arm-trusted-firmware/lib/cpus/aarch64/cortex_arcadia.S
Boyan Karatotev 2590e819eb perf(mpmm): greatly simplify MPMM enablement
MPMM is a core-specific microarchitectural feature. It has been present
in every Arm core since the Cortex-A510 and has been implemented in
exactly the same way. Despite that, it is enabled more like an
architectural feature with a top level enable flag. This utilised the
identical implementation.

This duality has left MPMM in an awkward place, where its enablement
should be generic, like an architectural feature, but since it is not,
it should also be core-specific if it ever changes. One choice to do
this has been through the device tree.

This has worked just fine so far, however, recent implementations expose
a weakness in that this is rather slow - the device tree has to be read,
there's a long call stack of functions with many branches, and system
registers are read. In the hot path of PSCI CPU powerdown, this has a
significant and measurable impact. Besides it being a rather large
amount of code that is difficult to understand.

Since MPMM is a microarchitectural feature, its correct placement is in
the reset function. The essence of the current enablement is to write
CPUPPMCR_EL3.MPMM_EN if CPUPPMCR_EL3.MPMMPINCTL == 0. Replacing the C
enablement with an assembly macro in each CPU's reset function achieves
the same effect with just a single close branch and a grand total of 6
instructions (versus the old 2 branches and 32 instructions).

Having done this, the device tree entry becomes redundant. Should a core
that doesn't support MPMM arise, this can cleanly be handled in the
reset function. As such, the whole ENABLE_MPMM_FCONF and platform hooks
mechanisms become obsolete and are removed.

Change-Id: I1d0475b21a1625bb3519f513ba109284f973ffdf
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
2025-02-25 08:50:45 +00:00

67 lines
2 KiB
ArmAsm

/*
* Copyright (c) 2024-2025, Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <asm_macros.S>
#include <common/bl_common.h>
#include <cortex_arcadia.h>
#include <cpu_macros.S>
#include <plat_macros.S>
/* Hardware handled coherency */
#if HW_ASSISTED_COHERENCY == 0
#error "Cortex-ARCADIA must be compiled with HW_ASSISTED_COHERENCY enabled"
#endif
/* 64-bit only core */
#if CTX_INCLUDE_AARCH32_REGS == 1
#error "Cortex-ARCADIA supports only AArch64. Compile with CTX_INCLUDE_AARCH32_REGS=0"
#endif
cpu_reset_prologue cortex_arcadia
cpu_reset_func_start cortex_arcadia
/* Disable speculative loads */
msr SSBS, xzr
enable_mpmm
cpu_reset_func_end cortex_arcadia
/* ----------------------------------------------------
* HW will do the cache maintenance while powering down
* ----------------------------------------------------
*/
func cortex_arcadia_core_pwr_dwn
/* ---------------------------------------------------
* Enable CPU power down bit in power control register
* ---------------------------------------------------
*/
sysreg_bit_set CORTEX_ARCADIA_CPUPWRCTLR_EL1, CORTEX_ARCADIA_CPUPWRCTLR_EL1_CORE_PWRDN_BIT
isb
ret
endfunc cortex_arcadia_core_pwr_dwn
/* ---------------------------------------------
* This function provides Cortex-Arcadia specific
* register information for crash reporting.
* It needs to return with x6 pointing to
* a list of register names in ascii and
* x8 - x15 having values of registers to be
* reported.
* ---------------------------------------------
*/
.section .rodata.cortex_arcadia_regs, "aS"
cortex_arcadia_regs: /* The ascii list of register names to be reported */
.asciz "cpuectlr_el1", ""
func cortex_arcadia_cpu_reg_dump
adr x6, cortex_arcadia_regs
mrs x8, CORTEX_ARCADIA_CPUECTLR_EL1
ret
endfunc cortex_arcadia_cpu_reg_dump
declare_cpu_ops cortex_arcadia, CORTEX_ARCADIA_MIDR, \
cortex_arcadia_reset_func, \
cortex_arcadia_core_pwr_dwn