPRIO_CLASSES; i++) {
entity = __bfq_lookup_next_entity(st + i, false);
if (entity) {
+ if (bfqd != NULL) {
+ struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
+
+ if (bfqq)
+ bfq_log_bfqq(bfqd, bfqq,
+ "chosen from st %p %d",
+ st + i, i);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ else {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg(bfqd, bfqg,
+ "chosen from st %p %d",
+ st + i, i);
+ }
+#endif
+ }
+
if (extract) {
bfq_check_next_in_service(sd, entity);
bfq_active_extract(st + i, entity);
@@ -1069,6 +1348,13 @@ static struct bfq_entity *bfq_lookup_next_entity(struct bfq_sched_data *sd,
return entity;
}
+static bool next_queue_may_preempt(struct bfq_data *bfqd)
+{
+ struct bfq_sched_data *sd = &bfqd->root_group->sched_data;
+
+ return sd->next_in_service != sd->in_service_entity;
+}
+
/*
* Get next queue for service.
*/
@@ -1085,7 +1371,36 @@ static struct bfq_queue *bfq_get_next_queue(struct bfq_data *bfqd)
sd = &bfqd->root_group->sched_data;
for (; sd ; sd = entity->my_sched_data) {
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ if (entity) {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg(bfqd, bfqg,
+ "get_next_queue: lookup in this group");
+ } else
+ bfq_log_bfqg(bfqd, bfqd->root_group,
+ "get_next_queue: lookup in root group");
+#endif
+
entity = bfq_lookup_next_entity(sd, 1, bfqd);
+
+ bfqq = bfq_entity_to_bfqq(entity);
+ if (bfqq)
+ bfq_log_bfqq(bfqd, bfqq,
+ "get_next_queue: this queue, finish %llu",
+ (((entity->finish>>10)*1000)>>10)>>2);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ else {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg(bfqd, bfqg,
+ "get_next_queue: this entity, finish %llu",
+ (((entity->finish>>10)*1000)>>10)>>2);
+ }
+#endif
+
BUG_ON(!entity);
entity->service = 0;
}
@@ -1103,8 +1418,9 @@ static void __bfq_bfqd_reset_in_service(struct bfq_data *bfqd)
bfqd->in_service_bic = NULL;
}
+ bfq_clear_bfqq_wait_request(bfqd->in_service_queue);
+ hrtimer_try_to_cancel(&bfqd->idle_slice_timer);
bfqd->in_service_queue = NULL;
- del_timer(&bfqd->idle_slice_timer);
}
static void bfq_deactivate_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
@@ -1112,9 +1428,7 @@ static void bfq_deactivate_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
{
struct bfq_entity *entity = &bfqq->entity;
- if (bfqq == bfqd->in_service_queue)
- __bfq_bfqd_reset_in_service(bfqd);
-
+ BUG_ON(bfqq == bfqd->in_service_queue);
bfq_deactivate_entity(entity, requeue);
}
@@ -1122,12 +1436,11 @@ static void bfq_activate_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq)
{
struct bfq_entity *entity = &bfqq->entity;
- bfq_activate_entity(entity);
+ bfq_activate_entity(entity, bfq_bfqq_non_blocking_wait_rq(bfqq));
+ bfq_clear_bfqq_non_blocking_wait_rq(bfqq);
}
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
static void bfqg_stats_update_dequeue(struct bfq_group *bfqg);
-#endif
/*
* Called when the bfqq no longer has requests pending, remove it from
@@ -1138,6 +1451,7 @@ static void bfq_del_bfqq_busy(struct bfq_data *bfqd, struct bfq_queue *bfqq,
{
BUG_ON(!bfq_bfqq_busy(bfqq));
BUG_ON(!RB_EMPTY_ROOT(&bfqq->sort_list));
+ BUG_ON(bfqq == bfqd->in_service_queue);
bfq_log_bfqq(bfqd, bfqq, "del from busy");
@@ -1146,27 +1460,20 @@ static void bfq_del_bfqq_busy(struct bfq_data *bfqd, struct bfq_queue *bfqq,
BUG_ON(bfqd->busy_queues == 0);
bfqd->busy_queues--;
- if (!bfqq->dispatched) {
+ if (!bfqq->dispatched)
bfq_weights_tree_remove(bfqd, &bfqq->entity,
&bfqd->queue_weights_tree);
- if (!blk_queue_nonrot(bfqd->queue)) {
- BUG_ON(!bfqd->busy_in_flight_queues);
- bfqd->busy_in_flight_queues--;
- if (bfq_bfqq_constantly_seeky(bfqq)) {
- BUG_ON(!bfqd->
- const_seeky_busy_in_flight_queues);
- bfqd->const_seeky_busy_in_flight_queues--;
- }
- }
- }
+
if (bfqq->wr_coeff > 1)
bfqd->wr_busy_queues--;
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
bfqg_stats_update_dequeue(bfqq_group(bfqq));
-#endif
+
+ BUG_ON(bfqq->entity.budget < 0);
bfq_deactivate_bfqq(bfqd, bfqq, requeue);
+
+ BUG_ON(bfqq->entity.budget < 0);
}
/*
@@ -1184,16 +1491,11 @@ static void bfq_add_bfqq_busy(struct bfq_data *bfqd, struct bfq_queue *bfqq)
bfq_mark_bfqq_busy(bfqq);
bfqd->busy_queues++;
- if (!bfqq->dispatched) {
+ if (!bfqq->dispatched)
if (bfqq->wr_coeff == 1)
bfq_weights_tree_add(bfqd, &bfqq->entity,
&bfqd->queue_weights_tree);
- if (!blk_queue_nonrot(bfqd->queue)) {
- bfqd->busy_in_flight_queues++;
- if (bfq_bfqq_constantly_seeky(bfqq))
- bfqd->const_seeky_busy_in_flight_queues++;
- }
- }
+
if (bfqq->wr_coeff > 1)
bfqd->wr_busy_queues++;
}
diff --git a/block/bfq.h b/block/bfq.h
index fcce855..ea1e7d8 100644
--- a/block/bfq.h
+++ b/block/bfq.h
@@ -1,5 +1,5 @@
/*
- * BFQ-v7r11 for 4.5.0: data structures and common functions prototypes.
+ * BFQ-v8r4 for 4.8.0: data structures and common functions prototypes.
*
* Based on ideas and code from CFQ:
* Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
@@ -7,7 +7,9 @@
* Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
* Paolo Valente <paolo.valente@unimore.it>
*
- * Copyright (C) 2010 Paolo Valente <paolo.valente@unimore.it>
+ * Copyright (C) 2015 Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2016 Paolo Valente <paolo.valente@linaro.org>
*/
#ifndef _BFQ_H
@@ -28,20 +30,21 @@
#define BFQ_DEFAULT_QUEUE_IOPRIO 4
-#define BFQ_DEFAULT_GRP_WEIGHT 10
+#define BFQ_WEIGHT_LEGACY_DFL 100
#define BFQ_DEFAULT_GRP_IOPRIO 0
#define BFQ_DEFAULT_GRP_CLASS IOPRIO_CLASS_BE
+/*
+ * Soft real-time applications are extremely more latency sensitive
+ * than interactive ones. Over-raise the weight of the former to
+ * privilege them against the latter.
+ */
+#define BFQ_SOFTRT_WEIGHT_FACTOR 100
+
struct bfq_entity;
/**
* struct bfq_service_tree - per ioprio_class service tree.
- * @active: tree for active entities (i.e., those backlogged).
- * @idle: tree for idle entities (i.e., those not backlogged, with V <= F_i).
- * @first_idle: idle entity with minimum F_i.
- * @last_idle: idle entity with maximum F_i.
- * @vtime: scheduler virtual time.
- * @wsum: scheduler weight sum; active and idle entities contribute to it.
*
* Each service tree represents a B-WF2Q+ scheduler on its own. Each
* ioprio_class has its own independent scheduler, and so its own
@@ -49,27 +52,28 @@ struct bfq_entity;
* of the containing bfqd.
*/
struct bfq_service_tree {
+ /* tree for active entities (i.e., those backlogged) */
struct rb_root active;
+ /* tree for idle entities (i.e., not backlogged, with V <= F_i)*/
struct rb_root idle;
- struct bfq_entity *first_idle;
- struct bfq_entity *last_idle;
+ struct bfq_entity *first_idle; /* idle entity with minimum F_i */
+ struct bfq_entity *last_idle; /* idle entity with maximum F_i */
- u64 vtime;
+ u64 vtime; /* scheduler virtual time */
+ /* scheduler weight sum; active and idle entities contribute to it */
unsigned long wsum;
};
/**
* struct bfq_sched_data - multi-class scheduler.
- * @in_service_entity: entity in service.
- * @next_in_service: head-of-the-line entity in the scheduler.
- * @service_tree: array of service trees, one per ioprio_class.
*
* bfq_sched_data is the basic scheduler queue. It supports three
- * ioprio_classes, and can be used either as a toplevel queue or as
- * an intermediate queue on a hierarchical setup.
- * @next_in_service points to the active entity of the sched_data
- * service trees that will be scheduled next.
+ * ioprio_classes, and can be used either as a toplevel queue or as an
+ * intermediate queue on a hierarchical setup. @next_in_service
+ * points to the active entity of the sched_data service trees that
+ * will be scheduled next. It is used to reduce the number of steps
+ * needed for each hierarchical-schedule update.
*
* The supported ioprio_classes are the same as in CFQ, in descending
* priority order, IOPRIO_CLASS_RT, IOPRIO_CLASS_BE, IOPRIO_CLASS_IDLE.
@@ -79,48 +83,29 @@ struct bfq_service_tree {
* All the fields are protected by the queue lock of the containing bfqd.
*/
struct bfq_sched_data {
- struct bfq_entity *in_service_entity;
+ struct bfq_entity *in_service_entity; /* entity in service */
+ /* head-of-the-line entity in the scheduler (see comments above) */
struct bfq_entity *next_in_service;
+ /* array of service trees, one per ioprio_class */
struct bfq_service_tree service_tree[BFQ_IOPRIO_CLASSES];
};
/**
* struct bfq_weight_counter - counter of the number of all active entities
* with a given weight.
- * @weight: weight of the entities that this counter refers to.
- * @num_active: number of active entities with this weight.
- * @weights_node: weights tree member (see bfq_data's @queue_weights_tree
- * and @group_weights_tree).
*/
struct bfq_weight_counter {
- short int weight;
- unsigned int num_active;
+ unsigned int weight; /* weight of the entities this counter refers to */
+ unsigned int num_active; /* nr of active entities with this weight */
+ /*
+ * Weights tree member (see bfq_data's @queue_weights_tree and
+ * @group_weights_tree)
+ */
struct rb_node weights_node;
};
/**
* struct bfq_entity - schedulable entity.
- * @rb_node: service_tree member.
- * @weight_counter: pointer to the weight counter associated with this entity.
- * @on_st: flag, true if the entity is on a tree (either the active or
- * the idle one of its service_tree).
- * @finish: B-WF2Q+ finish timestamp (aka F_i).
- * @start: B-WF2Q+ start timestamp (aka S_i).
- * @tree: tree the entity is enqueued into; %NULL if not on a tree.
- * @min_start: minimum start time of the (active) subtree rooted at
- * this entity; used for O(log N) lookups into active trees.
- * @service: service received during the last round of service.
- * @budget: budget used to calculate F_i; F_i = S_i + @budget / @weight.
- * @weight: weight of the queue
- * @parent: parent entity, for hierarchical scheduling.
- * @my_sched_data: for non-leaf nodes in the cgroup hierarchy, the
- * associated scheduler queue, %NULL on leaf nodes.
- * @sched_data: the scheduler queue this entity belongs to.
- * @ioprio: the ioprio in use.
- * @new_weight: when a weight change is requested, the new weight value.
- * @orig_weight: original weight, used to implement weight boosting
- * @prio_changed: flag, true when the user requested a weight, ioprio or
- * ioprio_class change.
*
* A bfq_entity is used to represent either a bfq_queue (leaf node in the
* cgroup hierarchy) or a bfq_group into the upper level scheduler. Each
@@ -147,27 +132,52 @@ struct bfq_weight_counter {
* containing bfqd.
*/
struct bfq_entity {
- struct rb_node rb_node;
+ struct rb_node rb_node; /* service_tree member */
+ /* pointer to the weight counter associated with this entity */
struct bfq_weight_counter *weight_counter;
+ /*
+ * flag, true if the entity is on a tree (either the active or
+ * the idle one of its service_tree).
+ */
int on_st;
- u64 finish;
- u64 start;
+ u64 finish; /* B-WF2Q+ finish timestamp (aka F_i) */
+ u64 start; /* B-WF2Q+ start timestamp (aka S_i) */
+ /* tree the entity is enqueued into; %NULL if not on a tree */
struct rb_root *tree;
+ /*
+ * minimum start time of the (active) subtree rooted at this
+ * entity; used for O(log N) lookups into active trees
+ */
u64 min_start;
- int service, budget;
- unsigned short weight, new_weight;
- unsigned short orig_weight;
+ /* amount of service received during the last service slot */
+ int service;
+
+ /* budget, used also to calculate F_i: F_i = S_i + @budget / @weight */
+ int budget;
+
+ unsigned int weight; /* weight of the queue */
+ unsigned int new_weight; /* next weight if a change is in progress */
+
+ /* original weight, used to implement weight boosting */
+ unsigned int orig_weight;
+ /* parent entity, for hierarchical scheduling */
struct bfq_entity *parent;
+ /*
+ * For non-leaf nodes in the hierarchy, the associated
+ * scheduler queue, %NULL on leaf nodes.
+ */
struct bfq_sched_data *my_sched_data;
+ /* the scheduler queue this entity belongs to */
struct bfq_sched_data *sched_data;
+ /* flag, set to request a weight, ioprio or ioprio_class change */
int prio_changed;
};
@@ -175,56 +185,6 @@ struct bfq_group;
/**
* struct bfq_queue - leaf schedulable entity.
- * @ref: reference counter.
- * @bfqd: parent bfq_data.
- * @new_ioprio: when an ioprio change is requested, the new ioprio value.
- * @ioprio_class: the ioprio_class in use.
- * @new_ioprio_class: when an ioprio_class change is requested, the new
- * ioprio_class value.
- * @new_bfqq: shared bfq_queue if queue is cooperating with
- * one or more other queues.
- * @pos_node: request-position tree member (see bfq_group's @rq_pos_tree).
- * @pos_root: request-position tree root (see bfq_group's @rq_pos_tree).
- * @sort_list: sorted list of pending requests.
- * @next_rq: if fifo isn't expired, next request to serve.
- * @queued: nr of requests queued in @sort_list.
- * @allocated: currently allocated requests.
- * @meta_pending: pending metadata requests.
- * @fifo: fifo list of requests in sort_list.
- * @entity: entity representing this queue in the scheduler.
- * @max_budget: maximum budget allowed from the feedback mechanism.
- * @budget_timeout: budget expiration (in jiffies).
- * @dispatched: number of requests on the dispatch list or inside driver.
- * @flags: status flags.
- * @bfqq_list: node for active/idle bfqq list inside our bfqd.
- * @burst_list_node: node for the device's burst list.
- * @seek_samples: number of seeks sampled
- * @seek_total: sum of the distances of the seeks sampled
- * @seek_mean: mean seek distance
- * @last_request_pos: position of the last request enqueued
- * @requests_within_timer: number of consecutive pairs of request completion
- * and arrival, such that the queue becomes idle
- * after the completion, but the next request arrives
- * within an idle time slice; used only if the queue's
- * IO_bound has been cleared.
- * @pid: pid of the process owning the queue, used for logging purposes.
- * @last_wr_start_finish: start time of the current weight-raising period if
- * the @bfq-queue is being weight-raised, otherwise
- * finish time of the last weight-raising period
- * @wr_cur_max_time: current max raising time for this queue
- * @soft_rt_next_start: minimum time instant such that, only if a new
- * request is enqueued after this time instant in an
- * idle @bfq_queue with no outstanding requests, then
- * the task associated with the queue it is deemed as
- * soft real-time (see the comments to the function
- * bfq_bfqq_softrt_next_start())
- * @last_idle_bklogged: time of the last transition of the @bfq_queue from
- * idle to backlogged
- * @service_from_backlogged: cumulative service received from the @bfq_queue
- * since the last transition from idle to
- * backlogged
- * @bic: pointer to the bfq_io_cq owning the bfq_queue, set to %NULL if the
- * queue is shared
*
* A bfq_queue is a leaf request queue; it can be associated with an
* io_context or more, if it is async or shared between cooperating
@@ -235,117 +195,174 @@ struct bfq_group;
* All the fields are protected by the queue lock of the containing bfqd.
*/
struct bfq_queue {
- atomic_t ref;
+ /* reference counter */
+ int ref;
+ /* parent bfq_data */
struct bfq_data *bfqd;
- unsigned short ioprio, new_ioprio;
- unsigned short ioprio_class, new_ioprio_class;
+ /* current ioprio and ioprio class */
+ unsigned short ioprio, ioprio_class;
+ /* next ioprio and ioprio class if a change is in progress */
+ unsigned short new_ioprio, new_ioprio_class;
- /* fields for cooperating queues handling */
+ /*
+ * Shared bfq_queue if queue is cooperating with one or more
+ * other queues.
+ */
struct bfq_queue *new_bfqq;
+ /* request-position tree member (see bfq_group's @rq_pos_tree) */
struct rb_node pos_node;
+ /* request-position tree root (see bfq_group's @rq_pos_tree) */
struct rb_root *pos_root;
+ /* sorted list of pending requests */
struct rb_root sort_list;
+ /* if fifo isn't expired, next request to serve */
struct request *next_rq;
+ /* number of sync and async requests queued */
int queued[2];
+ /* number of sync and async requests currently allocated */
int allocated[2];
+ /* number of pending metadata requests */
int meta_pending;
+ /* fifo list of requests in sort_list */
struct list_head fifo;
+ /* entity representing this queue in the scheduler */
struct bfq_entity entity;
+ /* maximum budget allowed from the feedback mechanism */
int max_budget;
+ /* budget expiration (in jiffies) */
unsigned long budget_timeout;
+ /* number of requests on the dispatch list or inside driver */
int dispatched;
- unsigned int flags;
+ unsigned int flags; /* status flags.*/
+ /* node for active/idle bfqq list inside parent bfqd */
struct list_head bfqq_list;
+ /* bit vector: a 1 for each seeky requests in history */
+ u32 seek_history;
+
+ /* node for the device's burst list */
struct hlist_node burst_list_node;
- unsigned int seek_samples;
- u64 seek_total;
- sector_t seek_mean;
+ /* position of the last request enqueued */
sector_t last_request_pos;
+ /* Number of consecutive pairs of request completion and
+ * arrival, such that the queue becomes idle after the
+ * completion, but the next request arrives within an idle
+ * time slice; used only if the queue's IO_bound flag has been
+ * cleared.
+ */
unsigned int requests_within_timer;
+ /* pid of the process owning the queue, used for logging purposes */
pid_t pid;
+
+ /*
+ * Pointer to the bfq_io_cq owning the bfq_queue, set to %NULL
+ * if the queue is shared.
+ */
struct bfq_io_cq *bic;
- /* weight-raising fields */
+ /* current maximum weight-raising time for this queue */
unsigned long wr_cur_max_time;
+ /*
+ * Minimum time instant such that, only if a new request is
+ * enqueued after this time instant in an idle @bfq_queue with
+ * no outstanding requests, then the task associated with the
+ * queue it is deemed as soft real-time (see the comments on
+ * the function bfq_bfqq_softrt_next_start())
+ */
unsigned long soft_rt_next_start;
+ /*
+ * Start time of the current weight-raising period if
+ * the @bfq-queue is being weight-raised, otherwise
+ * finish time of the last weight-raising period.
+ */
unsigned long last_wr_start_finish;
+ /* factor by which the weight of this queue is multiplied */
unsigned int wr_coeff;
+ /*
+ * Time of the last transition of the @bfq_queue from idle to
+ * backlogged.
+ */
unsigned long last_idle_bklogged;
+ /*
+ * Cumulative service received from the @bfq_queue since the
+ * last transition from idle to backlogged.
+ */
unsigned long service_from_backlogged;
+ /*
+ * Value of wr start time when switching to soft rt
+ */
+ unsigned long wr_start_at_switch_to_srt;
+
+ unsigned long split_time; /* time of last split */
};
/**
* struct bfq_ttime - per process thinktime stats.
- * @ttime_total: total process thinktime
- * @ttime_samples: number of thinktime samples
- * @ttime_mean: average process thinktime
*/
struct bfq_ttime {
- unsigned long last_end_request;
+ u64 last_end_request; /* completion time of last request */
+
+ u64 ttime_total; /* total process thinktime */
+ unsigned long ttime_samples; /* number of thinktime samples */
+ u64 ttime_mean; /* average process thinktime */
- unsigned long ttime_total;
- unsigned long ttime_samples;
- unsigned long ttime_mean;
};
/**
* struct bfq_io_cq - per (request_queue, io_context) structure.
- * @icq: associated io_cq structure
- * @bfqq: array of two process queues, the sync and the async
- * @ttime: associated @bfq_ttime struct
- * @ioprio: per (request_queue, blkcg) ioprio.
- * @blkcg_id: id of the blkcg the related io_cq belongs to.
- * @wr_time_left: snapshot of the time left before weight raising ends
- * for the sync queue associated to this process; this
- * snapshot is taken to remember this value while the weight
- * raising is suspended because the queue is merged with a
- * shared queue, and is used to set @raising_cur_max_time
- * when the queue is split from the shared queue and its
- * weight is raised again
- * @saved_idle_window: same purpose as the previous field for the idle
- * window
- * @saved_IO_bound: same purpose as the previous two fields for the I/O
- * bound classification of a queue
- * @saved_in_large_burst: same purpose as the previous fields for the
- * value of the field keeping the queue's belonging
- * to a large burst
- * @was_in_burst_list: true if the queue belonged to a burst list
- * before its merge with another cooperating queue
- * @cooperations: counter of consecutive successful queue merges underwent
- * by any of the process' @bfq_queues
- * @failed_cooperations: counter of consecutive failed queue merges of any
- * of the process' @bfq_queues
*/
struct bfq_io_cq {
+ /* associated io_cq structure */
struct io_cq icq; /* must be the first member */
+ /* array of two process queues, the sync and the async */
struct bfq_queue *bfqq[2];
+ /* associated @bfq_ttime struct */
struct bfq_ttime ttime;
+ /* per (request_queue, blkcg) ioprio */
int ioprio;
-
#ifdef CONFIG_BFQ_GROUP_IOSCHED
- uint64_t blkcg_id; /* the current blkcg ID */
+ uint64_t blkcg_serial_nr; /* the current blkcg serial */
#endif
- unsigned int wr_time_left;
+ /*
+ * Snapshot of the idle window before merging; taken to
+ * remember this value while the queue is merged, so as to be
+ * able to restore it in case of split.
+ */
bool saved_idle_window;
+ /*
+ * Same purpose as the previous two fields for the I/O bound
+ * classification of a queue.
+ */
bool saved_IO_bound;
+ /*
+ * Same purpose as the previous fields for the value of the
+ * field keeping the queue's belonging to a large burst
+ */
bool saved_in_large_burst;
+ /*
+ * True if the queue belonged to a burst list before its merge
+ * with another cooperating queue.
+ */
bool was_in_burst_list;
- unsigned int cooperations;
- unsigned int failed_cooperations;
+ /*
+ * Similar to previous fields: save wr information.
+ */
+ unsigned long saved_wr_coeff;
+ unsigned long saved_last_wr_start_finish;
+ unsigned long saved_wr_start_at_switch_to_srt;
};
enum bfq_device_speed {
@@ -354,224 +371,234 @@ enum bfq_device_speed {
};
/**
- * struct bfq_data - per device data structure.
- * @queue: request queue for the managed device.
- * @root_group: root bfq_group for the device.
- * @active_numerous_groups: number of bfq_groups containing more than one
- * active @bfq_entity.
- * @queue_weights_tree: rbtree of weight counters of @bfq_queues, sorted by
- * weight. Used to keep track of whether all @bfq_queues
- * have the same weight. The tree contains one counter
- * for each distinct weight associated to some active
- * and not weight-raised @bfq_queue (see the comments to
- * the functions bfq_weights_tree_[add|remove] for
- * further details).
- * @group_weights_tree: rbtree of non-queue @bfq_entity weight counters, sorted
- * by weight. Used to keep track of whether all
- * @bfq_groups have the same weight. The tree contains
- * one counter for each distinct weight associated to
- * some active @bfq_group (see the comments to the
- * functions bfq_weights_tree_[add|remove] for further
- * details).
- * @busy_queues: number of bfq_queues containing requests (including the
- * queue in service, even if it is idling).
- * @busy_in_flight_queues: number of @bfq_queues containing pending or
- * in-flight requests, plus the @bfq_queue in
- * service, even if idle but waiting for the
- * possible arrival of its next sync request. This
- * field is updated only if the device is rotational,
- * but used only if the device is also NCQ-capable.
- * The reason why the field is updated also for non-
- * NCQ-capable rotational devices is related to the
- * fact that the value of @hw_tag may be set also
- * later than when busy_in_flight_queues may need to
- * be incremented for the first time(s). Taking also
- * this possibility into account, to avoid unbalanced
- * increments/decrements, would imply more overhead
- * than just updating busy_in_flight_queues
- * regardless of the value of @hw_tag.
- * @const_seeky_busy_in_flight_queues: number of constantly-seeky @bfq_queues
- * (that is, seeky queues that expired
- * for budget timeout at least once)
- * containing pending or in-flight
- * requests, including the in-service
- * @bfq_queue if constantly seeky. This
- * field is updated only if the device
- * is rotational, but used only if the
- * device is also NCQ-capable (see the
- * comments to @busy_in_flight_queues).
- * @wr_busy_queues: number of weight-raised busy @bfq_queues.
- * @queued: number of queued requests.
- * @rq_in_driver: number of requests dispatched and waiting for completion.
- * @sync_flight: number of sync requests in the driver.
- * @max_rq_in_driver: max number of reqs in driver in the last
- * @hw_tag_samples completed requests.
- * @hw_tag_samples: nr of samples used to calculate hw_tag.
- * @hw_tag: flag set to one if the driver is showing a queueing behavior.
- * @budgets_assigned: number of budgets assigned.
- * @idle_slice_timer: timer set when idling for the next sequential request
- * from the queue in service.
- * @unplug_work: delayed work to restart dispatching on the request queue.
- * @in_service_queue: bfq_queue in service.
- * @in_service_bic: bfq_io_cq (bic) associated with the @in_service_queue.
- * @last_position: on-disk position of the last served request.
- * @last_budget_start: beginning of the last budget.
- * @last_idling_start: beginning of the last idle slice.
- * @peak_rate: peak transfer rate observed for a budget.
- * @peak_rate_samples: number of samples used to calculate @peak_rate.
- * @bfq_max_budget: maximum budget allotted to a bfq_queue before
- * rescheduling.
- * @active_list: list of all the bfq_queues active on the device.
- * @idle_list: list of all the bfq_queues idle on the device.
- * @bfq_fifo_expire: timeout for async/sync requests; when it expires
- * requests are served in fifo order.
- * @bfq_back_penalty: weight of backward seeks wrt forward ones.
- * @bfq_back_max: maximum allowed backward seek.
- * @bfq_slice_idle: maximum idling time.
- * @bfq_user_max_budget: user-configured max budget value
- * (0 for auto-tuning).
- * @bfq_max_budget_async_rq: maximum budget (in nr of requests) allotted to
- * async queues.
- * @bfq_timeout: timeout for bfq_queues to consume their budget; used to
- * to prevent seeky queues to impose long latencies to well
- * behaved ones (this also implies that seeky queues cannot
- * receive guarantees in the service domain; after a timeout
- * they are charged for the whole allocated budget, to try
- * to preserve a behavior reasonably fair among them, but
- * without service-domain guarantees).
- * @bfq_coop_thresh: number of queue merges after which a @bfq_queue is
- * no more granted any weight-raising.
- * @bfq_failed_cooperations: number of consecutive failed cooperation
- * chances after which weight-raising is restored
- * to a queue subject to more than bfq_coop_thresh
- * queue merges.
- * @bfq_requests_within_timer: number of consecutive requests that must be
- * issued within the idle time slice to set
- * again idling to a queue which was marked as
- * non-I/O-bound (see the definition of the
- * IO_bound flag for further details).
- * @last_ins_in_burst: last time at which a queue entered the current
- * burst of queues being activated shortly after
- * each other; for more details about this and the
- * following parameters related to a burst of
- * activations, see the comments to the function
- * @bfq_handle_burst.
- * @bfq_burst_interval: reference time interval used to decide whether a
- * queue has been activated shortly after
- * @last_ins_in_burst.
- * @burst_size: number of queues in the current burst of queue activations.
- * @bfq_large_burst_thresh: maximum burst size above which the current
- * queue-activation burst is deemed as 'large'.
- * @large_burst: true if a large queue-activation burst is in progress.
- * @burst_list: head of the burst list (as for the above fields, more details
- * in the comments to the function bfq_handle_burst).
- * @low_latency: if set to true, low-latency heuristics are enabled.
- * @bfq_wr_coeff: maximum factor by which the weight of a weight-raised
- * queue is multiplied.
- * @bfq_wr_max_time: maximum duration of a weight-raising period (jiffies).
- * @bfq_wr_rt_max_time: maximum duration for soft real-time processes.
- * @bfq_wr_min_idle_time: minimum idle period after which weight-raising
- * may be reactivated for a queue (in jiffies).
- * @bfq_wr_min_inter_arr_async: minimum period between request arrivals
- * after which weight-raising may be
- * reactivated for an already busy queue
- * (in jiffies).
- * @bfq_wr_max_softrt_rate: max service-rate for a soft real-time queue,
- * sectors per seconds.
- * @RT_prod: cached value of the product R*T used for computing the maximum
- * duration of the weight raising automatically.
- * @device_speed: device-speed class for the low-latency heuristic.
- * @oom_bfqq: fallback dummy bfqq for extreme OOM conditions.
+ * struct bfq_data - per-device data structure.
*
* All the fields are protected by the @queue lock.
*/
struct bfq_data {
+ /* request queue for the device */
struct request_queue *queue;
+ /* root bfq_group for the device */
struct bfq_group *root_group;
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
- int active_numerous_groups;
-#endif
-
+ /*
+ * rbtree of weight counters of @bfq_queues, sorted by
+ * weight. Used to keep track of whether all @bfq_queues have
+ * the same weight. The tree contains one counter for each
+ * distinct weight associated to some active and not
+ * weight-raised @bfq_queue (see the comments to the functions
+ * bfq_weights_tree_[add|remove] for further details).
+ */
struct rb_root queue_weights_tree;
+ /*
+ * rbtree of non-queue @bfq_entity weight counters, sorted by
+ * weight. Used to keep track of whether all @bfq_groups have
+ * the same weight. The tree contains one counter for each
+ * distinct weight associated to some active @bfq_group (see
+ * the comments to the functions bfq_weights_tree_[add|remove]
+ * for further details).
+ */
struct rb_root group_weights_tree;
+ /*
+ * Number of bfq_queues containing requests (including the
+ * queue in service, even if it is idling).
+ */
int busy_queues;
- int busy_in_flight_queues;
- int const_seeky_busy_in_flight_queues;
+ /* number of weight-raised busy @bfq_queues */
int wr_busy_queues;
+ /* number of queued requests */
int queued;
+ /* number of requests dispatched and waiting for completion */
int rq_in_driver;
- int sync_flight;
+ /*
+ * Maximum number of requests in driver in the last
+ * @hw_tag_samples completed requests.
+ */
int max_rq_in_driver;
+ /* number of samples used to calculate hw_tag */
int hw_tag_samples;
+ /* flag set to one if the driver is showing a queueing behavior */
int hw_tag;
+ /* number of budgets assigned */
int budgets_assigned;
- struct timer_list idle_slice_timer;
+ /*
+ * Timer set when idling (waiting) for the next request from
+ * the queue in service.
+ */
+ struct hrtimer idle_slice_timer;
+ /* delayed work to restart dispatching on the request queue */
struct work_struct unplug_work;
+ /* bfq_queue in service */
struct bfq_queue *in_service_queue;
+ /* bfq_io_cq (bic) associated with the @in_service_queue */
struct bfq_io_cq *in_service_bic;
+ /* on-disk position of the last served request */
sector_t last_position;
+ /* time of last request completion (ns) */
+ u64 last_completion;
+
+ /* time of first rq dispatch in current observation interval (ns) */
+ u64 first_dispatch;
+ /* time of last rq dispatch in current observation interval (ns) */
+ u64 last_dispatch;
+
+ /* beginning of the last budget */
ktime_t last_budget_start;
+ /* beginning of the last idle slice */
ktime_t last_idling_start;
+
+ /* number of samples in current observation interval */
int peak_rate_samples;
- u64 peak_rate;
+ /* num of samples of seq dispatches in current observation interval */
+ u32 sequential_samples;
+ /* total num of sectors transferred in current observation interval */
+ u64 tot_sectors_dispatched;
+ /* max rq size seen during current observation interval (sectors) */
+ u32 last_rq_max_size;
+ /* time elapsed from first dispatch in current observ. interval (us) */
+ u64 delta_from_first;
+ /* current estimate of device peak rate */
+ u32 peak_rate;
+
+ /* maximum budget allotted to a bfq_queue before rescheduling */
int bfq_max_budget;
+ /* list of all the bfq_queues active on the device */
struct list_head active_list;
+ /* list of all the bfq_queues idle on the device */
struct list_head idle_list;
- unsigned int bfq_fifo_expire[2];
+ /*
+ * Timeout for async/sync requests; when it fires, requests
+ * are served in fifo order.
+ */
+ u64 bfq_fifo_expire[2];
+ /* weight of backward seeks wrt forward ones */
unsigned int bfq_back_penalty;
+ /* maximum allowed backward seek */
unsigned int bfq_back_max;
- unsigned int bfq_slice_idle;
+ /* maximum idling time */
+ u32 bfq_slice_idle;
+ /* last time CLASS_IDLE was served */
u64 bfq_class_idle_last_service;
+ /* user-configured max budget value (0 for auto-tuning) */
int bfq_user_max_budget;
- int bfq_max_budget_async_rq;
- unsigned int bfq_timeout[2];
-
- unsigned int bfq_coop_thresh;
- unsigned int bfq_failed_cooperations;
+ /*
+ * Timeout for bfq_queues to consume their budget; used to
+ * prevent seeky queues from imposing long latencies to
+ * sequential or quasi-sequential ones (this also implies that
+ * seeky queues cannot receive guarantees in the service
+ * domain; after a timeout they are charged for the time they
+ * have been in service, to preserve fairness among them, but
+ * without service-domain guarantees).
+ */
+ unsigned int bfq_timeout;
+
+ /*
+ * Number of consecutive requests that must be issued within
+ * the idle time slice to set again idling to a queue which
+ * was marked as non-I/O-bound (see the definition of the
+ * IO_bound flag for further details).
+ */
unsigned int bfq_requests_within_timer;
+ /*
+ * Force device idling whenever needed to provide accurate
+ * service guarantees, without caring about throughput
+ * issues. CAVEAT: this may even increase latencies, in case
+ * of useless idling for processes that did stop doing I/O.
+ */
+ bool strict_guarantees;
+
+ /*
+ * Last time at which a queue entered the current burst of
+ * queues being activated shortly after each other; for more
+ * details about this and the following parameters related to
+ * a burst of activations, see the comments on the function
+ * bfq_handle_burst.
+ */
unsigned long last_ins_in_burst;
+ /*
+ * Reference time interval used to decide whether a queue has
+ * been activated shortly after @last_ins_in_burst.
+ */
unsigned long bfq_burst_interval;
+ /* number of queues in the current burst of queue activations */
int burst_size;
+
+ /* common parent entity for the queues in the burst */
+ struct bfq_entity *burst_parent_entity;
+ /* Maximum burst size above which the current queue-activation
+ * burst is deemed as 'large'.
+ */
unsigned long bfq_large_burst_thresh;
+ /* true if a large queue-activation burst is in progress */
bool large_burst;
+ /*
+ * Head of the burst list (as for the above fields, more
+ * details in the comments on the function bfq_handle_burst).
+ */
struct hlist_head burst_list;
+ /* if set to true, low-latency heuristics are enabled */
bool low_latency;
-
- /* parameters of the low_latency heuristics */
+ /*
+ * Maximum factor by which the weight of a weight-raised queue
+ * is multiplied.
+ */
unsigned int bfq_wr_coeff;
+ /* maximum duration of a weight-raising period (jiffies) */
unsigned int bfq_wr_max_time;
+
+ /* Maximum weight-raising duration for soft real-time processes */
unsigned int bfq_wr_rt_max_time;
+ /*
+ * Minimum idle period after which weight-raising may be
+ * reactivated for a queue (in jiffies).
+ */
unsigned int bfq_wr_min_idle_time;
+ /*
+ * Minimum period between request arrivals after which
+ * weight-raising may be reactivated for an already busy async
+ * queue (in jiffies).
+ */
unsigned long bfq_wr_min_inter_arr_async;
+
+ /* Max service-rate for a soft real-time queue, in sectors/sec */
unsigned int bfq_wr_max_softrt_rate;
+ /*
+ * Cached value of the product R*T, used for computing the
+ * maximum duration of weight raising automatically.
+ */
u64 RT_prod;
+ /* device-speed class for the low-latency heuristic */
enum bfq_device_speed device_speed;
+ /* fallback dummy bfqq for extreme OOM conditions */
struct bfq_queue oom_bfqq;
};
enum bfqq_state_flags {
- BFQ_BFQQ_FLAG_busy = 0, /* has requests or is in service */
+ BFQ_BFQQ_FLAG_just_created = 0, /* queue just allocated */
+ BFQ_BFQQ_FLAG_busy, /* has requests or is in service */
BFQ_BFQQ_FLAG_wait_request, /* waiting for a request */
+ BFQ_BFQQ_FLAG_non_blocking_wait_rq, /*
+ * waiting for a request
+ * without idling the device
+ */
BFQ_BFQQ_FLAG_must_alloc, /* must be allowed rq alloc */
BFQ_BFQQ_FLAG_fifo_expire, /* FIFO checked in this slice */
BFQ_BFQQ_FLAG_idle_window, /* slice idling enabled */
BFQ_BFQQ_FLAG_sync, /* synchronous queue */
- BFQ_BFQQ_FLAG_budget_new, /* no completion with this budget */
BFQ_BFQQ_FLAG_IO_bound, /*
* bfqq has timed-out at least once
* having consumed at most 2/10 of
@@ -581,17 +608,12 @@ enum bfqq_state_flags {
* bfqq activated in a large burst,
* see comments to bfq_handle_burst.
*/
- BFQ_BFQQ_FLAG_constantly_seeky, /*
- * bfqq has proved to be slow and
- * seeky until budget timeout
- */
BFQ_BFQQ_FLAG_softrt_update, /*
* may need softrt-next-start
* update
*/
BFQ_BFQQ_FLAG_coop, /* bfqq is shared */
- BFQ_BFQQ_FLAG_split_coop, /* shared bfqq will be split */
- BFQ_BFQQ_FLAG_just_split, /* queue has just been split */
+ BFQ_BFQQ_FLAG_split_coop /* shared bfqq will be split */
};
#define BFQ_BFQQ_FNS(name) \
@@ -608,25 +630,53 @@ static int bfq_bfqq_##name(const struct bfq_queue *bfqq) \
return ((bfqq)->flags & (1 << BFQ_BFQQ_FLAG_##name)) != 0; \
}
+BFQ_BFQQ_FNS(just_created);
BFQ_BFQQ_FNS(busy);
BFQ_BFQQ_FNS(wait_request);
+BFQ_BFQQ_FNS(non_blocking_wait_rq);
BFQ_BFQQ_FNS(must_alloc);
BFQ_BFQQ_FNS(fifo_expire);
BFQ_BFQQ_FNS(idle_window);
BFQ_BFQQ_FNS(sync);
-BFQ_BFQQ_FNS(budget_new);
BFQ_BFQQ_FNS(IO_bound);
BFQ_BFQQ_FNS(in_large_burst);
-BFQ_BFQQ_FNS(constantly_seeky);
BFQ_BFQQ_FNS(coop);
BFQ_BFQQ_FNS(split_coop);
-BFQ_BFQQ_FNS(just_split);
BFQ_BFQQ_FNS(softrt_update);
#undef BFQ_BFQQ_FNS
/* Logging facilities. */
-#define bfq_log_bfqq(bfqd, bfqq, fmt, args...) \
- blk_add_trace_msg((bfqd)->queue, "bfq%d " fmt, (bfqq)->pid, ##args)
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+static struct bfq_group *bfqq_group(struct bfq_queue *bfqq);
+static struct blkcg_gq *bfqg_to_blkg(struct bfq_group *bfqg);
+
+#define bfq_log_bfqq(bfqd, bfqq, fmt, args...) do { \
+ char __pbuf[128]; \
+ \
+ assert_spin_locked((bfqd)->queue->queue_lock); \
+ blkg_path(bfqg_to_blkg(bfqq_group(bfqq)), __pbuf, sizeof(__pbuf)); \
+ blk_add_trace_msg((bfqd)->queue, "bfq%d%c %s " fmt, \
+ (bfqq)->pid, \
+ bfq_bfqq_sync((bfqq)) ? 'S' : 'A', \
+ __pbuf, ##args); \
+} while (0)
+
+#define bfq_log_bfqg(bfqd, bfqg, fmt, args...) do { \
+ char __pbuf[128]; \
+ \
+ blkg_path(bfqg_to_blkg(bfqg), __pbuf, sizeof(__pbuf)); \
+ blk_add_trace_msg((bfqd)->queue, "%s " fmt, __pbuf, ##args); \
+} while (0)
+
+#else /* CONFIG_BFQ_GROUP_IOSCHED */
+
+#define bfq_log_bfqq(bfqd, bfqq, fmt, args...) \
+ blk_add_trace_msg((bfqd)->queue, "bfq%d%c " fmt, (bfqq)->pid, \
+ bfq_bfqq_sync((bfqq)) ? 'S' : 'A', \
+ ##args)
+#define bfq_log_bfqg(bfqd, bfqg, fmt, args...) do {} while (0)
+
+#endif /* CONFIG_BFQ_GROUP_IOSCHED */
#define bfq_log(bfqd, fmt, args...) \
blk_add_trace_msg((bfqd)->queue, "bfq " fmt, ##args)
@@ -640,15 +690,12 @@ enum bfqq_expiration {
BFQ_BFQQ_BUDGET_TIMEOUT, /* budget took too long to be used */
BFQ_BFQQ_BUDGET_EXHAUSTED, /* budget consumed */
BFQ_BFQQ_NO_MORE_REQUESTS, /* the queue has no more requests */
+ BFQ_BFQQ_PREEMPTED /* preemption in progress */
};
-#ifdef CONFIG_BFQ_GROUP_IOSCHED
struct bfqg_stats {
- /* total bytes transferred */
- struct blkg_rwstat service_bytes;
- /* total IOs serviced, post merge */
- struct blkg_rwstat serviced;
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
/* number of ios merged */
struct blkg_rwstat merged;
/* total time spent on device in ns, may not be accurate w/ queueing */
@@ -657,12 +704,8 @@ struct bfqg_stats {
struct blkg_rwstat wait_time;
/* number of IOs queued up */
struct blkg_rwstat queued;
- /* total sectors transferred */
- struct blkg_stat sectors;
/* total disk time and nr sectors dispatched by this group */
struct blkg_stat time;
- /* time not charged to this cgroup */
- struct blkg_stat unaccounted_time;
/* sum of number of ios queued across all samples */
struct blkg_stat avg_queue_size_sum;
/* count of samples taken for average */
@@ -680,8 +723,10 @@ struct bfqg_stats {
uint64_t start_idle_time;
uint64_t start_empty_time;
uint16_t flags;
+#endif
};
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
/*
* struct bfq_group_data - per-blkcg storage for the blkio subsystem.
*
@@ -692,7 +737,7 @@ struct bfq_group_data {
/* must be the first member */
struct blkcg_policy_data pd;
- unsigned short weight;
+ unsigned int weight;
};
/**
@@ -712,7 +757,7 @@ struct bfq_group_data {
* unused for the root group. Used to know whether there
* are groups with more than one active @bfq_entity
* (see the comments to the function
- * bfq_bfqq_must_not_expire()).
+ * bfq_bfqq_may_idle()).
* @rq_pos_tree: rbtree sorted by next_request position, used when
* determining if two or more queues have interleaving
* requests (see bfq_find_close_cooperator()).
@@ -745,7 +790,6 @@ struct bfq_group {
struct rb_root rq_pos_tree;
struct bfqg_stats stats;
- struct bfqg_stats dead_stats; /* stats pushed from dead children */
};
#else
@@ -767,11 +811,25 @@ bfq_entity_service_tree(struct bfq_entity *entity)
struct bfq_sched_data *sched_data = entity->sched_data;
struct bfq_queue *bfqq = bfq_entity_to_bfqq(entity);
unsigned int idx = bfqq ? bfqq->ioprio_class - 1 :
- BFQ_DEFAULT_GRP_CLASS;
+ BFQ_DEFAULT_GRP_CLASS - 1;
BUG_ON(idx >= BFQ_IOPRIO_CLASSES);
BUG_ON(sched_data == NULL);
+ if (bfqq)
+ bfq_log_bfqq(bfqq->bfqd, bfqq,
+ "entity_service_tree %p %d",
+ sched_data->service_tree + idx, idx);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
+ else {
+ struct bfq_group *bfqg =
+ container_of(entity, struct bfq_group, entity);
+
+ bfq_log_bfqg((struct bfq_data *)bfqg->bfqd, bfqg,
+ "entity_service_tree %p %d",
+ sched_data->service_tree + idx, idx);
+ }
+#endif
return sched_data->service_tree + idx;
}
@@ -791,47 +849,6 @@ static struct bfq_data *bic_to_bfqd(struct bfq_io_cq *bic)
return bic->icq.q->elevator->elevator_data;
}
-/**
- * bfq_get_bfqd_locked - get a lock to a bfqd using a RCU protected pointer.
- * @ptr: a pointer to a bfqd.
- * @flags: storage for the flags to be saved.
- *
- * This function allows bfqg->bfqd to be protected by the
- * queue lock of the bfqd they reference; the pointer is dereferenced
- * under RCU, so the storage for bfqd is assured to be safe as long
- * as the RCU read side critical section does not end. After the
- * bfqd->queue->queue_lock is taken the pointer is rechecked, to be
- * sure that no other writer accessed it. If we raced with a writer,
- * the function returns NULL, with the queue unlocked, otherwise it
- * returns the dereferenced pointer, with the queue locked.
- */
-static struct bfq_data *bfq_get_bfqd_locked(void **ptr, unsigned long *flags)
-{
- struct bfq_data *bfqd;
-
- rcu_read_lock();
- bfqd = rcu_dereference(*(struct bfq_data **)ptr);
-
- if (bfqd != NULL) {
- spin_lock_irqsave(bfqd->queue->queue_lock, *flags);
- if (ptr == NULL)
- printk(KERN_CRIT "get_bfqd_locked pointer NULL\n");
- else if (*ptr == bfqd)
- goto out;
- spin_unlock_irqrestore(bfqd->queue->queue_lock, *flags);
- }
-
- bfqd = NULL;
-out:
- rcu_read_unlock();
- return bfqd;
-}
-
-static void bfq_put_bfqd_unlock(struct bfq_data *bfqd, unsigned long *flags)
-{
- spin_unlock_irqrestore(bfqd->queue->queue_lock, *flags);
-}
-
#ifdef CONFIG_BFQ_GROUP_IOSCHED
static struct bfq_group *bfq_bfqq_to_bfqg(struct bfq_queue *bfqq)
@@ -857,11 +874,13 @@ static void bfq_check_ioprio_change(struct bfq_io_cq *bic, struct bio *bio);
static void bfq_put_queue(struct bfq_queue *bfqq);
static void bfq_dispatch_insert(struct request_queue *q, struct request *rq);
static struct bfq_queue *bfq_get_queue(struct bfq_data *bfqd,
- struct bio *bio, int is_sync,
- struct bfq_io_cq *bic, gfp_t gfp_mask);
+ struct bio *bio, bool is_sync,
+ struct bfq_io_cq *bic);
static void bfq_end_wr_async_queues(struct bfq_data *bfqd,
struct bfq_group *bfqg);
+#ifdef CONFIG_BFQ_GROUP_IOSCHED
static void bfq_put_async_queues(struct bfq_data *bfqd, struct bfq_group *bfqg);
+#endif
static void bfq_exit_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq);
#endif /* _BFQ_H */
--
2.7.4 (Apple Git-66)
Reference in a new issue View git blame Copy permalink