Djam/arm-trusted-firmware
1
0
Fork 0
mirror of https://github.com/ARM-software/arm-trusted-firmware.git synced 2025-04-16 17:44:19 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
arm-trusted-firmware/plat/st/stm32mp1/platform.mk
Lionel Debieve beb625f90b feat(stm32mp1): add the TRUSTED_BOARD_BOOT support 
Add the support of the TRUSTED_BOARD_BOOT to authenticate the loaded
FIP using platform CoT management.
It adds TBB platform definition, redefining the standard image ID in
order to decrease requested size in BL2 binary.
Authentication will use mbedTLS library for parsing certificate
configured with a platform configuration.

Change-Id: I9da66b915c5e9e9293fccfce92bef2434da1e430
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
2022-11-14 11:25:01 +01:00

588 lines
17 KiB
Makefile
Raw Blame History

#
# Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
ARM_CORTEX_A7 := yes
ARM_WITH_NEON := yes
BL2_AT_EL3 := 1
USE_COHERENT_MEM := 0
STM32MP_EARLY_CONSOLE ?= 0
STM32MP_RECONFIGURE_CONSOLE ?= 0
STM32MP_UART_BAUDRATE ?= 115200
# Allow TF-A to concatenate BL2 & BL32 binaries in a single file,
# share DTB file between BL2 and BL32
# If it is set to 0, then FIP is used
STM32MP_USE_STM32IMAGE ?= 0
TRUSTED_BOARD_BOOT ?= 0
STM32MP_USE_EXTERNAL_HEAP ?= 0
# Use secure library from the ROM code for authentication
STM32MP_CRYPTO_ROM_LIB ?= 0
# Please don't increment this value without good understanding of
# the monotonic counter
STM32_TF_VERSION ?= 0
# Enable dynamic memory mapping
PLAT_XLAT_TABLES_DYNAMIC := 1
# Default Device tree
DTB_FILE_NAME ?= stm32mp157c-ev1.dtb
STM32MP13 ?= 0
STM32MP15 ?= 0
ifeq ($(STM32MP13),1)
ifeq ($(STM32MP15),1)
$(error Cannot enable both flags STM32MP13 and STM32MP15)
endif
STM32MP13 := 1
STM32MP15 := 0
else ifeq ($(STM32MP15),1)
STM32MP13 := 0
STM32MP15 := 1
else ifneq ($(findstring stm32mp13,$(DTB_FILE_NAME)),)
STM32MP13 := 1
STM32MP15 := 0
else ifneq ($(findstring stm32mp15,$(DTB_FILE_NAME)),)
STM32MP13 := 0
STM32MP15 := 1
endif
ifeq ($(STM32MP13),1)
# Will use SRAM2 as mbedtls heap
STM32MP_USE_EXTERNAL_HEAP := 1
# DDR controller with single AXI port and 16-bit interface
STM32MP_DDR_DUAL_AXI_PORT:= 0
STM32MP_DDR_32BIT_INTERFACE:= 0
ifeq (${TRUSTED_BOARD_BOOT},1)
# PKA algo to include
PKA_USE_NIST_P256 := 1
PKA_USE_BRAINPOOL_P256T1:= 1
endif
# STM32 image header version v2.0
STM32_HEADER_VERSION_MAJOR:= 2
STM32_HEADER_VERSION_MINOR:= 0
endif
ifeq ($(STM32MP15),1)
# DDR controller with dual AXI port and 32-bit interface
STM32MP_DDR_DUAL_AXI_PORT:= 1
STM32MP_DDR_32BIT_INTERFACE:= 1
# STM32 image header version v1.0
STM32_HEADER_VERSION_MAJOR:= 1
STM32_HEADER_VERSION_MINOR:= 0
# Add OP-TEE reserved shared memory area in mapping
STM32MP15_OPTEE_RSV_SHM := 1
$(eval $(call add_defines,STM32MP15_OPTEE_RSV_SHM))
STM32MP_CRYPTO_ROM_LIB := 1
endif
# STM32 image header binary type for BL2
STM32_HEADER_BL2_BINARY_TYPE:= 0x10
ifeq ($(AARCH32_SP),sp_min)
# Disable Neon support: sp_min runtime may conflict with non-secure world
TF_CFLAGS += -mfloat-abi=soft
endif
TF_CFLAGS += -Wsign-compare
TF_CFLAGS += -Wformat-signedness
# Not needed for Cortex-A7
WORKAROUND_CVE_2017_5715:= 0
WORKAROUND_CVE_2022_23960:= 0
# Number of TF-A copies in the device
STM32_TF_A_COPIES := 2
# PLAT_PARTITION_MAX_ENTRIES must take care of STM32_TF-A_COPIES and other partitions
# such as metadata (2) to find all the FIP partitions (default is 2).
PLAT_PARTITION_MAX_ENTRIES := $(shell echo $$(($(STM32_TF_A_COPIES) + 4)))
ifeq (${PSA_FWU_SUPPORT},1)
ifneq (${STM32MP_USE_STM32IMAGE},1)
# Number of banks of updatable firmware
NR_OF_FW_BANKS := 2
NR_OF_IMAGES_IN_FW_BANK := 1
FWU_MAX_PART = $(shell echo $$(($(STM32_TF_A_COPIES) + 2 + $(NR_OF_FW_BANKS))))
ifeq ($(shell test $(FWU_MAX_PART) -gt $(PLAT_PARTITION_MAX_ENTRIES); echo $$?),0)
$(error "Required partition number is $(FWU_MAX_PART) where PLAT_PARTITION_MAX_ENTRIES is only \
$(PLAT_PARTITION_MAX_ENTRIES)")
endif
else
$(error FWU Feature enabled only with FIP images)
endif
endif
ifeq ($(STM32MP13),1)
STM32_HASH_VER := 4
STM32_RNG_VER := 4
else # Assuming STM32MP15
STM32_HASH_VER := 2
STM32_RNG_VER := 2
endif
# Boot devices
STM32MP_EMMC ?= 0
STM32MP_SDMMC ?= 0
STM32MP_RAW_NAND ?= 0
STM32MP_SPI_NAND ?= 0
STM32MP_SPI_NOR ?= 0
STM32MP_EMMC_BOOT ?= 0
# Serial boot devices
STM32MP_USB_PROGRAMMER ?= 0
STM32MP_UART_PROGRAMMER ?= 0
# Download load address for serial boot devices
DWL_BUFFER_BASE ?= 0xC7000000
# Device tree
ifeq ($(STM32MP13),1)
BL2_DTSI := stm32mp13-bl2.dtsi
FDT_SOURCES := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl2.dts,$(DTB_FILE_NAME)))
else
ifeq ($(STM32MP_USE_STM32IMAGE),1)
ifeq ($(AARCH32_SP),optee)
BL2_DTSI := stm32mp15-bl2.dtsi
FDT_SOURCES := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl2.dts,$(DTB_FILE_NAME)))
else
FDT_SOURCES := $(addprefix fdts/, $(patsubst %.dtb,%.dts,$(DTB_FILE_NAME)))
endif
else
BL2_DTSI := stm32mp15-bl2.dtsi
FDT_SOURCES := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl2.dts,$(DTB_FILE_NAME)))
ifeq ($(AARCH32_SP),sp_min)
BL32_DTSI := stm32mp15-bl32.dtsi
FDT_SOURCES += $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl32.dts,$(DTB_FILE_NAME)))
endif
endif
endif
$(eval DTC_V = $(shell $(DTC) -v | awk '{print $$NF}'))
$(eval DTC_VERSION = $(shell printf "%d" $(shell echo ${DTC_V} | cut -d- -f1 | sed "s/\./0/g" | grep -o "[0-9]*")))
DTC_CPPFLAGS += ${INCLUDES}
DTC_FLAGS += -Wno-unit_address_vs_reg
ifeq ($(shell test $(DTC_VERSION) -ge 10601; echo $$?),0)
DTC_FLAGS += -Wno-interrupt_provider
endif
# Macros and rules to build TF binary
STM32_TF_ELF_LDFLAGS := --hash-style=gnu --as-needed
STM32_TF_STM32 := $(addprefix ${BUILD_PLAT}/tf-a-, $(patsubst %.dtb,%.stm32,$(DTB_FILE_NAME)))
STM32_TF_LINKERFILE := ${BUILD_PLAT}/stm32mp1.ld
ASFLAGS += -DBL2_BIN_PATH=\"${BUILD_PLAT}/bl2.bin\"
ifeq ($(AARCH32_SP),sp_min)
# BL32 is built only if using SP_MIN
BL32_DEP := bl32
ASFLAGS += -DBL32_BIN_PATH=\"${BUILD_PLAT}/bl32.bin\"
endif
# Variables for use with stm32image
STM32IMAGEPATH ?= tools/stm32image
STM32IMAGE ?= ${STM32IMAGEPATH}/stm32image${BIN_EXT}
STM32IMAGE_SRC := ${STM32IMAGEPATH}/stm32image.c
ifneq (${STM32MP_USE_STM32IMAGE},1)
FIP_DEPS += dtbs
STM32MP_HW_CONFIG := ${BL33_CFG}
STM32MP_FW_CONFIG_NAME := $(patsubst %.dtb,%-fw-config.dtb,$(DTB_FILE_NAME))
STM32MP_FW_CONFIG := ${BUILD_PLAT}/fdts/$(STM32MP_FW_CONFIG_NAME)
ifneq (${AARCH32_SP},none)
FDT_SOURCES += $(addprefix fdts/, $(patsubst %.dtb,%.dts,$(STM32MP_FW_CONFIG_NAME)))
endif
# Add the FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_FW_CONFIG},--fw-config))
# Add the HW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_HW_CONFIG},--hw-config))
ifeq ($(GENERATE_COT),1)
STM32MP_CFG_CERT := $(BUILD_PLAT)/stm32mp_cfg_cert.crt
# Add the STM32MP_CFG_CERT to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_CFG_CERT},--stm32mp-cfg-cert))
endif
ifeq ($(AARCH32_SP),sp_min)
STM32MP_TOS_FW_CONFIG := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl32.dtb,$(DTB_FILE_NAME)))
$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_TOS_FW_CONFIG},--tos-fw-config))
else
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
# in the FIP if the platform requires.
ifneq ($(BL32_EXTRA1),)
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
endif
ifneq ($(BL32_EXTRA2),)
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
endif
endif
endif
# Enable flags for C files
$(eval $(call assert_booleans,\
$(sort \
PKA_USE_BRAINPOOL_P256T1 \
PKA_USE_NIST_P256 \
PLAT_TBBR_IMG_DEF \
PLAT_XLAT_TABLES_DYNAMIC \
STM32MP_CRYPTO_ROM_LIB \
STM32MP_DDR_32BIT_INTERFACE \
STM32MP_DDR_DUAL_AXI_PORT \
STM32MP_EARLY_CONSOLE \
STM32MP_EMMC \
STM32MP_EMMC_BOOT \
STM32MP_RAW_NAND \
STM32MP_RECONFIGURE_CONSOLE \
STM32MP_SDMMC \
STM32MP_SPI_NAND \
STM32MP_SPI_NOR \
STM32MP_UART_PROGRAMMER \
STM32MP_USB_PROGRAMMER \
STM32MP_USE_EXTERNAL_HEAP \
STM32MP_USE_STM32IMAGE \
STM32MP13 \
STM32MP15 \
)))
$(eval $(call assert_numerics,\
$(sort \
PLAT_PARTITION_MAX_ENTRIES \
STM32_HASH_VER \
STM32_HEADER_VERSION_MAJOR \
STM32_RNG_VER \
STM32_TF_A_COPIES \
STM32_TF_VERSION \
STM32MP_UART_BAUDRATE \
)))
$(eval $(call add_defines,\
$(sort \
DWL_BUFFER_BASE \
PKA_USE_BRAINPOOL_P256T1 \
PKA_USE_NIST_P256 \
PLAT_PARTITION_MAX_ENTRIES \
PLAT_TBBR_IMG_DEF \
PLAT_XLAT_TABLES_DYNAMIC \
STM32_HASH_VER \
STM32_HEADER_VERSION_MAJOR \
STM32_RNG_VER \
STM32_TF_A_COPIES \
STM32_TF_VERSION \
STM32MP_CRYPTO_ROM_LIB \
STM32MP_DDR_32BIT_INTERFACE \
STM32MP_DDR_DUAL_AXI_PORT \
STM32MP_EARLY_CONSOLE \
STM32MP_EMMC \
STM32MP_EMMC_BOOT \
STM32MP_RAW_NAND \
STM32MP_RECONFIGURE_CONSOLE \
STM32MP_SDMMC \
STM32MP_SPI_NAND \
STM32MP_SPI_NOR \
STM32MP_UART_BAUDRATE \
STM32MP_UART_PROGRAMMER \
STM32MP_USB_PROGRAMMER \
STM32MP_USE_EXTERNAL_HEAP \
STM32MP_USE_STM32IMAGE \
STM32MP13 \
STM32MP15 \
)))
# Include paths and source files
PLAT_INCLUDES := -Iplat/st/common/include/
PLAT_INCLUDES += -Iplat/st/stm32mp1/include/
ifeq (${STM32MP_USE_STM32IMAGE},1)
include common/fdt_wrappers.mk
else
include lib/fconf/fconf.mk
endif
include lib/libfdt/libfdt.mk
PLAT_BL_COMMON_SOURCES := common/uuid.c \
plat/st/common/stm32mp_common.c \
plat/st/stm32mp1/stm32mp1_private.c
PLAT_BL_COMMON_SOURCES += drivers/st/uart/aarch32/stm32_console.S
ifneq (${ENABLE_STACK_PROTECTOR},0)
PLAT_BL_COMMON_SOURCES += plat/st/stm32mp1/stm32mp1_stack_protector.c
endif
include lib/xlat_tables_v2/xlat_tables.mk
PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
PLAT_BL_COMMON_SOURCES += lib/cpus/aarch32/cortex_a7.S
PLAT_BL_COMMON_SOURCES += drivers/arm/tzc/tzc400.c \
drivers/clk/clk.c \
drivers/delay_timer/delay_timer.c \
drivers/delay_timer/generic_delay_timer.c \
drivers/st/bsec/bsec2.c \
drivers/st/clk/stm32mp_clkfunc.c \
drivers/st/ddr/stm32mp_ddr.c \
drivers/st/ddr/stm32mp1_ddr_helpers.c \
drivers/st/gpio/stm32_gpio.c \
drivers/st/i2c/stm32_i2c.c \
drivers/st/iwdg/stm32_iwdg.c \
drivers/st/pmic/stm32mp_pmic.c \
drivers/st/pmic/stpmic1.c \
drivers/st/regulator/regulator_core.c \
drivers/st/regulator/regulator_fixed.c \
drivers/st/reset/stm32mp1_reset.c \
plat/st/common/stm32mp_dt.c \
plat/st/stm32mp1/stm32mp1_dbgmcu.c \
plat/st/stm32mp1/stm32mp1_helper.S \
plat/st/stm32mp1/stm32mp1_syscfg.c
ifeq ($(STM32MP13),1)
PLAT_BL_COMMON_SOURCES += drivers/st/clk/clk-stm32-core.c \
drivers/st/clk/clk-stm32mp13.c \
drivers/st/crypto/stm32_rng.c
else
PLAT_BL_COMMON_SOURCES += drivers/st/clk/stm32mp1_clk.c
endif
ifneq (${STM32MP_USE_STM32IMAGE},1)
BL2_SOURCES += ${FCONF_SOURCES} ${FCONF_DYN_SOURCES}
BL2_SOURCES += drivers/io/io_fip.c \
plat/st/common/bl2_io_storage.c \
plat/st/common/stm32mp_fconf_io.c \
plat/st/stm32mp1/plat_bl2_mem_params_desc.c \
plat/st/stm32mp1/stm32mp1_fconf_firewall.c
else
BL2_SOURCES += ${FDT_WRAPPERS_SOURCES}
BL2_SOURCES += drivers/io/io_dummy.c \
drivers/st/io/io_stm32image.c \
plat/st/common/bl2_stm32_io_storage.c \
plat/st/stm32mp1/plat_bl2_stm32_mem_params_desc.c \
plat/st/stm32mp1/stm32mp1_security.c
endif
include lib/zlib/zlib.mk
ifeq (${PSA_FWU_SUPPORT},1)
include drivers/fwu/fwu.mk
endif
BL2_SOURCES += $(ZLIB_SOURCES)
BL2_SOURCES += drivers/io/io_block.c \
drivers/io/io_mtd.c \
drivers/io/io_storage.c \
drivers/st/crypto/stm32_hash.c \
plat/st/stm32mp1/bl2_plat_setup.c
ifeq (${TRUSTED_BOARD_BOOT},1)
AUTH_SOURCES := drivers/auth/auth_mod.c \
drivers/auth/crypto_mod.c \
drivers/auth/img_parser_mod.c
ifeq (${GENERATE_COT},1)
TFW_NVCTR_VAL := 0
NTFW_NVCTR_VAL := 0
KEY_SIZE :=
KEY_ALG := ecdsa
HASH_ALG := sha256
ifeq (${SAVE_KEYS},1)
TRUSTED_WORLD_KEY ?= ${BUILD_PLAT}/trusted.pem
NON_TRUSTED_WORLD_KEY ?= ${BUILD_PLAT}/non-trusted.pem
BL32_KEY ?= ${BUILD_PLAT}/trusted_os.pem
BL33_KEY ?= ${BUILD_PLAT}/non-trusted_os.pem
endif
endif
TF_MBEDTLS_KEY_ALG := ecdsa
MBEDTLS_CONFIG_FILE ?= "<stm32mp1_mbedtls_config.h>"
include drivers/auth/mbedtls/mbedtls_x509.mk
COT_DESC_IN_DTB := 1
AUTH_SOURCES += lib/fconf/fconf_cot_getter.c \
lib/fconf/fconf_tbbr_getter.c \
plat/st/common/stm32mp_crypto_lib.c
ifeq ($(STM32MP13),1)
AUTH_SOURCES += drivers/st/crypto/stm32_pka.c
AUTH_SOURCES += drivers/st/crypto/stm32_saes.c
endif
BL2_SOURCES += $(AUTH_SOURCES) \
plat/st/common/stm32mp_trusted_boot.c
endif
ifneq ($(filter 1,${STM32MP_EMMC} ${STM32MP_SDMMC}),)
BL2_SOURCES += drivers/mmc/mmc.c \
drivers/partition/gpt.c \
drivers/partition/partition.c \
drivers/st/io/io_mmc.c \
drivers/st/mmc/stm32_sdmmc2.c
endif
ifeq (${STM32MP_RAW_NAND},1)
$(eval $(call add_define_val,NAND_ONFI_DETECT,1))
BL2_SOURCES += drivers/mtd/nand/raw_nand.c \
drivers/st/fmc/stm32_fmc2_nand.c
endif
ifeq (${STM32MP_SPI_NAND},1)
BL2_SOURCES += drivers/mtd/nand/spi_nand.c
endif
ifeq (${STM32MP_SPI_NOR},1)
ifneq (${STM32MP_FORCE_MTD_START_OFFSET},)
$(eval $(call add_define_val,STM32MP_NOR_FIP_OFFSET,${STM32MP_FORCE_MTD_START_OFFSET}))
endif
BL2_SOURCES += drivers/mtd/nor/spi_nor.c
endif
ifneq ($(filter 1,${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
BL2_SOURCES += drivers/mtd/spi-mem/spi_mem.c \
drivers/st/spi/stm32_qspi.c
endif
ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND}),)
ifneq (${STM32MP_FORCE_MTD_START_OFFSET},)
$(eval $(call add_define_val,STM32MP_NAND_FIP_OFFSET,${STM32MP_FORCE_MTD_START_OFFSET}))
endif
BL2_SOURCES += drivers/mtd/nand/core.c
endif
ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
BL2_SOURCES += plat/st/stm32mp1/stm32mp1_boot_device.c
endif
ifneq ($(filter 1,${STM32MP_UART_PROGRAMMER} ${STM32MP_USB_PROGRAMMER}),)
BL2_SOURCES += drivers/io/io_memmap.c
endif
ifeq (${STM32MP_UART_PROGRAMMER},1)
BL2_SOURCES += drivers/st/uart/stm32_uart.c \
plat/st/common/stm32cubeprogrammer_uart.c
endif
ifeq (${STM32MP_USB_PROGRAMMER},1)
#The DFU stack uses only one end point, reduce the USB stack footprint
$(eval $(call add_define_val,CONFIG_USBD_EP_NB,1U))
BL2_SOURCES += drivers/st/usb/stm32mp1_usb.c \
drivers/usb/usb_device.c \
plat/st/common/stm32cubeprogrammer_usb.c \
plat/st/common/usb_dfu.c \
plat/st/stm32mp1/stm32mp1_usb_dfu.c
endif
BL2_SOURCES += drivers/st/ddr/stm32mp_ddr_test.c \
drivers/st/ddr/stm32mp_ram.c \
drivers/st/ddr/stm32mp1_ddr.c \
drivers/st/ddr/stm32mp1_ram.c
BL2_SOURCES += common/desc_image_load.c \
plat/st/stm32mp1/plat_image_load.c
BL2_SOURCES += lib/optee/optee_utils.c
# Compilation rules
.PHONY: check_dtc_version stm32image clean_stm32image check_boot_device
.SUFFIXES:
all: check_dtc_version stm32image ${STM32_TF_STM32}
distclean realclean clean: clean_stm32image
bl2: check_boot_device
check_boot_device:
@if [ ${STM32MP_EMMC} != 1 ] && \
[ ${STM32MP_SDMMC} != 1 ] && \
[ ${STM32MP_RAW_NAND} != 1 ] && \
[ ${STM32MP_SPI_NAND} != 1 ] && \
[ ${STM32MP_SPI_NOR} != 1 ] && \
[ ${STM32MP_UART_PROGRAMMER} != 1 ] && \
[ ${STM32MP_USB_PROGRAMMER} != 1 ]; then \
echo "No boot device driver is enabled"; \
false; \
fi
stm32image: ${STM32IMAGE}
${STM32IMAGE}: ${STM32IMAGE_SRC}
${Q}${MAKE} CPPFLAGS="" --no-print-directory -C ${STM32IMAGEPATH}
clean_stm32image:
${Q}${MAKE} --no-print-directory -C ${STM32IMAGEPATH} clean
check_dtc_version:
@if [ ${DTC_VERSION} -lt 10404 ]; then \
echo "dtc version too old (${DTC_V}), you need at least version 1.4.4"; \
false; \
fi
ifeq ($(STM32MP_USE_STM32IMAGE)-$(AARCH32_SP),1-sp_min)
${BUILD_PLAT}/stm32mp1-%.o: ${BUILD_PLAT}/fdts/%.dtb plat/st/stm32mp1/stm32mp1.S bl2 ${BL32_DEP}
@echo " AS stm32mp1.S"
${Q}${AS} ${ASFLAGS} ${TF_CFLAGS} \
-DDTB_BIN_PATH=\"$<\" \
-c $(word 2,$^) -o $@
else
# Create DTB file for BL2
${BUILD_PLAT}/fdts/%-bl2.dts: fdts/%.dts fdts/${BL2_DTSI} | ${BUILD_PLAT} fdt_dirs
@echo '#include "$(patsubst fdts/%,%,$<)"' > $@
@echo '#include "${BL2_DTSI}"' >> $@
${BUILD_PLAT}/fdts/%-bl2.dtb: ${BUILD_PLAT}/fdts/%-bl2.dts
ifeq ($(AARCH32_SP),sp_min)
# Create DTB file for BL32
${BUILD_PLAT}/fdts/%-bl32.dts: fdts/%.dts fdts/${BL32_DTSI} | ${BUILD_PLAT} fdt_dirs
@echo '#include "$(patsubst fdts/%,%,$<)"' > $@
@echo '#include "${BL32_DTSI}"' >> $@
${BUILD_PLAT}/fdts/%-bl32.dtb: ${BUILD_PLAT}/fdts/%-bl32.dts
endif
${BUILD_PLAT}/stm32mp1-%.o: ${BUILD_PLAT}/fdts/%-bl2.dtb plat/st/stm32mp1/stm32mp1.S bl2
@echo " AS stm32mp1.S"
${Q}${AS} ${ASFLAGS} ${TF_CFLAGS} \
-DDTB_BIN_PATH=\"$<\" \
-c plat/st/stm32mp1/stm32mp1.S -o $@
endif
$(eval $(call MAKE_LD,${STM32_TF_LINKERFILE},plat/st/stm32mp1/stm32mp1.ld.S,bl2))
tf-a-%.elf: stm32mp1-%.o ${STM32_TF_LINKERFILE}
@echo " LDS $<"
${Q}${LD} -o $@ ${STM32_TF_ELF_LDFLAGS} -Map=$(@:.elf=.map) --script ${STM32_TF_LINKERFILE} $<
tf-a-%.bin: tf-a-%.elf
${Q}${OC} -O binary $< $@
@echo
@echo "Built $@ successfully"
@echo
tf-a-%.stm32: ${STM32IMAGE} tf-a-%.bin
@echo
@echo "Generate $@"
$(eval LOADADDR = $(shell cat $(@:.stm32=.map) | grep RAM | awk '{print $$2}'))
$(eval ENTRY = $(shell cat $(@:.stm32=.map) | grep "__BL2_IMAGE_START" | awk '{print $$1}'))
${Q}${STM32IMAGE} -s $(word 2,$^) -d $@ \
-l $(LOADADDR) -e ${ENTRY} \
-v ${STM32_TF_VERSION} \
-m ${STM32_HEADER_VERSION_MAJOR} \
-n ${STM32_HEADER_VERSION_MINOR} \
-b ${STM32_HEADER_BL2_BINARY_TYPE}
@echo
Reference in a new issue View git blame Copy permalink