mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-29 16:48:59 +00:00
eb975f52ea
There used to be 2 warm reset entry points: - the "on finisher", for when the core has been turned on using a PSCI CPU_ON call; - the "suspend finisher", entered upon resumption from a previous PSCI CPU_SUSPEND call. The appropriate warm reset entry point used to be programmed into the mailboxes by the power management hooks. However, it is not required to provide this information to the PSCI entry point code, as it can figure it out by itself. By querying affinity info state, a core is able to determine on which execution path it is. If the state is ON_PENDING then it means it's been turned on else it is resuming from suspend. This patch unifies the 2 warm reset entry points into a single one: psci_entrypoint(). The patch also implements the necessary logic to distinguish between the 2 types of warm resets in the power up finisher. The plat_setup_psci_ops() API now takes the secure entry point as an additional parameter to enable the platforms to configure their mailbox. The platform hooks `pwr_domain_on` and `pwr_domain_suspend` no longer take secure entry point as a parameter. Change-Id: I7d1c93787b54213aefdbc046b8cd66a555dfbfd9
211 lines
9 KiB
C
211 lines
9 KiB
C
/*
|
|
* Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* Neither the name of ARM nor the names of its contributors may be used
|
|
* to endorse or promote products derived from this software without specific
|
|
* prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef __PLATFORM_H__
|
|
#define __PLATFORM_H__
|
|
|
|
#include <stdint.h>
|
|
#include <psci.h>
|
|
|
|
/*******************************************************************************
|
|
* Forward declarations
|
|
******************************************************************************/
|
|
struct meminfo;
|
|
struct image_info;
|
|
struct entry_point_info;
|
|
struct bl31_params;
|
|
|
|
/*******************************************************************************
|
|
* plat_get_rotpk_info() flags
|
|
******************************************************************************/
|
|
#define ROTPK_IS_HASH (1 << 0)
|
|
|
|
/*******************************************************************************
|
|
* Function declarations
|
|
******************************************************************************/
|
|
/*******************************************************************************
|
|
* Mandatory common functions
|
|
******************************************************************************/
|
|
uint64_t plat_get_syscnt_freq(void);
|
|
int plat_get_image_source(unsigned int image_id,
|
|
uintptr_t *dev_handle,
|
|
uintptr_t *image_spec);
|
|
unsigned long plat_get_ns_image_entrypoint(void);
|
|
unsigned int plat_my_core_pos(void);
|
|
int plat_core_pos_by_mpidr(unsigned long mpidr);
|
|
|
|
/*******************************************************************************
|
|
* Mandatory interrupt management functions
|
|
******************************************************************************/
|
|
uint32_t plat_ic_get_pending_interrupt_id(void);
|
|
uint32_t plat_ic_get_pending_interrupt_type(void);
|
|
uint32_t plat_ic_acknowledge_interrupt(void);
|
|
uint32_t plat_ic_get_interrupt_type(uint32_t id);
|
|
void plat_ic_end_of_interrupt(uint32_t id);
|
|
uint32_t plat_interrupt_type_to_line(uint32_t type,
|
|
uint32_t security_state);
|
|
|
|
/*******************************************************************************
|
|
* Optional common functions (may be overridden)
|
|
******************************************************************************/
|
|
unsigned long plat_get_my_stack(void);
|
|
void plat_report_exception(unsigned long);
|
|
int plat_crash_console_init(void);
|
|
int plat_crash_console_putc(int c);
|
|
|
|
/*******************************************************************************
|
|
* Mandatory BL1 functions
|
|
******************************************************************************/
|
|
void bl1_early_platform_setup(void);
|
|
void bl1_plat_arch_setup(void);
|
|
void bl1_platform_setup(void);
|
|
struct meminfo *bl1_plat_sec_mem_layout(void);
|
|
|
|
/*
|
|
* This function allows the platform to change the entrypoint information for
|
|
* BL2, after BL1 has loaded BL2 into memory but before BL2 is executed.
|
|
*/
|
|
void bl1_plat_set_bl2_ep_info(struct image_info *image,
|
|
struct entry_point_info *ep);
|
|
|
|
/*******************************************************************************
|
|
* Optional BL1 functions (may be overridden)
|
|
******************************************************************************/
|
|
void bl1_init_bl2_mem_layout(const struct meminfo *bl1_mem_layout,
|
|
struct meminfo *bl2_mem_layout);
|
|
|
|
/*******************************************************************************
|
|
* Mandatory BL2 functions
|
|
******************************************************************************/
|
|
void bl2_early_platform_setup(struct meminfo *mem_layout);
|
|
void bl2_plat_arch_setup(void);
|
|
void bl2_platform_setup(void);
|
|
struct meminfo *bl2_plat_sec_mem_layout(void);
|
|
|
|
/*
|
|
* This function returns a pointer to the shared memory that the platform has
|
|
* kept aside to pass trusted firmware related information that BL3-1
|
|
* could need
|
|
*/
|
|
struct bl31_params *bl2_plat_get_bl31_params(void);
|
|
|
|
/*
|
|
* This function returns a pointer to the shared memory that the platform
|
|
* has kept to point to entry point information of BL31 to BL2
|
|
*/
|
|
struct entry_point_info *bl2_plat_get_bl31_ep_info(void);
|
|
|
|
/*
|
|
* This function flushes to main memory all the params that are
|
|
* passed to BL3-1
|
|
*/
|
|
void bl2_plat_flush_bl31_params(void);
|
|
|
|
/*
|
|
* The next 2 functions allow the platform to change the entrypoint information
|
|
* for the mandatory 3rd level BL images, BL3-1 and BL3-3. This is done after
|
|
* BL2 has loaded those images into memory but before BL3-1 is executed.
|
|
*/
|
|
void bl2_plat_set_bl31_ep_info(struct image_info *image,
|
|
struct entry_point_info *ep);
|
|
|
|
void bl2_plat_set_bl33_ep_info(struct image_info *image,
|
|
struct entry_point_info *ep);
|
|
|
|
/* Gets the memory layout for BL3-3 */
|
|
void bl2_plat_get_bl33_meminfo(struct meminfo *mem_info);
|
|
|
|
/*******************************************************************************
|
|
* Conditionally mandatory BL2 functions: must be implemented if BL3-0 image
|
|
* is supported
|
|
******************************************************************************/
|
|
/* Gets the memory layout for BL3-0 */
|
|
void bl2_plat_get_bl30_meminfo(struct meminfo *mem_info);
|
|
|
|
/*
|
|
* This function is called after loading BL3-0 image and it is used to perform
|
|
* any platform-specific actions required to handle the SCP firmware.
|
|
*/
|
|
int bl2_plat_handle_bl30(struct image_info *bl30_image_info);
|
|
|
|
/*******************************************************************************
|
|
* Conditionally mandatory BL2 functions: must be implemented if BL3-2 image
|
|
* is supported
|
|
******************************************************************************/
|
|
void bl2_plat_set_bl32_ep_info(struct image_info *image,
|
|
struct entry_point_info *ep);
|
|
|
|
/* Gets the memory layout for BL3-2 */
|
|
void bl2_plat_get_bl32_meminfo(struct meminfo *mem_info);
|
|
|
|
/*******************************************************************************
|
|
* Optional BL2 functions (may be overridden)
|
|
******************************************************************************/
|
|
|
|
/*******************************************************************************
|
|
* Mandatory BL3-1 functions
|
|
******************************************************************************/
|
|
void bl31_early_platform_setup(struct bl31_params *from_bl2,
|
|
void *plat_params_from_bl2);
|
|
void bl31_plat_arch_setup(void);
|
|
void bl31_platform_setup(void);
|
|
struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type);
|
|
|
|
/*******************************************************************************
|
|
* Mandatory PSCI functions (BL3-1)
|
|
******************************************************************************/
|
|
int plat_setup_psci_ops(uintptr_t sec_entrypoint,
|
|
const struct plat_psci_ops **);
|
|
const unsigned char *plat_get_power_domain_tree_desc(void);
|
|
|
|
/*******************************************************************************
|
|
* Optional PSCI functions (BL3-1).
|
|
******************************************************************************/
|
|
plat_local_state_t plat_get_target_pwr_state(unsigned int lvl,
|
|
const plat_local_state_t *states,
|
|
unsigned int ncpu);
|
|
|
|
/*******************************************************************************
|
|
* Optional BL3-1 functions (may be overridden)
|
|
******************************************************************************/
|
|
void bl31_plat_enable_mmu(uint32_t flags);
|
|
|
|
/*******************************************************************************
|
|
* Optional BL3-2 functions (may be overridden)
|
|
******************************************************************************/
|
|
void bl32_plat_enable_mmu(uint32_t flags);
|
|
|
|
/*******************************************************************************
|
|
* Trusted Board Boot functions
|
|
******************************************************************************/
|
|
int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
|
|
unsigned int *flags);
|
|
|
|
#endif /* __PLATFORM_H__ */
|