mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-17 01:54:22 +00:00
8620bd0b93
The toolchain refactor change introduces the `${toolchain}-${tool}-id`
variables, which provide identifiers for all of the toolchain tools used
by the build system. This change replaces the various conditions that
are in use to identify these tools based on the path with a standard set
of comparisons against these new identifier variables.
Change-Id: Ib60e592359fa6e415c19a012e68d660f87436ca7
Signed-off-by: Chris Kay <chris.kay@arm.com>
115 lines
3.1 KiB
Makefile
115 lines
3.1 KiB
Makefile
#
|
|
# Copyright (c) 2013-2024, Arm Limited and Contributors. All rights reserved.
|
|
#
|
|
# SPDX-License-Identifier: BSD-3-Clause
|
|
#
|
|
|
|
include lib/libfdt/libfdt.mk
|
|
include lib/xlat_tables_v2/xlat_tables.mk
|
|
|
|
include drivers/arm/gic/v2/gicv2.mk
|
|
|
|
PLAT_INCLUDES := -Iplat/rpi/common/include \
|
|
-Iplat/rpi/rpi4/include
|
|
|
|
PLAT_BL_COMMON_SOURCES := drivers/ti/uart/aarch64/16550_console.S \
|
|
drivers/arm/pl011/aarch64/pl011_console.S \
|
|
plat/rpi/common/rpi3_common.c \
|
|
${XLAT_TABLES_LIB_SRCS}
|
|
|
|
BL31_SOURCES += lib/cpus/aarch64/cortex_a72.S \
|
|
plat/rpi/common/aarch64/plat_helpers.S \
|
|
plat/rpi/rpi4/aarch64/armstub8_header.S \
|
|
drivers/delay_timer/delay_timer.c \
|
|
drivers/gpio/gpio.c \
|
|
drivers/rpi3/gpio/rpi3_gpio.c \
|
|
plat/common/plat_gicv2.c \
|
|
plat/rpi/rpi4/rpi4_bl31_setup.c \
|
|
plat/rpi/common/rpi3_pm.c \
|
|
plat/common/plat_psci_common.c \
|
|
plat/rpi/common/rpi3_topology.c \
|
|
common/fdt_fixup.c \
|
|
${LIBFDT_SRCS} \
|
|
${GICV2_SOURCES}
|
|
|
|
# For now we only support BL31, using the kernel loaded by the GPU firmware.
|
|
RESET_TO_BL31 := 1
|
|
|
|
# All CPUs enter armstub8.bin.
|
|
COLD_BOOT_SINGLE_CPU := 0
|
|
|
|
# Tune compiler for Cortex-A72
|
|
ifeq ($($(ARCH)-cc-id),arm-clang)
|
|
TF_CFLAGS_aarch64 += -mcpu=cortex-a72
|
|
else ifneq ($(filter %-clang,$($(ARCH)-cc-id)),)
|
|
TF_CFLAGS_aarch64 += -mcpu=cortex-a72
|
|
else
|
|
TF_CFLAGS_aarch64 += -mtune=cortex-a72
|
|
endif
|
|
|
|
# Add support for platform supplied linker script for BL31 build
|
|
$(eval $(call add_define,PLAT_EXTRA_LD_SCRIPT))
|
|
|
|
# Enable all errata workarounds for Cortex-A72
|
|
ERRATA_A72_859971 := 1
|
|
|
|
WORKAROUND_CVE_2017_5715 := 1
|
|
|
|
# Add new default target when compiling this platform
|
|
all: bl31
|
|
|
|
# Build config flags
|
|
# ------------------
|
|
|
|
# Disable stack protector by default
|
|
ENABLE_STACK_PROTECTOR := 0
|
|
|
|
# Have different sections for code and rodata
|
|
SEPARATE_CODE_AND_RODATA := 1
|
|
|
|
# Use Coherent memory
|
|
USE_COHERENT_MEM := 1
|
|
|
|
# Platform build flags
|
|
# --------------------
|
|
|
|
# There is not much else than a Linux kernel to load at the moment.
|
|
RPI3_DIRECT_LINUX_BOOT := 1
|
|
|
|
# BL33 images are in AArch64 by default
|
|
RPI3_BL33_IN_AARCH32 := 0
|
|
|
|
# UART to use at runtime. -1 means the runtime UART is disabled.
|
|
# Any other value means the default UART will be used.
|
|
RPI3_RUNTIME_UART := 0
|
|
|
|
# Use normal memory mapping for ROM, FIP, SRAM and DRAM
|
|
RPI3_USE_UEFI_MAP := 0
|
|
|
|
# SMCCC PCI support (should be enabled for ACPI builds)
|
|
SMC_PCI_SUPPORT := 0
|
|
|
|
# Process platform flags
|
|
# ----------------------
|
|
|
|
$(eval $(call add_define,RPI3_BL33_IN_AARCH32))
|
|
$(eval $(call add_define,RPI3_DIRECT_LINUX_BOOT))
|
|
ifdef RPI3_PRELOADED_DTB_BASE
|
|
$(eval $(call add_define,RPI3_PRELOADED_DTB_BASE))
|
|
endif
|
|
$(eval $(call add_define,RPI3_RUNTIME_UART))
|
|
$(eval $(call add_define,RPI3_USE_UEFI_MAP))
|
|
$(eval $(call add_define,SMC_PCI_SUPPORT))
|
|
|
|
ifeq (${ARCH},aarch32)
|
|
$(error Error: AArch32 not supported on rpi4)
|
|
endif
|
|
|
|
ifneq ($(ENABLE_STACK_PROTECTOR), 0)
|
|
PLAT_BL_COMMON_SOURCES += drivers/rpi3/rng/rpi3_rng.c \
|
|
plat/rpi/common/rpi3_stack_protector.c
|
|
endif
|
|
|
|
ifeq ($(SMC_PCI_SUPPORT), 1)
|
|
BL31_SOURCES += plat/rpi/rpi4/rpi4_pci_svc.c
|
|
endif
|