Djam/arm-trusted-firmware
1
0
Fork 0
mirror of https://github.com/ARM-software/arm-trusted-firmware.git synced 2025-04-26 23:04:50 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
arm-trusted-firmware/plat/arm/board/tc/platform.mk
Boyan Karatotev 1b8ed0993f feat(tc): factor in FVP/FPGA differences 
Even though the FVP and FPGA are meant to be identical their RoS's (rest
of system) are different. Factor these in so the device tree works for
both. The differences are:
 * addresses of GIC and UART
 * displays (FPGA uses 4k)
 * ethernet devices and SD card (it's non removable on the FPGA)

Their frequencies are also different. The FVP simulates certain
frequencies but isn't very sensitive when we disregard them. To keep
code similar, update them with the FPGA values. This keeps working on
FVP even if slightly incorrect.

Also add an option for the DPU to either use fixed clocks or SCMI set
clocks, hidden behind a flag. This is useful during bringup and because
SCMI may not necessarily work on FPGA.

Co-developed-by: Kshitij Sisodia <kshitij.sisodia@arm.com>
Co-developed-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Co-developed-by: Usama Arif <usama.arif@arm.com>
Co-developed-by: Angel Rodriguez Garcia <angel.rodriguezgarcia@arm.com>
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Ic7a4bfc302673a3a6571757e23a9e6184fba2a13
2024-02-26 13:41:25 +00:00

222 lines
6.3 KiB
Makefile
Raw Blame History

# Copyright (c) 2021-2024, Arm Limited. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
include common/fdt_wrappers.mk
TARGET_FLAVOUR := fvp
# DPU with SCMI may not necessarily work, so allow its independence
TC_DPU_USE_SCMI_CLK := 1
ifneq ($(shell expr $(TARGET_PLATFORM) \<= 1), 0)
$(warning Platform ${PLAT}$(TARGET_PLATFORM) is deprecated. \
Some of the features might not work as expected)
endif
ifeq ($(shell expr $(TARGET_PLATFORM) \<= 3), 0)
$(error TARGET_PLATFORM must be less than or equal to 3)
endif
ifeq ($(filter ${TARGET_FLAVOUR}, fvp fpga),)
$(error TARGET_FLAVOUR must be fvp or fpga)
endif
$(eval $(call add_defines, \
TARGET_PLATFORM \
TARGET_FLAVOUR_$(call uppercase,${TARGET_FLAVOUR}) \
TC_DPU_USE_SCMI_CLK \
))
CSS_LOAD_SCP_IMAGES := 1
CSS_USE_SCMI_SDS_DRIVER := 1
ENABLE_FEAT_RAS := 1
SDEI_SUPPORT := 0
EL3_EXCEPTION_HANDLING := 0
HANDLE_EA_EL3_FIRST_NS := 0
# System coherency is managed in hardware
HW_ASSISTED_COHERENCY := 1
# When building for systems with hardware-assisted coherency, there's no need to
# use USE_COHERENT_MEM. Require that USE_COHERENT_MEM must be set to 0 too.
USE_COHERENT_MEM := 0
GIC_ENABLE_V4_EXTN := 1
# GIC-600 configuration
GICV3_SUPPORT_GIC600 := 1
# Enable SVE
ENABLE_SVE_FOR_NS := 2
ENABLE_SVE_FOR_SWD := 1
# enable trace buffer control registers access to NS by default
ENABLE_TRBE_FOR_NS := 1
# enable trace system registers access to NS by default
ENABLE_SYS_REG_TRACE_FOR_NS := 1
# enable trace filter control registers access to NS by default
ENABLE_TRF_FOR_NS := 1
# Include GICv3 driver files
include drivers/arm/gic/v3/gicv3.mk
ENT_GIC_SOURCES := ${GICV3_SOURCES} \
plat/common/plat_gicv3.c \
plat/arm/common/arm_gicv3.c
override NEED_BL2U := no
override ARM_PLAT_MT := 1
TC_BASE = plat/arm/board/tc
PLAT_INCLUDES += -I${TC_BASE}/include/ \
-I${TC_BASE}/fdts/
# CPU libraries for TARGET_PLATFORM=1
ifeq (${TARGET_PLATFORM}, 1)
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a510.S \
lib/cpus/aarch64/cortex_a715.S \
lib/cpus/aarch64/cortex_x3.S
endif
# CPU libraries for TARGET_PLATFORM=2
ifeq (${TARGET_PLATFORM}, 2)
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \
lib/cpus/aarch64/cortex_a720.S \
lib/cpus/aarch64/cortex_x4.S
endif
# CPU libraries for TARGET_PLATFORM=3
ifeq (${TARGET_PLATFORM}, 3)
TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \
lib/cpus/aarch64/cortex_chaberton.S \
lib/cpus/aarch64/cortex_blackhawk.S
endif
INTERCONNECT_SOURCES := ${TC_BASE}/tc_interconnect.c
PLAT_BL_COMMON_SOURCES += ${TC_BASE}/tc_plat.c \
${TC_BASE}/include/tc_helpers.S
BL1_SOURCES += ${INTERCONNECT_SOURCES} \
${TC_CPU_SOURCES} \
${TC_BASE}/tc_trusted_boot.c \
${TC_BASE}/tc_err.c \
drivers/arm/sbsa/sbsa.c
BL2_SOURCES += ${TC_BASE}/tc_security.c \
${TC_BASE}/tc_err.c \
${TC_BASE}/tc_trusted_boot.c \
${TC_BASE}/tc_bl2_setup.c \
lib/utils/mem_region.c \
drivers/arm/tzc/tzc400.c \
plat/arm/common/arm_tzc400.c \
plat/arm/common/arm_nor_psci_mem_protect.c
BL31_SOURCES += ${INTERCONNECT_SOURCES} \
${TC_CPU_SOURCES} \
${ENT_GIC_SOURCES} \
${TC_BASE}/tc_bl31_setup.c \
${TC_BASE}/tc_topology.c \
lib/fconf/fconf.c \
lib/fconf/fconf_dyn_cfg_getter.c \
drivers/cfi/v2m/v2m_flash.c \
lib/utils/mem_region.c \
plat/arm/common/arm_nor_psci_mem_protect.c \
drivers/arm/sbsa/sbsa.c
BL31_SOURCES += ${FDT_WRAPPERS_SOURCES}
# Add the FDT_SOURCES and options for Dynamic Config
FDT_SOURCES += ${TC_BASE}/fdts/${PLAT}_fw_config.dts \
${TC_BASE}/fdts/${PLAT}_tb_fw_config.dts
FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
# Add the FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG}))
# Add the TB_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG}))
ifeq (${SPD},spmd)
ifeq ($(ARM_SPMC_MANIFEST_DTS),)
ARM_SPMC_MANIFEST_DTS := ${TC_BASE}/fdts/${PLAT}_spmc_test_manifest.dts
endif
FDT_SOURCES += ${ARM_SPMC_MANIFEST_DTS}
TC_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/$(notdir $(basename ${ARM_SPMC_MANIFEST_DTS})).dtb
# Add the TOS_FW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TC_TOS_FW_CONFIG},--tos-fw-config,${TC_TOS_FW_CONFIG}))
endif
#Device tree
TC_HW_CONFIG_DTS := fdts/tc.dts
TC_HW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}.dtb
FDT_SOURCES += ${TC_HW_CONFIG_DTS}
$(eval TC_HW_CONFIG := ${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(TC_HW_CONFIG_DTS)))
# Add the HW_CONFIG to FIP and specify the same to certtool
$(eval $(call TOOL_ADD_PAYLOAD,${TC_HW_CONFIG},--hw-config,${TC_HW_CONFIG}))
override CTX_INCLUDE_AARCH32_REGS := 0
override CTX_INCLUDE_PAUTH_REGS := 1
override ENABLE_SPE_FOR_NS := 0
override ENABLE_FEAT_AMU := 1
ENABLE_AMU_AUXILIARY_COUNTERS := 1
ENABLE_AMU_FCONF := 1
ENABLE_MPMM := 1
ENABLE_MPMM_FCONF := 1
# Include Measured Boot makefile before any Crypto library makefile.
# Crypto library makefile may need default definitions of Measured Boot build
# flags present in Measured Boot makefile.
ifeq (${MEASURED_BOOT},1)
MEASURED_BOOT_MK := drivers/measured_boot/rss/rss_measured_boot.mk
$(info Including ${MEASURED_BOOT_MK})
include ${MEASURED_BOOT_MK}
$(info Including rss_comms.mk)
include drivers/arm/rss/rss_comms.mk
BL1_SOURCES += ${MEASURED_BOOT_SOURCES} \
plat/arm/board/tc/tc_common_measured_boot.c \
plat/arm/board/tc/tc_bl1_measured_boot.c \
lib/psa/measured_boot.c \
${RSS_COMMS_SOURCES}
BL2_SOURCES += ${MEASURED_BOOT_SOURCES} \
plat/arm/board/tc/tc_common_measured_boot.c \
plat/arm/board/tc/tc_bl2_measured_boot.c \
lib/psa/measured_boot.c \
${RSS_COMMS_SOURCES}
PLAT_INCLUDES += -Iinclude/lib/psa
endif
ifneq (${PLATFORM_TEST},)
# Add this include as first, before arm_common.mk. This is necessary
# because arm_common.mk builds Mbed TLS, and platform_test.mk can
# change the list of Mbed TLS files that are to be compiled
# (LIBMBEDTLS_SRCS).
include plat/arm/board/tc/platform_test.mk
endif
include plat/arm/common/arm_common.mk
include plat/arm/css/common/css_common.mk
include plat/arm/soc/common/soc_css.mk
include plat/arm/board/common/board_common.mk
Reference in a new issue View git blame Copy permalink