Djam/kernel-5.15
1
0
Fork 0
mirror of https://abf.rosa.ru/djam/kernel-5.15.git synced 2025-02-23 18:42:55 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
kernel-5.15/kernel-arm64.config

12518 lines
281 KiB
Text
Raw Normal View History

add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Automatically generated file; DO NOT EDIT.
Update patches and configs for 5.10.47
2021-07-01 00:12:29 +03:00
# Linux/arm64 5.10.47 Kernel Configuration
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_CC_VERSION_TEXT="gcc (GCC) 11.1.0 20210427 (ROSA)"
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CC_IS_GCC=y
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_GCC_VERSION=110100
Virtio as module (no need to make it built in), enable VirtualBox guest modules
2021-02-23 13:28:34 +03:00
CONFIG_LD_VERSION=236010000
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CLANG_VERSION=0
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LLD_VERSION=0
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CC_CAN_LINK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CC_CAN_LINK_STATIC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CC_HAS_ASM_GOTO=y
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BUILDTIME_TABLE_SORT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DEFAULT_INIT="/sbin/init"
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_WATCH_QUEUE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CROSS_MEMORY_ATTACH=y
Disable support of libc5 (pre-glibc) Nobody needs it. It is just an unmaintained potential security hole.
2021-02-23 14:31:45 +03:00
# CONFIG_USELIB is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GENERIC_IRQ_IPI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
Tune kernel interactivity Change PREEMPT to PREEMPT_VOLUNTARY: it is a more in the middle interactivity which should be OK for both servers and desktops, Void Linux and Ubuntu have it. Previous value was too much preemption.
2021-02-23 14:57:41 +03:00
# CONFIG_NO_HZ is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PREEMPT_NONE is not set
Tune kernel interactivity Change PREEMPT to PREEMPT_VOLUNTARY: it is a more in the middle interactivity which should be OK for both servers and desktops, Void Linux and Ubuntu have it. Previous value was too much preemption.
2021-02-23 14:57:41 +03:00
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCHED_THERMAL_PRESSURE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PSI_DEFAULT_DISABLED is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IKCONFIG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IKHEADERS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LOG_BUF_SHIFT=18
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_GENERIC_SCHED_CLOCK=y
#
# Scheduler features
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_UCLAMP_TASK is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CC_HAS_INT128=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CGROUP_RDMA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TIME_NS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RD_ZSTD=y
CONFIG_BOOT_CONFIG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LD_ORPHAN_WARN=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HAVE_FUTEX_CMPXCHG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BPF_LSM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BPF_SYSCALL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BPF_JIT_ALWAYS_ON=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_USERMODE_DRIVER=y
# CONFIG_BPF_PRELOAD is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_KCMP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PC104=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_MEMCG_SYSFS_ON=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_COMPAT_BRK is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SLAB is not set
CONFIG_SLUB=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SLUB_CPU_PARTIAL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_ARM64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARM64_PAGE_SHIFT=12
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM64_CONT_PTE_SHIFT=4
CONFIG_ARM64_CONT_PMD_SHIFT=4
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ZONE_DMA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SMP=y
CONFIG_KERNEL_MODE_NEON=y
CONFIG_FIX_EARLYCON_MEM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PGTABLE_LEVELS=3
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BROKEN_GAS_INST=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Platform selection
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_ACTIONS=y
CONFIG_ARCH_AGILEX=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_SUNXI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_ALPINE=y
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_ARCH_BAIKAL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_BCM2835=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_BERLIN=y
CONFIG_ARCH_BITMAIN=y
CONFIG_ARCH_BRCMSTB=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_EXYNOS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_SPARX5=y
CONFIG_ARCH_K3=y
CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_LG1K=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_HISI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_KEEMBAY=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MVEBU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_MXC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_QCOM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_REALTEK=y
CONFIG_ARCH_RENESAS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_ROCKCHIP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_S32=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_SEATTLE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_STRATIX10=y
CONFIG_ARCH_SYNQUACER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_TEGRA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_SPRD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_THUNDER2=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_UNIPHIER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_VEXPRESS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_VISCONTI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_XGENE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_ZX=y
CONFIG_ARCH_ZYNQMP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Platform selection
#
# Kernel Features
#
#
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
CONFIG_ARM64_ERRATUM_826319=y
CONFIG_ARM64_ERRATUM_827319=y
CONFIG_ARM64_ERRATUM_824069=y
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_834220=y
CONFIG_ARM64_ERRATUM_845719=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_ARM64_ERRATUM_1024718=y
CONFIG_ARM64_ERRATUM_1418040=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM64_ERRATUM_1165522=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM64_ERRATUM_1319367=y
CONFIG_ARM64_ERRATUM_1530923=y
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM64_ERRATUM_1286807=y
CONFIG_ARM64_ERRATUM_1463225=y
CONFIG_ARM64_ERRATUM_1542419=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM64_ERRATUM_1508412=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAVIUM_ERRATUM_22375=y
CONFIG_CAVIUM_ERRATUM_23144=y
CONFIG_CAVIUM_ERRATUM_23154=y
CONFIG_CAVIUM_ERRATUM_27456=y
CONFIG_CAVIUM_ERRATUM_30115=y
CONFIG_CAVIUM_TX2_ERRATUM_219=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FUJITSU_ERRATUM_010001=y
CONFIG_HISILICON_ERRATUM_161600802=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
CONFIG_QCOM_FALKOR_ERRATUM_1009=y
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SOCIONEXT_SYNQUACER_PREITS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of ARM errata workarounds via the alternatives framework
CONFIG_ARM64_4K_PAGES=y
# CONFIG_ARM64_16K_PAGES is not set
# CONFIG_ARM64_64K_PAGES is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM64_VA_BITS_39=y
# CONFIG_ARM64_VA_BITS_48 is not set
CONFIG_ARM64_VA_BITS=39
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM64_PA_BITS_48=y
CONFIG_ARM64_PA_BITS=48
# CONFIG_CPU_BIG_ENDIAN is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CPU_LITTLE_ENDIAN=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCHED_MC=y
CONFIG_SCHED_SMT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NR_CPUS=4096
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HOTPLUG_CPU=y
CONFIG_NUMA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NODES_SHIFT=10
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_HOLES_IN_ZONE=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCHED_HRTICK=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_PARAVIRT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
# CONFIG_KEXEC_SIG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRASH_DUMP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XEN_DOM0=y
CONFIG_XEN=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_UNMAP_KERNEL_AT_EL0=y
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
CONFIG_ARM64_SW_TTBR0_PAN=y
CONFIG_ARM64_TAGGED_ADDR_ABI=y
CONFIG_COMPAT=y
CONFIG_KUSER_HELPERS=y
CONFIG_ARMV8_DEPRECATED=y
CONFIG_SWP_EMULATION=y
CONFIG_CP15_BARRIER_EMULATION=y
CONFIG_SETEND_EMULATION=y
#
# ARMv8.1 architectural features
#
CONFIG_ARM64_HW_AFDBM=y
CONFIG_ARM64_PAN=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM64_USE_LSE_ATOMICS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM64_VHE=y
# end of ARMv8.1 architectural features
#
# ARMv8.2 architectural features
#
CONFIG_ARM64_UAO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ARM64_PMEM is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM64_RAS_EXTN=y
CONFIG_ARM64_CNP=y
# end of ARMv8.2 architectural features
#
# ARMv8.3 architectural features
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AS_HAS_CFI_NEGATE_RA_STATE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of ARMv8.3 architectural features
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# ARMv8.4 architectural features
#
CONFIG_ARM64_AMU_EXTN=y
# end of ARMv8.4 architectural features
#
# ARMv8.5 architectural features
#
CONFIG_ARM64_BTI=y
CONFIG_ARM64_E0PD=y
CONFIG_ARCH_RANDOM=y
# end of ARMv8.5 architectural features
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM64_SVE=y
CONFIG_ARM64_MODULE_PLTS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM64_PSEUDO_NMI=y
# CONFIG_ARM64_DEBUG_PRIORITY_MASKING is not set
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Kernel Features
#
# Boot options
#
CONFIG_ARM64_ACPI_PARKING_PROTOCOL=y
CONFIG_CMDLINE=""
CONFIG_EFI_STUB=y
CONFIG_EFI=y
CONFIG_DMI=y
# end of Boot options
CONFIG_SYSVIPC_COMPAT=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PM=y
CONFIG_PM_DEBUG=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PM_ADVANCED_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ENERGY_MODEL is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# end of Power management options
#
# CPU Power Management
#
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_DT_IDLE_STATES=y
#
# ARM CPU Idle Drivers
#
CONFIG_ARM_CPUIDLE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_PSCI_CPUIDLE=y
CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of ARM CPU Idle Drivers
# end of CPU Idle
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=m
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_ACPI_CPPC_CPUFREQ=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM_ARMADA_37XX_CPUFREQ=m
CONFIG_ARM_ARMADA_8K_CPUFREQ=m
CONFIG_ARM_SCPI_CPUFREQ=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_BRCMSTB_AVS_CPUFREQ=m
CONFIG_ARM_IMX6Q_CPUFREQ=m
CONFIG_ARM_IMX_CPUFREQ_DT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM_MEDIATEK_CPUFREQ=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_QCOM_CPUFREQ_NVMEM=m
CONFIG_ARM_QCOM_CPUFREQ_HW=m
CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_SCMI_CPUFREQ=m
CONFIG_ARM_TEGRA20_CPUFREQ=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM_TEGRA124_CPUFREQ=y
CONFIG_ARM_TEGRA186_CPUFREQ=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_TEGRA194_CPUFREQ=y
CONFIG_QORIQ_CPUFREQ=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of CPU Frequency scaling
# end of CPU Power Management
#
# Firmware Drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_SCMI_PROTOCOL=m
CONFIG_ARM_SCMI_POWER_DOMAIN=m
CONFIG_ARM_SCPI_PROTOCOL=m
CONFIG_ARM_SCPI_POWER_DOMAIN=m
CONFIG_ARM_SDE_INTERFACE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_ISCSI_IBFT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RASPBERRYPI_FIRMWARE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INTEL_STRATIX10_SERVICE=m
CONFIG_INTEL_STRATIX10_RSU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QCOM_SCM=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_TURRIS_MOX_RWTM=m
CONFIG_TEE_BNXT_FW=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EFI_VARS_PSTORE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EFI_SOFT_RESERVE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EFI_PARAMS_FROM_FDT=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EFI_GENERIC_STUB=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EFI_ARMSTUB_DTB_LOADER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EFI_BOOTLOADER_CONTROL=m
CONFIG_EFI_CAPSULE_LOADER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EFI_TEST=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_RESET_ATTACK_MITIGATION is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_EFI_DISABLE_PCI_DMA is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_ARM=y
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IMX_DSP=m
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MESON_SM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_PSCI_FW=y
# CONFIG_ARM_PSCI_CHECKER is not set
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
CONFIG_ARM_SMCCC_SOC_ID=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Tegra firmware driver
#
CONFIG_TEGRA_IVC=y
CONFIG_TEGRA_BPMP=y
# end of Tegra firmware driver
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# Zynq MPSoC Firmware Drivers
#
CONFIG_ZYNQMP_FIRMWARE=y
# CONFIG_ZYNQMP_FIRMWARE_DEBUG is not set
# end of Zynq MPSoC Firmware Drivers
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Firmware Drivers
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_GENERIC_GSI=y
CONFIG_ACPI_CCA_REQUIRED=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_MCFG=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ACPI_NUMA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_ACPI_APEI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ACPI_APEI_GHES=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ACPI_APEI_PCIEAER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ACPI_APEI_SEA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_ACPI_WATCHDOG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ACPI_CONFIGFS=m
CONFIG_ACPI_IORT=y
CONFIG_ACPI_GTDT=y
CONFIG_ACPI_PPTT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PMIC_OPREGION is not set
CONFIG_TPS68470_PMIC_OPREGION=y
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
CONFIG_KVM_ARM_PMU=y
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA256_ARM64=m
CONFIG_CRYPTO_SHA512_ARM64=m
CONFIG_CRYPTO_SHA1_ARM64_CE=m
CONFIG_CRYPTO_SHA2_ARM64_CE=m
CONFIG_CRYPTO_SHA512_ARM64_CE=m
CONFIG_CRYPTO_SHA3_ARM64=m
CONFIG_CRYPTO_SM3_ARM64_CE=m
CONFIG_CRYPTO_SM4_ARM64_CE=m
CONFIG_CRYPTO_GHASH_ARM64_CE=m
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64=m
CONFIG_CRYPTO_AES_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64_CE_CCM=m
CONFIG_CRYPTO_AES_ARM64_CE_BLK=m
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
CONFIG_CRYPTO_CHACHA20_NEON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_POLY1305_NEON=m
CONFIG_CRYPTO_NHPOLY1305_NEON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_AES_ARM64_BS=m
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SET_FS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HAVE_ARCH_SECCOMP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SECCOMP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HAVE_MOVE_PMD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=18
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HAVE_ARCH_COMPILER_H=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_HAS_RELR=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MODULE_FORCE_LOAD is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MODULE_UNLOAD=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MODULE_FORCE_UNLOAD is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MODULE_SIG_ALL is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
# CONFIG_MODULE_COMPRESS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_UNUSED_SYMBOLS=y
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_SCSI_REQUEST=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_CGROUP_RWSTAT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_DEV_THROTTLING=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_CMDLINE_PARSER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_WBT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_BLK_CGROUP_IOLATENCY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_CGROUP_IOCOST=y
CONFIG_BLK_WBT_MQ=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AIX_PARTITION=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MINIX_SUBPARTITION=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
#
# IO Schedulers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
Tune kernel interactivity Change PREEMPT to PREEMPT_VOLUNTARY: it is a more in the middle interactivity which should be OK for both servers and desktops, Void Linux and Ubuntu have it. Previous value was too much preemption.
2021-02-23 14:57:41 +03:00
CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK=y
CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_READ_LOCK=y
CONFIG_ARCH_INLINE_READ_LOCK_BH=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_READ_UNLOCK=y
CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_WRITE_LOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_SPIN_TRYLOCK=y
CONFIG_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_INLINE_SPIN_LOCK=y
CONFIG_INLINE_SPIN_LOCK_BH=y
CONFIG_INLINE_SPIN_LOCK_IRQ=y
CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_INLINE_SPIN_UNLOCK_BH=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_READ_LOCK=y
CONFIG_INLINE_READ_LOCK_BH=y
CONFIG_INLINE_READ_LOCK_IRQ=y
CONFIG_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_BH=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_INLINE_WRITE_LOCK=y
CONFIG_INLINE_WRITE_LOCK_BH=y
CONFIG_INLINE_WRITE_LOCK_IRQ=y
CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_BH=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_HAVE_ELF_PROT=y
CONFIG_ARCH_USE_GNU_PROPERTY=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
Tune kernel config: * disable Atom ISP as recommended by RussianNeuroMancer because it does not make cameras work on x86 Intel-based tablets where cameras are connected on i2c bus, but makes the camera consome power without working * enable zswap by default and use the default allocator as in Arch Linux where zswap is enabled by default https://wiki.archlinux.org/index.php/Zswap * tune values of sysctls from le9 patch to make it have at least some effect on typical desktop and server systems but avoid too agressive OOM killer on systems with 2 GB RAM and less where OOM killer kills too many process See discussion and my comments in the thread https://www.linux.org.ru/news/kernel/16052362 * remove not used variant of the patch which did not have any effect
2020-12-27 15:49:15 +03:00
CONFIG_UNEVICTABLE_ACTIVEFILE=y
CONFIG_UNEVICTABLE_ACTIVEFILE_KBYTES_LOW=102400
CONFIG_UNEVICTABLE_ACTIVEFILE_KBYTES_MIN=51200
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NUMA_KEEP_MEMINFO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEMORY_ISOLATION=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MEMORY_HOTREMOVE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PAGE_REPORTING=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BOUNCE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HWPOISON_INJECT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TRANSPARENT_HUGEPAGE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD=y
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="zstd"
Tune kernel config: * disable Atom ISP as recommended by RussianNeuroMancer because it does not make cameras work on x86 Intel-based tablets where cameras are connected on i2c bus, but makes the camera consome power without working * enable zswap by default and use the default allocator as in Arch Linux where zswap is enabled by default https://wiki.archlinux.org/index.php/Zswap * tune values of sysctls from le9 patch to make it have at least some effect on typical desktop and server systems but avoid too agressive OOM killer on systems with 2 GB RAM and less where OOM killer kills too many process See discussion and my comments in the thread https://www.linux.org.ru/news/kernel/16052362 * remove not used variant of the patch which did not have any effect
2020-12-27 15:49:15 +03:00
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
Tune kernel config: * disable Atom ISP as recommended by RussianNeuroMancer because it does not make cameras work on x86 Intel-based tablets where cameras are connected on i2c bus, but makes the camera consome power without working * enable zswap by default and use the default allocator as in Arch Linux where zswap is enabled by default https://wiki.archlinux.org/index.php/Zswap * tune values of sysctls from le9 patch to make it have at least some effect on typical desktop and server systems but avoid too agressive OOM killer on systems with 2 GB RAM and less where OOM killer kills too many process See discussion and my comments in the thread https://www.linux.org.ru/news/kernel/16052362 * remove not used variant of the patch which did not have any effect
2020-12-27 15:49:15 +03:00
CONFIG_ZSWAP_ZPOOL_DEFAULT="z3fold"
CONFIG_ZSWAP_DEFAULT_ON=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
Tune kernel config: * disable Atom ISP as recommended by RussianNeuroMancer because it does not make cameras work on x86 Intel-based tablets where cameras are connected on i2c bus, but makes the camera consome power without working * enable zswap by default and use the default allocator as in Arch Linux where zswap is enabled by default https://wiki.archlinux.org/index.php/Zswap * tune values of sysctls from le9 patch to make it have at least some effect on typical desktop and server systems but avoid too agressive OOM killer on systems with 2 GB RAM and less where OOM killer kills too many process See discussion and my comments in the thread https://www.linux.org.ru/news/kernel/16052362 * remove not used variant of the patch which did not have any effect
2020-12-27 15:49:15 +03:00
CONFIG_Z3FOLD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
CONFIG_HMM_MIRROR=y
CONFIG_DEVICE_PRIVATE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_READ_ONLY_THP_FOR_FS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PACKET=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TLS_TOE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
CONFIG_XFRM_INTERFACE=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
CONFIG_XDP_SOCKETS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XDP_SOCKETS_DIAG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IP_PNP is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_INET_ESPINTCP is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IPV6=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_INET6_ESPINTCP is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
CONFIG_IPV6_RPL_LWTUNNEL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NETLABEL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=m
CONFIG_MPTCP_IPV6=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NETWORK_PHY_TIMESTAMPING=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_LOG_NETDEV=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_NF_CONNTRACK_PROCFS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_FLOW_OFFLOAD=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_TUNNEL=m
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_XFRM=m
CONFIG_NFT_SOCKET=m
CONFIG_NFT_OSF=m
CONFIG_NFT_TPROXY=m
CONFIG_NFT_SYNPROXY=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_MH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_FLOW_TABLE_IPV4=m
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_FLOW_TABLE_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_SRH=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
# end of DECnet: Netfilter Configuration
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_LOG_BRIDGE=m
CONFIG_NF_CONNTRACK_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_BPFILTER=y
CONFIG_BPFILTER_UMH=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IP_DCCP_CCID3 is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_IB=y
CONFIG_TIPC_MEDIA_UDP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TIPC_CRYPTO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ATM_BR2684_IPFILTER is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BRIDGE_MRP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_8021Q=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_DSA_TAG_AR9331=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_DSA_TAG_BRCM_COMMON=m
CONFIG_NET_DSA_TAG_BRCM=m
CONFIG_NET_DSA_TAG_BRCM_PREPEND=m
CONFIG_NET_DSA_TAG_GSWIP=m
CONFIG_NET_DSA_TAG_DSA=m
CONFIG_NET_DSA_TAG_EDSA=m
CONFIG_NET_DSA_TAG_MTK=m
CONFIG_NET_DSA_TAG_KSZ=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_DSA_TAG_RTL4_A=m
CONFIG_NET_DSA_TAG_OCELOT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_DSA_TAG_QCA=m
CONFIG_NET_DSA_TAG_LAN9303=m
CONFIG_NET_DSA_TAG_SJA1105=m
CONFIG_NET_DSA_TAG_TRAILER=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DECNET_ROUTER is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IPDDP is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_PHONET=m
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
# CONFIG_6LOWPAN_GHC_UDP is not set
# CONFIG_6LOWPAN_GHC_ICMPV6 is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
CONFIG_IEEE802154=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_CBS=m
CONFIG_NET_SCH_ETF=m
CONFIG_NET_SCH_TAPRIO=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_SKBPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_SCH_FQ_PIE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_SCH_ETS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_CLS_U32_PERF is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_CLS_CGROUP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_EMATCH_IPSET=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_EMATCH_IPT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_MPLS=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CTINFO=m
CONFIG_NET_ACT_SKBMOD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_NET_ACT_IFE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_CT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_ACT_GATE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DNS_RESOLVER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUGFS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_BATMAN_ADV_SYSFS=y
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VSOCKETS_LOOPBACK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=m
CONFIG_HSR=m
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
CONFIG_QRTR_MHI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_DROP_MONITOR=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Network testing
# end of Networking options
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
# end of AX.25 network device drivers
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_VXCAN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_FLEXCAN=m
CONFIG_CAN_GRCAN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAN_JANZ_ICAN3=m
CONFIG_CAN_KVASER_PCIEFD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_XILINXCAN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
CONFIG_CAN_IFI_CANFD=m
CONFIG_CAN_M_CAN=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_M_CAN_PLATFORM=m
CONFIG_CAN_M_CAN_TCAN4X5X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAN_PEAK_PCIEFD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_RCAR=m
CONFIG_CAN_RCAR_CANFD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_EMS_PCMCIA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_F81601=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PEAK_PCMCIA=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m
#
# CAN SPI interfaces
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_HI311X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAN_MCP251X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_MCP251XFD=m
# CONFIG_CAN_MCP251XFD_SANITY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_MCBA_USB=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAN_PEAK_USB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAN_UCAN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_DEBUGFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_QCA=m
CONFIG_BT_HCIBTUSB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BT_HCIBTUSB_BCM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BT_HCIBTUSB_MTK=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_RTL=y
CONFIG_BT_HCIUART_QCA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BT_MTKSDIO=m
CONFIG_BT_MTKUART=m
CONFIG_BT_QCOMSMD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BT_HCIRSI=m
# end of Bluetooth device drivers
CONFIG_AF_RXRPC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AF_RXRPC_IPV6=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_NL80211_TESTMODE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAC80211_DEBUGFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_WIMAX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_XEN=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NFC_SHDLC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
CONFIG_NFC_FDP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN532_UART=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
CONFIG_NFC_MRVL_UART=m
CONFIG_NFC_MRVL_I2C=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NFC_MRVL_SPI=m
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
CONFIG_NFC_ST_NCI_SPI=m
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NFC_ST95HF=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Near Field Communication (NFC) devices
CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_FAILOVER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ETHTOOL_NETLINK=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
CONFIG_ARM_AMBA=y
CONFIG_TEGRA_AHB=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCIE_EDR=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_BRIDGE_EMUL=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PCI_P2PDMA is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PCI_LABEL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HOTPLUG_PCI_SHPC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# PCI controller drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCI_AARDVARK=m
CONFIG_PCIE_XILINX_NWL=y
CONFIG_PCI_FTPCI100=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PCI_TEGRA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCIE_RCAR=y
CONFIG_PCIE_RCAR_HOST=y
CONFIG_PCIE_RCAR_EP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PCI_HOST_COMMON=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCI_HOST_GENERIC=m
CONFIG_PCIE_XILINX=y
CONFIG_PCIE_XILINX_CPM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PCI_XGENE=y
CONFIG_PCI_XGENE_MSI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCIE_IPROC=m
CONFIG_PCIE_IPROC_PLATFORM=m
CONFIG_PCIE_IPROC_MSI=y
CONFIG_PCIE_ALTERA=m
CONFIG_PCIE_ALTERA_MSI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PCI_HOST_THUNDER_PEM=y
CONFIG_PCI_HOST_THUNDER_ECAM=y
CONFIG_PCIE_ROCKCHIP=y
CONFIG_PCIE_ROCKCHIP_HOST=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCIE_ROCKCHIP_EP=y
CONFIG_PCIE_MEDIATEK=m
CONFIG_PCIE_BRCMSTB=m
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_PCI_BAIKAL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCIE_HISI_ERR=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
CONFIG_PCIE_DW_PLAT_EP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCI_IMX6=y
CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_KEYSTONE_HOST=y
CONFIG_PCI_KEYSTONE_EP=y
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_LAYERSCAPE_EP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_HISI_STB=y
CONFIG_PCI_MESON=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PCIE_TEGRA194=m
CONFIG_PCIE_TEGRA194_HOST=m
CONFIG_PCIE_TEGRA194_EP=m
CONFIG_PCIE_UNIPHIER=y
CONFIG_PCIE_UNIPHIER_EP=y
CONFIG_PCIE_AL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of DesignWare PCI Core Support
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# Mobiveil PCIe Core Support
#
CONFIG_PCIE_MOBIVEIL=y
CONFIG_PCIE_MOBIVEIL_HOST=y
CONFIG_PCIE_MOBIVEIL_PLAT=y
CONFIG_PCIE_LAYERSCAPE_GEN4=y
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_EP=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
CONFIG_PCIE_CADENCE_PLAT_EP=y
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
CONFIG_PCI_J721E_EP=y
# end of Cadence PCIe controllers support
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PCI_EPF_TEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RAPIDIO_TSI721=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RAPIDIO_DISC_TIMEOUT=30
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RAPIDIO_DMA_ENGINE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_RAPIDIO_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RAPIDIO_MPORT_CDEV=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# RapidIO Switch drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RAPIDIO_TSI57X=m
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_TSI568=m
CONFIG_RAPIDIO_CPS_GEN2=m
CONFIG_RAPIDIO_RXS_GEN3=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_FW_LOADER_COMPRESS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FW_CACHE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_SOC_BUS=y
CONFIG_REGMAP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGMAP_AC97=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGMAP_I2C=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGMAP_SLIMBUS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGMAP_W1=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SCCB=m
CONFIG_REGMAP_I3C=m
CONFIG_REGMAP_SPI_AVMM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options
#
# Bus devices
#
CONFIG_ARM_CCI=y
CONFIG_ARM_CCI400_COMMON=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BRCMSTB_GISB_ARB=y
CONFIG_MOXTET=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HISILICON_LPC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IMX_WEIM=y
CONFIG_QCOM_EBI2=y
CONFIG_SIMPLE_PM_BUS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SUN50I_DE2_BUS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SUNXI_RSB=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TEGRA_ACONNECT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TEGRA_GMI=m
CONFIG_UNIPHIER_SYSTEM_BUS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VEXPRESS_CONFIG=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FSL_MC_BUS=y
CONFIG_MHI_BUS=m
CONFIG_MHI_BUS_DEBUG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_GNSS=m
CONFIG_GNSS_SERIAL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GNSS_MTK_SERIAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GNSS_SIRF_SERIAL=m
CONFIG_GNSS_UBX_SERIAL=m
CONFIG_MTD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MTD_TESTS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_OF_PARTS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MTD_AFS_PARTS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Partition parsers
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MTD_PARTITIONED_MASTER is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# end of RAM/ROM/Flash chip drivers
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PHYSMAP_VERSATILE=y
CONFIG_MTD_PHYSMAP_GEMINI=y
CONFIG_MTD_PHYSMAP_GPIO_ADDR=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
# end of Mapping drivers for chip access
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_DATAFLASH_OTP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MTD_MCHP23K256=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MTD_DOCG3 is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Self-contained MTD device drivers
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# NAND
#
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_NAND_CORE=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MTD_ONENAND_OTP is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=m
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
CONFIG_MTD_RAW_NAND=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MTD_NAND_ECC_SW_BCH=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_PCI=m
CONFIG_MTD_NAND_DENALI_DT=m
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_MARVELL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MTD_NAND_BRCMNAND=m
CONFIG_MTD_NAND_GPMI_NAND=m
# CONFIG_MTD_NAND_FSL_IFC is not set
CONFIG_MTD_NAND_MXC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_NAND_SUNXI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MTD_NAND_HISI504=m
CONFIG_MTD_NAND_QCOM=m
CONFIG_MTD_NAND_MTK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_NAND_MXIC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MTD_NAND_TEGRA=m
CONFIG_MTD_NAND_MESON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_PLATFORM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MTD_NAND_CADENCE=m
CONFIG_MTD_NAND_ARASAN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Misc
#
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_SPI_NAND=m
#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
# end of ECC engine support
# end of NAND
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# end of LPDDR & LPDDR2 PCM memory drivers
CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_SPI_HISI_SFC=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_HYPERBUS=m
CONFIG_HBMC_AM654=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_OF_NUMA=y
CONFIG_PARPORT=m
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PNP_DEBUG_MESSAGES is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_CDROM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ZRAM_WRITEBACK=y
CONFIG_ZRAM_MEMORY_TRACKING=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SKD=m
CONFIG_BLK_DEV_SX8=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_DEV_RAM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_DEV_RAM_COUNT=16
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_DEV_RAM_SIZE=65536
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_BLKDEV_BACKEND=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_RSXX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=m
CONFIG_BLK_DEV_RNBD_SERVER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# NVME Support
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
CONFIG_NVME_TCP=m
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_PASSTHRU=y
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=m
# CONFIG_NVME_TARGET_FCLOOP is not set
CONFIG_NVME_TARGET_TCP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
CONFIG_DUMMY_IRQ=m
CONFIG_PHANTOM=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_QCOM_COINCELL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCOM_FASTRPC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
# CONFIG_PCI_ENDPOINT_TEST is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XILINX_SDFEC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MISC_RTSX=m
CONFIG_PVPANIC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HISI_HIKEY_USB=m
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_TP_BMC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_C2PORT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=m
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=m
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ECHO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HABANA_AI=m
CONFIG_UACCE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Misc devices
#
# SCSI device support
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCSI_MOD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RAID_ATTRS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCSI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_DEV_SD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHR_DEV_ST=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCSI_SCAN_ASYNC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_AIC79XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_HISI_SAS=m
CONFIG_SCSI_HISI_SAS_PCI=m
CONFIG_SCSI_MVSAS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCSI_UFS_DWC_TC_PCI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_CDNS_PLATFORM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
CONFIG_SCSI_UFS_QCOM=m
CONFIG_SCSI_UFS_MEDIATEK=m
CONFIG_SCSI_UFS_HISI=m
CONFIG_SCSI_UFS_TI_J721E=m
CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFS_EXYNOS=m
CONFIG_SCSI_UFS_CRYPTO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_MYRB=m
CONFIG_SCSI_MYRS=m
CONFIG_XEN_SCSI_FRONTEND=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_SCSI_SNIC=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCSI_FDOMAIN=m
CONFIG_SCSI_FDOMAIN_PCI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_QEDI=m
CONFIG_QEDF=m
CONFIG_SCSI_LPFC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_WD719X=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support
CONFIG_HAVE_PATA_PLATFORM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATA_VERBOSE_ERROR=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATA_FORCE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=3
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_BRCM=m
CONFIG_AHCI_IMX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AHCI_CEVA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AHCI_MTK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AHCI_MVEBU=m
CONFIG_AHCI_SUNXI=m
CONFIG_AHCI_TEGRA=m
CONFIG_AHCI_XGENE=m
CONFIG_AHCI_QORIQ=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SATA_AHCI_SEATTLE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATA_PIIX=y
CONFIG_SATA_DWC=m
CONFIG_SATA_DWC_OLD_DMA=y
# CONFIG_SATA_DWC_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SATA_RCAR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IMX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PATA_SIS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PLATFORM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PATA_OF_PLATFORM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PATA_RZ1000=m
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATA_GENERIC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_DEV_DM_BUILTIN=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BLK_DEV_DM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DM_EBS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DM_ERA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DM_CLONE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DM_MULTIPATH_HST=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DM_DELAY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DM_DUST is not set
CONFIG_DM_INIT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DM_ZONED=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TARGET_CXGB4=m
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# end of IEEE 1394 (FireWire) support
CONFIG_NETDEVICES=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MII=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN_L3S=y
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BAREUDP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GTP=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TUN=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NET_VRF=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VSOCKMON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SUNGEM_PHY=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_NICSTAR=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATM_HE_USE_SUNI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATM_SOLOS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAIF_DRIVERS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAIF_TTY=m
CONFIG_CAIF_HSI=m
CONFIG_CAIF_VIRTIO=m
#
# Distributed Switch Architecture drivers
#
CONFIG_B53=m
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
CONFIG_B53_SERDES=m
CONFIG_NET_DSA_BCM_SF2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_NET_DSA_LOOP is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_DSA_LANTIQ_GSWIP=m
CONFIG_NET_DSA_MT7530=m
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m
CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m
CONFIG_NET_DSA_MICROCHIP_KSZ8795=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_MV88E6XXX_PTP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_DSA_MSCC_FELIX=m
CONFIG_NET_DSA_MSCC_SEVILLE=m
CONFIG_NET_DSA_AR9331=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_DSA_SJA1105=m
# CONFIG_NET_DSA_SJA1105_PTP is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_DSA_QCA8K=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_DSA_REALTEK_SMI=m
CONFIG_NET_DSA_SMSC_LAN9303=m
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_DSA_VITESSE_VSC73XX=m
CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m
CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Distributed Switch Architecture drivers
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=m
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=m
CONFIG_NET_VENDOR_ALLWINNER=y
CONFIG_SUN4I_EMAC=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_ALTERA_TSE=m
CONFIG_NET_VENDOR_AMAZON=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ENA_ETHERNET=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_AMD_XGBE=m
CONFIG_AMD_XGBE_DCB=y
CONFIG_NET_XGENE=m
CONFIG_NET_XGENE_V2=m
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=m
CONFIG_NET_VENDOR_ARC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARC_EMAC_CORE=m
CONFIG_EMAC_ROCKCHIP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_AURORA=y
CONFIG_AURORA_NB8800=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCMGENET=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BGMAC=m
CONFIG_BGMAC_PLATFORM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SYSTEMPORT=m
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
CONFIG_BNXT_HWMON=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MACB_PCI=m
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_THUNDER_NIC_PF=m
CONFIG_THUNDER_NIC_VF=m
CONFIG_THUNDER_NIC_BGX=m
CONFIG_THUNDER_NIC_RGX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CAVIUM_PTP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LIQUIDIO=m
CONFIG_LIQUIDIO_VF=m
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHELSIO_T4_DCB=y
CONFIG_CHELSIO_T4_FCOE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_CHELSIO_IPSEC_INLINE=m
CONFIG_CHELSIO_TLS_DEVICE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_NET_VENDOR_CORTINA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GEMINI_ETHERNET=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_EZCHIP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=m
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC=m
CONFIG_FSL_FMAN=m
CONFIG_DPAA_ERRATUM_A050385=y
CONFIG_FSL_PQ_MDIO=m
CONFIG_FSL_XGMAC_MDIO=m
CONFIG_GIANFAR=m
CONFIG_FSL_DPAA_ETH=m
CONFIG_FSL_DPAA2_ETH=m
CONFIG_FSL_DPAA2_ETH_DCB=y
CONFIG_FSL_DPAA2_PTP_CLOCK=m
CONFIG_FSL_ENETC=m
CONFIG_FSL_ENETC_VF=m
CONFIG_FSL_ENETC_MDIO=m
CONFIG_FSL_ENETC_PTP_CLOCK=m
CONFIG_FSL_ENETC_QOS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_GVE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_HISILICON=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HIX5HD2_GMAC=m
CONFIG_HISI_FEMAC=m
CONFIG_HIP04_ETH=m
CONFIG_HI13X1_GMAC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HNS_MDIO=m
CONFIG_HNS=m
CONFIG_HNS_DSAF=m
CONFIG_HNS_ENET=m
CONFIG_HNS3=m
CONFIG_HNS3_HCLGE=m
CONFIG_HNS3_DCB=y
CONFIG_HNS3_HCLGEVF=m
CONFIG_HNS3_ENET=m
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_HINIC=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_IPSEC=y
CONFIG_IXGBEVF=m
CONFIG_IXGBEVF_IPSEC=y
CONFIG_I40E=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I40E_DCB=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IAVF=m
CONFIG_I40EVF=m
CONFIG_ICE=m
CONFIG_FM10K=m
CONFIG_IGC=m
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_MVNETA=m
CONFIG_MVPP2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MVPP2_PTP=y
CONFIG_PXA168_ETH=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SKGE_GENESIS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_OCTEONTX2_MBOX=m
CONFIG_OCTEONTX2_AF=m
CONFIG_NDC_DIS_DYNAMIC_CACHING=y
CONFIG_OCTEONTX2_PF=m
CONFIG_OCTEONTX2_VF=m
CONFIG_PRESTERA=m
CONFIG_PRESTERA_PCI=m
CONFIG_NET_VENDOR_MEDIATEK=y
CONFIG_NET_MEDIATEK_SOC=m
CONFIG_NET_MEDIATEK_STAR_EMAC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
CONFIG_MLX5_ACCEL=y
CONFIG_MLX5_FPGA=y
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
CONFIG_MLX5_ESWITCH=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MLX5_CLS_ACT=y
CONFIG_MLX5_TC_CT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MLX5_CORE_EN_DCB=y
CONFIG_MLX5_CORE_IPOIB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MLX5_FPGA_IPSEC is not set
CONFIG_MLX5_IPSEC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MLX5_EN_IPSEC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MLX5_FPGA_TLS is not set
# CONFIG_MLX5_TLS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MLX5_SW_STEERING=y
CONFIG_MLXSW_CORE=m
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_PCI=m
CONFIG_MLXSW_I2C=m
CONFIG_MLXSW_SWITCHIB=m
CONFIG_MLXSW_SWITCHX2=m
CONFIG_MLXSW_SPECTRUM=m
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_MINIMAL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MLXFW=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ENCX24J600=m
CONFIG_LAN743X=m
CONFIG_NET_VENDOR_MICROSEMI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MSCC_OCELOT_SWITCH_LIB=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MSCC_OCELOT_SWITCH=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
CONFIG_NFP_APP_FLOWER=y
CONFIG_NFP_APP_ABM_NIC=y
# CONFIG_NFP_DEBUG is not set
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=m
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_IONIC=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QED_RDMA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_QED_OOO=y
CONFIG_NET_VENDOR_QUALCOMM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCA7000=m
CONFIG_QCA7000_SPI=m
CONFIG_QCA7000_UART=m
CONFIG_QCOM_EMAC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RMNET=m
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SH_ETH=m
CONFIG_RAVB=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=m
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=m
CONFIG_SFC_FALCON_MTD=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC91X=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC911X=m
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_SOCIONEXT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SNI_AVE=m
CONFIG_SNI_NETSEC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_STMICRO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_STMMAC_ETH=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_STMMAC_SELFTESTS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_STMMAC_PLATFORM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DWMAC_DWC_QOS_ETH=m
CONFIG_DWMAC_GENERIC=m
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_DWMAC_BAIKAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DWMAC_IPQ806X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DWMAC_MEDIATEK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DWMAC_MESON=m
CONFIG_DWMAC_QCOM_ETHQOS=m
CONFIG_DWMAC_ROCKCHIP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DWMAC_SOCFPGA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DWMAC_SUNXI=m
CONFIG_DWMAC_SUN8I=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DWMAC_IMX8=m
CONFIG_DWMAC_INTEL_PLAT=m
# CONFIG_STMMAC_PCI is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=m
CONFIG_DWC_XLGMAC_PCI=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TI_DAVINCI_MDIO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_TI_CPSW_PHY_SEL is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TI_K3_AM65_CPSW_NUSS=m
CONFIG_TI_K3_AM65_CPTS=m
CONFIG_TI_AM65_CPSW_TAS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIA_RHINE_MMIO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NET_VENDOR_XILINX=y
CONFIG_XILINX_AXI_EMAC=m
CONFIG_XILINX_LL_TEMAC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_HIPPI is not set
CONFIG_QCOM_IPA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NET_SB1000=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHYLINK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SFP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MESON_GXL_PHY=m
CONFIG_ADIN_PHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AQUANTIA_PHY=m
CONFIG_AX88796B_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BROADCOM_PHY=m
CONFIG_BCM54140_PHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BCM7XXX_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BCM84881_PHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BCM87XX_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BCM_CYGNUS_PHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BCM_NET_PHYLIB=m
CONFIG_CICADA_PHY=m
CONFIG_CORTINA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LXT_PHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INTEL_XWAY_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_MARVELL_10G_PHY=m
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MICROCHIP_T1_PHY=m
CONFIG_MICROSEMI_PHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NATIONAL_PHY=m
CONFIG_NXP_TJA11XX_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AT803X_PHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_RENESAS_PHY=m
CONFIG_ROCKCHIP_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
CONFIG_TERANETICS_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DP83822_PHY=m
CONFIG_DP83TC811_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
CONFIG_DP83869_PHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VITESSE_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XILINX_GMII2RGMII=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MICREL_KS8995MA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_SUN4I=m
CONFIG_MDIO_XGENE=m
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_BCM_IPROC=y
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MDIO_CAVIUM=m
CONFIG_MDIO_GPIO=m
CONFIG_MDIO_HISI_FEMAC=m
CONFIG_MDIO_I2C=m
CONFIG_MDIO_MVUSB=m
CONFIG_MDIO_MSCC_MIIM=m
CONFIG_MDIO_OCTEON=m
CONFIG_MDIO_IPQ4019=m
CONFIG_MDIO_IPQ8064=m
CONFIG_MDIO_THUNDER=m
#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
CONFIG_MDIO_BUS_MUX_MESON_G12A=m
CONFIG_MDIO_BUS_MUX_BCM_IPROC=y
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=m
CONFIG_MDIO_BUS_MUX_MMIOREG=m
#
# PCS device drivers
#
CONFIG_PCS_XPCS=m
CONFIG_PCS_LYNX=m
# end of PCS device drivers
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PLIP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PPP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SLHC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_USB_NET_AQC111=m
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ATH5K_TRACER is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATH9K_COMMON_DEBUG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
# CONFIG_ATH9K_DYNACK is not set
CONFIG_ATH9K_WOW=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_PCI_NO_EEPROM=m
CONFIG_ATH9K_HTC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATH9K_HTC_DEBUGFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATH9K_HWRNG=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATH9K_COMMON_SPECTRAL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_CARL9170_DEBUGFS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_ATH6KL_TRACING is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_WIL6210_DEBUGFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATH10K_AHB=y
CONFIG_ATH10K_SDIO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ATH10K_USB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATH10K_SNOC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_ATH10K_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_SPECTRAL=y
CONFIG_ATH10K_TRACING=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_WCN36XX=m
# CONFIG_WCN36XX_DEBUGFS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATH11K=m
CONFIG_ATH11K_AHB=m
CONFIG_ATH11K_PCI=m
# CONFIG_ATH11K_DEBUG is not set
CONFIG_ATH11K_DEBUGFS=y
CONFIG_ATH11K_TRACING=y
CONFIG_ATH11K_SPECTRAL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_B43_SDIO is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BRCM_TRACING=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO_CS=m
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IPW2100_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IWLEGACY_DEBUGFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of iwl3945 / iwl4965 Debugging Options
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Debugging Options
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_HERMES=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_HERMES_PRISM is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LIBERTAS_MESH=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_MT76_CORE=m
CONFIG_MT76_LEDS=y
CONFIG_MT76_USB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MT76_SDIO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MT76x02_LIB=m
CONFIG_MT76x02_USB=m
CONFIG_MT76x0_COMMON=m
CONFIG_MT76x0U=m
CONFIG_MT76x0E=m
CONFIG_MT76x2_COMMON=m
CONFIG_MT76x2E=m
CONFIG_MT76x2U=m
CONFIG_MT7603E=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MT7615_COMMON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MT7615E=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MT7622_WMAC=y
CONFIG_MT7663_USB_SDIO_COMMON=m
CONFIG_MT7663U=m
CONFIG_MT7663S=m
CONFIG_MT7915E=m
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WILC1000=m
CONFIG_WILC1000_SDIO=m
CONFIG_WILC1000_SPI=m
CONFIG_WILC1000_HW_OOB_INTR=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_RT2X00_LIB_DEBUGFS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
CONFIG_RTL8XXXU=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTL8XXXU_UNTESTED=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTW88=m
CONFIG_RTW88_CORE=m
CONFIG_RTW88_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTW88_8822B=m
CONFIG_RTW88_8822C=m
CONFIG_RTW88_8723D=m
CONFIG_RTW88_8821C=m
CONFIG_RTW88_8822BE=m
CONFIG_RTW88_8822CE=m
CONFIG_RTW88_8723DE=m
CONFIG_RTW88_8821CE=m
CONFIG_RTW88_DEBUG=y
CONFIG_RTW88_DEBUGFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_RSI_DEBUGFS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RSI_SDIO=m
CONFIG_RSI_USB=m
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_CW1200_WLAN_SPI=m
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SPI=m
CONFIG_WLCORE_SDIO=m
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_QTNFMAC=m
CONFIG_QTNFMAC_PCIE=m
CONFIG_PCMCIA_RAYCS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_MAC80211_HWSIM=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_VIRT_WIFI=m
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of WiMAX Wireless Broadband devices
CONFIG_WAN=y
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_FARSYNC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FSL_UCC_HDLC=m
CONFIG_SLIC_DS26522=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_AT86RF230=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IEEE802154_AT86RF230_DEBUGFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IEEE802154_MRF24J40=m
CONFIG_IEEE802154_CC2520=m
CONFIG_IEEE802154_ATUSB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IEEE802154_ADF7242=m
CONFIG_IEEE802154_CA8210=m
CONFIG_IEEE802154_CA8210_DEBUGFS=y
CONFIG_IEEE802154_MCR20A=m
CONFIG_IEEE802154_HWSIM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_NETDEV_BACKEND=m
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB4_NET=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
CONFIG_ISDN=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ISDN_CAPI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_HDLC=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_NVM=y
CONFIG_NVM_PBLK=m
# CONFIG_NVM_PBLK_DEBUG is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_EVDEV=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_ADP5520=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEYBOARD_QT1050=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
CONFIG_KEYBOARD_DLINK_DIR685=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEYBOARD_SNVS_PWRKEY=m
CONFIG_KEYBOARD_IMX=m
CONFIG_KEYBOARD_IMX_SC_KEY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KEYBOARD_NEWTON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEYBOARD_TEGRA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEYBOARD_STMPE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KEYBOARD_SUN4I_LRADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEYBOARD_IQS62X=m
CONFIG_KEYBOARD_OMAP4=m
CONFIG_KEYBOARD_TC3589X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEYBOARD_TWL4030=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_CROS_EC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEYBOARD_CAP11XX=m
CONFIG_KEYBOARD_BCM=m
CONFIG_KEYBOARD_MTK_PMIC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_MOUSE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MOUSE_PS2=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MOUSE_PS2_SENTELIC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_JOYSTICK_ADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=m
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_JOYSTICK_PSXPAD_SPI=m
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PXRC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_JOYSTICK_FSIA6B=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_88PM860X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_AR1021_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_BU21029=m
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m
CONFIG_TOUCHSCREEN_CY8CTMA140=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_DA9034=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_DA9052=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
CONFIG_TOUCHSCREEN_EXC3000=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_HIDEEP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_ILI210X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_IPROC=m
CONFIG_TOUCHSCREEN_S6SY761=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_GUNZE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
CONFIG_TOUCHSCREEN_MTOUCH=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_IMX6UL_TSC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_RASPBERRYPI_FW=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_UCB1400=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_WM831X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_PCAP=m
CONFIG_TOUCHSCREEN_RM_TS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_SILEAD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_SIS_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_ST1232=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_STMFTS=m
CONFIG_TOUCHSCREEN_STMPE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_SUN4I=m
CONFIG_TOUCHSCREEN_SUR40=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_ZET6223=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_ZFORCE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_COLIBRI_VF50=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_TOUCHSCREEN_IQS5XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TOUCHSCREEN_ZINITIX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_MISC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_88PM860X_ONKEY=m
CONFIG_INPUT_88PM80X_ONKEY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_ARIZONA_HAPTICS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_ATMEL_CAPTOUCH=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=m
CONFIG_INPUT_PM8941_PWRKEY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_PM8XXX_VIBRATOR=m
CONFIG_INPUT_MAX77650_ONKEY=m
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MAX8925_ONKEY=m
CONFIG_INPUT_MAX8997_HAPTIC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_GPIO_BEEPER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_GPIO_DECODER=m
CONFIG_INPUT_GPIO_VIBRA=m
CONFIG_INPUT_CPCAP_PWRBUTTON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_REGULATOR_HAPTIC=m
CONFIG_INPUT_RETU_PWRBUTTON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_TPS65218_PWRBUTTON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_AXP20X_PEK=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
CONFIG_INPUT_TWL6040_VIBRA=m
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PALMAS_PWRBUTTON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_PWM_VIBRA=m
CONFIG_INPUT_RK805_PWRKEY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA9052_ONKEY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_DA9055_ONKEY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_DA9063_ONKEY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_WM831X_ON=m
CONFIG_INPUT_PCAP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
CONFIG_INPUT_IMS_PCU=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_IQS269A=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
CONFIG_INPUT_DRV260X_HAPTICS=m
CONFIG_INPUT_DRV2665_HAPTICS=m
CONFIG_INPUT_DRV2667_HAPTICS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INPUT_HISI_POWERKEY=m
CONFIG_INPUT_RAVE_SP_PWRBUTTON=m
CONFIG_INPUT_SC27XX_VIBRA=m
CONFIG_INPUT_STPMIC1_ONKEY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RMI4_F34=y
CONFIG_RMI4_F3A=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_PARKBD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIO_AMBAKMI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIO_APBPS2=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIO_SUN4I_PS2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIO_GPIO_PS2=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USERIO=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_8250_PNP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_8250_16550A_VARIANTS=y
CONFIG_SERIAL_8250_FINTEK=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_8250_EXAR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_8250_CS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_8250_MEN_MCB=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_8250_ASPEED_VUART=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_8250_SHARE_IRQ=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_8250_BCM2835AUX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_8250_FSL=y
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_SERIAL_8250_DW=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_OMAP=m
CONFIG_SERIAL_8250_MT6577=m
CONFIG_SERIAL_8250_UNIPHIER=m
CONFIG_SERIAL_8250_TEGRA=m
CONFIG_SERIAL_OF_PLATFORM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Non-8250 serial port support
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_AMBA_PL010=m
CONFIG_SERIAL_AMBA_PL011=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_KGDB_NMI=y
CONFIG_SERIAL_MESON=m
CONFIG_SERIAL_SAMSUNG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_TEGRA=m
CONFIG_SERIAL_TEGRA_TCU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_MAX3100=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_IMX=m
CONFIG_SERIAL_IMX_CONSOLE=m
CONFIG_SERIAL_IMX_EARLYCON=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_SH_SCI=m
CONFIG_SERIAL_SH_SCI_NR_UARTS=18
CONFIG_SERIAL_SH_SCI_DMA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_MSM=m
CONFIG_SERIAL_QCOM_GENI=m
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
CONFIG_SERIAL_SIFIVE=m
CONFIG_SERIAL_QE=m
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_SC16IS7XX_CORE=m
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_I2C=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_SC16IS7XX_SPI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_XILINX_PS_UART=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=m
CONFIG_SERIAL_FSL_LINFLEXUART=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_CONEXANT_DIGICOLOR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_MEN_Z135=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_SPRD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_OWL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
CONFIG_NULL_TTY=m
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HVC_DCC=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HW_RANDOM_TIMERIOMEM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HW_RANDOM_BA431=m
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_OMAP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_HISI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HW_RANDOM_HISI_V2=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HW_RANDOM_XGENE=m
CONFIG_HW_RANDOM_MESON=m
CONFIG_HW_RANDOM_CAVIUM=m
CONFIG_HW_RANDOM_MTK=m
CONFIG_HW_RANDOM_EXYNOS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HW_RANDOM_OPTEE=m
CONFIG_HW_RANDOM_CCTRNG=m
CONFIG_HW_RANDOM_XIPHERA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_APPLICOM=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCR24X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IPWIRELESS=m
# end of PCMCIA character devices
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DEVMEM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RAW_DRIVER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAX_RAW_DEVS=256
CONFIG_DEVPORT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TCG_TPM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HW_RANDOM_TPM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_SPI_CR50=y
CONFIG_TCG_TIS_SYNQUACER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_XEN=m
CONFIG_TCG_CRB=y
CONFIG_TCG_VTPM_PROXY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TCG_FTPM_TEE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_TCG_TIS_ST33ZP24_SPI=m
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XILLYBUS_OF=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Character devices
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RANDOM_TRUST_CPU=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_CHARDEV=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_MUX_GPMUX=m
CONFIG_I2C_MUX_LTC4306=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_MUX_PINCTRL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_MUX_REG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_DEMUX_PINCTRL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_AMD_MP2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_HIX5HD2=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NVIDIA_GPU=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_BCM2835=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_BCM_IPROC=m
CONFIG_I2C_BRCMSTB=m
CONFIG_I2C_CADENCE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_DESIGNWARE_PLATFORM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_DESIGNWARE_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_I2C_EMEV2 is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_EXYNOS5=m
CONFIG_I2C_GPIO=m
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_IMX=m
CONFIG_I2C_IMX_LPI2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_KEMPLD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_MLXBF=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_MESON=m
CONFIG_I2C_MT65XX=m
CONFIG_I2C_MV64XXX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_NOMADIK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_OCORES=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_OMAP=m
CONFIG_I2C_OWL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PXA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_PXA_SLAVE=y
CONFIG_I2C_QCOM_CCI=m
CONFIG_I2C_QCOM_GENI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_QUP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_RIIC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_RK3X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_SH_MOBILE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_SIMTEC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_SPRD=m
CONFIG_I2C_SYNQUACER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_TEGRA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_TEGRA_BPMP=m
CONFIG_I2C_UNIPHIER=m
CONFIG_I2C_UNIPHIER_F=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_I2C_VERSATILE=m
CONFIG_I2C_THUNDERX=m
CONFIG_I2C_XILINX=m
CONFIG_I2C_XLP9XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_RCAR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_DLN2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_I2C_XGENE_SLIMPRO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_ZX2967=m
CONFIG_I2C_FSI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_I2C_SLAVE_TESTUNIT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
CONFIG_I3C=m
CONFIG_CDNS_I3C_MASTER=m
CONFIG_DW_I3C_MASTER=m
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_ARMADA_3700=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_AXI_SPI_ENGINE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_BCM_QSPI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_CADENCE_QUADSPI=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_DMA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_DW_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_DW_MMIO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_DLN2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SPI_FSI is not set
CONFIG_SPI_FSL_LPSPI=m
CONFIG_SPI_FSL_QUADSPI=m
CONFIG_SPI_HISI_SFC_V3XX=m
CONFIG_SPI_NXP_FLEXSPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_GPIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_IMX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_LM70_LLP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_FSL_LIB=m
CONFIG_SPI_FSL_SPI=m
CONFIG_SPI_FSL_DSPI=m
CONFIG_SPI_MESON_SPICC=m
CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_MT65XX=m
CONFIG_SPI_MTK_NOR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_OC_TINY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_OMAP24XX=m
CONFIG_SPI_ORION=m
CONFIG_SPI_PL022=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_RPCIF is not set
CONFIG_SPI_RSPI=m
CONFIG_SPI_QCOM_QSPI=m
CONFIG_SPI_QUP=m
CONFIG_SPI_QCOM_GENI=m
CONFIG_SPI_S3C64XX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_SC18IS602=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SH_HSPI=m
CONFIG_SPI_SIFIVE=m
CONFIG_SPI_SLAVE_MT27XX=m
CONFIG_SPI_SPRD=m
CONFIG_SPI_SPRD_ADI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_SUN4I=m
CONFIG_SPI_SUN6I=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_SYNQUACER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_MXIC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_TEGRA114=m
CONFIG_SPI_TEGRA20_SFLASH=m
CONFIG_SPI_TEGRA20_SLINK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_THUNDERX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_UNIPHIER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_XCOMM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SPI_XILINX is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_XLP=m
CONFIG_SPI_ZYNQMP_GQSPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_AMD=m
#
# SPI Multiplexer support
#
CONFIG_SPI_MUX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_LOOPBACK_TEST=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_TLE62X0=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=m
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SPI_DYNAMIC=y
CONFIG_SPMI=m
CONFIG_SPMI_MSM_PMIC_ARB=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PPS_CLIENT_KTIMER is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PTP_1588_CLOCK_DTE=m
CONFIG_PTP_1588_CLOCK_QORIQ=m
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_INES=m
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_AS3722=m
CONFIG_PINCTRL_AXP209=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_AMD=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_BM1880=y
CONFIG_PINCTRL_DA9062=m
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_MCP23S08=m
CONFIG_PINCTRL_ROCKCHIP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_SINGLE=m
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_STMFX=m
# CONFIG_PINCTRL_MAX77620 is not set
CONFIG_PINCTRL_PALMAS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_PINCTRL_RK805 is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_OCELOT=y
CONFIG_PINCTRL_OWL=y
CONFIG_PINCTRL_S500=y
# CONFIG_PINCTRL_S700 is not set
# CONFIG_PINCTRL_S900 is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_BCM2835=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_IPROC_GPIO=y
CONFIG_PINCTRL_NS2_MUX=y
CONFIG_PINCTRL_BERLIN=y
CONFIG_PINCTRL_AS370=y
CONFIG_PINCTRL_BERLIN_BG4CT=y
CONFIG_PINCTRL_IMX=m
CONFIG_PINCTRL_IMX_SCU=m
CONFIG_PINCTRL_IMX8MM=m
CONFIG_PINCTRL_IMX8MN=m
CONFIG_PINCTRL_IMX8MP=m
CONFIG_PINCTRL_IMX8MQ=m
CONFIG_PINCTRL_IMX8QM=m
CONFIG_PINCTRL_IMX8QXP=m
CONFIG_PINCTRL_IMX8DXL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_ARMADA_AP806=y
CONFIG_PINCTRL_ARMADA_CP110=y
CONFIG_PINCTRL_ARMADA_37XX=y
CONFIG_PINCTRL_MSM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_APQ8064=m
CONFIG_PINCTRL_APQ8084=m
CONFIG_PINCTRL_IPQ4019=m
CONFIG_PINCTRL_IPQ8064=m
CONFIG_PINCTRL_IPQ8074=m
CONFIG_PINCTRL_IPQ6018=m
CONFIG_PINCTRL_MSM8226=m
CONFIG_PINCTRL_MSM8660=m
CONFIG_PINCTRL_MSM8960=m
CONFIG_PINCTRL_MDM9615=m
CONFIG_PINCTRL_MSM8X74=m
CONFIG_PINCTRL_MSM8916=m
CONFIG_PINCTRL_MSM8976=m
CONFIG_PINCTRL_MSM8994=m
CONFIG_PINCTRL_MSM8996=m
CONFIG_PINCTRL_MSM8998=m
CONFIG_PINCTRL_QCS404=m
CONFIG_PINCTRL_QDF2XXX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_QCOM_SSBI_PMIC=m
CONFIG_PINCTRL_SC7180=m
CONFIG_PINCTRL_SDM660=m
CONFIG_PINCTRL_SDM845=m
CONFIG_PINCTRL_SM8150=m
CONFIG_PINCTRL_SM8250=m
#
# Renesas pinctrl drivers
#
CONFIG_PINCTRL_RENESAS=y
CONFIG_PINCTRL_SH_PFC=y
CONFIG_PINCTRL_PFC_R8A77995=y
CONFIG_PINCTRL_PFC_R8A77990=y
CONFIG_PINCTRL_PFC_R8A77950=y
CONFIG_PINCTRL_PFC_R8A77951=y
CONFIG_PINCTRL_PFC_R8A77965=y
CONFIG_PINCTRL_PFC_R8A77960=y
CONFIG_PINCTRL_PFC_R8A77961=y
CONFIG_PINCTRL_PFC_R8A77980=y
CONFIG_PINCTRL_PFC_R8A77970=y
CONFIG_PINCTRL_PFC_R8A774C0=y
CONFIG_PINCTRL_PFC_R8A774E1=y
CONFIG_PINCTRL_PFC_R8A774A1=y
CONFIG_PINCTRL_PFC_R8A774B1=y
# end of Renesas pinctrl drivers
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_SAMSUNG=y
CONFIG_PINCTRL_EXYNOS=y
CONFIG_PINCTRL_EXYNOS_ARM64=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_SPRD=m
CONFIG_PINCTRL_SPRD_SC9860=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_SUNXI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_SUN4I_A10=y
CONFIG_PINCTRL_SUN5I=y
CONFIG_PINCTRL_SUN6I_A31=y
CONFIG_PINCTRL_SUN6I_A31_R=y
CONFIG_PINCTRL_SUN8I_A23=y
CONFIG_PINCTRL_SUN8I_A33=y
CONFIG_PINCTRL_SUN8I_A83T=y
CONFIG_PINCTRL_SUN8I_A83T_R=y
CONFIG_PINCTRL_SUN8I_A23_R=y
CONFIG_PINCTRL_SUN8I_H3=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_SUN8I_H3_R=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_SUN8I_V3S=y
CONFIG_PINCTRL_SUN9I_A80=y
CONFIG_PINCTRL_SUN9I_A80_R=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_SUN50I_A64=y
CONFIG_PINCTRL_SUN50I_A64_R=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_SUN50I_A100=y
CONFIG_PINCTRL_SUN50I_A100_R=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_SUN50I_H5=y
CONFIG_PINCTRL_SUN50I_H6=y
CONFIG_PINCTRL_SUN50I_H6_R=y
CONFIG_PINCTRL_TEGRA=y
CONFIG_PINCTRL_TEGRA124=y
CONFIG_PINCTRL_TEGRA210=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_TEGRA194=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_TEGRA_XUSB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_UNIPHIER=y
CONFIG_PINCTRL_UNIPHIER_LD4=y
CONFIG_PINCTRL_UNIPHIER_PRO4=y
CONFIG_PINCTRL_UNIPHIER_SLD8=y
CONFIG_PINCTRL_UNIPHIER_PRO5=y
CONFIG_PINCTRL_UNIPHIER_PXS2=y
CONFIG_PINCTRL_UNIPHIER_LD6B=y
CONFIG_PINCTRL_UNIPHIER_LD11=y
CONFIG_PINCTRL_UNIPHIER_LD20=y
CONFIG_PINCTRL_UNIPHIER_PXS3=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# MediaTek pinctrl drivers
#
CONFIG_EINT_MTK=y
CONFIG_PINCTRL_MTK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_MTK_V2=y
CONFIG_PINCTRL_MTK_MOORE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_MTK_PARIS=y
CONFIG_PINCTRL_MT2712=y
CONFIG_PINCTRL_MT6765=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_MT6779=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_MT6797=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_MT7622=y
CONFIG_PINCTRL_MT8167=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_MT8173=y
CONFIG_PINCTRL_MT8183=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_MT8192=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_MT8516=y
CONFIG_PINCTRL_MT6397=y
# end of MediaTek pinctrl drivers
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_ZX=y
CONFIG_PINCTRL_ZX296718=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PINCTRL_MESON=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_PINCTRL_MESON_GXL=y
CONFIG_PINCTRL_MESON8_PMX=y
CONFIG_PINCTRL_MESON_AXG=y
CONFIG_PINCTRL_MESON_AXG_PMX=y
CONFIG_PINCTRL_MESON_G12A=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PINCTRL_MESON_A1=y
CONFIG_PINCTRL_LOCHNAGAR=m
CONFIG_PINCTRL_MADERA=m
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y
CONFIG_PINCTRL_CS47L92=y
CONFIG_PINCTRL_VISCONTI=y
CONFIG_PINCTRL_TMPV7700=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_GENERIC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_REGMAP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_74XX_MMIO=m
CONFIG_GPIO_ALTERA=m
CONFIG_GPIO_AMDPT=m
CONFIG_GPIO_RASPBERRYPI_EXP=m
CONFIG_GPIO_BCM_XGS_IPROC=m
CONFIG_GPIO_BRCMSTB=m
CONFIG_GPIO_CADENCE=m
CONFIG_GPIO_DAVINCI=y
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_GPIO_DWAPB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_EIC_SPRD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_EXAR=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_GRGPIO=m
CONFIG_GPIO_HLWD=m
CONFIG_GPIO_LOGICVC=m
CONFIG_GPIO_MB86S7X=m
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_MPC8XXX=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_MVEBU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_MXC=m
CONFIG_GPIO_PL061=m
CONFIG_GPIO_PMIC_EIC_SPRD=m
CONFIG_GPIO_RCAR=m
CONFIG_GPIO_SAMA5D2_PIOBU=m
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=m
CONFIG_GPIO_SPRD=m
CONFIG_GPIO_SYSCON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_TEGRA=y
CONFIG_GPIO_TEGRA186=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_THUNDERX=m
CONFIG_GPIO_UNIPHIER=m
CONFIG_GPIO_WCD934X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_XGENE=y
CONFIG_GPIO_XGENE_SB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_XILINX=m
CONFIG_GPIO_XLP=m
CONFIG_GPIO_ZYNQ=m
CONFIG_GPIO_ZX=y
CONFIG_GPIO_AMD_FCH=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Memory mapped GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_ADNP=m
CONFIG_GPIO_GW_PLD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_PCF857X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_TPIC2810=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_ADP5520=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_ARIZONA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_BD70528=m
CONFIG_GPIO_BD71828=m
CONFIG_GPIO_BD9571MWV=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_DA9052=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_DA9055=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_DLN2=m
CONFIG_GPIO_JANZ_TTL=m
CONFIG_GPIO_KEMPLD=m
CONFIG_GPIO_LP3943=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_LP873X=m
CONFIG_GPIO_LP87565=m
CONFIG_GPIO_MADERA=m
CONFIG_GPIO_MAX77620=m
CONFIG_GPIO_MAX77650=m
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SL28CPLD=m
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS65218=m
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_TPS65912=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_TPS68470=y
CONFIG_GPIO_TQMX86=m
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_TWL6040=m
CONFIG_GPIO_UCB1400=m
CONFIG_GPIO_WM831X=m
CONFIG_GPIO_WM8350=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_WM8994=m
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_MLXBF=m
CONFIG_GPIO_MLXBF2=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_PCI_IDIO_16=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_PCIE_IDIO_24=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_RDC321X=m
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_74X164=m
CONFIG_GPIO_MAX3191X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_PISOSR=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_XRA1403=m
CONFIG_GPIO_MOXTET=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GPIO_AGGREGATOR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_GPIO_MOCKUP is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_W1_MASTER_MXC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_W1_MASTER_SGI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_W1_SLAVE_DS2430=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_BRCMSTB=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_POWER_RESET_HISI=y
CONFIG_POWER_RESET_LINKSTATION=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_POWER_RESET_MSM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_POWER_RESET_QCOM_PON=m
CONFIG_POWER_RESET_OCELOT_RESET=y
CONFIG_POWER_RESET_LTC2952=y
CONFIG_POWER_RESET_MT6323=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_VEXPRESS=y
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_POWER_RESET_ZX=m
CONFIG_REBOOT_MODE=m
CONFIG_SYSCON_REBOOT_MODE=m
CONFIG_POWER_RESET_SC27XX=m
CONFIG_NVMEM_REBOOT_MODE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_POWER_SUPPLY_HWMON=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PDA_POWER=m
CONFIG_GENERIC_ADC_BATTERY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAX8925_POWER=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TEST_POWER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BATTERY_88PM860X=m
CONFIG_CHARGER_ADP5061=m
CONFIG_BATTERY_ACT8945A=m
CONFIG_BATTERY_CPCAP=m
CONFIG_BATTERY_CW2015=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHARGER_SBS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BATTERY_DA9030=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BATTERY_DA9052=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHARGER_DA9150=m
CONFIG_BATTERY_DA9150=m
CONFIG_CHARGER_AXP20X=m
CONFIG_BATTERY_AXP20X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AXP20X_POWER=m
CONFIG_AXP288_FUEL_GAUGE=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BATTERY_MAX1721X=m
CONFIG_BATTERY_TWL4030_MADC=m
CONFIG_CHARGER_88PM860X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHARGER_PCF50633=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BATTERY_RX51=m
CONFIG_CHARGER_CPCAP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHARGER_TWL4030=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHARGER_LP8727=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHARGER_LP8788=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHARGER_LT3651=m
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_DETECTOR_MAX14656=m
CONFIG_CHARGER_MAX77650=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX8997=m
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_MP2629=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHARGER_QCOM_SMBB=m
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHARGER_BQ2515X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHARGER_BQ25890=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHARGER_BQ25980=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHARGER_SMB347=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHARGER_TPS65090=m
CONFIG_CHARGER_TPS65217=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BATTERY_GAUGE_LTC2941=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BATTERY_RT5033=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CHARGER_RT9455=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHARGER_CROS_USBPD=m
CONFIG_CHARGER_SC2731=m
CONFIG_FUEL_GAUGE_SC27XX=m
CONFIG_CHARGER_UCS1002=m
CONFIG_CHARGER_BD70528=m
CONFIG_CHARGER_BD99954=m
CONFIG_RN5T618_POWER=m
CONFIG_HWMON=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_ADM1177=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_AS370=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_ASC7621=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_AXI_FAN_CONTROL=m
CONFIG_SENSORS_ARM_SCMI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_ARM_SCPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_ASPEED=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_ATXP1=m
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_SENSORS_BT1_PVT=m
CONFIG_SENSORS_BT1_PVT_ALARMS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_CORSAIR_CPRO=m
CONFIG_SENSORS_DRIVETEMP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DA9052_ADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_DA9055=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_I5K_AMB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_SPARX5=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_GSC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_MC13783_ADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_FTSTEUTATES=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_GPIO_FAN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=m
CONFIG_SENSORS_LINEAGE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_LOCHNAGAR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_LTC2945=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2947_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_MAX31722=m
CONFIG_SENSORS_MAX31730=m
CONFIG_SENSORS_MAX6621=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_MAX31790=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_MLXREG_FAN=m
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_MR75203=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_NPCM7XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_OCC_P8_I2C=m
CONFIG_SENSORS_OCC_P9_SBE=m
CONFIG_SENSORS_OCC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_ADM1266=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_ADM1275=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_BEL_PFE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_IBM_CFFPS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_INSPUR_IPSPS=m
CONFIG_SENSORS_IR35221=m
CONFIG_SENSORS_IR38064=m
CONFIG_SENSORS_IRPS5401=m
CONFIG_SENSORS_ISL68137=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_LTC3815=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_MAX16064=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_MAX20751=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_MAX31785=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_MP2975=m
CONFIG_SENSORS_PXE1610=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_TPS40422=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_TPS53679=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_XDPE122=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_SL28CPLD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_SHT3x=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_INA3221=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_TMP513=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_VEXPRESS=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_W83773G=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SENSORS_W83795_FANCTRL is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_XGENE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_THERMAL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_THERMAL_NETLINK=y
CONFIG_THERMAL_STATISTICS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_THERMAL_HWMON=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CPU_FREQ_THERMAL=y
CONFIG_CPU_IDLE_THERMAL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_THERMAL_MMIO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HISI_THERMAL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IMX_THERMAL=m
CONFIG_IMX_SC_THERMAL=m
CONFIG_IMX8MM_THERMAL=m
CONFIG_K3_THERMAL=m
CONFIG_MAX77620_THERMAL=m
CONFIG_QORIQ_THERMAL=m
CONFIG_SUN8I_THERMAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ROCKCHIP_THERMAL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RCAR_THERMAL=m
CONFIG_RCAR_GEN3_THERMAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARMADA_THERMAL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DA9062_THERMAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTK_THERMAL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AMLOGIC_THERMAL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Broadcom thermal drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BCM2711_THERMAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BCM2835_THERMAL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BRCMSTB_THERMAL=m
CONFIG_BCM_NS_THERMAL=m
CONFIG_BCM_SR_THERMAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Broadcom thermal drivers
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TI_SOC_THERMAL is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Samsung thermal drivers
#
CONFIG_EXYNOS_THERMAL=m
# end of Samsung thermal drivers
#
# NVIDIA Tegra thermal drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TEGRA_SOCTHERM=m
CONFIG_TEGRA_BPMP_THERMAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of NVIDIA Tegra thermal drivers
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GENERIC_ADC_THERMAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Qualcomm thermal drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCOM_TSENS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QCOM_SPMI_TEMP_ALARM=m
# end of Qualcomm thermal drivers
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ZX2967_THERMAL=m
CONFIG_UNIPHIER_THERMAL=m
CONFIG_SPRD_THERMAL=m
CONFIG_KHADAS_MCU_FAN_THERMAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_WATCHDOG_SYSFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Watchdog Pretimeout Governors
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=m
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_BD70528_WATCHDOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DA9052_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DA9055_WATCHDOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=m
CONFIG_GPIO_WATCHDOG=m
CONFIG_MENF21BMC_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MENZ069_WATCHDOG=m
CONFIG_WDAT_WDT=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_WM8350_WATCHDOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XILINX_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_RAVE_SP_WATCHDOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MLX_WDT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SL28CPLD_WATCHDOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM_SP805_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_SBSA_WATCHDOG=m
CONFIG_ARMADA_37XX_WATCHDOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CADENCE_WATCHDOG=m
CONFIG_S3C2410_WATCHDOG=m
CONFIG_DW_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_K3_RTI_WATCHDOG=m
CONFIG_RN5T618_WATCHDOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SUNXI_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TWL4030_WATCHDOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MAX63XX_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAX77620_WATCHDOG=m
CONFIG_IMX2_WDT=m
CONFIG_IMX_SC_WDT=m
CONFIG_IMX7ULP_WDT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RETU_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TEGRA_WATCHDOG=m
CONFIG_QCOM_WDT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MEDIATEK_WATCHDOG=m
CONFIG_ARM_SMC_WATCHDOG=m
CONFIG_RENESAS_WDT=m
CONFIG_RENESAS_RZAWDT=m
CONFIG_ZX2967_WATCHDOG=m
CONFIG_STPMIC1_WATCHDOG=m
CONFIG_UNIPHIER_WATCHDOG=m
CONFIG_RTD119X_WATCHDOG=y
CONFIG_SPRD_WATCHDOG=m
CONFIG_PM8916_WATCHDOG=m
CONFIG_VISCONTI_WATCHDOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ALIM7101_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_KEMPLD_WDT=m
CONFIG_BCM2835_WDT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BCM7038_WDT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEN_A21_WDT=m
CONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SSB_PCMCIAHOST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BCMA_HOST_SOC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BCMA_DRIVER_PCI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BCMA_SFLASH=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_BCMA_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_ALTERA_SYSMGR=y
CONFIG_MFD_ACT8945A=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_SUN4I_GPADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=m
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=m
CONFIG_MFD_ATMEL_HLCDC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_BCM590XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_BD9571MWV=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_AC100=m
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
CONFIG_MFD_AXP20X_RSB=m
CONFIG_MFD_CROS_EC_DEV=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_MADERA=m
CONFIG_MFD_MADERA_I2C=m
CONFIG_MFD_MADERA_SPI=m
CONFIG_MFD_CS47L15=y
CONFIG_MFD_CS47L35=y
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
CONFIG_MFD_CS47L92=y
CONFIG_PMIC_DA903X=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_DA9062=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_DLN2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_GATEWORKS_GSC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
CONFIG_MFD_MC13XXX_I2C=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_MP2629=m
CONFIG_MFD_HI6421_PMIC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_HI655X_PMIC=m
CONFIG_HTC_PASIC3=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HTC_I2CPLD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_IQS62X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_KEMPLD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_88PM800=m
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=m
CONFIG_MFD_MAX77686=m
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=m
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6360=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_UCB1400_CORE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_QCOM_RPM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_SPMI_PMIC=m
CONFIG_MFD_RDC321X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_RT5033=m
CONFIG_MFD_RC5T583=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_RK808=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_RN5T618=m
CONFIG_MFD_SEC_CORE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_SI476X_CORE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_SIMPLE_MFD_I2C=m
CONFIG_MFD_SL28CPLD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_SC27XX_PMIC=m
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=m
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# end of STMicroelectronics STMPE Interface Drivers
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=m
CONFIG_MFD_PALMAS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TPS68470=y
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TI_LP87565=m
CONFIG_MFD_TPS65218=m
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_TPS65912=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_TPS65912_I2C=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_TPS65912_SPI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_VX855=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_LOCHNAGAR=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_ARIZONA_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_CS47L24=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MFD_WM8994=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MFD_ROHM_BD718XX=m
CONFIG_MFD_ROHM_BD70528=m
CONFIG_MFD_ROHM_BD71828=m
CONFIG_MFD_STPMIC1=m
CONFIG_MFD_STMFX=m
CONFIG_MFD_WCD934X=m
CONFIG_MFD_KHADAS_MCU=m
CONFIG_MFD_VEXPRESS_SYSREG=m
CONFIG_RAVE_SP_CORE=m
CONFIG_MFD_INTEL_M10_BMC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_FIXED_VOLTAGE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_88PM8607=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_ACT8865=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_ACT8945A=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ANATOP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_AAT2870=m
CONFIG_REGULATOR_AB3100=m
CONFIG_REGULATOR_ARIZONA_LDO1=m
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
CONFIG_REGULATOR_AS3711=m
CONFIG_REGULATOR_AS3722=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_BD70528=m
CONFIG_REGULATOR_BD71828=m
CONFIG_REGULATOR_BD718XX=m
CONFIG_REGULATOR_BD9571MWV=m
CONFIG_REGULATOR_CPCAP=m
CONFIG_REGULATOR_CROS_EC=m
CONFIG_REGULATOR_DA903X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_DA9052=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_DA9055=m
CONFIG_REGULATOR_DA9062=m
CONFIG_REGULATOR_DA9063=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_FAN53555=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_FAN53880=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_GPIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_HI6421=m
CONFIG_REGULATOR_HI6421V530=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_HI655X=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LOCHNAGAR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_LP873X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_LP8755=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_LP87565=m
CONFIG_REGULATOR_LP8788=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_LTC3589=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX14577=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_MAX1586=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_MAX77620=m
CONFIG_REGULATOR_MAX77650=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8925=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_MAX8952=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_MAX8973=m
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MAX8998=m
CONFIG_REGULATOR_MAX77686=m
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_MAX77826=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_MCP16502=m
CONFIG_REGULATOR_MP5416=m
CONFIG_REGULATOR_MP8859=m
CONFIG_REGULATOR_MP886X=m
CONFIG_REGULATOR_MPQ7920=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_MT6311=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_MT6323=m
CONFIG_REGULATOR_MT6358=m
CONFIG_REGULATOR_MT6360=m
CONFIG_REGULATOR_MT6380=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_MT6397=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_PALMAS=m
CONFIG_REGULATOR_PCA9450=m
CONFIG_REGULATOR_PCAP=m
CONFIG_REGULATOR_PCF50633=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_PFUZE100=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
CONFIG_REGULATOR_PV88090=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_PWM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_QCOM_RPM=m
CONFIG_REGULATOR_QCOM_RPMH=m
CONFIG_REGULATOR_QCOM_SMD_RPM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_QCOM_SPMI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_QCOM_USB_VBUS=m
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=m
CONFIG_REGULATOR_RC5T583=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_RK808=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_ROHM=m
CONFIG_REGULATOR_RT4801=m
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_RTMV20=m
CONFIG_REGULATOR_S2MPA01=m
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_SC2731=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_SKY81452=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_SLG51000=m
CONFIG_REGULATOR_STPMIC1=m
CONFIG_REGULATOR_SY8106A=m
CONFIG_REGULATOR_SY8824X=m
CONFIG_REGULATOR_SY8827N=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_TPS65086=m
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_TPS65218=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_TPS6524X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_TPS6586X=m
CONFIG_REGULATOR_TPS65910=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_TPS65912=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_TPS80031=m
CONFIG_REGULATOR_TWL4030=m
CONFIG_REGULATOR_UNIPHIER=y
CONFIG_REGULATOR_VCTRL=m
CONFIG_REGULATOR_VEXPRESS=m
CONFIG_REGULATOR_VQMMC_IPQ4019=m
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8350=m
CONFIG_REGULATOR_WM8400=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REGULATOR_WM8994=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REGULATOR_QCOM_LABIBB=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IR_IMON_DECODER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IR_RCMM_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
CONFIG_IR_HIX5HD2=m
CONFIG_IR_IMON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IR_IMON_RAW=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_MESON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IR_MTK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IR_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IR_STREAMZAP=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_IR_GPIO_TX=m
CONFIG_IR_PWM_TX=m
CONFIG_IR_SUNXI=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IR_SIR=m
CONFIG_RC_XBOX_DVD=m
CONFIG_IR_ZX=m
CONFIG_IR_TOY=m
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y
CONFIG_CEC_PIN=y
CONFIG_MEDIA_CEC_RC=y
# CONFIG_CEC_PIN_ERROR_INJ is not set
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_CEC_CH7322=m
CONFIG_CEC_CROS_EC=m
CONFIG_CEC_MESON_AO=m
CONFIG_CEC_MESON_G12A_AO=m
CONFIG_CEC_SAMSUNG_S5P=m
CONFIG_CEC_TEGRA=m
CONFIG_USB_PULSE8_CEC=m
CONFIG_USB_RAINSHADOW_CEC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEDIA_SUPPORT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# Media device types
add aarch64 support
2020-11-26 21:09:27 +00:00
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIDEO_DEV=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
#
# Video4Linux options
#
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_V4L2_SUBDEV_API=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_V4L2_JPEG_HELPER=m
CONFIG_V4L2_H264=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FLASH_LED_CLASS=m
CONFIG_V4L2_FWNODE=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Video4Linux options
#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_MEDIA_CONTROLLER_REQUEST_API=y
#
# Please notice that the enabled Media controller Request API is EXPERIMENTAL
#
# end of Media controller options
#
# Digital TV options
#
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=8
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DVB_DYNAMIC_MINORS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Digital TV options
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Media drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# Drivers filtered as selected at 'Filter media drivers'
#
CONFIG_TTPCI_EEPROM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DVB_USB_CXUSB_ANALOG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_DVBSKY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DVB_USB_ZD1301=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_AS102=m
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# Software defined radio USB devices
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m
CONFIG_USB_MSI2500=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=m
CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DT3155=m
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_GO7007=m
CONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DVB_AV7110_OSD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
CONFIG_DVB_SMIPCIE=m
CONFIG_DVB_NETUP_UNIDVB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_VIDEO_PCI_SKELETON is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RADIO_SI476X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_WL1273=m
CONFIG_RADIO_WL128X=m
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SMS_SIANO_DEBUGFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIDEO_V4L2_TPG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_CADENCE=y
CONFIG_VIDEO_CADENCE_CSI2RX=m
CONFIG_VIDEO_CADENCE_CSI2TX=m
CONFIG_VIDEO_ASPEED=m
CONFIG_VIDEO_MUX=m
CONFIG_VIDEO_QCOM_CAMSS=m
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
CONFIG_VIDEO_EXYNOS4_IS_COMMON=m
CONFIG_VIDEO_S5P_FIMC=m
CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
CONFIG_VIDEO_XILINX=m
CONFIG_VIDEO_XILINX_CSI2RXSS=m
CONFIG_VIDEO_XILINX_TPG=m
CONFIG_VIDEO_XILINX_VTC=m
CONFIG_VIDEO_RCAR_CSI2=m
CONFIG_VIDEO_RCAR_VIN=m
CONFIG_VIDEO_SUN4I_CSI=m
CONFIG_VIDEO_SUN6I_CSI=m
CONFIG_VIDEO_TI_CAL=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=m
CONFIG_VIDEO_IMX_PXP=m
CONFIG_VIDEO_MEDIATEK_JPEG=m
CONFIG_VIDEO_MEDIATEK_VPU=m
CONFIG_VIDEO_MEDIATEK_MDP=m
CONFIG_VIDEO_MEDIATEK_VCODEC=m
CONFIG_VIDEO_MEDIATEK_VCODEC_VPU=y
CONFIG_VIDEO_MEDIATEK_VCODEC_SCP=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SAMSUNG_S5P_G2D=m
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_JPU=m
CONFIG_VIDEO_RENESAS_FCP=m
CONFIG_VIDEO_RENESAS_VSP1=m
CONFIG_VIDEO_ROCKCHIP_RGA=m
CONFIG_VIDEO_QCOM_VENUS=m
CONFIG_VIDEO_SUN8I_DEINTERLACE=m
CONFIG_VIDEO_SUN8I_ROTATE=m
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_SDR_PLATFORM_DRIVERS=y
CONFIG_VIDEO_RCAR_DRIF=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIMC=m
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_VIDEO_VIM2M=m
CONFIG_VIDEO_VICODEC=m
CONFIG_DVB_TEST_DRIVERS=y
CONFIG_DVB_VIDTV=m
#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
# end of Media drivers
#
# Media ancillary drivers
add aarch64 support
2020-11-26 21:09:27 +00:00
#
CONFIG_MEDIA_ATTACH=y
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_IR_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA1997X=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SONY_BTF_MPX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Audio decoders, processors and mixers
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of RDS decoders
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ADV7183=m
CONFIG_VIDEO_ADV748X=m
CONFIG_VIDEO_ADV7604=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_ADV7604_CEC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIDEO_ADV7842=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_ADV7842_CEC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TC358743=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_TC358743_CEC=y
CONFIG_VIDEO_TVP514X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_TW9910=m
CONFIG_VIDEO_VPX3220=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_MAX9286=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Video decoders
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=m
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_AD9389B=m
CONFIG_VIDEO_AK881X=m
CONFIG_VIDEO_THS8200=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Video encoders
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Video improvement chips
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Audio/Video compression chips
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# SDR tuner chips
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SDR_MAX2175=m
# end of SDR tuner chips
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Miscellaneous helper chips
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_THS7303=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_I2C=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_ST_MIPID02=m
# end of Miscellaneous helper chips
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=m
CONFIG_VIDEO_SMIAPP_PLL=m
CONFIG_VIDEO_HI556=m
CONFIG_VIDEO_IMX214=m
CONFIG_VIDEO_IMX219=m
CONFIG_VIDEO_IMX258=m
CONFIG_VIDEO_IMX274=m
CONFIG_VIDEO_IMX290=m
CONFIG_VIDEO_IMX319=m
CONFIG_VIDEO_IMX355=m
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV2659=m
CONFIG_VIDEO_OV2680=m
CONFIG_VIDEO_OV2685=m
CONFIG_VIDEO_OV2740=m
CONFIG_VIDEO_OV5640=m
CONFIG_VIDEO_OV5645=m
CONFIG_VIDEO_OV5647=m
CONFIG_VIDEO_OV6650=m
CONFIG_VIDEO_OV5670=m
CONFIG_VIDEO_OV5675=m
CONFIG_VIDEO_OV5695=m
CONFIG_VIDEO_OV7251=m
CONFIG_VIDEO_OV772X=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_OV7740=m
CONFIG_VIDEO_OV8856=m
CONFIG_VIDEO_OV9640=m
CONFIG_VIDEO_OV9650=m
CONFIG_VIDEO_OV13858=m
CONFIG_VIDEO_VS6624=m
CONFIG_VIDEO_MT9M001=m
CONFIG_VIDEO_MT9M032=m
CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9P031=m
CONFIG_VIDEO_MT9T001=m
CONFIG_VIDEO_MT9T112=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_MT9V032=m
CONFIG_VIDEO_MT9V111=m
CONFIG_VIDEO_SR030PC30=m
CONFIG_VIDEO_NOON010PC30=m
CONFIG_VIDEO_M5MOLS=m
CONFIG_VIDEO_RDACM20=m
CONFIG_VIDEO_RJ54N1=m
CONFIG_VIDEO_S5K6AA=m
CONFIG_VIDEO_S5K6A3=m
CONFIG_VIDEO_S5K4ECGX=m
CONFIG_VIDEO_S5K5BAF=m
CONFIG_VIDEO_SMIAPP=m
CONFIG_VIDEO_ET8EK8=m
CONFIG_VIDEO_S5C73M3=m
# end of Camera sensor devices
#
# Lens drivers
#
CONFIG_VIDEO_AD5820=m
CONFIG_VIDEO_AK7375=m
CONFIG_VIDEO_DW9714=m
CONFIG_VIDEO_DW9768=m
CONFIG_VIDEO_DW9807_VCM=m
# end of Lens drivers
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=m
CONFIG_VIDEO_LM3560=m
CONFIG_VIDEO_LM3646=m
# end of Flash devices
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# SPI helper chips
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_GS1662=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of SPI helper chips
#
# Media SPI Adapters
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CXD2880_SPI_DRV=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MEDIA_TUNER_MSI001=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DVB_RTL2832_SDR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_GP8PSK_FE=m
CONFIG_DVB_CXD2880=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
CONFIG_DVB_MN88443X=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_HELENE=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Customise DVB Frontends
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Media ancillary drivers
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Graphics support
#
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_TEGRA_HOST1X=m
CONFIG_TEGRA_HOST1X_FIREWALL=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DBI=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DRM_DEBUG_SELFTEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_DP_CEC=y
CONFIG_DRM_TTM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_TTM_DMA_PAGE_POOL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_VRAM_HELPER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_TTM_HELPER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y
CONFIG_DRM_SCHED=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_I2C_NXP_TDA9950=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of I2C encoder or helper chips
#
# ARM devices
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_HDLCD=m
# CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_MALI_DISPLAY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_KOMEDA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of ARM devices
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_DRM_BAIKAL_VDU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_AMDGPU_SI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_AMDGPU_CIK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_AMDGPU_USERPTR=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# end of ACP (Audio CoProcessor) Configuration
#
# Display Engine Configuration
#
CONFIG_DRM_AMD_DC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_AMD_DC_HDCP=y
CONFIG_DRM_AMD_DC_SI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_KERNEL_DC is not set
# end of Display Engine Configuration
CONFIG_HSA_AMD=y
CONFIG_DRM_NOUVEAU=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NOUVEAU_PLATFORM_DRIVER=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DRM_NOUVEAU_SVM is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_VGEM=m
CONFIG_DRM_VKMS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_EXYNOS=m
#
# CRTCs
#
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS5433_DECON=y
CONFIG_DRM_EXYNOS7_DECON=y
CONFIG_DRM_EXYNOS_MIXER=y
CONFIG_DRM_EXYNOS_VIDI=y
#
# Encoders and Bridges
#
CONFIG_DRM_EXYNOS_DPI=y
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_DP=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_MIC=y
#
# Sub-drivers
#
CONFIG_DRM_EXYNOS_IPP=y
CONFIG_DRM_EXYNOS_FIMC=y
CONFIG_DRM_EXYNOS_ROTATOR=y
CONFIG_DRM_EXYNOS_SCALER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_ROCKCHIP=m
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_CDN_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
CONFIG_ROCKCHIP_LVDS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ROCKCHIP_RGB=y
CONFIG_ROCKCHIP_RK3066_HDMI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_RCAR_CMM=m
CONFIG_DRM_RCAR_DW_HDMI=m
CONFIG_DRM_RCAR_LVDS=m
CONFIG_DRM_RCAR_VSP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_RCAR_WRITEBACK=y
CONFIG_DRM_SUN4I=m
CONFIG_DRM_SUN4I_HDMI=m
CONFIG_DRM_SUN4I_HDMI_CEC=y
CONFIG_DRM_SUN4I_BACKEND=m
CONFIG_DRM_SUN6I_DSI=m
CONFIG_DRM_SUN8I_DW_HDMI=m
CONFIG_DRM_SUN8I_MIXER=m
CONFIG_DRM_SUN8I_TCON_TOP=m
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_MSM=m
CONFIG_DRM_MSM_GPU_STATE=y
# CONFIG_DRM_MSM_REGISTER_LOGGING is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_MSM_GPU_SUDO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_MSM_HDMI_HDCP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_MSM_DP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_MSM_DSI=y
CONFIG_DRM_MSM_DSI_PLL=y
CONFIG_DRM_MSM_DSI_28NM_PHY=y
CONFIG_DRM_MSM_DSI_20NM_PHY=y
CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
CONFIG_DRM_MSM_DSI_14NM_PHY=y
CONFIG_DRM_MSM_DSI_10NM_PHY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_MSM_DSI_7NM_PHY=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_TEGRA=m
# CONFIG_DRM_TEGRA_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_TEGRA_STAGING=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_PANEL=y
#
# Display Panels
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_PANEL_ARM_VERSATILE=m
CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596=m
CONFIG_DRM_PANEL_BOE_HIMAX8279D=m
CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
CONFIG_DRM_PANEL_LVDS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_PANEL_SIMPLE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_PANEL_ELIDA_KD35T133=m
CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02=m
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=m
CONFIG_DRM_PANEL_ILITEK_IL9322=m
CONFIG_DRM_PANEL_ILITEK_ILI9881C=m
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=m
CONFIG_DRM_PANEL_JDI_LT070ME05000=m
CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04=m
CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W=m
CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829=m
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
CONFIG_DRM_PANEL_LG_LB035Q02=m
CONFIG_DRM_PANEL_LG_LG4573=m
CONFIG_DRM_PANEL_NEC_NL8048HL11=m
CONFIG_DRM_PANEL_NOVATEK_NT35510=m
CONFIG_DRM_PANEL_NOVATEK_NT39016=m
CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=m
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS=m
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
CONFIG_DRM_PANEL_RONBO_RB070D30=m
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=m
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI=m
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=m
CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01=m
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SITRONIX_ST7701=m
CONFIG_DRM_PANEL_SITRONIX_ST7703=m
CONFIG_DRM_PANEL_SITRONIX_ST7789V=m
CONFIG_DRM_PANEL_SONY_ACX424AKP=m
CONFIG_DRM_PANEL_SONY_ACX565AKM=m
CONFIG_DRM_PANEL_TPO_TD028TTEC1=m
CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
CONFIG_DRM_PANEL_TPO_TPG110=m
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
CONFIG_DRM_PANEL_VISIONOX_RM69299=m
CONFIG_DRM_PANEL_XINPENG_XPP055C272=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_CDNS_DSI=m
CONFIG_DRM_CHRONTEL_CH7033=m
CONFIG_DRM_DISPLAY_CONNECTOR=m
CONFIG_DRM_LONTIUM_LT9611=m
CONFIG_DRM_LVDS_CODEC=m
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_DRM_BAIKAL_HDMI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW=m
CONFIG_DRM_NWL_MIPI_DSI=m
CONFIG_DRM_NXP_PTN3460=m
CONFIG_DRM_PARADE_PS8622=m
CONFIG_DRM_PARADE_PS8640=m
CONFIG_DRM_SIL_SII8620=m
CONFIG_DRM_SII902X=m
CONFIG_DRM_SII9234=m
CONFIG_DRM_SIMPLE_BRIDGE=m
CONFIG_DRM_THINE_THC63LVD1024=m
CONFIG_DRM_TOSHIBA_TC358762=m
CONFIG_DRM_TOSHIBA_TC358764=m
CONFIG_DRM_TOSHIBA_TC358767=m
CONFIG_DRM_TOSHIBA_TC358768=m
CONFIG_DRM_TOSHIBA_TC358775=m
CONFIG_DRM_TI_TFP410=m
CONFIG_DRM_TI_SN65DSI86=m
CONFIG_DRM_TI_TPD12S015=m
CONFIG_DRM_ANALOGIX_ANX6345=m
CONFIG_DRM_ANALOGIX_ANX78XX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_ANALOGIX_DP=m
CONFIG_DRM_I2C_ADV7511=m
# CONFIG_DRM_I2C_ADV7511_AUDIO is not set
CONFIG_DRM_I2C_ADV7511_CEC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_CDNS_MHDP8546=m
CONFIG_DRM_CDNS_MHDP8546_J721E=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_DW_HDMI=m
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
CONFIG_DRM_DW_HDMI_CEC=m
CONFIG_DRM_DW_MIPI_DSI=m
# end of Display Interface Bridges
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_IMX_DCSS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_VC4=m
CONFIG_DRM_VC4_HDMI_CEC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_ARCPGU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_HISI_HIBMC=m
CONFIG_DRM_HISI_KIRIN=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_MEDIATEK=m
CONFIG_DRM_MEDIATEK_HDMI=m
CONFIG_DRM_ZTE=m
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_MESON=m
CONFIG_DRM_MESON_DW_HDMI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_CIRRUS_QEMU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_GM12U320=m
CONFIG_TINYDRM_HX8357D=m
CONFIG_TINYDRM_ILI9225=m
CONFIG_TINYDRM_ILI9341=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TINYDRM_ILI9486=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TINYDRM_MI0283QT=m
CONFIG_TINYDRM_REPAPER=m
CONFIG_TINYDRM_ST7586=m
CONFIG_TINYDRM_ST7735R=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_PL111=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_XEN=y
CONFIG_DRM_XEN_FRONTEND=m
CONFIG_DRM_LIMA=m
CONFIG_DRM_PANFROST=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DRM_TIDSS=m
CONFIG_DRM_ZYNQMP_DPSUB=m
# CONFIG_DRM_LEGACY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_BACKLIGHT=m
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_ARMCLCD=m
CONFIG_FB_IMX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_UVESA=m
CONFIG_FB_EFI=y
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=m
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_FB_ATY_GENERIC_LCD is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_FB_SAVAGE_ACCEL is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_FB_3DFX_I2C is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FB_SH_MOBILE_LCDC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_SM501=m
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_XILINX=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FB_MX3=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_SIMPLE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FB_SSD1307=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FB_SM712=m
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=m
CONFIG_LCD_HX8357=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LCD_OTM3225A=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BACKLIGHT_KTD253=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_PWM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BACKLIGHT_DA903X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BACKLIGHT_DA9052=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BACKLIGHT_MAX8925=m
CONFIG_BACKLIGHT_QCOM_WLED=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BACKLIGHT_88PM860X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BACKLIGHT_PCF50633=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BACKLIGHT_AAT2870=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BACKLIGHT_LP8788=m
CONFIG_BACKLIGHT_PANDORA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BACKLIGHT_SKY81452=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BACKLIGHT_TPS65217=m
CONFIG_BACKLIGHT_AS3711=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
CONFIG_BACKLIGHT_ARCXCNN=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BACKLIGHT_RAVE_SP=m
CONFIG_BACKLIGHT_LED=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Backlight & LCD device support
CONFIG_VGASTATE=m
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_LOGO is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Graphics support
CONFIG_SOUND=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_COMPRESS_OFFLOAD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
# CONFIG_SND_PCM_OSS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SND_SEQUENCER_OSS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_ALS300=m
CONFIG_SND_ALI5451=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_AZT3328=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_BT87X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SND_BT87X_OVERCLOCK is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_FM801=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_FM801_TEA575X_BOOL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_ICE1712=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
#
# HD-Audio
#
CONFIG_SND_HDA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_HDA_GENERIC_LEDS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_HDA_INTEL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_HDA_TEGRA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=1
CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_HDA_ALIGNED_MMIO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_HDA_COMPONENT=y
Tune SND_HDA_PREALLOC_SIZE Value 64 makes sense only for some not needed backwards compatibility, modern default is 0, see https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/sound/hda/Kconfig?id=c31427d0d21e198c74d5d92082c4b8194b257f82 ("ALSA: hda: No preallocation on x86 platforms") Kconfig recommends value 2048 for systems with PulseAudio, set it on non-x86 arches (see commit above, it sets 0 only for x86).
2021-02-23 12:39:15 +03:00
CONFIG_SND_HDA_PREALLOC_SIZE=2048
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
CONFIG_SND_OXFW=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
CONFIG_SND_FIREWIRE_DIGI00X=m
CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_FIREWIRE_MOTU=m
CONFIG_SND_FIREFACE=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_COMPRESS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_ACPI=m
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
CONFIG_SND_ATMEL_SOC=m
CONFIG_SND_SOC_MIKROE_PROTO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_BCM2835_SOC_I2S=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_BCM63XX_I2S_WHISTLER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_DESIGNWARE_I2S=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_DESIGNWARE_PCM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_MQS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_FSL_AUDMIX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_FSL_MICFIL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_FSL_EASRC=m
CONFIG_SND_SOC_IMX_PCM_DMA=m
CONFIG_SND_SOC_IMX_AUDMUX=m
CONFIG_SND_IMX_SOC=m
#
# SoC Audio support for Freescale i.MX boards:
#
CONFIG_SND_SOC_IMX_ES8328=m
CONFIG_SND_SOC_IMX_SGTL5000=m
CONFIG_SND_SOC_IMX_SPDIF=m
CONFIG_SND_SOC_FSL_ASOC_CARD=m
CONFIG_SND_SOC_IMX_AUDMIX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of SoC Audio for Freescale CPUs
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_I2S_HI6210_I2S=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_KIRKWOOD_SOC=m
CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=m
CONFIG_SND_SOC_IMG_I2S_OUT=m
CONFIG_SND_SOC_IMG_PARALLEL_OUT=m
CONFIG_SND_SOC_IMG_SPDIF_IN=m
CONFIG_SND_SOC_IMG_SPDIF_OUT=m
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=m
CONFIG_SND_SOC_INTEL_KEEMBAY=m
CONFIG_SND_SOC_MEDIATEK=m
CONFIG_SND_SOC_MT2701=m
CONFIG_SND_SOC_MT2701_CS42448=m
CONFIG_SND_SOC_MT2701_WM8960=m
CONFIG_SND_SOC_MT6797=m
CONFIG_SND_SOC_MT6797_MT6351=m
CONFIG_SND_SOC_MT8173=m
CONFIG_SND_SOC_MT8173_MAX98090=m
CONFIG_SND_SOC_MT8173_RT5650=m
CONFIG_SND_SOC_MT8173_RT5650_RT5514=m
CONFIG_SND_SOC_MT8173_RT5650_RT5676=m
CONFIG_SND_SOC_MT8183=m
CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m
CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_MTK_BTCVSD=m
#
# ASoC support for Amlogic platforms
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_MESON_AIU=m
CONFIG_SND_MESON_AXG_FIFO=m
CONFIG_SND_MESON_AXG_FRDDR=m
CONFIG_SND_MESON_AXG_TODDR=m
CONFIG_SND_MESON_AXG_TDM_FORMATTER=m
CONFIG_SND_MESON_AXG_TDM_INTERFACE=m
CONFIG_SND_MESON_AXG_TDMIN=m
CONFIG_SND_MESON_AXG_TDMOUT=m
CONFIG_SND_MESON_AXG_SOUND_CARD=m
CONFIG_SND_MESON_AXG_SPDIFOUT=m
CONFIG_SND_MESON_AXG_SPDIFIN=m
CONFIG_SND_MESON_AXG_PDM=m
CONFIG_SND_MESON_CARD_UTILS=m
CONFIG_SND_MESON_CODEC_GLUE=m
CONFIG_SND_MESON_GX_SOUND_CARD=m
CONFIG_SND_MESON_G12A_TOACODEC=m
CONFIG_SND_MESON_G12A_TOHDMITX=m
CONFIG_SND_SOC_MESON_T9015=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of ASoC support for Amlogic platforms
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_QCOM=m
CONFIG_SND_SOC_LPASS_CPU=m
CONFIG_SND_SOC_LPASS_PLATFORM=m
CONFIG_SND_SOC_LPASS_IPQ806X=m
CONFIG_SND_SOC_LPASS_APQ8016=m
CONFIG_SND_SOC_STORM=m
CONFIG_SND_SOC_APQ8016_SBC=m
CONFIG_SND_SOC_QCOM_COMMON=m
CONFIG_SND_SOC_QDSP6_COMMON=m
CONFIG_SND_SOC_QDSP6_CORE=m
CONFIG_SND_SOC_QDSP6_AFE=m
CONFIG_SND_SOC_QDSP6_AFE_DAI=m
CONFIG_SND_SOC_QDSP6_AFE_CLOCKS=m
CONFIG_SND_SOC_QDSP6_ADM=m
CONFIG_SND_SOC_QDSP6_ROUTING=m
CONFIG_SND_SOC_QDSP6_ASM=m
CONFIG_SND_SOC_QDSP6_ASM_DAI=m
CONFIG_SND_SOC_QDSP6=m
CONFIG_SND_SOC_MSM8996=m
CONFIG_SND_SOC_SDM845=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_I2S=m
CONFIG_SND_SOC_ROCKCHIP_PDM=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
CONFIG_SND_SOC_RK3288_HDMI_ANALOG=m
CONFIG_SND_SOC_RK3399_GRU_SOUND=m
CONFIG_SND_SOC_SAMSUNG=m
CONFIG_SND_SAMSUNG_PCM=m
CONFIG_SND_SAMSUNG_SPDIF=m
CONFIG_SND_SAMSUNG_I2S=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_SMDK_WM8994_PCM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_SNOW=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_ODROID=m
CONFIG_SND_SOC_ARNDALE=m
CONFIG_SND_SOC_SAMSUNG_TM2_WM5110=m
CONFIG_SND_SOC_SAMSUNG_ARIES_WM8994=m
CONFIG_SND_SOC_SAMSUNG_MIDAS_WM1811=m
#
# SoC Audio support for Renesas SoCs
#
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_SOC_RCAR=m
# end of SoC Audio support for Renesas SoCs
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI=m
CONFIG_SND_SOC_SOF_ACPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_SOF_OF=m
CONFIG_SND_SOC_SOF_DEBUG_PROBES=y
CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT=y
CONFIG_SND_SOC_SOF_NOCODEC=m
CONFIG_SND_SOC_SOF_NOCODEC_SUPPORT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_SND_SOC_SOF_STRICT_ABI_CHECKS is not set
# CONFIG_SND_SOC_SOF_DEBUG is not set
CONFIG_SND_SOC_SOF=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
CONFIG_SND_SOC_SOF_IMX_OF=m
CONFIG_SND_SOC_SOF_IMX_COMMON=m
CONFIG_SND_SOC_SOF_IMX8_SUPPORT=y
CONFIG_SND_SOC_SOF_IMX8=m
CONFIG_SND_SOC_SOF_IMX8M_SUPPORT=y
CONFIG_SND_SOC_SOF_IMX8M=m
CONFIG_SND_SOC_SOF_XTENSA=m
CONFIG_SND_SOC_SPRD=m
CONFIG_SND_SOC_SPRD_MCDT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support
#
# Allwinner SoC Audio support
#
CONFIG_SND_SUN4I_CODEC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SUN8I_CODEC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SUN8I_CODEC_ANALOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SUN50I_CODEC_ANALOG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SUN4I_I2S=m
CONFIG_SND_SUN4I_SPDIF=m
CONFIG_SND_SUN8I_ADDA_PR_REGMAP=m
# end of Allwinner SoC Audio support
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_TEGRA=m
CONFIG_SND_SOC_TEGRA20_AC97=m
CONFIG_SND_SOC_TEGRA20_DAS=m
CONFIG_SND_SOC_TEGRA20_I2S=m
CONFIG_SND_SOC_TEGRA20_SPDIF=m
CONFIG_SND_SOC_TEGRA30_AHUB=m
CONFIG_SND_SOC_TEGRA30_I2S=m
CONFIG_SND_SOC_TEGRA210_AHUB=m
CONFIG_SND_SOC_TEGRA210_DMIC=m
CONFIG_SND_SOC_TEGRA210_I2S=m
CONFIG_SND_SOC_TEGRA186_DSPK=m
CONFIG_SND_SOC_TEGRA210_ADMAIF=m
CONFIG_SND_SOC_TEGRA_RT5640=m
CONFIG_SND_SOC_TEGRA_WM8753=m
CONFIG_SND_SOC_TEGRA_WM8903=m
CONFIG_SND_SOC_TEGRA_WM9712=m
CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
CONFIG_SND_SOC_TEGRA_ALC5632=m
CONFIG_SND_SOC_TEGRA_MAX98090=m
CONFIG_SND_SOC_TEGRA_RT5677=m
CONFIG_SND_SOC_TEGRA_SGTL5000=m
#
# Audio support for Texas Instruments SoCs
#
CONFIG_SND_SOC_TI_EDMA_PCM=m
CONFIG_SND_SOC_TI_SDMA_PCM=m
CONFIG_SND_SOC_TI_UDMA_PCM=m
#
# Texas Instruments DAI support for:
#
CONFIG_SND_SOC_DAVINCI_MCASP=m
#
# Audio support for boards with Texas Instruments SoCs
#
CONFIG_SND_SOC_J721E_EVM=m
# end of Audio support for Texas Instruments SoCs
CONFIG_SND_SOC_UNIPHIER=m
CONFIG_SND_SOC_UNIPHIER_AIO=m
CONFIG_SND_SOC_UNIPHIER_LD11=m
CONFIG_SND_SOC_UNIPHIER_PXS2=m
CONFIG_SND_SOC_UNIPHIER_EVEA_CODEC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_XILINX_I2S=m
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=m
CONFIG_SND_SOC_XILINX_SPDIF=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_XTFPGA_I2S=m
CONFIG_ZX_SPDIF=m
CONFIG_ZX_I2S=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ZX_TDM=m
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_ARIZONA=m
CONFIG_SND_SOC_WM_HUBS=m
CONFIG_SND_SOC_WM_ADSP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
CONFIG_SND_SOC_ADAU7002=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_ADAU7118=m
CONFIG_SND_SOC_ADAU7118_HW=m
CONFIG_SND_SOC_ADAU7118_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4118=m
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
CONFIG_SND_SOC_ALC5623=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_ALC5632=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_BD28623=m
CONFIG_SND_SOC_BT_SCO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_CPCAP=m
CONFIG_SND_SOC_CROS_EC_CODEC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_CS4234=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS4271_SPI=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
CONFIG_SND_SOC_CS4341=m
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS53L30=m
CONFIG_SND_SOC_CX2072X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_DA7213=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_GTM601=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_INNO_RK3036=m
CONFIG_SND_SOC_LOCHNAGAR_SC=m
CONFIG_SND_SOC_MAX98088=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98095=m
CONFIG_SND_SOC_MAX98357A=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_MAX98504=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_MAX9867=m
CONFIG_SND_SOC_MAX98927=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
CONFIG_SND_SOC_MAX98373_SDW=m
CONFIG_SND_SOC_MAX98390=m
CONFIG_SND_SOC_MAX9860=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM186X_SPI=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
CONFIG_SND_SOC_PCM3060_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM3168A_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x_SPI=m
CONFIG_SND_SOC_RK3328=m
CONFIG_SND_SOC_RL6231=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_RT1015=m
CONFIG_SND_SOC_RT1015P=m
CONFIG_SND_SOC_RT1308_SDW=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_RT5514=m
CONFIG_SND_SOC_RT5514_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_RT5616=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_RT5631=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_RT5640=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_RT5645=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5677_SPI=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_SGTL5000=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_SI476X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m
CONFIG_SND_SOC_SPDIF=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_SSM2305=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_SPI=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_STA350=m
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_TAS2562=m
CONFIG_SND_SOC_TAS2764=m
CONFIG_SND_SOC_TAS2770=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_TAS5720=m
CONFIG_SND_SOC_TAS6424=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_TDA7419=m
CONFIG_SND_SOC_TFA9879=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC23_SPI=m
CONFIG_SND_SOC_TLV320AIC31XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC32X4_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_TLV320AIC3X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_TLV320ADCX140=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_TS3A227E=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_TSCS42XX=m
CONFIG_SND_SOC_TSCS454=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_UDA1334=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_WCD9335=m
CONFIG_SND_SOC_WCD934X=m
CONFIG_SND_SOC_WM5110=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_WM8782=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8804_SPI=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_WM8960=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_WM8962=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_WM8974=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_WM8978=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_WM8994=m
CONFIG_SND_SOC_WM9712=m
CONFIG_SND_SOC_WSA881X=m
CONFIG_SND_SOC_ZL38060=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_ZX_AUD96P22=m
CONFIG_SND_SOC_MAX9759=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_MT6351=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_MT6358=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_SOC_MT6359=m
CONFIG_SND_SOC_MT6660=m
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8822=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_TPA6130A2=m
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SND_AUDIO_GRAPH_CARD=m
CONFIG_SND_SYNTH_EMUX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_XEN_FRONTEND=m
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HID_ACCUTOUCH=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HID_BIGBEN_FF=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_COUGAR=m
CONFIG_HID_MACALLY=m
CONFIG_HID_PRODIKEYS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HID_CMEDIA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_CP2112=m
CONFIG_HID_CREATIVE_SB0540=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELAN=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HID_GLORIOUS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HID_GOOGLE_HAMMER=m
CONFIG_HID_VIVALDI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_VIEWSONIC=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HID_JABRA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MALTRON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HID_MAYFLASH=m
CONFIG_HID_REDRAGON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_RETRODE=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SONY_FF=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HID_U2FZERO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HID_MCP2221=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of USB HID Boot Protocol drivers
# end of USB HID support
#
# I2C HID support
#
CONFIG_I2C_HID=m
# end of I2C HID support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_LED_TRIG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_ULPI_BUS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_CONN_GPIO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_ARCH_HAS_HCD=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_PCI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_XHCI_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_XHCI_PCI_RENESAS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_XHCI_PLATFORM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_XHCI_HISTB=m
CONFIG_USB_XHCI_MTK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_XHCI_MVEBU=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_XHCI_RCAR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_XHCI_TEGRA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_EHCI_BRCMSTB=m
CONFIG_USB_BRCMSTB=m
CONFIG_USB_EHCI_HCD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_EHCI_PCI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_EHCI_FSL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_EHCI_MXC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_EHCI_HCD_ORION=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_EHCI_TEGRA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_EHCI_EXYNOS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_EHCI_HCD_PLATFORM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_MAX3421_HCD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_OHCI_EXYNOS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_RENESAS_USBHS_HCD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
# CONFIG_USB_HCD_TEST_MODE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_RENESAS_USBHS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USBIP_VUDC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_USBIP_DEBUG is not set
CONFIG_USB_CDNS3=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_CDNS3_GADGET=y
CONFIG_USB_CDNS3_HOST=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_CDNS3_PCI_WRAP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_CDNS3_TI=m
CONFIG_USB_CDNS3_IMX=m
CONFIG_USB_MTU3=m
# CONFIG_USB_MTU3_HOST is not set
# CONFIG_USB_MTU3_GADGET is not set
CONFIG_USB_MTU3_DUAL_ROLE=y
# CONFIG_USB_MTU3_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
#
# Platform Glue Layer
#
CONFIG_USB_MUSB_SUNXI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_MUSB_MEDIATEK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_DWC3_ULPI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_EXYNOS=m
CONFIG_USB_DWC3_PCI=m
CONFIG_USB_DWC3_HAPS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_DWC3_KEYSTONE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_DWC3_MESON_G12A=m
CONFIG_USB_DWC3_OF_SIMPLE=m
CONFIG_USB_DWC3_QCOM=m
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_USB_DWC3_BAIKAL=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
CONFIG_USB_DWC2_PCI=m
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_CHIPIDEA_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_CHIPIDEA_MSM=m
CONFIG_USB_CHIPIDEA_IMX=m
CONFIG_USB_CHIPIDEA_GENERIC=m
CONFIG_USB_CHIPIDEA_TEGRA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_F8153X=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_APPLE_MFI_FASTCHARGE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HUB_USB251XB=m
CONFIG_USB_HSIC_USB3503=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_HSIC_USB4604=m
CONFIG_USB_LINK_LAYER_TEST=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_USB_GPIO_VBUS=m
CONFIG_TAHVO_USB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_ISP1301=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_MXS_PHY=m
CONFIG_USB_TEGRA_PHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_ULPI=y
CONFIG_USB_ULPI_VIEWPORT=y
# end of USB Physical Layer drivers
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y
#
# USB Peripheral Controller
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_FSL_USB2=m
CONFIG_USB_FOTG210_UDC=m
CONFIG_USB_GR_UDC=m
CONFIG_USB_R8A66597=m
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_RENESAS_USB3=m
CONFIG_USB_PXA27X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_MV_UDC=m
CONFIG_USB_MV_U3D=m
CONFIG_USB_SNP_CORE=m
CONFIG_USB_SNP_UDC_PLAT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_USB_M66592 is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_BDC_UDC=m
#
# Platform Support
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_AMD5536UDC=m
CONFIG_USB_NET2272=m
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=m
CONFIG_USB_GOKU=m
CONFIG_USB_EG20T=m
CONFIG_USB_GADGET_XILINX=m
CONFIG_USB_MAX3420_UDC=m
CONFIG_USB_TEGRA_XUDC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_USB_DUMMY_HCD is not set
# end of USB Peripheral Controller
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_PHONET=m
CONFIG_USB_F_EEM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_UAC1=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_F_UAC1_LEGACY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_F_UAC2=m
CONFIG_USB_F_UVC=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_F_TCM=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# USB Gadget precomposed configurations
#
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
CONFIG_GADGET_UAC1=y
# CONFIG_GADGET_UAC1_LEGACY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_USB_ETH=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_GADGET_TARGET=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_ACM_MS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_USB_G_MULTI is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=m
CONFIG_USB_RAW_GADGET=m
# end of USB Gadget precomposed configurations
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_TCPCI=m
CONFIG_TYPEC_RT1711H=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TYPEC_MT6360=m
CONFIG_TYPEC_TCPCI_MAXIM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TYPEC_FUSB302=m
CONFIG_TYPEC_UCSI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_UCSI_CCG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_UCSI_ACPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TYPEC_HD3SS3220=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TYPEC_TPS6598X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TYPEC_STUSB160X=m
CONFIG_TYPEC_QCOM_PMIC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
CONFIG_TYPEC_MUX_PI3USB30532=m
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
CONFIG_TYPEC_DP_ALTMODE=m
CONFIG_TYPEC_NVIDIA_ALTMODE=m
# end of USB Type-C Alternate Mode drivers
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SD8787=m
CONFIG_PWRSEQ_SIMPLE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_MMC_TEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_ARMMMCI=m
CONFIG_MMC_QCOM_DML=y
CONFIG_MMC_STM32_SDMMC=y
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_SDHCI_OF_ARASAN=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_SDHCI_OF_ASPEED=m
CONFIG_MMC_SDHCI_OF_AT91=m
CONFIG_MMC_SDHCI_OF_ESDHC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_SDHCI_OF_DWCMSHC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_SDHCI_OF_SPARX5=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_SDHCI_CADENCE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_SDHCI_ESDHC_IMX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_SDHCI_TEGRA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_SDHCI_S3C=m
CONFIG_MMC_SDHCI_PXAV3=m
CONFIG_MMC_SDHCI_S3C_DMA=y
CONFIG_MMC_SDHCI_F_SDH30=m
CONFIG_MMC_SDHCI_MILBEAUT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_SDHCI_IPROC=m
CONFIG_MMC_MESON_GX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_MESON_MX_SDIO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_ALCOR=m
CONFIG_MMC_SDHCI_MSM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_MXC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_SDRICOH_CS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_SDHCI_SPRD=m
CONFIG_MMC_TMIO_CORE=m
CONFIG_MMC_SDHI=m
CONFIG_MMC_SDHI_SYS_DMAC=m
CONFIG_MMC_SDHI_INTERNAL_DMAC=m
CONFIG_MMC_UNIPHIER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_CAVIUM_THUNDERX=m
CONFIG_MMC_DW=m
CONFIG_MMC_DW_PLTFM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_DW_BLUEFIELD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_DW_EXYNOS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_DW_HI3798CV200=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_DW_K3=m
CONFIG_MMC_DW_PCI=m
CONFIG_MMC_DW_ROCKCHIP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_DW_ZX=m
CONFIG_MMC_SH_MMCIF=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_SUNXI=m
CONFIG_MMC_CQHCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_HSQ=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_TOSHIBA_PCI=m
CONFIG_MMC_BCM2835=m
CONFIG_MMC_MTK=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_SDHCI_BRCMSTB=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMC_SDHCI_XENON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MMC_SDHCI_OMAP=m
CONFIG_MMC_SDHCI_AM654=m
CONFIG_MMC_OWL=m
CONFIG_MMC_SDHCI_EXTERNAL_DMA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MS_BLOCK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# LED drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_88PM860X=m
CONFIG_LEDS_AAT1290=m
CONFIG_LEDS_AN30259A=m
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_AW2013=m
CONFIG_LEDS_BCM6328=m
CONFIG_LEDS_BCM6358=m
CONFIG_LEDS_CPCAP=m
CONFIG_LEDS_CR0014114=m
CONFIG_LEDS_EL15203000=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_LM3692X=m
CONFIG_LEDS_LM3601X=m
CONFIG_LEDS_MT6323=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_LP8788=m
CONFIG_LEDS_LP8860=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_PCA955X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_PCA955X_GPIO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_PCA963X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA903X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_ADP5520=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_MAX77650=m
CONFIG_LEDS_MAX77693=m
CONFIG_LEDS_MAX8997=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_MENF21BMC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_KTD2692=m
CONFIG_LEDS_IS31FL319X=m
CONFIG_LEDS_IS31FL32XX=m
CONFIG_LEDS_SC27XX_BLTC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_SYSCON=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_SPI_BYTE=m
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
CONFIG_LEDS_LM36274=m
CONFIG_LEDS_TPS6105X=m
CONFIG_LEDS_SGM3140=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_TRIGGER_ACTIVITY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_LEDS_TRIGGER_PATTERN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LEDS_TRIGGER_AUDIO=m
Enable accessibility (e.g. for readers of console output for blind users)
2021-02-23 13:48:54 +03:00
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# end of Speakup console speech
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INFINIBAND_VIRT_DMA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INFINIBAND_MTHCA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INFINIBAND_CXGB4=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INFINIBAND_EFA=m
CONFIG_INFINIBAND_I40IW=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_OCRDMA=m
CONFIG_INFINIBAND_VMWARE_PVRDMA=m
CONFIG_INFINIBAND_HNS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INFINIBAND_HNS_HIP06=y
CONFIG_INFINIBAND_HNS_HIP08=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INFINIBAND_BNXT_RE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INFINIBAND_QEDR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RDMA_RXE=m
CONFIG_RDMA_SIW=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INFINIBAND_RTRS=m
CONFIG_INFINIBAND_RTRS_CLIENT=m
CONFIG_INFINIBAND_RTRS_SERVER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_EDAC_LEGACY_SYSFS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_EDAC_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AL_MC=m
CONFIG_EDAC_LAYERSCAPE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EDAC_THUNDERX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EDAC_ALTERA=y
CONFIG_EDAC_ALTERA_SDRAM=y
CONFIG_EDAC_ALTERA_OCRAM=y
CONFIG_EDAC_ALTERA_ETHERNET=y
CONFIG_EDAC_ALTERA_NAND=y
CONFIG_EDAC_ALTERA_USB=y
CONFIG_EDAC_ALTERA_QSPI=y
CONFIG_EDAC_ALTERA_SDMMC=y
CONFIG_EDAC_SYNOPSYS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EDAC_XGENE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EDAC_QCOM=m
CONFIG_EDAC_BLUEFIELD=m
CONFIG_EDAC_DMC520=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# I2C RTC drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_88PM860X=m
CONFIG_RTC_DRV_88PM80X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABEOZ9=m
CONFIG_RTC_DRV_ABX80X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_AC100=m
CONFIG_RTC_DRV_BRCMSTB=y
CONFIG_RTC_DRV_AS3722=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_LP8788=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_MAX6900=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_MAX8997=m
CONFIG_RTC_DRV_MAX77686=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_ISL12026=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85063=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_PCF85363=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_BD70528=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_BQ32K=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_TWL4030=m
CONFIG_RTC_DRV_PALMAS=m
CONFIG_RTC_DRV_TPS6586X=m
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_TPS80031=m
CONFIG_RTC_DRV_RC5T583=m
CONFIG_RTC_DRV_RC5T619=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_RX8010=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3028=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_RV3032=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_RV8803=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_S5M=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_SD3078=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_DS1302=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_MAX6916=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RX4581=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_RX6110=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_RTC_DRV_PCF2127=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_DA9055=m
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_EFI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_SC27XX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_PCF50633=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_AB3100=m
CONFIG_RTC_DRV_ZYNQMP=m
CONFIG_RTC_DRV_CROS_EC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# on-CPU RTC drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_IMXDI=m
CONFIG_RTC_DRV_FSL_FTM_ALARM=m
CONFIG_RTC_DRV_MESON_VRTC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_S3C_RTC=y
CONFIG_RTC_DRV_S3C=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_SH=m
CONFIG_RTC_DRV_PL030=m
CONFIG_RTC_DRV_PL031=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_SUN6I=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_MV=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_RTC_DRV_ARMADA38X is not set
# CONFIG_RTC_DRV_CADENCE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_FTRTC010=m
CONFIG_RTC_DRV_PCAP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_MC13XXX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_PM8XXX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_TEGRA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_MXC=m
CONFIG_RTC_DRV_MXC_V2=m
CONFIG_RTC_DRV_SNVS=m
CONFIG_RTC_DRV_IMX_SC=m
CONFIG_RTC_DRV_MT2712=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RTC_DRV_MT6397=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RTC_DRV_MT7622=m
CONFIG_RTC_DRV_XGENE=m
CONFIG_RTC_DRV_R7301=m
CONFIG_RTC_DRV_CPCAP=m
CONFIG_RTC_DRV_RTD119X=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AMBA_PL08X=y
CONFIG_AXI_DMAC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BCM_SBA_RAID=m
CONFIG_DMA_BCM2835=m
CONFIG_DMA_SUN6I=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DW_AXI_DMAC=m
CONFIG_FSL_EDMA=m
CONFIG_FSL_QDMA=m
CONFIG_HISI_DMA=m
CONFIG_IMX_DMA=m
CONFIG_IMX_SDMA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INTEL_IDMA64=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_K3_DMA=m
CONFIG_MV_XOR=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MV_XOR_V2=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MXS_DMA=y
CONFIG_MX3_IPU=y
CONFIG_MX3_IPU_IRQS=4
CONFIG_OWL_DMA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PL330_DMA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PLX_DMA=m
CONFIG_SPRD_DMA=m
CONFIG_TEGRA20_APB_DMA=m
CONFIG_TEGRA210_ADMA=m
CONFIG_UNIPHIER_MDMAC=m
CONFIG_UNIPHIER_XDMAC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XGENE_DMA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XILINX_DMA=m
CONFIG_XILINX_ZYNQMP_DMA=m
CONFIG_XILINX_ZYNQMP_DPDMA=m
CONFIG_ZX_DMA=m
CONFIG_MTK_HSDMA=m
CONFIG_MTK_CQDMA=m
CONFIG_MTK_UART_APDMA=m
CONFIG_QCOM_BAM_DMA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QCOM_HIDMA_MGMT=m
CONFIG_QCOM_HIDMA=m
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DW_EDMA=m
CONFIG_DW_EDMA_PCIE=m
CONFIG_SF_PDMA=m
CONFIG_RENESAS_DMA=y
CONFIG_RCAR_DMAC=m
CONFIG_RENESAS_USB_DMAC=m
CONFIG_TI_K3_UDMA=y
CONFIG_TI_K3_UDMA_GLUE_LAYER=y
CONFIG_TI_K3_PSIL=y
CONFIG_FSL_DPAA2_QDMA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DMATEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DMABUF_SELFTESTS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_HEAPS_SYSTEM=y
CONFIG_DMABUF_HEAPS_CMA=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of DMABUF options
CONFIG_AUXDISPLAY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HD44780=m
CONFIG_IMG_ASCII_LCD=m
CONFIG_HT16K33=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PARPORT_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
CONFIG_PANEL=m
CONFIG_CHARLCD=m
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
CONFIG_UIO_MF624=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VFIO_NOIOMMU=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VFIO_PLATFORM=m
CONFIG_VFIO_AMBA=m
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m
CONFIG_VFIO_PLATFORM_AMDXGBE_RESET=m
CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET=m
CONFIG_VFIO_MDEV=m
CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_VFIO_FSL_MC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIRT_DRIVERS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIRTIO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIRTIO_MENU=y
Virtio as module (no need to make it built in), enable VirtualBox guest modules
2021-02-23 13:28:34 +03:00
CONFIG_VIRTIO_PCI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIRTIO_PCI_LEGACY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIRTIO_VDPA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIRTIO_PMEM=m
Virtio as module (no need to make it built in), enable VirtualBox guest modules
2021-02-23 13:28:34 +03:00
CONFIG_VIRTIO_BALLOON=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIRTIO_INPUT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIRTIO_MMIO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
CONFIG_VDPA=m
CONFIG_VDPA_SIM=m
CONFIG_IFCVF=m
CONFIG_MLX5_VDPA=y
CONFIG_MLX5_VDPA_NET=m
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST_RING=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST_VDPA=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XEN_DEV_EVTCHN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XEN_GNTDEV_DMABUF=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XEN_GRANT_DEV_ALLOC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XEN_GRANT_DMA_ALLOC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PVCALLS_FRONTEND=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_XEN_PVCALLS_BACKEND is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XEN_SCSI_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_FRONT_PGDIR_SHBUF=m
# end of Xen driver support
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GREYBUS=m
CONFIG_GREYBUS_ES2=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_STAGING=y
CONFIG_PRISM2_USB=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
CONFIG_COMEDI_PCL812=m
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_AMPLC_DIO200_ISA=m
CONFIG_COMEDI_AMPLC_PC236_ISA=m
CONFIG_COMEDI_AMPLC_PC263_ISA=m
CONFIG_COMEDI_RTI800=m
CONFIG_COMEDI_RTI802=m
CONFIG_COMEDI_DAC02=m
CONFIG_COMEDI_DAS16M1=m
CONFIG_COMEDI_DAS08_ISA=m
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=m
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=m
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
CONFIG_COMEDI_DT2814=m
CONFIG_COMEDI_DT2815=m
CONFIG_COMEDI_DT2817=m
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_C6XDIGIO=m
CONFIG_COMEDI_MPC624=m
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
CONFIG_COMEDI_NI_AT_AO=m
CONFIG_COMEDI_NI_ATMIO=m
CONFIG_COMEDI_NI_ATMIO16D=m
CONFIG_COMEDI_NI_LABPC_ISA=m
CONFIG_COMEDI_PCMAD=m
CONFIG_COMEDI_PCMDA12=m
CONFIG_COMEDI_PCMMIO=m
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_PCI_DRIVERS=m
CONFIG_COMEDI_8255_PCI=m
CONFIG_COMEDI_ADDI_WATCHDOG=m
CONFIG_COMEDI_ADDI_APCI_1032=m
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3120=m
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=m
CONFIG_COMEDI_ADL_PCI7X3X=m
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMEDI_ADV_PCI1720=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI1724=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMEDI_ADV_PCI1760=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMEDI_ADV_PCI_DIO=m
CONFIG_COMEDI_AMPLC_DIO200_PCI=m
CONFIG_COMEDI_AMPLC_PC236_PCI=m
CONFIG_COMEDI_AMPLC_PC263_PCI=m
CONFIG_COMEDI_AMPLC_PCI224=m
CONFIG_COMEDI_AMPLC_PCI230=m
CONFIG_COMEDI_CONTEC_PCI_DIO=m
CONFIG_COMEDI_DAS08_PCI=m
CONFIG_COMEDI_DT3000=m
CONFIG_COMEDI_DYNA_PCI10XX=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_MF6X4=m
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=m
CONFIG_COMEDI_CB_PCIDAS=m
CONFIG_COMEDI_CB_PCIDDA=m
CONFIG_COMEDI_CB_PCIMDAS=m
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_LABPC_PCI=m
CONFIG_COMEDI_NI_PCIDIO=m
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S626=m
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIOCMD=m
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
CONFIG_COMEDI_NI_DAQ_700_CS=m
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_NI_USB6501=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_8254=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_8255_SA=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_COMEDI_NI_ROUTING=m
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_RTL8723BS=m
CONFIG_R8712U=m
CONFIG_R8188EU=m
CONFIG_88EU_AP_MODE=y
CONFIG_RTS5208=m
CONFIG_VT6655=m
CONFIG_VT6656=m
#
# IIO staging drivers
#
#
# Accelerometers
#
CONFIG_ADIS16203=m
CONFIG_ADIS16240=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD7816=m
CONFIG_AD7280=m
# end of Analog to digital converters
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m
# end of Analog digital bi-direction converters
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7746=m
# end of Capacitance to digital converters
#
# Direct Digital Synthesis
#
CONFIG_AD9832=m
CONFIG_AD9834=m
# end of Direct Digital Synthesis
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
# end of Network Analyzer, Impedance Converters
#
# Active energy metering IC
#
CONFIG_ADE7854=m
CONFIG_ADE7854_I2C=m
CONFIG_ADE7854_SPI=m
# end of Active energy metering IC
#
# Resolver to digital converters
#
CONFIG_AD2S1210=m
# end of Resolver to digital converters
# end of IIO staging drivers
CONFIG_FB_SM750=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB_EMXX=m
CONFIG_MFD_NVEC=m
CONFIG_KEYBOARD_NVEC=m
CONFIG_SERIO_NVEC_PS2=m
CONFIG_NVEC_POWER=m
CONFIG_NVEC_PAZ00=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_STAGING_MEDIA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_ALLEGRO_DVT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIDEO_HANTRO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_HANTRO_IMX8M=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIDEO_HANTRO_ROCKCHIP=y
CONFIG_VIDEO_MESON_VDEC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_ROCKCHIP_VDEC=m
CONFIG_VIDEO_SUNXI=y
CONFIG_VIDEO_SUNXI_CEDRUS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_TEGRA_VDE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_TEGRA=m
CONFIG_VIDEO_TEGRA_TPG=y
CONFIG_VIDEO_ROCKCHIP_ISP1=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Android
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ASHMEM is not set
# CONFIG_ION is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Android
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_STAGING_BOARD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LTE_GDM724X=m
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_GS_FPGABOOT=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_UNISYSSPAR=y
CONFIG_FB_TFT=m
CONFIG_FB_TFT_AGM1264K_FL=m
CONFIG_FB_TFT_BD663474=m
CONFIG_FB_TFT_HX8340BN=m
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
CONFIG_FB_TFT_HX8357D=m
CONFIG_FB_TFT_ILI9163=m
CONFIG_FB_TFT_ILI9320=m
CONFIG_FB_TFT_ILI9325=m
CONFIG_FB_TFT_ILI9340=m
CONFIG_FB_TFT_ILI9341=m
CONFIG_FB_TFT_ILI9481=m
CONFIG_FB_TFT_ILI9486=m
CONFIG_FB_TFT_PCD8544=m
CONFIG_FB_TFT_RA8875=m
CONFIG_FB_TFT_S6D02A1=m
CONFIG_FB_TFT_S6D1121=m
CONFIG_FB_TFT_SEPS525=m
CONFIG_FB_TFT_SH1106=m
CONFIG_FB_TFT_SSD1289=m
CONFIG_FB_TFT_SSD1305=m
CONFIG_FB_TFT_SSD1306=m
CONFIG_FB_TFT_SSD1331=m
CONFIG_FB_TFT_SSD1351=m
CONFIG_FB_TFT_ST7735R=m
CONFIG_FB_TFT_ST7789V=m
CONFIG_FB_TFT_TINYLCD=m
CONFIG_FB_TFT_TLS8204=m
CONFIG_FB_TFT_UC1611=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
CONFIG_FB_TFT_WATTEROTT=m
CONFIG_FSL_DPAA2=y
CONFIG_FSL_DPAA2_ETHSW=m
CONFIG_MOST_COMPONENTS=m
CONFIG_MOST_NET=m
CONFIG_MOST_SOUND=m
CONFIG_MOST_VIDEO=m
CONFIG_MOST_DIM2=m
CONFIG_MOST_I2C=m
CONFIG_KS7010=m
CONFIG_GREYBUS_AUDIO=m
CONFIG_GREYBUS_AUDIO_APB_CODEC=m
CONFIG_GREYBUS_BOOTROM=m
CONFIG_GREYBUS_FIRMWARE=m
CONFIG_GREYBUS_HID=m
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_POWER=m
CONFIG_GREYBUS_RAW=m
CONFIG_GREYBUS_VIBRATOR=m
CONFIG_GREYBUS_BRIDGED_PHY=m
CONFIG_GREYBUS_GPIO=m
CONFIG_GREYBUS_I2C=m
CONFIG_GREYBUS_PWM=m
CONFIG_GREYBUS_SDIO=m
CONFIG_GREYBUS_SPI=m
CONFIG_GREYBUS_UART=m
CONFIG_GREYBUS_USB=m
CONFIG_BCM_VIDEOCORE=m
CONFIG_BCM2835_VCHIQ=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SND_BCM2835=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VIDEO_BCM2835=m
CONFIG_BCM2835_VCHIQ_MMAL=m
CONFIG_PI433=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Gasket devices
#
CONFIG_STAGING_GASKET_FRAMEWORK=m
CONFIG_STAGING_APEX_DRIVER=m
# end of Gasket devices
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XIL_AXIS_FIFO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FIELDBUS_DEV=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HMS_ANYBUSS_BUS=m
CONFIG_ARCX_ANYBUS_CONTROLLER=m
CONFIG_HMS_PROFINET=m
CONFIG_KPC2000=y
CONFIG_KPC2000_CORE=m
CONFIG_KPC2000_SPI=m
CONFIG_KPC2000_I2C=m
CONFIG_KPC2000_DMA=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QLGE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_WFX=m
CONFIG_PHY_HI3670_USB=m
CONFIG_SPMI_HISI3670=m
CONFIG_MFD_HI6421_SPMI=m
CONFIG_REGULATOR_HI6421V600=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_GOLDFISH is not set
CONFIG_CHROME_PLATFORMS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CHROMEOS_TBMC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CROS_EC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_RPMSG=m
CONFIG_CROS_EC_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CROS_EC_PROTO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CROS_KBD_LED_BACKLIGHT=m
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LIGHTBAR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CROS_EC_VBC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CROS_EC_DEBUGFS=m
CONFIG_CROS_EC_SENSORHUB=m
CONFIG_CROS_EC_SYSFS=m
CONFIG_CROS_EC_TYPEC=m
CONFIG_CROS_USBPD_LOGGER=m
CONFIG_CROS_USBPD_NOTIFY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
CONFIG_MLXREG_IO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MLXBF_TMFIFO=m
CONFIG_MLXBF_BOOTCTL=m
CONFIG_HAVE_CLK=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_WM831X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# Clock driver for ARM Reference designs
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ICST=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CLK_SP810=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CLK_VEXPRESS_OSC=m
# end of Clock driver for ARM Reference designs
CONFIG_COMMON_CLK_MAX77686=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MAX9485=m
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_HI655X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_SCMI=m
CONFIG_COMMON_CLK_SCPI=m
CONFIG_COMMON_CLK_SI5341=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_SI5351=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_SI514=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_SI544=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_SI570=m
CONFIG_COMMON_CLK_BM1880=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_CDCE706=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_CDCE925=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_CS2000_CP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_FSL_SAI=y
CONFIG_COMMON_CLK_S2MPS11=m
CONFIG_CLK_TWL6040=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CLK_QORIQ=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CLK_LS1028A_PLLDIG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_XGENE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_LOCHNAGAR=m
CONFIG_COMMON_CLK_PALMAS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_PWM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_VC5=m
CONFIG_COMMON_CLK_BD718XX=m
CONFIG_COMMON_CLK_FIXED_MMIO=y
CONFIG_CLK_ACTIONS=y
CONFIG_CLK_OWL_S500=y
CONFIG_CLK_OWL_S700=y
CONFIG_CLK_OWL_S900=y
CONFIG_CLK_BCM2711_DVP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CLK_BCM2835=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CLK_BCM_NS2=y
CONFIG_CLK_BCM_SR=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CLK_RASPBERRYPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_HI3516CV300=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_HI3519=y
CONFIG_COMMON_CLK_HI3660=y
CONFIG_COMMON_CLK_HI3670=y
CONFIG_COMMON_CLK_HI3798CV200=y
CONFIG_COMMON_CLK_HI6220=y
CONFIG_RESET_HISI=y
CONFIG_STUB_CLK_HI6220=y
CONFIG_STUB_CLK_HI3660=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MXC_CLK=m
CONFIG_MXC_CLK_SCU=m
CONFIG_CLK_IMX8MM=m
CONFIG_CLK_IMX8MN=m
CONFIG_CLK_IMX8MP=m
CONFIG_CLK_IMX8MQ=m
CONFIG_CLK_IMX8QXP=m
CONFIG_TI_SCI_CLK=m
CONFIG_TI_SCI_CLK_PROBE_FROM_FW=y
CONFIG_TI_SYSCON_CLK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Clock driver for MediaTek SoC
#
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2712=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_MT2712_BDPSYS=y
CONFIG_COMMON_CLK_MT2712_IMGSYS=y
CONFIG_COMMON_CLK_MT2712_JPGDECSYS=y
CONFIG_COMMON_CLK_MT2712_MFGCFG=y
CONFIG_COMMON_CLK_MT2712_MMSYS=y
CONFIG_COMMON_CLK_MT2712_VDECSYS=y
CONFIG_COMMON_CLK_MT2712_VENCSYS=y
CONFIG_COMMON_CLK_MT6765=y
CONFIG_COMMON_CLK_MT6765_AUDIOSYS=y
CONFIG_COMMON_CLK_MT6765_CAMSYS=y
CONFIG_COMMON_CLK_MT6765_GCESYS=y
CONFIG_COMMON_CLK_MT6765_MMSYS=y
CONFIG_COMMON_CLK_MT6765_IMGSYS=y
CONFIG_COMMON_CLK_MT6765_VCODECSYS=y
CONFIG_COMMON_CLK_MT6765_MFGSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI0ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI0BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI1BSYS=y
CONFIG_COMMON_CLK_MT6765_MIPI2ASYS=y
CONFIG_COMMON_CLK_MT6765_MIPI2BSYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MT6779=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_MT6779_MMSYS=y
CONFIG_COMMON_CLK_MT6779_IMGSYS=y
CONFIG_COMMON_CLK_MT6779_IPESYS=y
CONFIG_COMMON_CLK_MT6779_CAMSYS=y
CONFIG_COMMON_CLK_MT6779_VDECSYS=y
CONFIG_COMMON_CLK_MT6779_VENCSYS=y
CONFIG_COMMON_CLK_MT6779_MFGCFG=y
CONFIG_COMMON_CLK_MT6779_AUDSYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MT6797=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_MT6797_MMSYS=y
CONFIG_COMMON_CLK_MT6797_IMGSYS=y
CONFIG_COMMON_CLK_MT6797_VDECSYS=y
CONFIG_COMMON_CLK_MT6797_VENCSYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MT7622=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_MT7622_ETHSYS=y
CONFIG_COMMON_CLK_MT7622_HIFSYS=y
CONFIG_COMMON_CLK_MT7622_AUDSYS=y
CONFIG_COMMON_CLK_MT8167=y
CONFIG_COMMON_CLK_MT8167_AUDSYS=y
CONFIG_COMMON_CLK_MT8167_IMGSYS=y
CONFIG_COMMON_CLK_MT8167_MFGCFG=y
CONFIG_COMMON_CLK_MT8167_MMSYS=y
CONFIG_COMMON_CLK_MT8167_VDECSYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MT8173=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_MT8173_MMSYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MT8183=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_MT8183_AUDIOSYS=y
CONFIG_COMMON_CLK_MT8183_CAMSYS=y
CONFIG_COMMON_CLK_MT8183_IMGSYS=y
CONFIG_COMMON_CLK_MT8183_IPU_CORE0=y
CONFIG_COMMON_CLK_MT8183_IPU_CORE1=y
CONFIG_COMMON_CLK_MT8183_IPU_ADL=y
CONFIG_COMMON_CLK_MT8183_IPU_CONN=y
CONFIG_COMMON_CLK_MT8183_MFGCFG=y
CONFIG_COMMON_CLK_MT8183_MMSYS=y
CONFIG_COMMON_CLK_MT8183_VDECSYS=y
CONFIG_COMMON_CLK_MT8183_VENCSYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MT8516=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_MT8516_AUDSYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Clock driver for MediaTek SoC
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# Clock support for Amlogic platforms
#
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MESON_REGMAP=y
CONFIG_COMMON_CLK_MESON_DUALDIV=y
CONFIG_COMMON_CLK_MESON_MPLL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_MESON_PHASE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MESON_PLL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_MESON_SCLK_DIV=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y
CONFIG_COMMON_CLK_MESON_AO_CLKC=y
CONFIG_COMMON_CLK_MESON_EE_CLKC=y
CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y
CONFIG_COMMON_CLK_GXBB=y
CONFIG_COMMON_CLK_AXG=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_COMMON_CLK_AXG_AUDIO=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_G12A=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Clock support for Amlogic platforms
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARMADA_AP_CP_HELPER=y
CONFIG_ARMADA_37XX_CLK=y
CONFIG_ARMADA_AP806_SYSCON=y
CONFIG_ARMADA_AP_CPU_CLK=y
CONFIG_ARMADA_CP110_SYSCON=y
CONFIG_QCOM_GDSC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCOM_RPMCC=y
CONFIG_COMMON_CLK_QCOM=m
CONFIG_QCOM_A53PLL=m
CONFIG_QCOM_CLK_APCS_MSM8916=m
CONFIG_QCOM_CLK_APCC_MSM8996=m
CONFIG_QCOM_CLK_RPM=m
CONFIG_QCOM_CLK_SMD_RPM=m
CONFIG_QCOM_CLK_RPMH=m
CONFIG_APQ_GCC_8084=m
CONFIG_APQ_MMCC_8084=m
CONFIG_IPQ_APSS_PLL=m
CONFIG_IPQ_APSS_6018=m
CONFIG_IPQ_GCC_4019=m
CONFIG_IPQ_GCC_6018=m
CONFIG_IPQ_GCC_806X=m
CONFIG_IPQ_LCC_806X=m
CONFIG_IPQ_GCC_8074=m
CONFIG_MSM_GCC_8660=m
CONFIG_MSM_GCC_8916=m
CONFIG_MSM_GCC_8939=m
CONFIG_MSM_GCC_8960=m
CONFIG_MSM_LCC_8960=m
CONFIG_MDM_GCC_9615=m
CONFIG_MDM_LCC_9615=m
CONFIG_MSM_MMCC_8960=m
CONFIG_MSM_GCC_8974=m
CONFIG_MSM_MMCC_8974=m
CONFIG_MSM_GCC_8994=m
CONFIG_MSM_GCC_8996=m
CONFIG_MSM_MMCC_8996=m
CONFIG_MSM_GCC_8998=m
CONFIG_MSM_GPUCC_8998=m
CONFIG_MSM_MMCC_8998=m
CONFIG_QCS_GCC_404=m
CONFIG_SC_DISPCC_7180=m
CONFIG_SC_GCC_7180=m
CONFIG_SC_LPASS_CORECC_7180=m
CONFIG_SC_GPUCC_7180=m
CONFIG_SC_MSS_7180=m
CONFIG_SC_VIDEOCC_7180=m
CONFIG_SDM_CAMCC_845=m
CONFIG_SDM_GCC_660=m
CONFIG_QCS_TURING_404=m
CONFIG_QCS_Q6SSTOP_404=m
CONFIG_SDM_GCC_845=m
CONFIG_SDM_GPUCC_845=m
CONFIG_SDM_VIDEOCC_845=m
CONFIG_SDM_DISPCC_845=m
CONFIG_SDM_LPASSCC_845=m
CONFIG_SM_DISPCC_8250=m
CONFIG_SM_GCC_8150=m
CONFIG_SM_GCC_8250=m
CONFIG_SM_GPUCC_8150=m
CONFIG_SM_GPUCC_8250=m
CONFIG_SM_VIDEOCC_8150=m
CONFIG_SM_VIDEOCC_8250=m
CONFIG_SPMI_PMIC_CLKDIV=m
CONFIG_QCOM_HFPLL=m
CONFIG_KPSS_XCC=m
CONFIG_CLK_RENESAS=y
CONFIG_CLK_R8A774A1=y
CONFIG_CLK_R8A774B1=y
CONFIG_CLK_R8A774C0=y
CONFIG_CLK_R8A774E1=y
CONFIG_CLK_R8A7795=y
CONFIG_CLK_R8A77960=y
CONFIG_CLK_R8A77961=y
CONFIG_CLK_R8A77965=y
CONFIG_CLK_R8A77970=y
CONFIG_CLK_R8A77980=y
CONFIG_CLK_R8A77990=y
CONFIG_CLK_R8A77995=y
CONFIG_CLK_R8A779A0=y
CONFIG_CLK_R9A06G032=y
CONFIG_CLK_RCAR_GEN3_CPG=y
CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
CONFIG_CLK_RENESAS_CPG_MSSR=y
CONFIG_CLK_RENESAS_DIV6=y
CONFIG_COMMON_CLK_ROCKCHIP=y
CONFIG_CLK_PX30=y
CONFIG_CLK_RV110X=y
CONFIG_CLK_RK3036=y
CONFIG_CLK_RK312X=y
CONFIG_CLK_RK3188=y
CONFIG_CLK_RK322X=y
CONFIG_CLK_RK3308=y
CONFIG_CLK_RK3328=y
CONFIG_CLK_RK3368=y
CONFIG_CLK_RK3399=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_CLK_SAMSUNG=y
CONFIG_EXYNOS_ARM64_COMMON_CLK=y
CONFIG_EXYNOS_AUDSS_CLK_CON=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPRD_COMMON_CLK=y
CONFIG_SPRD_SC9860_CLK=y
CONFIG_SPRD_SC9863A_CLK=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
CONFIG_SUNXI_CCU=y
CONFIG_SUN50I_A64_CCU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SUN50I_A100_CCU=y
CONFIG_SUN50I_A100_R_CCU=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SUN50I_H6_CCU=y
CONFIG_SUN50I_H6_R_CCU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SUN8I_A83T_CCU=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SUN8I_H3_CCU=y
CONFIG_SUN8I_DE2_CCU=y
CONFIG_SUN8I_R_CCU=y
CONFIG_CLK_TEGRA_BPMP=y
CONFIG_TEGRA_CLK_DFLL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CLK_UNIPHIER=y
CONFIG_COMMON_CLK_ZYNQMP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HWSPINLOCK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HWSPINLOCK_OMAP=m
CONFIG_HWSPINLOCK_QCOM=m
CONFIG_HWSPINLOCK_SPRD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_ACPI=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_DW_APB_TIMER=y
CONFIG_DW_APB_TIMER_OF=y
CONFIG_ROCKCHIP_TIMER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_OWL_TIMER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TEGRA_TIMER=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
CONFIG_FSL_ERRATUM_A008585=y
CONFIG_HISILICON_ERRATUM_161010101=y
CONFIG_ARM64_ERRATUM_858921=y
CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
CONFIG_ARM_TIMER_SP804=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SYS_SUPPORTS_SH_CMT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MTK_TIMER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SPRD_TIMER=y
CONFIG_SYS_SUPPORTS_SH_TMU=y
CONFIG_SH_TIMER_CMT=y
CONFIG_SH_TIMER_TMU=y
CONFIG_TIMER_IMX_SYS_CTR=y
CONFIG_MICROCHIP_PIT64B=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_ARM_MHU=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IMX_MBOX=m
CONFIG_PLATFORM_MHU=m
CONFIG_PL320_MBOX=y
CONFIG_ARMADA_37XX_RWTM_MBOX=m
CONFIG_OMAP2PLUS_MBOX=m
CONFIG_OMAP_MBOX_KFIFO_SIZE=256
CONFIG_ROCKCHIP_MBOX=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PCC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ALTERA_MBOX=m
CONFIG_BCM2835_MBOX=m
CONFIG_TI_MESSAGE_MANAGER=y
CONFIG_HI3660_MBOX=m
CONFIG_HI6220_MBOX=m
CONFIG_MAILBOX_TEST=m
CONFIG_QCOM_APCS_IPC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TEGRA_HSP_MBOX=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XGENE_SLIMPRO_MBOX=m
CONFIG_BCM_PDC_MBOX=m
CONFIG_BCM_FLEXRM_MBOX=m
CONFIG_MTK_CMDQ_MBOX=y
CONFIG_ZYNQMP_IPI_MBOX=y
CONFIG_SUN6I_MSGBOX=y
CONFIG_SPRD_MBOX=m
CONFIG_QCOM_IPCC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
CONFIG_ROCKCHIP_IOMMU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SUN50I_IOMMU=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TEGRA_IOMMU_SMMU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EXYNOS_IOMMU=y
# CONFIG_EXYNOS_IOMMU_DEBUG is not set
CONFIG_IPMMU_VMSA=y
CONFIG_ARM_SMMU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_SMMU_V3=m
CONFIG_ARM_SMMU_V3_SVA=y
CONFIG_MTK_IOMMU=y
CONFIG_QCOM_IOMMU=y
CONFIG_VIRTIO_IOMMU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Remoteproc drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
CONFIG_IMX_REMOTEPROC=m
CONFIG_MTK_SCP=m
CONFIG_QCOM_PIL_INFO=m
CONFIG_QCOM_RPROC_COMMON=m
CONFIG_QCOM_Q6V5_COMMON=m
CONFIG_QCOM_Q6V5_ADSP=m
CONFIG_QCOM_Q6V5_MSS=m
CONFIG_QCOM_Q6V5_PAS=m
CONFIG_QCOM_Q6V5_WCSS=m
CONFIG_QCOM_SYSMON=m
CONFIG_QCOM_WCNSS_PIL=m
CONFIG_TI_K3_DSP_REMOTEPROC=m
CONFIG_TI_K3_R5_REMOTEPROC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RPMSG_CHAR=m
CONFIG_RPMSG_MTK_SCP=m
CONFIG_RPMSG_QCOM_GLINK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RPMSG_QCOM_GLINK_RPM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RPMSG_QCOM_GLINK_SMEM=m
CONFIG_RPMSG_QCOM_SMD=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_CADENCE=m
CONFIG_SOUNDWIRE_INTEL=m
CONFIG_SOUNDWIRE_QCOM=m
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# SOC (System On Chip) specific Drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_OWL_PM_DOMAINS_HELPER=y
CONFIG_OWL_PM_DOMAINS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Amlogic SoC drivers
#
CONFIG_MESON_CANVAS=m
CONFIG_MESON_CLK_MEASURE=y
CONFIG_MESON_GX_SOCINFO=y
CONFIG_MESON_GX_PM_DOMAINS=y
CONFIG_MESON_EE_PM_DOMAINS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MESON_SECURE_PM_DOMAINS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MESON_MX_SOCINFO=y
# end of Amlogic SoC drivers
#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers
#
# Broadcom SoC drivers
#
CONFIG_BCM2835_POWER=y
CONFIG_SOC_BRCMSTB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BRCMSTB_PM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FSL_DPAA=y
# CONFIG_FSL_DPAA_CHECKING is not set
CONFIG_FSL_BMAN_TEST=m
CONFIG_FSL_BMAN_TEST_API=y
CONFIG_FSL_QMAN_TEST=m
CONFIG_FSL_QMAN_TEST_API=y
CONFIG_FSL_QMAN_TEST_STASH=y
CONFIG_QUICC_ENGINE=y
CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_QE_TDM=y
CONFIG_FSL_GUTS=y
CONFIG_FSL_MC_DPIO=m
CONFIG_DPAA2_CONSOLE=y
CONFIG_FSL_RCPM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IMX_GPCV2_PM_DOMAINS=y
CONFIG_SOC_IMX8M=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of i.MX SoC drivers
#
# MediaTek SoC drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MTK_CMDQ=y
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=m
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_MMSYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of MediaTek SoC drivers
#
# Qualcomm SoC drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCOM_AOSS_QMP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QCOM_COMMAND_DB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCOM_CPR=m
CONFIG_QCOM_GENI_SE=m
CONFIG_QCOM_GSBI=m
CONFIG_QCOM_LLCC=m
CONFIG_QCOM_KRYO_L2_ACCESSORS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QCOM_MDT_LOADER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCOM_OCMEM=m
CONFIG_QCOM_PDR_HELPERS=m
CONFIG_QCOM_QMI_HELPERS=m
CONFIG_QCOM_RMTFS_MEM=m
CONFIG_QCOM_RPMH=y
CONFIG_QCOM_RPMHPD=m
CONFIG_QCOM_RPMPD=m
CONFIG_QCOM_SMEM=m
CONFIG_QCOM_SMD_RPM=m
CONFIG_QCOM_SMEM_STATE=y
CONFIG_QCOM_SMP2P=m
CONFIG_QCOM_SMSM=m
CONFIG_QCOM_SOCINFO=m
CONFIG_QCOM_WCNSS_CTRL=m
CONFIG_QCOM_APR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Qualcomm SoC drivers
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SOC_RENESAS=y
CONFIG_ARCH_RCAR_GEN3=y
CONFIG_ARCH_R8A77995=y
CONFIG_ARCH_R8A77990=y
CONFIG_ARCH_R8A77950=y
CONFIG_ARCH_R8A77951=y
CONFIG_ARCH_R8A77965=y
CONFIG_ARCH_R8A77960=y
CONFIG_ARCH_R8A77961=y
CONFIG_ARCH_R8A77980=y
CONFIG_ARCH_R8A77970=y
CONFIG_ARCH_R8A779A0=y
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A774E1=y
CONFIG_ARCH_R8A774A1=y
CONFIG_ARCH_R8A774B1=y
CONFIG_RST_RCAR=y
CONFIG_SYSC_RCAR=y
CONFIG_SYSC_R8A77995=y
CONFIG_SYSC_R8A77990=y
CONFIG_SYSC_R8A7795=y
CONFIG_SYSC_R8A77965=y
CONFIG_SYSC_R8A77960=y
CONFIG_SYSC_R8A77961=y
CONFIG_SYSC_R8A77980=y
CONFIG_SYSC_R8A77970=y
CONFIG_SYSC_R8A779A0=y
CONFIG_SYSC_R8A774C0=y
CONFIG_SYSC_R8A774E1=y
CONFIG_SYSC_R8A774A1=y
CONFIG_SYSC_R8A774B1=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ROCKCHIP_GRF=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ROCKCHIP_IODOMAIN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_SOC_SAMSUNG=y
CONFIG_EXYNOS_CHIPID=y
CONFIG_EXYNOS_PMU=y
CONFIG_EXYNOS_PM_DOMAINS=y
CONFIG_SUNXI_SRAM=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_TEGRA_194_SOC=y
CONFIG_ARCH_TEGRA_234_SOC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SOC_TEGRA_FUSE=y
CONFIG_SOC_TEGRA_FLOWCTRL=y
CONFIG_SOC_TEGRA_PMC=y
CONFIG_SOC_TEGRA_POWERGATE_BPMP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_K3_AM6_SOC=y
CONFIG_ARCH_K3_J721E_SOC=y
CONFIG_SOC_TI=y
CONFIG_TI_SCI_PM_DOMAINS=m
CONFIG_TI_K3_RINGACC=y
CONFIG_TI_K3_SOCINFO=y
CONFIG_TI_PRUSS=m
CONFIG_TI_SCI_INTA_MSI_DOMAIN=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Xilinx SoC drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XILINX_VCU=m
CONFIG_ZYNQMP_POWER=y
CONFIG_ZYNQMP_PM_DOMAINS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Xilinx SoC drivers
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SOC_ZTE=y
CONFIG_ZX2967_PM_DOMAINS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of SOC (System On Chip) specific Drivers
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DEVFREQ_GOV_PASSIVE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# DEVFREQ Drivers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
CONFIG_ARM_IMX_BUS_DEVFREQ=m
CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
CONFIG_ARM_TEGRA_DEVFREQ=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM_RK3399_DMC_DEVFREQ=m
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=m
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EXTCON_ARIZONA=m
CONFIG_EXTCON_FSA9480=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EXTCON_GPIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_MAX77843=m
CONFIG_EXTCON_MAX8997=m
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_QCOM_SPMI_MISC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EXTCON_USBC_CROS_EC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEMORY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_PL172_MPMC=m
CONFIG_BRCMSTB_DPFE=y
CONFIG_MTK_SMI=y
CONFIG_RENESAS_RPCIF=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TEGRA_MC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TEGRA210_EMC_TABLE=y
CONFIG_TEGRA210_EMC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_BUFFER_DMA=m
CONFIG_IIO_BUFFER_DMAENGINE=m
CONFIG_IIO_BUFFER_HW_CONSUMER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_CONFIGFS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IIO_TRIGGERED_EVENT=m
#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16209=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ADXL372=m
CONFIG_ADXL372_SPI=m
CONFIG_ADXL372_I2C=m
CONFIG_BMA220=m
CONFIG_BMA400=m
CONFIG_BMA400_I2C=m
CONFIG_BMA400_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DA280=m
CONFIG_DA311=m
CONFIG_DMARD06=m
CONFIG_DMARD09=m
CONFIG_DMARD10=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_SENSOR_ACCEL_3D=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
CONFIG_KXSD9=m
CONFIG_KXSD9_SPI=m
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=m
CONFIG_MMA7660=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MXC4005=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MXC6255=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCA3000=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m
# end of Accelerometers
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD7091R5=m
CONFIG_AD7124=m
CONFIG_AD7192=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AD7266=m
CONFIG_AD7291=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD7292=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AD7298=m
CONFIG_AD7476=m
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD7606_IFACE_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD7766=m
CONFIG_AD7768_1=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AD7780=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD7949=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AD799X=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD9467=m
CONFIG_ADI_AXI_ADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AXP20X_ADC=m
CONFIG_AXP288_ADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BCM_IPROC_ADC=m
CONFIG_BERLIN2_ADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CC10001_ADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CPCAP_ADC=m
CONFIG_DA9150_GPADC=m
CONFIG_DLN2_ADC=m
CONFIG_ENVELOPE_DETECTOR=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EXYNOS_ADC=m
CONFIG_HI8435=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HX711=m
CONFIG_INA2XX_ADC=m
CONFIG_IMX7D_ADC=m
CONFIG_LP8788_ADC=m
CONFIG_LTC2471=m
CONFIG_LTC2485=m
CONFIG_LTC2496=m
CONFIG_LTC2497=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MAX1027=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAX11100=m
CONFIG_MAX1118=m
CONFIG_MAX1241=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MAX1363=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAX9611=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MCP320X=m
CONFIG_MCP3422=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MCP3911=m
CONFIG_MEDIATEK_MT6577_AUXADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEN_Z188_ADC=m
CONFIG_MESON_SARADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MP2629_ADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NAU7802=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PALMAS_GPADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCOM_SPMI_ADC5=m
CONFIG_RN5T618_ADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ROCKCHIP_SARADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SC27XX_ADC=m
CONFIG_SD_ADC_MODULATOR=m
CONFIG_STMPE_ADC=m
CONFIG_SUN4I_GPADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TI_ADC084S021=m
CONFIG_TI_ADC12138=m
CONFIG_TI_ADC108S102=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TI_ADC128S052=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TI_ADC161S626=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TI_ADS1015=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TI_ADS7950=m
CONFIG_TI_ADS8344=m
CONFIG_TI_ADS8688=m
CONFIG_TI_ADS124S08=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TI_AM335X_ADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TI_TLC4541=m
CONFIG_TWL4030_MADC=m
CONFIG_TWL6030_GPADC=m
CONFIG_VF610_ADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VIPERBOARD_ADC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XILINX_XADC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Analog to digital converters
#
# Analog Front Ends
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_RESCALE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Analog Front Ends
#
# Amplifiers
#
CONFIG_AD8366=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HMC425=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Amplifiers
#
# Chemical Sensors
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ATLAS_PH_SENSOR=m
CONFIG_ATLAS_EZO_SENSOR=m
CONFIG_BME680=m
CONFIG_BME680_I2C=m
CONFIG_BME680_SPI=m
CONFIG_CCS811=m
CONFIG_IAQCORE=m
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=m
CONFIG_SCD30_I2C=m
CONFIG_SCD30_SERIAL=m
CONFIG_SENSIRION_SGP30=m
CONFIG_SPS30=m
CONFIG_VZ89X=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Chemical Sensors
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_MS_SENSORS_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=m
CONFIG_IIO_SSP_SENSORHUB=m
# end of SSP Sensor Common
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m
#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD5592R_BASE=m
CONFIG_AD5592R=m
CONFIG_AD5593R=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD5686=m
CONFIG_AD5686_SPI=m
CONFIG_AD5696_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AD5755=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD5758=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AD5761=m
CONFIG_AD5764=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD5770R=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AD5791=m
CONFIG_AD7303=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD8801=m
CONFIG_DPOT_DAC=m
CONFIG_DS4424=m
CONFIG_LTC1660=m
CONFIG_LTC2632=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_M62332=m
CONFIG_MAX517=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAX5821=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MCP4725=m
CONFIG_MCP4922=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TI_DAC082S085=m
CONFIG_TI_DAC5571=m
CONFIG_TI_DAC7311=m
CONFIG_TI_DAC7612=m
CONFIG_VF610_DAC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Digital to analog converters
#
# IIO dummy driver
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_SIMPLE_DUMMY=m
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of IIO dummy driver
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
# end of Clock Generator/Distribution
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ADF4371=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
CONFIG_ADIS16260=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ADXRS290=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ADXRS450=m
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FXAS21002C=m
CONFIG_FXAS21002C_I2C=m
CONFIG_FXAS21002C_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_SENSOR_GYRO_3D=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
CONFIG_ITG3200=m
# end of Digital gyroscope sensors
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=m
CONFIG_AFE4404=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAX30100=m
CONFIG_MAX30102=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Heart Rate Monitors
# end of Health Sensors
#
# Humidity sensors
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AM2315=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DHT11=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HDC100X=m
CONFIG_HDC2010=m
CONFIG_HID_SENSOR_HUMIDITY=m
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
CONFIG_HTU21=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SI7005=m
CONFIG_SI7020=m
# end of Humidity sensors
#
# Inertial measurement units
#
CONFIG_ADIS16400=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ADIS16460=m
CONFIG_ADIS16475=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ADIS16480=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_FXOS8700_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_KMX61=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INV_ICM42600=m
CONFIG_INV_ICM42600_I2C=m
CONFIG_INV_ICM42600_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_INV_MPU6050_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
CONFIG_IIO_ST_LSM6DSX_I3C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Inertial measurement units
CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=m
CONFIG_ADJD_S311=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ADUX1020=m
CONFIG_AL3010=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AL3320A=m
CONFIG_APDS9300=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_APDS9960=m
CONFIG_AS73211=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BH1750=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BH1780=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CM3605=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CM36651=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_GP2AP002=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GP2AP020A00F=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IQS621_ALS=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=m
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LV0104CS=m
CONFIG_MAX44000=m
CONFIG_MAX44009=m
CONFIG_NOA1305=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_OPT3001=m
CONFIG_PA12203001=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SI1133=m
CONFIG_SI1145=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_STK3310=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TCS3414=m
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TSL2772=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TSL4531=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_US5182D=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VCNL4000=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VCNL4035=m
CONFIG_VEML6030=m
CONFIG_VEML6070=m
CONFIG_VL6180=m
CONFIG_ZOPT2201=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Light sensors
#
# Magnetometer sensors
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AK8974=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AK8975=m
CONFIG_AK09911=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SENSORS_RM3100=m
CONFIG_SENSORS_RM3100_I2C=m
CONFIG_SENSORS_RM3100_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Magnetometer sensors
#
# Multiplexers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_MUX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Multiplexers
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors
#
# Triggers - standalone
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_HRTIMER_TRIGGER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IIO_INTERRUPT_TRIGGER=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IIO_SYSFS_TRIGGER=m
# end of Triggers - standalone
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=m
# end of Linear and angular position sensors
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Digital potentiometers
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_AD5272=m
CONFIG_DS1803=m
CONFIG_MAX5432=m
CONFIG_MAX5481=m
CONFIG_MAX5487=m
CONFIG_MCP4018=m
CONFIG_MCP4131=m
CONFIG_MCP4531=m
CONFIG_MCP41010=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TPL0102=m
# end of Digital potentiometers
#
# Digital potentiostats
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LMP91000=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Digital potentiostats
#
# Pressure sensors
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_IIO_CROS_EC_BARO=m
CONFIG_DLHL60D=m
CONFIG_DPS310=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HID_SENSOR_PRESS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HP03=m
CONFIG_ICP10100=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
CONFIG_MPL115_SPI=m
CONFIG_MPL3115=m
CONFIG_MS5611=m
CONFIG_MS5611_I2C=m
CONFIG_MS5611_SPI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MS5637=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_T5403=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Pressure sensors
#
# Lightning sensors
#
CONFIG_AS3935=m
# end of Lightning sensors
#
# Proximity and distance sensors
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ISL29501=m
CONFIG_LIDAR_LITE_V2=m
CONFIG_MB1232=m
CONFIG_PING=m
CONFIG_RFD77402=m
CONFIG_SRF04=m
CONFIG_SX9310=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SX9500=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SRF08=m
CONFIG_VCNL3020=m
CONFIG_VL53L0X_I2C=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Proximity and distance sensors
#
# Resolver to digital converters
#
CONFIG_AD2S90=m
CONFIG_AD2S1200=m
# end of Resolver to digital converters
#
# Temperature sensors
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IQS620AT_TEMP=m
CONFIG_LTC2983=m
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_HID_SENSOR_TEMP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MLX90614=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MLX90632=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TMP006=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TMP007=m
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
CONFIG_MAX31856=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Temperature sensors
CONFIG_NTB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NTB_MSI=y
CONFIG_NTB_IDT=m
CONFIG_NTB_SWITCHTEC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_TOOL=m
CONFIG_NTB_PERF=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NTB_MSI_TEST=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NTB_TRANSPORT=m
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
CONFIG_VME_TSI148=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VME_FAKE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# VME Board Drivers
#
CONFIG_VMIVME_7805=m
#
# VME Device Drivers
#
CONFIG_VME_USER=m
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PWM_DEBUG=y
CONFIG_PWM_ATMEL_HLCDC_PWM=m
CONFIG_PWM_BCM_IPROC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PWM_BCM2835=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PWM_BERLIN=m
CONFIG_PWM_BRCMSTB=m
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_FSL_FTM=m
CONFIG_PWM_HIBVT=m
CONFIG_PWM_IMX1=m
CONFIG_PWM_IMX27=m
CONFIG_PWM_IMX_TPM=m
CONFIG_PWM_IQS620A=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PWM_LP3943=m
CONFIG_PWM_MESON=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PWM_MTK_DISP=m
CONFIG_PWM_MEDIATEK=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PWM_PCA9685=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PWM_RCAR=m
CONFIG_PWM_RENESAS_TPU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PWM_SL28CPLD=m
CONFIG_PWM_SPRD=m
# CONFIG_PWM_STMPE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PWM_SUN4I=m
CONFIG_PWM_TEGRA=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PWM_TIECAP=m
CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_PWM_ZX=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_PM=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_GIC_V3_ITS_FSL_MC=y
CONFIG_ALPINE_MSI=y
CONFIG_AL_FIC=y
CONFIG_BCM7038_L1_IRQ=y
CONFIG_BRCMSTB_L2_IRQ=y
CONFIG_DW_APB_ICTL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HISILICON_IRQ_MBIGEN=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MADERA_IRQ=m
CONFIG_RENESAS_IRQC=y
CONFIG_IMX_GPCV2=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MVEBU_GICP=y
CONFIG_MVEBU_ICU=y
CONFIG_MVEBU_ODMI=y
CONFIG_MVEBU_PIC=y
CONFIG_MVEBU_SEI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LS_EXTIRQ=y
CONFIG_LS_SCFG_MSI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PARTITION_PERCPU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCOM_IRQ_COMBINER=y
CONFIG_IRQ_UNIPHIER_AIDET=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MESON_IRQ_GPIO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_QCOM_PDC=y
CONFIG_IMX_IRQSTEER=y
CONFIG_IMX_INTMUX=y
CONFIG_TI_SCI_INTR_IRQCHIP=y
CONFIG_TI_SCI_INTA_IRQCHIP=y
CONFIG_TI_PRUSS_INTC=m
CONFIG_MST_IRQ=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of IRQ chip support
CONFIG_IPACK_BUS=m
CONFIG_BOARD_TPCI200=m
CONFIG_SERIAL_IPOCTAL=m
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RESET_BERLIN=y
CONFIG_RESET_BRCMSTB=y
CONFIG_RESET_BRCMSTB_RESCAL=y
CONFIG_RESET_IMX7=m
CONFIG_RESET_INTEL_GW=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RESET_MESON=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RESET_MESON_AUDIO_ARB=m
CONFIG_RESET_QCOM_AOSS=m
CONFIG_RESET_QCOM_PDC=m
CONFIG_RESET_RASPBERRYPI=m
CONFIG_RESET_SCMI=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SUNXI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RESET_TI_SCI=m
CONFIG_RESET_TI_SYSCON=m
CONFIG_RESET_UNIPHIER=y
CONFIG_RESET_UNIPHIER_GLUE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_COMMON_RESET_HI3660=y
CONFIG_COMMON_RESET_HI6220=y
CONFIG_RESET_TEGRA_BPMP=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
CONFIG_PHY_XGENE=m
CONFIG_PHY_SUN4I_USB=m
CONFIG_PHY_SUN6I_MIPI_DPHY=m
CONFIG_PHY_SUN9I_USB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_SUN50I_USB3=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_MESON8B_USB2=y
CONFIG_PHY_MESON_GXL_USB2=y
CONFIG_PHY_MESON_G12A_USB2=y
CONFIG_PHY_MESON_G12A_USB3_PCIE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_MESON_AXG_PCIE=y
CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG=y
CONFIG_PHY_BCM_SR_USB=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BCM_KONA_USB2_PHY=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_BCM_NS_USB2=m
CONFIG_PHY_BCM_NS_USB3=m
CONFIG_PHY_NS2_PCIE=y
CONFIG_PHY_NS2_USB_DRD=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_PHY_BRCM_USB=y
CONFIG_PHY_BCM_SR_PCIE=y
CONFIG_PHY_CADENCE_TORRENT=m
CONFIG_PHY_CADENCE_DPHY=m
CONFIG_PHY_CADENCE_SIERRA=m
CONFIG_PHY_CADENCE_SALVO=m
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_MIPI_DPHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_HI6220_USB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_HI3660_USB=m
CONFIG_PHY_HISTB_COMBPHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_HISI_INNO_USB2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_BERLIN_SATA=m
CONFIG_PHY_BERLIN_USB=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_MVEBU_A3700_COMPHY=y
CONFIG_PHY_MVEBU_A3700_UTMI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_MVEBU_A38X_COMPHY=m
CONFIG_PHY_MVEBU_CP110_COMPHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_MTK_TPHY=m
CONFIG_PHY_MTK_UFS=m
CONFIG_PHY_MTK_XSPHY=m
CONFIG_PHY_MTK_HDMI=m
CONFIG_PHY_CPCAP_USB=m
CONFIG_PHY_MAPPHONE_MDM6600=m
CONFIG_PHY_OCELOT_SERDES=m
CONFIG_PHY_QCOM_APQ8064_SATA=m
CONFIG_PHY_QCOM_IPQ4019_USB=m
CONFIG_PHY_QCOM_IPQ806X_SATA=m
CONFIG_PHY_QCOM_PCIE2=m
CONFIG_PHY_QCOM_QMP=m
CONFIG_PHY_QCOM_QUSB2=m
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_QCOM_USB_HS_28NM=m
CONFIG_PHY_QCOM_USB_SS=m
CONFIG_PHY_QCOM_IPQ806X_USB=m
CONFIG_PHY_RCAR_GEN2=m
CONFIG_PHY_RCAR_GEN3_PCIE=m
CONFIG_PHY_RCAR_GEN3_USB2=m
CONFIG_PHY_RCAR_GEN3_USB3=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_ROCKCHIP_DP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_ROCKCHIP_DPHY_RX0=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_ROCKCHIP_EMMC=m
CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
CONFIG_PHY_ROCKCHIP_INNO_USB2=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_ROCKCHIP_TYPEC=m
CONFIG_PHY_ROCKCHIP_USB=m
CONFIG_PHY_EXYNOS_DP_VIDEO=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_EXYNOS_PCIE=y
CONFIG_PHY_SAMSUNG_UFS=m
CONFIG_PHY_SAMSUNG_USB2=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_EXYNOS5_USBDRD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_UNIPHIER_USB2=m
CONFIG_PHY_UNIPHIER_USB3=m
CONFIG_PHY_UNIPHIER_PCIE=m
CONFIG_PHY_UNIPHIER_AHCI=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_TEGRA_XUSB=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_TEGRA194_P2U=m
CONFIG_PHY_AM654_SERDES=m
CONFIG_PHY_J721E_WIZ=m
CONFIG_OMAP_USB2=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PHY_TUSB1210=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PHY_TI_GMII_SEL=m
CONFIG_PHY_INTEL_KEEMBAY_EMMC=m
CONFIG_PHY_XILINX_ZYNQMP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of PHY Subsystem
CONFIG_POWERCAP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IDLE_INJECT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MCB=m
CONFIG_MCB_PCI=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MCB_LPC=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Performance monitor support
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_CCI_PMU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM_CCI400_PMU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_CCI5xx_PMU=y
CONFIG_ARM_CCN=m
CONFIG_ARM_CMN=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARM_PMU=y
CONFIG_ARM_PMU_ACPI=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_SMMU_V3_PMU=m
CONFIG_ARM_DSU_PMU=m
CONFIG_FSL_IMX8_DDR_PMU=m
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_THUNDERX2_PMU=m
CONFIG_XGENE_PMU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARM_SPE_PMU=m
CONFIG_HISI_PMU=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Performance monitor support
CONFIG_RAS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_USB4=m
# CONFIG_USB4_DEBUGFS_WRITE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Android
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Android
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LIBNVDIMM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_OF_PMEM=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_HMEM=m
CONFIG_DEV_DAX_HMEM_DEVICES=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DEV_DAX_KMEM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DEV_DAX_PMEM_COMPAT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NVMEM_IMX_IIM=m
CONFIG_NVMEM_IMX_OCOTP=m
CONFIG_NVMEM_IMX_OCOTP_SCU=m
CONFIG_MTK_EFUSE=m
CONFIG_QCOM_QFPROM=m
CONFIG_NVMEM_SPMI_SDAM=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ROCKCHIP_EFUSE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ROCKCHIP_OTP=m
CONFIG_NVMEM_BCM_OCOTP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NVMEM_SUNXI_SID=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_UNIPHIER_EFUSE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MESON_EFUSE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MESON_MX_EFUSE=m
CONFIG_NVMEM_SNVS_LPGPR=m
CONFIG_RAVE_SP_EEPROM=m
CONFIG_SC27XX_EFUSE=m
CONFIG_NVMEM_ZYNQMP=y
CONFIG_SPRD_EFUSE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# HW tracing support
#
CONFIG_STM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_STM_PROTO_BASIC=m
CONFIG_STM_PROTO_SYS_T=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FPGA=m
CONFIG_ALTERA_PR_IP_CORE=m
CONFIG_ALTERA_PR_IP_CORE_PLAT=m
CONFIG_FPGA_MGR_ALTERA_PS_SPI=m
CONFIG_FPGA_MGR_ALTERA_CVP=m
CONFIG_FPGA_MGR_STRATIX10_SOC=m
CONFIG_FPGA_MGR_XILINX_SPI=m
CONFIG_FPGA_MGR_ICE40_SPI=m
CONFIG_FPGA_MGR_MACHXO2_SPI=m
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_XILINX_PR_DECOUPLER=m
CONFIG_FPGA_REGION=m
CONFIG_OF_FPGA_REGION=m
CONFIG_FPGA_DFL=m
CONFIG_FPGA_DFL_FME=m
CONFIG_FPGA_DFL_FME_MGR=m
CONFIG_FPGA_DFL_FME_BRIDGE=m
CONFIG_FPGA_DFL_FME_REGION=m
CONFIG_FPGA_DFL_AFU=m
CONFIG_FPGA_DFL_PCI=m
CONFIG_FPGA_MGR_ZYNQMP_FPGA=m
CONFIG_FSI=m
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=m
CONFIG_FSI_MASTER_HUB=m
CONFIG_FSI_MASTER_ASPEED=m
CONFIG_FSI_SCOM=m
CONFIG_FSI_SBEFIFO=m
CONFIG_FSI_OCC=m
CONFIG_TEE=m
#
# TEE drivers
#
CONFIG_OPTEE=m
CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1
# end of TEE drivers
CONFIG_MULTIPLEXER=m
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_ADGS1408=m
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=m
# end of Multiplexer drivers
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PM_OPP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SIOX=m
CONFIG_SIOX_BUS_GPIO=m
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
CONFIG_SLIM_QCOM_NGD_CTRL=m
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_IMX=m
CONFIG_INTERCONNECT_IMX8MM=m
CONFIG_INTERCONNECT_IMX8MN=m
CONFIG_INTERCONNECT_IMX8MQ=m
CONFIG_INTERCONNECT_QCOM=y
CONFIG_INTERCONNECT_QCOM_BCM_VOTER=m
CONFIG_INTERCONNECT_QCOM_MSM8916=m
CONFIG_INTERCONNECT_QCOM_MSM8974=m
CONFIG_INTERCONNECT_QCOM_OSM_L3=m
CONFIG_INTERCONNECT_QCOM_QCS404=m
Virtio as module (no need to make it built in), enable VirtualBox guest modules
2021-02-23 13:28:34 +03:00
CONFIG_INTERCONNECT_QCOM_RPMH_POSSIBLE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INTERCONNECT_QCOM_RPMH=m
CONFIG_INTERCONNECT_QCOM_SC7180=m
CONFIG_INTERCONNECT_QCOM_SDM845=m
CONFIG_INTERCONNECT_QCOM_SM8150=m
CONFIG_INTERCONNECT_QCOM_SM8250=m
CONFIG_INTERCONNECT_QCOM_SMD_RPM=m
CONFIG_COUNTER=m
CONFIG_FTM_QUADDEC=m
CONFIG_MICROCHIP_TCB_CAPTURE=m
CONFIG_MOST=m
CONFIG_MOST_USB_HDM=m
CONFIG_MOST_CDEV=m
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_JBD2=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_JBD2_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FS_MBCACHE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XFS_SUPPORT_V4=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BTRFS_FS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BTRFS_FS_POSIX_ACL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_BTRFS_ASSERT is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_BTRFS_FS_REF_VERIFY is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_F2FS_CHECK_FS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZ4=y
CONFIG_F2FS_FS_ZSTD=y
CONFIG_F2FS_FS_LZORLE=y
# CONFIG_ZONEFS_FS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FS_DAX=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FS_DAX_PMD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_ENCRYPTION_INLINE_CRYPT is not set
# CONFIG_FS_VERITY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PRINT_QUOTA_WARNING is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FUSE_FS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CUSE=m
CONFIG_VIRTIO_FS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FUSE_DAX=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_OVERLAY_FS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
CONFIG_OVERLAY_FS_XINO_AUTO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_OVERLAY_FS_METACOPY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_FSCACHE_HISTOGRAM is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# DOS/FAT/EXFAT/NT Filesystems
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_FAT_FS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MSDOS_FS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of DOS/FAT/EXFAT/NT Filesystems
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TMPFS_INODE64 is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EFIVAR_FS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
CONFIG_ADFS_FS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ADFS_FS_RW is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_AFFS_FS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_JFFS2_RUBIN is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_JFFS2_CMODE_NONE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_JFFS2_CMODE_PRIORITY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_JFFS2_CMODE_SIZE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_JFFS2_CMODE_FAVOURLZO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_UBIFS_FS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_UBIFS_FS_AUTHENTICATION=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRAMFS_MTD=y
CONFIG_SQUASHFS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PSTORE_DEFLATE_COMPRESS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_PSTORE_842_COMPRESS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PSTORE_COMPRESS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PSTORE_BLK is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EROFS_FS=m
# CONFIG_EROFS_FS_DEBUG is not set
CONFIG_EROFS_FS_XATTR=y
CONFIG_EROFS_FS_POSIX_ACL=y
CONFIG_EROFS_FS_SECURITY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_EROFS_FS_ZIP is not set
CONFIG_AUFS_FS=m
CONFIG_AUFS_BRANCH_MAX_127=y
# CONFIG_AUFS_BRANCH_MAX_511 is not set
# CONFIG_AUFS_BRANCH_MAX_1023 is not set
# CONFIG_AUFS_BRANCH_MAX_32767 is not set
CONFIG_AUFS_SBILIST=y
# CONFIG_AUFS_HNOTIFY is not set
CONFIG_AUFS_EXPORT=y
CONFIG_AUFS_INO_T_64=y
CONFIG_AUFS_XATTR=y
# CONFIG_AUFS_FHSM is not set
# CONFIG_AUFS_RDU is not set
CONFIG_AUFS_DIRREN=y
CONFIG_AUFS_SHWH=y
# CONFIG_AUFS_BR_RAMFS is not set
# CONFIG_AUFS_BR_FUSE is not set
CONFIG_AUFS_BR_HFSPLUS=y
CONFIG_AUFS_BDEV_LOOP=y
# CONFIG_AUFS_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFS_V4_2_READ_PLUS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NFSD_V4_2_INTER_SSC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SUNRPC_DEBUG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_FS_SECURITY_LABEL=y
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_CIFS_SMB_DIRECT is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CIFS_FSCACHE=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
# CONFIG_AFS_DEBUG_CURSOR is not set
CONFIG_9P_FS=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_9P_FSCACHE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_NLS_CODEPAGE_437=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IO_WQ=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEYS_REQUEST_CACHE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PERSISTENT_KEYRINGS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TRUSTED_KEYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ENCRYPTED_KEYS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SECURITY_INFINIBAND=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_FORTIFY_SOURCE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_SECURITY_TOMOYO is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SECURITY_APPARMOR is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_SECURITY_LOADPIN is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SECURITY_ALTHA=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
# CONFIG_INTEGRITY_TRUSTED_KEYRING is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
CONFIG_LOAD_UEFI_KEYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IMA_WRITE_POLICY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_IMA_APPRAISE_MODSIG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_IMA_TRUSTED_KEYRING is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_EVM_ADD_XATTRS=y
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="yama,loadpin,integrity,selinux,apparmor,bpf,altha"
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XOR_BLOCKS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_KPP=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_ENGINE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_ECDH=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=m
CONFIG_CRYPTO_CURVE25519=m
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_AEGIS128=m
CONFIG_CRYPTO_AEGIS128_SIMD=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_NHPOLY1305=m
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_ESSIV=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_CRC32C=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_CRC32=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_BLAKE2S=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_STREEBOG=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DES=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DEFLATE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ZSTD=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_USER_API_AEAD=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
CONFIG_CRYPTO_STATS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_HASH_INFO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=m
CONFIG_CRYPTO_LIB_BLAKE2S=m
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA256=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_HW=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DEV_ALLWINNER=y
CONFIG_CRYPTO_DEV_SUN4I_SS=m
CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
CONFIG_CRYPTO_DEV_SUN8I_CE=m
# CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG is not set
CONFIG_CRYPTO_DEV_SUN8I_CE_HASH=y
CONFIG_CRYPTO_DEV_SUN8I_CE_PRNG=y
CONFIG_CRYPTO_DEV_SUN8I_CE_TRNG=y
CONFIG_CRYPTO_DEV_SUN8I_SS=y
# CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG is not set
CONFIG_CRYPTO_DEV_SUN8I_SS_PRNG=y
CONFIG_CRYPTO_DEV_SUN8I_SS_HASH=y
CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=m
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=m
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=m
CONFIG_CRYPTO_DEV_FSL_CAAM=m
# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_JR=m
CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
CONFIG_CRYPTO_DEV_FSL_CAAM_INTC=y
CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD=255
CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD=2048
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI=y
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m
CONFIG_CRYPTO_DEV_SAHARA=m
CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
CONFIG_CRYPTO_DEV_S5P=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_DEV_ATMEL_I2C=m
CONFIG_CRYPTO_DEV_ATMEL_ECC=m
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DEV_MXS_DCP=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_DEV_CPT=m
CONFIG_CAVIUM_CPT=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DEV_MARVELL=m
CONFIG_CRYPTO_DEV_MARVELL_CESA=m
CONFIG_CRYPTO_DEV_OCTEONTX_CPT=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_DEV_CAVIUM_ZIP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DEV_QCE=m
CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
CONFIG_CRYPTO_DEV_QCE_SHA=y
CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
CONFIG_CRYPTO_DEV_QCOM_RNG=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_DEV_ROCKCHIP=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DEV_ZYNQMP_AES=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_CRYPTO_DEV_VIRTIO=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DEV_BCM_SPU=m
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_CRYPTO_DEV_CCREE=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRYPTO_DEV_HISI_SEC=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRYPTO_DEV_HISI_SEC2=m
CONFIG_CRYPTO_DEV_HISI_QM=m
CONFIG_CRYPTO_DEV_HISI_ZIP=m
CONFIG_CRYPTO_DEV_HISI_HPRE=m
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_CRYPTO_DEV_SA2UL=m
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_TPM_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PKCS7_TEST_KEY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
#
# Certificates for signature checking
#
Minify build-time changes of configs, ship a config for UML, include all configs into SRPM
2020-12-30 19:47:16 +03:00
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SYSTEM_TRUSTED_KEYRING=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SYSTEM_TRUSTED_KEYS="certs/public.pem"
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
Update patches and configs for 5.10.47
2021-07-01 00:12:29 +03:00
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_RAID6_PQ=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RAID6_PQ_BENCHMARK=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LINEAR_RANGES=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=m
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_STMP_DEVICE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_INDIRECT_PIO=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_CRC32_SELFTEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
CONFIG_CRC4=m
CONFIG_CRC7=m
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LIBCRC32C=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CRC8=m
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_AUDIT_COMPAT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_ZLIB_DEFLATE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_LZ4_COMPRESS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_XZ_DEC_SPARC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DECOMPRESS_ZSTD=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DMA_OPS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_SWIOTLB=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DMA_NONCOHERENT_MMAP=y
CONFIG_DMA_COHERENT_POOL=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DMA_REMAP=y
CONFIG_DMA_DIRECT_REMAP=y
CONFIG_DMA_CMA=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DMA_PERNUMA_CMA is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Default contiguous memory area size:
#
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_CMA_SIZE_MBYTES=256
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GENERIC_VDSO_TIME_NS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_SPLIT=y
CONFIG_SG_POOL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MEMREGION=y
CONFIG_ARCH_STACKWALK=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SBITMAP=y
CONFIG_PARMAN=m
CONFIG_OBJAGG=m
# CONFIG_STRING_SELFTEST is not set
# end of Library routines
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PLDMFW=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=3
CONFIG_CONSOLE_LOGLEVEL_QUIET=3
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DEBUG_INFO_COMPRESSED is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_INFO_SPLIT is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DEBUG_INFO_DWARF4=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_INFO_BTF is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GDB_SCRIPTS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# Generic Kernel Debugging Instruments
#
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MAGIC_SYSRQ=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MAGIC_SYSRQ_SERIAL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_HONOUR_BLOCKLIST=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
Add support of Baikal-M SoCs Information about config values was taken from: From 804820df7bcb3d53a33ecd074b1eac277e938f24 Mon Sep 17 00:00:00 2001 From: Alexey Sheplyakov <asheplyakov@altlinux.org> Date: Thu, 4 Feb 2021 19:35:14 +0400 Subject: [PATCH] config-aarch64: adjusted for Baikal-M (MBM1.0 board) * DW_APB_TIMER=y, DW_APB_TIMER_OF=y: SoC clocks * SERIAL_8250_DW=y: serial console * I2C_DESIGNWARE_CORE=y, I2C_DESIGNWARE_PLATFORM=y: BMC (board management controller) and RTC (Real Time Clock) are connected via I2C. * GPIO_DWAPB=y: device (PCIe, PHY, etc) reset/configuration * RTC_DRV_PCF2127=y: RTC compiled in so the kernel automatically sets the system time from the hardware clock * TP_BMC=y: amongst other things handles the power button * DRM_BAIKAL_VDU=m, DRM_BAIKAL_HDMI=m: video unit and HDMI transmitter * CMA_SIZE_MBYTES=256: video display unit and GPU use system RAM, hence CMA should reserve enough (contiguous) memory. Note: CMA reserves memory during very early init, hence the size has to be hard-coded into CONFIG * MALI_MIDGARD=m: GPU driver, kernel side of proprietary mali blob. Note: kernel mode code is GPLv2, so it's fine to distribute it. * SENSORS_BT1_PVT=m: hardware temperature/voltage sensors * PCI_BAIKAL=m: PCIe root complex. Compiled as a module since takes ages (60 seconds or so) to probe the hardware. If compiled in substantially increases the boot time, and machine is completely unresponsive during probing PCIe. When built as a module probing executes concurrently with other boot activities (unless booting from a PCIe device) * STMMAC_ETH=m, STMMAC_PLATFORM=m, DWMAC_BAIKAL=m: Ethernet driver
2021-06-22 16:12:03 +03:00
CONFIG_HAVE_KCSAN_COMPILER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Generic Kernel Debugging Instruments
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_DEBUG_KERNEL=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DEBUG_MISC=y
add aarch64 support
2020-11-26 21:09:27 +00:00
#
# Memory Debugging
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PAGE_EXTENSION is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_PAGE_POISONING=y
CONFIG_PAGE_POISONING_NO_SANITY=y
CONFIG_PAGE_POISONING_ZERO=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_PAGE_REF is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
Minify build-time changes of configs, ship a config for UML, include all configs into SRPM
2020-12-30 19:47:16 +03:00
# CONFIG_DEBUG_WX is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_OBJECTS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_VM is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DEBUG_VM_PGTABLE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DEBUG_MEMORY_INIT is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
CONFIG_CC_HAS_KASAN_GENERIC=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_KASAN is not set
# end of Memory Debugging
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_DEBUG_SHIRQ is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# Debug Oops, Lockups and Hangs
add aarch64 support
2020-11-26 21:09:27 +00:00
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
add aarch64 support
2020-11-26 21:09:27 +00:00
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# Scheduler Debugging
#
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Scheduler Debugging
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_HAVE_DEBUG_BUGVERBOSE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
#
# Debug kernel data structures
#
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TRACER_MAX_TRACE=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_BOOTTIME_TRACING=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_IRQSOFF_TRACER is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_FTRACE_SYSCALLS=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_PROFILE_ALL_BRANCHES is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
Virtio as module (no need to make it built in), enable VirtualBox guest modules
2021-02-23 13:28:34 +03:00
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
CONFIG_TRACE_EVENT_INJECT=y
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_TRACEPOINT_BENCHMARK is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
CONFIG_SYNTH_EVENT_GEN_TEST=m
CONFIG_KPROBE_EVENT_GEN_TEST=m
CONFIG_HIST_TRIGGERS_DEBUG=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_AUXDISPLAY is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
CONFIG_SAMPLE_TRACE_PRINTK=m
# CONFIG_SAMPLE_TRACE_ARRAY is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
# CONFIG_SAMPLE_KDB is not set
CONFIG_SAMPLE_QMI_CLIENT=m
# CONFIG_SAMPLE_RPMSG_CLIENT is not set
# CONFIG_SAMPLE_CONFIGFS is not set
# CONFIG_SAMPLE_VFIO_MDEV_MTTY is not set
# CONFIG_SAMPLE_VFIO_MDEV_MDPY is not set
# CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB is not set
# CONFIG_SAMPLE_VFIO_MDEV_MBOCHS is not set
# CONFIG_SAMPLE_WATCHDOG is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
#
# arm64 Debugging
#
CONFIG_PID_IN_CONTEXTIDR=y
# CONFIG_DEBUG_EFI is not set
# CONFIG_ARM64_RELOC_TEST is not set
CONFIG_CORESIGHT=m
CONFIG_CORESIGHT_LINKS_AND_SINKS=m
CONFIG_CORESIGHT_LINK_AND_SINK_TMC=m
CONFIG_CORESIGHT_CATU=m
CONFIG_CORESIGHT_SINK_TPIU=m
CONFIG_CORESIGHT_SINK_ETBV10=m
CONFIG_CORESIGHT_SOURCE_ETM4X=m
CONFIG_CORESIGHT_STM=m
CONFIG_CORESIGHT_CPU_DEBUG=m
CONFIG_CORESIGHT_CTI=m
CONFIG_CORESIGHT_CTI_INTEGRATION_REGS=y
# end of arm64 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_RUNTIME_TESTING_MENU=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_LKDTM is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_TEST_LIST_SORT is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TEST_MIN_HEAP is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_REED_SOLOMON_TEST is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_ATOMIC64_SELFTEST is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_ASYNC_RAID6_TEST is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_TEST_HEXDUMP is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TEST_STRING_HELPERS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_PARMAN is not set
# CONFIG_TEST_LKM is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TEST_BITOPS is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_TEST_VMALLOC is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TEST_USER_COPY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TEST_UDELAY is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_OBJAGG is not set
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# CONFIG_TEST_HMM is not set
# CONFIG_TEST_FREE_PAGES is not set
add aarch64 support
2020-11-26 21:09:27 +00:00
CONFIG_MEMTEST=y
Update configs Update existing x86 configs manually Make an arm64 config based on them instead on the old one which was temporary copypasted from ALT Linux In most cases I answered to `make ARCH=xxx defconfig` like this: N/y -> Y N/m(/y) -> M Y/n(/m) -> Y M/n(/y) -> M But did not enable odd debug. Probably too much hardware is enabled on arm64.
2020-12-22 00:21:19 +03:00
# end of Kernel Testing and Coverage
add aarch64 support
2020-11-26 21:09:27 +00:00
# end of Kernel hacking
Reference in a new issue Copy permalink