mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-17 01:54:22 +00:00
326694760f
NXP tool to create pbl from bl2 binary: - RCW is prepended to BL2.bin - If TRUSTED_BOARD_BOOT=1, pre-append the CSF header to be understood by NXP boot-rom. Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com> Change-Id: Iddc7336a045222e2073ddad86358ebc4440b8bcf
65 lines
2.4 KiB
Text
65 lines
2.4 KiB
Text
Description:
|
|
------------
|
|
Tool 'create_pbl' is a standalone tool to create the PBL images.
|
|
where,
|
|
On the basis of Chassis,
|
|
RCW image is placed first followed by the,
|
|
PBI commands to copy the,
|
|
Input BL2 image stored on the,
|
|
Specified boot source (QSPI or SD or NOR) to the,
|
|
Specified destination address.
|
|
|
|
|
|
Usage in standalone way:
|
|
-----------------------
|
|
|
|
./create_pbl [options] (mentioned below):
|
|
|
|
-r <RCW file-name> - name of RCW binary file.
|
|
-i <BL2 Bin file-name> - file to be added to rcw file.
|
|
-c <SoC Number> - SoC numeric identifier, may be one of
|
|
1012,1023,1026.1028,
|
|
1043,1046,1088,2080,
|
|
2088,2160
|
|
-b <boot source id> - Boot source id string, may be one of
|
|
"qspi", "nor", "nand", "sd", "emmc"
|
|
-d <Address> - Destination address where BL2
|
|
image is to be copied
|
|
-o <output filename> - Name of PBL image generated
|
|
as an output of the tool.
|
|
-e <Address> - [Optional] Entry Point Address
|
|
of the BL2.bin
|
|
-f <Address> - BL2 image offset
|
|
on Boot Source for block copy.
|
|
command for chassis >=3.)
|
|
(Must for Ch3, Ignored for Ch2)
|
|
-h Help.
|
|
-s Secure boot.
|
|
|
|
-s secure boot
|
|
-c SoC Number (see description above)
|
|
-b Boot source.
|
|
-r RCW binary file.
|
|
-i Input file that is to be added to rcw file.
|
|
-o Name of output file
|
|
-f Source Offset (Block Copy)
|
|
-d Destination address to which file has to be copied
|
|
-h Help.
|
|
|
|
Example:
|
|
./create_pbl -r <RCW file> -i <bl2.bin> -c <chassis_no> -b <boot_source = sd/qspi/nor> -d <Destination_Addr> -o <pbl_image_name>
|
|
|
|
|
|
|
|
Usage at compilation time:
|
|
--------------------------------
|
|
|
|
make <compilation command......> pbl RCW=<Path_to_RCW_File>/<rcw_file_name.bin>
|
|
|
|
Example: QSPI Boot For LS1046ARDB-
|
|
|
|
make PLAT=ls1046rdb all fip BOOT_MODE=qspi SPD=opteed BL32=tee.bin BL33=u-boot-ls1046.bin pbl RCW=/home/pankaj/flexbuild/packages/firmware/dash-rcw/ls1046ardb/RR_FFSSPPPN_1133_5506/rcw_1600_qspiboot.bin
|
|
|
|
Example: QSPI Boot For LX2160ARDB-
|
|
|
|
make PLAT=lx2160ardb all fip BOOT_MODE=flexspi_nor SPD=opteed BL32=tee_lx2.bin BL33=u-boot_lx2160.bin pbl RCW=plat/nxp/soc-lx2160/lx2160ardb/rcw_1900_600_1600_19_5_2.bin
|