arm-trusted-firmware/drivers/cadence/uart/aarch64/cdns_console.S
Soby Mathew cc5859ca19 Multi-console: Deprecate the finish_console_register macro
The `finish_console_register` macro is used by the multi console
framework to register the `console_t` driver callbacks. It relied
on weak references to the `ldr` instruction to populate 0 to the
callback in case the driver has not defined the appropriate
function. Use of `ldr` instruction to load absolute address to a
reference makes the binary position dependant. These instructions
should be replaced with adrp/adr instruction for position independant
executable(PIE). But adrp/adr instructions don't work well with weak
references as described in GNU ld bugzilla issue 22589.

This patch defines a new version of `finish_console_register` macro
which can spcify which driver callbacks are valid and deprecates the
old one. If any of the argument is not specified, then the macro
populates 0 for that callback. Hence the functionality of the previous
deprecated macro is preserved. The USE_FINISH_CONSOLE_REG_2 define
is used to select the new variant of the macro and will be removed
once the deprecated variant is removed.

All the upstream console drivers have been migrated to use the new
macro in this patch.

NOTE: Platforms be aware that the new variant of the
`finish_console_register` should be used and the old variant is
deprecated.

Change-Id: Ia6a67aaf2aa3ba93932992d683587bbd0ad25259
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
2018-10-19 17:34:52 +01:00

231 lines
6.6 KiB
ArmAsm

/*
* Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
#include <cadence/cdns_uart.h>
#define USE_FINISH_CONSOLE_REG_2
#include <console_macros.S>
/*
* "core" functions are low-level implementations that don't require
* writable memory and are thus safe to call in BL1 crash context.
*/
.globl console_cdns_core_init
.globl console_cdns_core_putc
.globl console_cdns_core_getc
.globl console_cdns_core_flush
.globl console_cdns_putc
.globl console_cdns_getc
.globl console_cdns_flush
/* -----------------------------------------------
* int console_cdns_core_init(uintptr_t base_addr)
* Function to initialize the console without a
* C Runtime to print debug information. This
* function will be accessed by console_init and
* crash reporting.
* We assume that the bootloader already set up
* the HW (baud, ...) and only enable the trans-
* mitter and receiver here.
* In: x0 - console base address
* Out: return 1 on success else 0 on error
* Clobber list : x1, x2, x3
* -----------------------------------------------
*/
func console_cdns_core_init
/* Check the input base address */
cbz x0, core_init_fail
/* RX/TX enabled & reset */
mov w3, #(R_UART_CR_TX_EN | R_UART_CR_RX_EN | R_UART_CR_TXRST | R_UART_CR_RXRST)
str w3, [x0, #R_UART_CR]
mov w0, #1
ret
core_init_fail:
mov w0, wzr
ret
endfunc console_cdns_core_init
#if MULTI_CONSOLE_API
.globl console_cdns_register
/* -----------------------------------------------
* int console_cdns_register(uint64_t baseaddr,
* uint32_t clock, uint32_t baud,
* console_cdns_t *console);
* Function to initialize and register a new CDNS
* console. Storage passed in for the console struct
* *must* be persistent (i.e. not from the stack).
* In: x0 - UART register base address
* x1 - pointer to empty console_cdns_t struct
* Out: return 1 on success, 0 on error
* Clobber list : x0, x1, x2, x6, x7, x14
* -----------------------------------------------
*/
func console_cdns_register
mov x7, x30
mov x6, x1
cbz x6, register_fail
str x0, [x6, #CONSOLE_T_CDNS_BASE]
bl console_cdns_core_init
cbz x0, register_fail
mov x0, x6
mov x30, v7
finish_console_register cdns putc=1, getc=1, flush=1
register_fail:
ret x7
endfunc console_cdns_register
#else
.globl console_core_init
.globl console_core_putc
.globl console_core_getc
.globl console_core_flush
.equ console_core_init,console_cdns_core_init
.equ console_core_putc,console_cdns_core_putc
.equ console_core_getc,console_cdns_core_getc
.equ console_core_flush,console_cdns_core_flush
#endif
/* --------------------------------------------------------
* int console_cdns_core_putc(int c, uintptr_t base_addr)
* Function to output a character over the console. It
* returns the character printed on success or -1 on error.
* In : w0 - character to be printed
* x1 - console base address
* Out : return -1 on error else return character.
* Clobber list : x2
* --------------------------------------------------------
*/
func console_cdns_core_putc
#if ENABLE_ASSERTIONS
cmp x1, #0
ASM_ASSERT(ne)
#endif /* ENABLE_ASSERTIONS */
/* Prepend '\r' to '\n' */
cmp w0, #0xA
b.ne 2f
1:
/* Check if the transmit FIFO is full */
ldr w2, [x1, #R_UART_SR]
tbnz w2, #UART_SR_INTR_TFUL_BIT, 1b
mov w2, #0xD
str w2, [x1, #R_UART_TX]
2:
/* Check if the transmit FIFO is full */
ldr w2, [x1, #R_UART_SR]
tbnz w2, #UART_SR_INTR_TFUL_BIT, 2b
str w0, [x1, #R_UART_TX]
ret
endfunc console_cdns_core_putc
/* --------------------------------------------------------
* int console_cdns_putc(int c, console_cdns_t *cdns)
* Function to output a character over the console. It
* returns the character printed on success or -1 on error.
* In : w0 - character to be printed
* x1 - pointer to console_t structure
* Out : return -1 on error else return character.
* Clobber list : x2
* --------------------------------------------------------
*/
func console_cdns_putc
#if ENABLE_ASSERTIONS
cmp x1, #0
ASM_ASSERT(ne)
#endif /* ENABLE_ASSERTIONS */
ldr x1, [x1, #CONSOLE_T_CDNS_BASE]
b console_cdns_core_putc
endfunc console_cdns_putc
/* ---------------------------------------------
* int console_cdns_core_getc(uintptr_t base_addr)
* Function to get a character from the console.
* It returns the character grabbed on success
* or -1 if no character is available.
* In : x0 - console base address
* Out: w0 - character if available, else -1
* Clobber list : x0, x1
* ---------------------------------------------
*/
func console_cdns_core_getc
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif /* ENABLE_ASSERTIONS */
/* Check if the receive FIFO is empty */
ldr w1, [x0, #R_UART_SR]
tbnz w1, #UART_SR_INTR_REMPTY_BIT, no_char
ldr w1, [x0, #R_UART_RX]
mov w0, w1
ret
no_char:
mov w0, #ERROR_NO_PENDING_CHAR
ret
endfunc console_cdns_core_getc
/* ---------------------------------------------
* int console_cdns_getc(console_cdns_t *console)
* Function to get a character from the console.
* It returns the character grabbed on success
* or -1 if no character is available.
* In : x0 - pointer to console_t structure
* Out: w0 - character if available, else -1
* Clobber list : x0, x1
* ---------------------------------------------
*/
func console_cdns_getc
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif /* ENABLE_ASSERTIONS */
ldr x0, [x0, #CONSOLE_T_CDNS_BASE]
b console_cdns_core_getc
endfunc console_cdns_getc
/* ---------------------------------------------
* int console_cdns_core_flush(uintptr_t base_addr)
* Function to force a write of all buffered
* data that hasn't been output.
* In : x0 - console base address
* Out : return -1 on error else return 0.
* Clobber list : x0, x1
* ---------------------------------------------
*/
func console_cdns_core_flush
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif /* ENABLE_ASSERTIONS */
/* Placeholder */
mov w0, #0
ret
endfunc console_cdns_core_flush
/* ---------------------------------------------
* int console_cdns_flush(console_pl011_t *console)
* Function to force a write of all buffered
* data that hasn't been output.
* In : x0 - pointer to console_t structure
* Out : return -1 on error else return 0.
* Clobber list : x0, x1
* ---------------------------------------------
*/
func console_cdns_flush
#if ENABLE_ASSERTIONS
cmp x0, #0
ASM_ASSERT(ne)
#endif /* ENABLE_ASSERTIONS */
ldr x0, [x0, #CONSOLE_T_CDNS_BASE]
b console_cdns_core_flush
endfunc console_cdns_flush