Djam/arm-trusted-firmware
1
0
Fork 0
mirror of https://github.com/ARM-software/arm-trusted-firmware.git synced 2025-04-16 17:44:19 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
arm-trusted-firmware/plat/st/stm32mp1/platform.mk
Yann Gautier 84686ba347 stm32mp1: dynamically map DDR later and non-cacheable during its test 
A speculative accesses to DDR could be done whereas it was not reachable
and could lead to bus stall.
To correct this the dynamic mapping in MMU is used.
A first mapping is done for DDR tests with MT_NON_CACHEABLE attribute,
once DDR access is setup. It is then unmapped and a new mapping DDR is done
with cacheable attribute (through MT_MEMORY) to speed-up BL33 (or OP-TEE)
load.

The disabling of cache during DDR tests is also removed, as now useless.
A call to new functions stm32mp_{,un}map_ddr_non_cacheable() is done
instead.

PLAT_XLAT_TABLES_DYNAMIC is activated globally as used in BL2 and BL32.

BL33 max size is also updated to take into account the secure and shared
memory areas. Those are used in OP-TEE case.

Change-Id: I22c48b4a48255ee264991c34ecbb15bfe87e67c3
Signed-off-by: Yann Gautier <yann.gautier@st.com>
2020-03-26 18:33:39 +01:00

220 lines
6.7 KiB
Makefile
Raw Blame History

#
# Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
ARM_CORTEX_A7 := yes
ARM_WITH_NEON := yes
BL2_AT_EL3 := 1
USE_COHERENT_MEM := 0
STM32_TF_VERSION ?= 0
# Enable dynamic memory mapping
PLAT_XLAT_TABLES_DYNAMIC := 1
$(eval $(call assert_boolean,PLAT_XLAT_TABLES_DYNAMIC))
$(eval $(call add_define,PLAT_XLAT_TABLES_DYNAMIC))
# Not needed for Cortex-A7
WORKAROUND_CVE_2017_5715:= 0
# Number of TF-A copies in the device
STM32_TF_A_COPIES := 2
$(eval $(call add_define,STM32_TF_A_COPIES))
ifeq ($(AARCH32_SP),optee)
PLAT_PARTITION_MAX_ENTRIES := $(shell echo $$(($(STM32_TF_A_COPIES) + 4)))
else
PLAT_PARTITION_MAX_ENTRIES := $(shell echo $$(($(STM32_TF_A_COPIES) + 1)))
endif
$(eval $(call add_define,PLAT_PARTITION_MAX_ENTRIES))
# Boot devices
STM32MP_EMMC ?= 0
STM32MP_SDMMC ?= 0
STM32MP_RAW_NAND ?= 0
STM32MP_SPI_NAND ?= 0
STM32MP_SPI_NOR ?= 0
ifeq ($(filter 1,${STM32MP_EMMC} ${STM32MP_SDMMC} ${STM32MP_RAW_NAND} \
${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
$(error "No boot device driver is enabled")
endif
$(eval $(call assert_boolean,STM32MP_EMMC))
$(eval $(call assert_boolean,STM32MP_SDMMC))
$(eval $(call assert_boolean,STM32MP_RAW_NAND))
$(eval $(call assert_boolean,STM32MP_SPI_NAND))
$(eval $(call assert_boolean,STM32MP_SPI_NOR))
$(eval $(call add_define,STM32MP_EMMC))
$(eval $(call add_define,STM32MP_SDMMC))
$(eval $(call add_define,STM32MP_RAW_NAND))
$(eval $(call add_define,STM32MP_SPI_NAND))
$(eval $(call add_define,STM32MP_SPI_NOR))
PLAT_INCLUDES := -Iplat/st/common/include/
PLAT_INCLUDES += -Iplat/st/stm32mp1/include/
# Device tree
DTB_FILE_NAME ?= stm32mp157c-ev1.dtb
FDT_SOURCES := $(addprefix fdts/, $(patsubst %.dtb,%.dts,$(DTB_FILE_NAME)))
DTC_FLAGS += -Wno-unit_address_vs_reg
include lib/libfdt/libfdt.mk
PLAT_BL_COMMON_SOURCES := plat/st/common/stm32mp_common.c \
plat/st/stm32mp1/stm32mp1_private.c
PLAT_BL_COMMON_SOURCES += drivers/st/uart/aarch32/stm32_console.S
ifneq (${ENABLE_STACK_PROTECTOR},0)
PLAT_BL_COMMON_SOURCES += plat/st/stm32mp1/stm32mp1_stack_protector.c
endif
include lib/xlat_tables_v2/xlat_tables.mk
PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
PLAT_BL_COMMON_SOURCES += lib/cpus/aarch32/cortex_a7.S
PLAT_BL_COMMON_SOURCES += drivers/arm/tzc/tzc400.c \
drivers/delay_timer/delay_timer.c \
drivers/delay_timer/generic_delay_timer.c \
drivers/st/bsec/bsec.c \
drivers/st/clk/stm32mp_clkfunc.c \
drivers/st/clk/stm32mp1_clk.c \
drivers/st/ddr/stm32mp1_ddr_helpers.c \
drivers/st/gpio/stm32_gpio.c \
drivers/st/i2c/stm32_i2c.c \
drivers/st/iwdg/stm32_iwdg.c \
drivers/st/pmic/stm32mp_pmic.c \
drivers/st/pmic/stpmic1.c \
drivers/st/reset/stm32mp1_reset.c \
plat/st/common/stm32mp_dt.c \
plat/st/stm32mp1/stm32mp1_context.c \
plat/st/stm32mp1/stm32mp1_dbgmcu.c \
plat/st/stm32mp1/stm32mp1_helper.S \
plat/st/stm32mp1/stm32mp1_security.c \
plat/st/stm32mp1/stm32mp1_syscfg.c
BL2_SOURCES += drivers/io/io_block.c \
drivers/io/io_dummy.c \
drivers/io/io_mtd.c \
drivers/io/io_storage.c \
drivers/st/crypto/stm32_hash.c \
drivers/st/io/io_stm32image.c \
plat/st/common/stm32mp_auth.c \
plat/st/common/bl2_io_storage.c \
plat/st/stm32mp1/bl2_plat_setup.c
ifneq ($(filter 1,${STM32MP_EMMC} ${STM32MP_SDMMC}),)
BL2_SOURCES += drivers/mmc/mmc.c \
drivers/partition/gpt.c \
drivers/partition/partition.c \
drivers/st/io/io_mmc.c \
drivers/st/mmc/stm32_sdmmc2.c
endif
ifeq (${STM32MP_RAW_NAND},1)
$(eval $(call add_define_val,NAND_ONFI_DETECT,1))
BL2_SOURCES += drivers/mtd/nand/raw_nand.c \
drivers/st/fmc/stm32_fmc2_nand.c
endif
ifeq (${STM32MP_SPI_NAND},1)
BL2_SOURCES += drivers/mtd/nand/spi_nand.c
endif
ifeq (${STM32MP_SPI_NOR},1)
BL2_SOURCES += drivers/mtd/nor/spi_nor.c
endif
ifneq ($(filter 1,${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
BL2_SOURCES += drivers/mtd/spi-mem/spi_mem.c \
drivers/st/spi/stm32_qspi.c
endif
ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND}),)
BL2_SOURCES += drivers/mtd/nand/core.c
endif
ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
BL2_SOURCES += plat/st/stm32mp1/stm32mp1_boot_device.c
endif
BL2_SOURCES += drivers/st/ddr/stm32mp1_ddr.c \
drivers/st/ddr/stm32mp1_ram.c
BL2_SOURCES += common/desc_image_load.c \
plat/st/stm32mp1/plat_bl2_mem_params_desc.c \
plat/st/stm32mp1/plat_image_load.c
ifeq ($(AARCH32_SP),optee)
BL2_SOURCES += lib/optee/optee_utils.c
endif
# Macros and rules to build TF binary
STM32_TF_ELF_LDFLAGS := --hash-style=gnu --as-needed
STM32_TF_STM32 := $(addprefix ${BUILD_PLAT}/tf-a-, $(patsubst %.dtb,%.stm32,$(DTB_FILE_NAME)))
STM32_TF_LINKERFILE := ${BUILD_PLAT}/stm32mp1.ld
# Variables for use with stm32image
STM32IMAGEPATH ?= tools/stm32image
STM32IMAGE ?= ${STM32IMAGEPATH}/stm32image${BIN_EXT}
.PHONY: check_dtc_version stm32image clean_stm32image
.SUFFIXES:
all: check_dtc_version ${STM32_TF_STM32} stm32image
ifeq ($(AARCH32_SP),sp_min)
# BL32 is built only if using SP_MIN
BL32_DEP := bl32
BL32_PATH := -DBL32_BIN_PATH=\"${BUILD_PLAT}/bl32.bin\"
endif
distclean realclean clean: clean_stm32image
stm32image:
${Q}${MAKE} CPPFLAGS="" --no-print-directory -C ${STM32IMAGEPATH}
clean_stm32image:
${Q}${MAKE} --no-print-directory -C ${STM32IMAGEPATH} clean
check_dtc_version:
$(eval DTC_V = $(shell $(DTC) -v | awk '{print $$NF}'))
$(eval DTC_VERSION = $(shell printf "%d" $(shell echo ${DTC_V} | cut -d- -f1 | sed "s/\./0/g")))
@if [ ${DTC_VERSION} -lt 10404 ]; then \
echo "dtc version too old (${DTC_V}), you need at least version 1.4.4"; \
false; \
fi
${BUILD_PLAT}/stm32mp1-%.o: ${BUILD_PLAT}/fdts/%.dtb plat/st/stm32mp1/stm32mp1.S bl2 ${BL32_DEP}
@echo " AS stm32mp1.S"
${Q}${AS} ${ASFLAGS} ${TF_CFLAGS} \
${BL32_PATH} \
-DBL2_BIN_PATH=\"${BUILD_PLAT}/bl2.bin\" \
-DDTB_BIN_PATH=\"$<\" \
-c plat/st/stm32mp1/stm32mp1.S -o $@
${STM32_TF_LINKERFILE}: plat/st/stm32mp1/stm32mp1.ld.S ${BUILD_PLAT}
@echo " LDS $<"
${Q}${AS} ${ASFLAGS} ${TF_CFLAGS} -P -E $< -o $@
tf-a-%.elf: stm32mp1-%.o ${STM32_TF_LINKERFILE}
@echo " LDS $<"
${Q}${LD} -o $@ ${STM32_TF_ELF_LDFLAGS} -Map=$(@:.elf=.map) --script ${STM32_TF_LINKERFILE} $<
tf-a-%.bin: tf-a-%.elf
${Q}${OC} -O binary $< $@
@echo
@echo "Built $@ successfully"
@echo
tf-a-%.stm32: tf-a-%.bin stm32image
@echo
@echo "Generated $@"
$(eval LOADADDR = $(shell cat $(@:.stm32=.map) | grep RAM | awk '{print $$2}'))
$(eval ENTRY = $(shell cat $(@:.stm32=.map) | grep "__BL2_IMAGE_START" | awk '{print $$1}'))
${STM32IMAGE} -s $< -d $@ -l $(LOADADDR) -e ${ENTRY} -v ${STM32_TF_VERSION}
@echo
Reference in a new issue View git blame Copy permalink