mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-20 19:44:23 +00:00
742ca2307f
This change makes AMU auxiliary counters configurable on a per-core
basis, controlled by `ENABLE_AMU_AUXILIARY_COUNTERS`.
Auxiliary counters can be described via the `HW_CONFIG` device tree if
the `ENABLE_AMU_FCONF` build option is enabled, or the platform must
otherwise implement the `plat_amu_topology` function.
A new phandle property for `cpu` nodes (`amu`) has been introduced to
the `HW_CONFIG` specification to allow CPUs to describe the view of
their own AMU:
```
cpu0: cpu@0 {
...
amu = <&cpu0_amu>;
};
```
Multiple cores may share an `amu` handle if they implement the
same set of auxiliary counters.
AMU counters are described for one or more AMUs through the use of a new
`amus` node:
```
amus {
cpu0_amu: amu-0 {
#address-cells = <1>;
#size-cells = <0>;
counter@0 {
reg = <0>;
enable-at-el3;
};
counter@n {
reg = <n>;
...
};
};
};
```
This structure describes the **auxiliary** (group 1) AMU counters.
Architected counters have architecturally-defined behaviour, and as
such do not require DTB entries.
These `counter` nodes support two properties:
- The `reg` property represents the counter register index.
- The presence of the `enable-at-el3` property determines whether
the firmware should enable the counter prior to exiting EL3.
Change-Id: Ie43aee010518c5725a3b338a4899b0857caf4c28
Signed-off-by: Chris Kay <chris.kay@arm.com>
|
||
|---|---|---|
| .. | ||
| amu.h | ||
| mpam.h | ||
| pauth.h | ||
| ras.h | ||
| ras_arch.h | ||
| spe.h | ||
| sve.h | ||
| sys_reg_trace.h | ||
| trbe.h | ||
| trf.h | ||
| twed.h | ||