mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-17 18:14:24 +00:00
82 lines
2.5 KiB
ReStructuredText
82 lines
2.5 KiB
ReStructuredText
Trusted Firmware-A for STM32MP1
|
|
===============================
|
|
|
|
STM32MP1 is a microprocessor designed by STMicroelectronics
|
|
based on a dual Arm Cortex-A7.
|
|
It is an Armv7-A platform, using dedicated code from TF-A.
|
|
|
|
|
|
Design
|
|
------
|
|
The STM32MP1 resets in the ROM code of the Cortex-A7.
|
|
The primary boot core (core 0) executes the boot sequence while
|
|
secondary boot core (core 1) is kept in a holding pen loop.
|
|
The ROM code boot sequence loads the TF-A binary image from boot device
|
|
to embedded SRAM.
|
|
|
|
The TF-A image must be properly formatted with a STM32 header structure
|
|
for ROM code is able to load this image.
|
|
Tool stm32image can be used to prepend this header to the generated TF-A binary.
|
|
|
|
At compilation step, BL2, BL32 and DTB file are linked together in a single
|
|
binary. The stm32image tool is also generated and the header is added to TF-A
|
|
binary. This binary file with header is named tf-a-stm32mp157c-ev1.stm32.
|
|
It can then be copied in the first partition of the boot device.
|
|
|
|
|
|
Memory mapping
|
|
~~~~~~~~~~~~~~
|
|
|
|
::
|
|
|
|
0x00000000 +-----------------+
|
|
| | ROM
|
|
0x00020000 +-----------------+
|
|
| |
|
|
| ... |
|
|
| |
|
|
0x2FFC0000 +-----------------+ \
|
|
| | |
|
|
| ... | |
|
|
| | |
|
|
0x2FFD8000 +-----------------+ |
|
|
| TF-A DTB | | Embedded SRAM
|
|
0x2FFDC000 +-----------------+ |
|
|
| BL2 | |
|
|
0x2FFEF000 +-----------------+ |
|
|
| BL32 | |
|
|
0x30000000 +-----------------+ /
|
|
| |
|
|
| ... |
|
|
| |
|
|
0x40000000 +-----------------+
|
|
| |
|
|
| | Devices
|
|
| |
|
|
0xC0000000 +-----------------+ \
|
|
| | |
|
|
0xC0100000 +-----------------+ |
|
|
| BL33 | | Non-secure RAM (DDR)
|
|
| ... | |
|
|
| | |
|
|
0xFFFFFFFF +-----------------+ /
|
|
|
|
|
|
Boot sequence
|
|
~~~~~~~~~~~~~
|
|
|
|
ROM code -> BL2 (compiled with BL2_AT_EL3) -> BL32 (SP_min) -> BL33 (U-Boot)
|
|
|
|
|
|
Build Instructions
|
|
------------------
|
|
|
|
To build:
|
|
|
|
.. code:: bash
|
|
|
|
make CROSS_COMPILE=arm-linux-gnueabihf- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 AARCH32_SP=sp_min
|
|
|
|
The following build options are supported:
|
|
|
|
- ``ENABLE_STACK_PROTECTOR``: To enable the stack protection.
|