mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-16 17:44:19 +00:00

found using codespell (https://github.com/codespell-project/codespell). Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I1bfa797e3460adddeefa916bb68e22beddaf6373
702 lines
20 KiB
C
702 lines
20 KiB
C
/*
|
|
* Copyright (c) 2022-2023, STMicroelectronics - All Rights Reserved
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#include <assert.h>
|
|
#include <errno.h>
|
|
#include <stdint.h>
|
|
|
|
#include <drivers/clk.h>
|
|
#include <drivers/delay_timer.h>
|
|
#include <drivers/st/stm32_pka.h>
|
|
#include <drivers/st/stm32mp_reset.h>
|
|
#include <lib/mmio.h>
|
|
#include <lib/utils.h>
|
|
#include <libfdt.h>
|
|
#include <plat/common/platform.h>
|
|
|
|
#include <platform_def.h>
|
|
|
|
#if !PKA_USE_NIST_P256 && !PKA_USE_BRAINPOOL_P256R1 && !PKA_USE_BRAINPOOL_P256T1 && \
|
|
!PKA_USE_NIST_P521
|
|
#error "At least one ECDSA curve needs to be selected"
|
|
#endif
|
|
|
|
/*
|
|
* For our comprehension in this file
|
|
* _len are in BITs
|
|
* _size are in BYTEs
|
|
* _nbw are in number of PKA_word (PKA_word = u64)
|
|
*/
|
|
|
|
#define UINT8_LEN 8U
|
|
#define UINT64_LEN (UINT8_LEN * sizeof(uint64_t))
|
|
#define WORD_SIZE (sizeof(uint64_t))
|
|
#define OP_NBW_FROM_LEN(len) (DIV_ROUND_UP_2EVAL((len), UINT64_LEN) + 1)
|
|
#define OP_NBW_FROM_SIZE(s) OP_NBW_FROM_LEN((s) * UINT8_LEN)
|
|
#define OP_SIZE_FROM_SIZE(s) (OP_NBW_FROM_SIZE(s) * WORD_SIZE)
|
|
|
|
#define DT_PKA_COMPAT "st,stm32-pka64"
|
|
|
|
#define MAX_ECC_SIZE_LEN 640U
|
|
#define MAX_EO_NBW OP_NBW_FROM_LEN(MAX_ECC_SIZE_LEN)
|
|
|
|
/* PKA registers */
|
|
/* PKA control register */
|
|
#define _PKA_CR 0x0U
|
|
/* PKA status register */
|
|
#define _PKA_SR 0x4U
|
|
/* PKA clear flag register */
|
|
#define _PKA_CLRFR 0x8U
|
|
/* PKA version register */
|
|
#define _PKA_VERR 0x1FF4U
|
|
/* PKA identification register */
|
|
#define _PKA_IPIDR 0x1FF8U
|
|
|
|
/* PKA control register fields */
|
|
#define _PKA_CR_MODE_MASK GENMASK(13, 8)
|
|
#define _PKA_CR_MODE_SHIFT 8U
|
|
#define _PKA_CR_MODE_ADD 0x9U
|
|
#define _PKA_CR_MODE_ECDSA_VERIF 0x26U
|
|
#define _PKA_CR_START BIT(1)
|
|
#define _PKA_CR_EN BIT(0)
|
|
|
|
/* PKA status register fields */
|
|
#define _PKA_SR_BUSY BIT(16)
|
|
#define _PKA_SR_LMF BIT(1)
|
|
#define _PKA_SR_INITOK BIT(0)
|
|
|
|
/* PKA it flag fields (used in CR, SR and CLRFR) */
|
|
#define _PKA_IT_MASK (GENMASK(21, 19) | BIT(17))
|
|
#define _PKA_IT_SHIFT 17U
|
|
#define _PKA_IT_OPERR BIT(21)
|
|
#define _PKA_IT_ADDRERR BIT(20)
|
|
#define _PKA_IT_RAMERR BIT(19)
|
|
#define _PKA_IT_PROCEND BIT(17)
|
|
|
|
/* PKA version register fields */
|
|
#define _PKA_VERR_MAJREV_MASK GENMASK(7, 4)
|
|
#define _PKA_VERR_MAJREV_SHIFT 4U
|
|
#define _PKA_VERR_MINREV_MASK GENMASK(3, 0)
|
|
#define _PKA_VERR_MINREV_SHIFT 0U
|
|
|
|
/* RAM magic offset */
|
|
#define _PKA_RAM_START 0x400U
|
|
#define _PKA_RAM_SIZE 5336U
|
|
|
|
/* ECDSA verification */
|
|
#define _PKA_RAM_N_LEN 0x408U /* 64 */
|
|
#define _PKA_RAM_P_LEN 0x4C8U /* 64 */
|
|
#define _PKA_RAM_A_SIGN 0x468U /* 64 */
|
|
#define _PKA_RAM_A 0x470U /* EOS */
|
|
#define _PKA_RAM_P 0x4D0U /* EOS */
|
|
#define _PKA_RAM_XG 0x678U /* EOS */
|
|
#define _PKA_RAM_YG 0x6D0U /* EOS */
|
|
#define _PKA_RAM_XQ 0x12F8U /* EOS */
|
|
#define _PKA_RAM_YQ 0x1350U /* EOS */
|
|
#define _PKA_RAM_SIGN_R 0x10E0U /* EOS */
|
|
#define _PKA_RAM_SIGN_S 0xC68U /* EOS */
|
|
#define _PKA_RAM_HASH_Z 0x13A8U /* EOS */
|
|
#define _PKA_RAM_PRIME_N 0x1088U /* EOS */
|
|
#define _PKA_RAM_ECDSA_VERIFY 0x5D0U /* 64 */
|
|
#define _PKA_RAM_ECDSA_VERIFY_VALID 0xD60DULL
|
|
#define _PKA_RAM_ECDSA_VERIFY_INVALID 0xA3B7ULL
|
|
|
|
#define PKA_TIMEOUT_US 1000000U
|
|
#define TIMEOUT_US_1MS 1000U
|
|
#define PKA_RESET_DELAY 20U
|
|
|
|
struct curve_parameters {
|
|
uint32_t a_sign; /* 0 positive, 1 negative */
|
|
uint8_t *a; /* Curve coefficient |a| */
|
|
size_t a_size;
|
|
uint8_t *p; /* Curve modulus value */
|
|
uint32_t p_len;
|
|
uint8_t *xg; /* Curve base point G coordinate x */
|
|
size_t xg_size;
|
|
uint8_t *yg; /* Curve base point G coordinate y */
|
|
size_t yg_size;
|
|
uint8_t *n; /* Curve prime order n */
|
|
uint32_t n_len;
|
|
};
|
|
|
|
static const struct curve_parameters curve_def[] = {
|
|
#if PKA_USE_NIST_P256
|
|
[PKA_NIST_P256] = {
|
|
.p_len = 256U,
|
|
.n_len = 256U,
|
|
.p = (uint8_t[]){0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x01,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
|
|
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF},
|
|
.n = (uint8_t[]){0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00,
|
|
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
|
0xBC, 0xE6, 0xFA, 0xAD, 0xA7, 0x17, 0x9E, 0x84,
|
|
0xF3, 0xB9, 0xCA, 0xC2, 0xFC, 0x63, 0x25, 0x51},
|
|
.a_sign = 1U,
|
|
.a = (uint8_t[]){0x03},
|
|
.a_size = 1U,
|
|
.xg = (uint8_t[]){0x6B, 0x17, 0xD1, 0xF2, 0xE1, 0x2C, 0x42, 0x47,
|
|
0xF8, 0xBC, 0xE6, 0xE5, 0x63, 0xA4, 0x40, 0xF2,
|
|
0x77, 0x03, 0x7D, 0x81, 0x2D, 0xEB, 0x33, 0xA0,
|
|
0xF4, 0xA1, 0x39, 0x45, 0xD8, 0x98, 0xC2, 0x96},
|
|
.xg_size = 32U,
|
|
.yg = (uint8_t[]){0x4F, 0xE3, 0x42, 0xE2, 0xFE, 0x1A, 0x7F, 0x9B,
|
|
0x8E, 0xE7, 0xEB, 0x4A, 0x7C, 0x0F, 0x9E, 0x16,
|
|
0x2B, 0xCE, 0x33, 0x57, 0x6B, 0x31, 0x5E, 0xCE,
|
|
0xCB, 0xB6, 0x40, 0x68, 0x37, 0xBF, 0x51, 0xF5},
|
|
.yg_size = 32U,
|
|
},
|
|
#endif
|
|
#if PKA_USE_BRAINPOOL_P256R1
|
|
[PKA_BRAINPOOL_P256R1] = {
|
|
.p_len = 256,
|
|
.n_len = 256,
|
|
.p = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC,
|
|
0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x72,
|
|
0x6E, 0x3B, 0xF6, 0x23, 0xD5, 0x26, 0x20, 0x28,
|
|
0x20, 0x13, 0x48, 0x1D, 0x1F, 0x6E, 0x53, 0x77},
|
|
.n = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC,
|
|
0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x71,
|
|
0x8C, 0x39, 0x7A, 0xA3, 0xB5, 0x61, 0xA6, 0xF7,
|
|
0x90, 0x1E, 0x0E, 0x82, 0x97, 0x48, 0x56, 0xA7},
|
|
.a = (uint8_t[]){0x7D, 0x5A, 0x09, 0x75, 0xFC, 0x2C, 0x30, 0x57,
|
|
0xEE, 0xF6, 0x75, 0x30, 0x41, 0x7A, 0xFF, 0xE7,
|
|
0xFB, 0x80, 0x55, 0xC1, 0x26, 0xDC, 0x5C, 0x6C,
|
|
0xE9, 0x4A, 0x4B, 0x44, 0xF3, 0x30, 0xB5, 0xD9},
|
|
.a_size = 32U,
|
|
.xg = (uint8_t[]){0x8B, 0xD2, 0xAE, 0xB9, 0xCB, 0x7E, 0x57, 0xCB,
|
|
0x2C, 0x4B, 0x48, 0x2F, 0xFC, 0x81, 0xB7, 0xAF,
|
|
0xB9, 0xDE, 0x27, 0xE1, 0xE3, 0xBD, 0x23, 0xC2,
|
|
0x3A, 0x44, 0x53, 0xBD, 0x9A, 0xCE, 0x32, 0x62},
|
|
.xg_size = 32U,
|
|
.yg = (uint8_t[]){0x54, 0x7E, 0xF8, 0x35, 0xC3, 0xDA, 0xC4, 0xFD,
|
|
0x97, 0xF8, 0x46, 0x1A, 0x14, 0x61, 0x1D, 0xC9,
|
|
0xC2, 0x77, 0x45, 0x13, 0x2D, 0xED, 0x8E, 0x54,
|
|
0x5C, 0x1D, 0x54, 0xC7, 0x2F, 0x04, 0x69, 0x97},
|
|
.yg_size = 32U,
|
|
},
|
|
#endif
|
|
#if PKA_USE_BRAINPOOL_P256T1
|
|
[PKA_BRAINPOOL_P256T1] = {
|
|
.p_len = 256,
|
|
.n_len = 256,
|
|
.p = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC,
|
|
0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x72,
|
|
0x6E, 0x3B, 0xF6, 0x23, 0xD5, 0x26, 0x20, 0x28,
|
|
0x20, 0x13, 0x48, 0x1D, 0x1F, 0x6E, 0x53, 0x77},
|
|
.n = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC,
|
|
0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x71,
|
|
0x8C, 0x39, 0x7A, 0xA3, 0xB5, 0x61, 0xA6, 0xF7,
|
|
0x90, 0x1E, 0x0E, 0x82, 0x97, 0x48, 0x56, 0xA7},
|
|
.a = (uint8_t[]){0xA9, 0xFB, 0x57, 0xDB, 0xA1, 0xEE, 0xA9, 0xBC,
|
|
0x3E, 0x66, 0x0A, 0x90, 0x9D, 0x83, 0x8D, 0x72,
|
|
0x6E, 0x3B, 0xF6, 0x23, 0xD5, 0x26, 0x20, 0x28,
|
|
0x20, 0x13, 0x48, 0x1D, 0x1F, 0x6E, 0x53, 0x74},
|
|
.a_size = 32U,
|
|
.xg = (uint8_t[]){0xA3, 0xE8, 0xEB, 0x3C, 0xC1, 0xCF, 0xE7, 0xB7,
|
|
0x73, 0x22, 0x13, 0xB2, 0x3A, 0x65, 0x61, 0x49,
|
|
0xAF, 0xA1, 0x42, 0xC4, 0x7A, 0xAF, 0xBC, 0x2B,
|
|
0x79, 0xA1, 0x91, 0x56, 0x2E, 0x13, 0x05, 0xF4},
|
|
.xg_size = 32U,
|
|
.yg = (uint8_t[]){0x2D, 0x99, 0x6C, 0x82, 0x34, 0x39, 0xC5, 0x6D,
|
|
0x7F, 0x7B, 0x22, 0xE1, 0x46, 0x44, 0x41, 0x7E,
|
|
0x69, 0xBC, 0xB6, 0xDE, 0x39, 0xD0, 0x27, 0x00,
|
|
0x1D, 0xAB, 0xE8, 0xF3, 0x5B, 0x25, 0xC9, 0xBE},
|
|
.yg_size = 32U,
|
|
},
|
|
#endif
|
|
#if PKA_USE_NIST_P521
|
|
[PKA_NIST_P521] = {
|
|
.p_len = 521,
|
|
.n_len = 521,
|
|
.p = (uint8_t[]){ 0x01, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
|
|
.n = (uint8_t[]){ 0x01, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfa,
|
|
0x51, 0x86, 0x87, 0x83, 0xbf, 0x2f, 0x96, 0x6b,
|
|
0x7f, 0xcc, 0x01, 0x48, 0xf7, 0x09, 0xa5, 0xd0,
|
|
0x3b, 0xb5, 0xc9, 0xb8, 0x89, 0x9c, 0x47, 0xae,
|
|
0xbb, 0x6f, 0xb7, 0x1e, 0x91, 0x38, 0x64, 0x09},
|
|
.a_sign = 1,
|
|
.a = (uint8_t[]){0x03},
|
|
.a_size = 1U,
|
|
.xg = (uint8_t[]){ 0xc6,
|
|
0x85, 0x8e, 0x06, 0xb7, 0x04, 0x04, 0xe9, 0xcd,
|
|
0x9e, 0x3e, 0xcb, 0x66, 0x23, 0x95, 0xb4, 0x42,
|
|
0x9c, 0x64, 0x81, 0x39, 0x05, 0x3f, 0xb5, 0x21,
|
|
0xf8, 0x28, 0xaf, 0x60, 0x6b, 0x4d, 0x3d, 0xba,
|
|
0xa1, 0x4b, 0x5e, 0x77, 0xef, 0xe7, 0x59, 0x28,
|
|
0xfe, 0x1d, 0xc1, 0x27, 0xa2, 0xff, 0xa8, 0xde,
|
|
0x33, 0x48, 0xb3, 0xc1, 0x85, 0x6a, 0x42, 0x9b,
|
|
0xf9, 0x7e, 0x7e, 0x31, 0xc2, 0xe5, 0xbd, 0x66},
|
|
.xg_size = 65U,
|
|
.yg = (uint8_t[]){ 0x01, 0x18,
|
|
0x39, 0x29, 0x6a, 0x78, 0x9a, 0x3b, 0xc0, 0x04,
|
|
0x5c, 0x8a, 0x5f, 0xb4, 0x2c, 0x7d, 0x1b, 0xd9,
|
|
0x98, 0xf5, 0x44, 0x49, 0x57, 0x9b, 0x44, 0x68,
|
|
0x17, 0xaf, 0xbd, 0x17, 0x27, 0x3e, 0x66, 0x2c,
|
|
0x97, 0xee, 0x72, 0x99, 0x5e, 0xf4, 0x26, 0x40,
|
|
0xc5, 0x50, 0xb9, 0x01, 0x3f, 0xad, 0x07, 0x61,
|
|
0x35, 0x3c, 0x70, 0x86, 0xa2, 0x72, 0xc2, 0x40,
|
|
0x88, 0xbe, 0x94, 0x76, 0x9f, 0xd1, 0x66, 0x50},
|
|
.yg_size = 66U,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct stm32_pka_platdata pka_pdata;
|
|
|
|
static int stm32_pka_parse_fdt(void)
|
|
{
|
|
int node;
|
|
struct dt_node_info info;
|
|
void *fdt;
|
|
|
|
if (fdt_get_address(&fdt) == 0) {
|
|
return -FDT_ERR_NOTFOUND;
|
|
}
|
|
|
|
node = dt_get_node(&info, -1, DT_PKA_COMPAT);
|
|
if (node < 0) {
|
|
ERROR("No PKA entry in DT\n");
|
|
return -FDT_ERR_NOTFOUND;
|
|
}
|
|
|
|
if (info.status == DT_DISABLED) {
|
|
return -FDT_ERR_NOTFOUND;
|
|
}
|
|
|
|
if ((info.base == 0) || (info.clock < 0) || (info.reset < 0)) {
|
|
return -FDT_ERR_BADVALUE;
|
|
}
|
|
|
|
pka_pdata.base = (uintptr_t)info.base;
|
|
pka_pdata.clock_id = (unsigned long)info.clock;
|
|
pka_pdata.reset_id = (unsigned int)info.reset;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pka_wait_bit(uintptr_t base, uint32_t bit)
|
|
{
|
|
uint64_t timeout = timeout_init_us(PKA_TIMEOUT_US);
|
|
|
|
while ((mmio_read_32(base + _PKA_SR) & bit) != bit) {
|
|
if (timeout_elapsed(timeout)) {
|
|
WARN("timeout waiting %x\n", bit);
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static void pka_disable(uintptr_t base)
|
|
{
|
|
mmio_clrbits_32(base + _PKA_CR, _PKA_CR_EN);
|
|
}
|
|
|
|
static int pka_enable(uintptr_t base, uint32_t mode)
|
|
{
|
|
/* Set mode and disable interrupts */
|
|
mmio_clrsetbits_32(base + _PKA_CR, _PKA_IT_MASK | _PKA_CR_MODE_MASK,
|
|
_PKA_CR_MODE_MASK & (mode << _PKA_CR_MODE_SHIFT));
|
|
|
|
mmio_setbits_32(base + _PKA_CR, _PKA_CR_EN);
|
|
|
|
return pka_wait_bit(base, _PKA_SR_INITOK);
|
|
}
|
|
|
|
/*
|
|
* Data are already loaded in PKA internal RAM
|
|
* MODE is set
|
|
* We start process, and wait for its end.
|
|
*/
|
|
static int stm32_pka_process(uintptr_t base)
|
|
{
|
|
mmio_setbits_32(base + _PKA_CR, _PKA_CR_START);
|
|
|
|
return pka_wait_bit(base, _PKA_IT_PROCEND);
|
|
}
|
|
|
|
/**
|
|
* @brief Write ECC operand to PKA RAM.
|
|
* @note PKA expect to write u64 word, each u64 are: the least significant bit is
|
|
* bit 0; the most significant bit is bit 63.
|
|
* We write eo_nbw (ECC operand Size) u64, value that depends of the chosen
|
|
* prime modulus length in bits.
|
|
* First less signicant u64 is written to low address
|
|
* Most significant u64 to higher address.
|
|
* And at last address we write a u64(0x0)
|
|
* @note This function doesn't only manage endianness (as bswap64 do), but also
|
|
* complete most significant incomplete u64 with 0 (if data is not a u64
|
|
* multiple), and fill u64 last address with 0.
|
|
* @param addr: PKA_RAM address to write the buffer 'data'
|
|
* @param data: is a BYTE list with most significant bytes first
|
|
* @param data_size: nb of byte in data
|
|
* @param eo_nbw: is ECC Operand size in 64bits word (including the extra 0)
|
|
* (note it depends of the prime modulus length, not the data size)
|
|
* @retval 0 if OK.
|
|
* -EINVAL if data_size and eo_nbw are inconsistent, ie data doesn't
|
|
* fit in defined eo_nbw, or eo_nbw bigger than hardware limit.
|
|
*/
|
|
static int write_eo_data(uintptr_t addr, uint8_t *data, unsigned int data_size,
|
|
unsigned int eo_nbw)
|
|
{
|
|
uint32_t word_index;
|
|
int data_index;
|
|
|
|
if ((eo_nbw < OP_NBW_FROM_SIZE(data_size)) || (eo_nbw > MAX_EO_NBW)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Fill value */
|
|
data_index = (int)data_size - 1;
|
|
for (word_index = 0U; word_index < eo_nbw; word_index++) {
|
|
uint64_t tmp = 0ULL;
|
|
unsigned int i = 0U; /* index in the tmp U64 word */
|
|
|
|
/* Stop if end of tmp or end of data */
|
|
while ((i < sizeof(tmp)) && (data_index >= 0)) {
|
|
tmp |= (uint64_t)(data[data_index]) << (UINT8_LEN * i);
|
|
i++; /* Move byte index in current (u64)tmp */
|
|
data_index--; /* Move to just next most significat byte */
|
|
}
|
|
|
|
mmio_write_64(addr + word_index * sizeof(tmp), tmp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int get_ecc_op_nbword(enum stm32_pka_ecdsa_curve_id cid)
|
|
{
|
|
if (cid >= ARRAY_SIZE(curve_def)) {
|
|
ERROR("CID %u is out of boundaries\n", cid);
|
|
panic();
|
|
}
|
|
|
|
return OP_NBW_FROM_LEN(curve_def[cid].n_len);
|
|
}
|
|
|
|
static int stm32_pka_ecdsa_verif_configure_curve(uintptr_t base, enum stm32_pka_ecdsa_curve_id cid)
|
|
{
|
|
int ret;
|
|
unsigned int eo_nbw = get_ecc_op_nbword(cid);
|
|
|
|
mmio_write_64(base + _PKA_RAM_N_LEN, curve_def[cid].n_len);
|
|
mmio_write_64(base + _PKA_RAM_P_LEN, curve_def[cid].p_len);
|
|
mmio_write_64(base + _PKA_RAM_A_SIGN, curve_def[cid].a_sign);
|
|
|
|
ret = write_eo_data(base + _PKA_RAM_A, curve_def[cid].a, curve_def[cid].a_size, eo_nbw);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = write_eo_data(base + _PKA_RAM_PRIME_N,
|
|
curve_def[cid].n, div_round_up(curve_def[cid].n_len, UINT8_LEN),
|
|
eo_nbw);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = write_eo_data(base + _PKA_RAM_P, curve_def[cid].p,
|
|
div_round_up(curve_def[cid].p_len, UINT8_LEN), eo_nbw);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = write_eo_data(base + _PKA_RAM_XG, curve_def[cid].xg, curve_def[cid].xg_size, eo_nbw);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
ret = write_eo_data(base + _PKA_RAM_YG, curve_def[cid].yg, curve_def[cid].yg_size, eo_nbw);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_pka_ecdsa_verif_check_return(uintptr_t base)
|
|
{
|
|
uint64_t value;
|
|
uint32_t sr;
|
|
|
|
sr = mmio_read_32(base + _PKA_SR);
|
|
if ((sr & (_PKA_IT_OPERR | _PKA_IT_ADDRERR | _PKA_IT_RAMERR)) != 0) {
|
|
WARN("Detected error(s): %s%s%s\n",
|
|
(sr & _PKA_IT_OPERR) ? "Operation " : "",
|
|
(sr & _PKA_IT_ADDRERR) ? "Address " : "",
|
|
(sr & _PKA_IT_RAMERR) ? "RAM" : "");
|
|
return -EINVAL;
|
|
}
|
|
|
|
value = mmio_read_64(base + _PKA_RAM_ECDSA_VERIFY);
|
|
if (value == _PKA_RAM_ECDSA_VERIFY_VALID) {
|
|
return 0;
|
|
}
|
|
|
|
if (value == _PKA_RAM_ECDSA_VERIFY_INVALID) {
|
|
return -EAUTH;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* @brief Check if BigInt stored in data is 0
|
|
*
|
|
* @param data: a BYTE array with most significant bytes first
|
|
* @param size: data size
|
|
*
|
|
* @retval: true: if data represents a 0 value (ie all bytes == 0)
|
|
* false: if data represents a non-zero value.
|
|
*/
|
|
static bool is_zero(uint8_t *data, unsigned int size)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0U; i < size; i++) {
|
|
if (data[i] != 0U) {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* @brief Compare two BigInt:
|
|
* @param xdata_a: a BYTE array with most significant bytes first
|
|
* @param size_a: nb of Byte of 'a'
|
|
* @param data_b: a BYTE array with most significant bytes first
|
|
* @param size_b: nb of Byte of 'b'
|
|
*
|
|
* @retval: true if data_a < data_b
|
|
* false if data_a >= data_b
|
|
*/
|
|
static bool is_smaller(uint8_t *data_a, unsigned int size_a,
|
|
uint8_t *data_b, unsigned int size_b)
|
|
{
|
|
unsigned int i;
|
|
|
|
i = MAX(size_a, size_b) + 1U;
|
|
do {
|
|
uint8_t a, b;
|
|
|
|
i--;
|
|
if (size_a < i) {
|
|
a = 0U;
|
|
} else {
|
|
a = data_a[size_a - i];
|
|
}
|
|
|
|
if (size_b < i) {
|
|
b = 0U;
|
|
} else {
|
|
b = data_b[size_b - i];
|
|
}
|
|
|
|
if (a < b) {
|
|
return true;
|
|
}
|
|
|
|
if (a > b) {
|
|
return false;
|
|
}
|
|
} while (i != 0U);
|
|
|
|
return false;
|
|
}
|
|
|
|
static int stm32_pka_ecdsa_check_param(void *sig_r_ptr, unsigned int sig_r_size,
|
|
void *sig_s_ptr, unsigned int sig_s_size,
|
|
void *pk_x_ptr, unsigned int pk_x_size,
|
|
void *pk_y_ptr, unsigned int pk_y_size,
|
|
enum stm32_pka_ecdsa_curve_id cid)
|
|
{
|
|
/* Public Key check */
|
|
/* Check Xq < p */
|
|
if (!is_smaller(pk_x_ptr, pk_x_size,
|
|
curve_def[cid].p, div_round_up(curve_def[cid].p_len, UINT8_LEN))) {
|
|
WARN("%s Xq < p inval\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check Yq < p */
|
|
if (!is_smaller(pk_y_ptr, pk_y_size,
|
|
curve_def[cid].p, div_round_up(curve_def[cid].p_len, UINT8_LEN))) {
|
|
WARN("%s Yq < p inval\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Signature check */
|
|
/* Check 0 < r < n */
|
|
if (!is_smaller(sig_r_ptr, sig_r_size,
|
|
curve_def[cid].n, div_round_up(curve_def[cid].n_len, UINT8_LEN)) &&
|
|
!is_zero(sig_r_ptr, sig_r_size)) {
|
|
WARN("%s 0< r < n inval\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check 0 < s < n */
|
|
if (!is_smaller(sig_s_ptr, sig_s_size,
|
|
curve_def[cid].n, div_round_up(curve_def[cid].n_len, UINT8_LEN)) &&
|
|
!is_zero(sig_s_ptr, sig_s_size)) {
|
|
WARN("%s 0< s < n inval\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* @brief Initialize the PKA driver.
|
|
* @param None.
|
|
* @retval 0 if OK, negative value else.
|
|
*/
|
|
int stm32_pka_init(void)
|
|
{
|
|
int err;
|
|
#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
|
|
uint32_t ver;
|
|
uint32_t id;
|
|
#endif
|
|
|
|
err = stm32_pka_parse_fdt();
|
|
if (err != 0) {
|
|
return err;
|
|
}
|
|
|
|
clk_enable(pka_pdata.clock_id);
|
|
|
|
if (stm32mp_reset_assert((unsigned long)pka_pdata.reset_id, TIMEOUT_US_1MS) != 0) {
|
|
panic();
|
|
}
|
|
|
|
udelay(PKA_RESET_DELAY);
|
|
if (stm32mp_reset_deassert((unsigned long)pka_pdata.reset_id, TIMEOUT_US_1MS) != 0) {
|
|
panic();
|
|
}
|
|
|
|
#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
|
|
id = mmio_read_32(pka_pdata.base + _PKA_IPIDR);
|
|
ver = mmio_read_32(pka_pdata.base + _PKA_VERR);
|
|
|
|
VERBOSE("STM32 PKA[%x] V%u.%u\n", id,
|
|
(ver & _PKA_VERR_MAJREV_MASK) >> _PKA_VERR_MAJREV_SHIFT,
|
|
(ver & _PKA_VERR_MINREV_MASK) >> _PKA_VERR_MINREV_SHIFT);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int stm32_pka_ecdsa_verif(void *hash, unsigned int hash_size,
|
|
void *sig_r_ptr, unsigned int sig_r_size,
|
|
void *sig_s_ptr, unsigned int sig_s_size,
|
|
void *pk_x_ptr, unsigned int pk_x_size,
|
|
void *pk_y_ptr, unsigned int pk_y_size,
|
|
enum stm32_pka_ecdsa_curve_id cid)
|
|
{
|
|
int ret;
|
|
uintptr_t base = pka_pdata.base;
|
|
unsigned int eo_nbw = get_ecc_op_nbword(cid);
|
|
|
|
if ((hash == NULL) || (sig_r_ptr == NULL) || (sig_s_ptr == NULL) ||
|
|
(pk_x_ptr == NULL) || (pk_y_ptr == NULL)) {
|
|
INFO("%s invalid input param\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = stm32_pka_ecdsa_check_param(sig_r_ptr, sig_r_size,
|
|
sig_s_ptr, sig_s_size,
|
|
pk_x_ptr, pk_x_size,
|
|
pk_y_ptr, pk_y_size,
|
|
cid);
|
|
if (ret < 0) {
|
|
INFO("%s check param error %d\n", __func__, ret);
|
|
goto out;
|
|
}
|
|
|
|
if ((mmio_read_32(base + _PKA_SR) & _PKA_SR_BUSY) == _PKA_SR_BUSY) {
|
|
INFO("%s busy\n", __func__);
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
/* Fill PKA RAM */
|
|
/* With curve id values */
|
|
ret = stm32_pka_ecdsa_verif_configure_curve(base, cid);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
/* With pubkey */
|
|
ret = write_eo_data(base + _PKA_RAM_XQ, pk_x_ptr, pk_x_size, eo_nbw);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
ret = write_eo_data(base + _PKA_RAM_YQ, pk_y_ptr, pk_y_size, eo_nbw);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
/* With hash */
|
|
ret = write_eo_data(base + _PKA_RAM_HASH_Z, hash, hash_size, eo_nbw);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
/* With signature */
|
|
ret = write_eo_data(base + _PKA_RAM_SIGN_R, sig_r_ptr, sig_r_size, eo_nbw);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
ret = write_eo_data(base + _PKA_RAM_SIGN_S, sig_s_ptr, sig_s_size, eo_nbw);
|
|
if (ret < 0) {
|
|
goto out;
|
|
}
|
|
|
|
/* Set mode to ecdsa signature verification */
|
|
ret = pka_enable(base, _PKA_CR_MODE_ECDSA_VERIF);
|
|
if (ret < 0) {
|
|
WARN("%s set mode pka error %d\n", __func__, ret);
|
|
goto out;
|
|
}
|
|
|
|
/* Start processing and wait end */
|
|
ret = stm32_pka_process(base);
|
|
if (ret < 0) {
|
|
WARN("%s process error %d\n", __func__, ret);
|
|
goto out;
|
|
}
|
|
|
|
/* Check return status */
|
|
ret = stm32_pka_ecdsa_verif_check_return(base);
|
|
|
|
/* Unset end proc */
|
|
mmio_setbits_32(base + _PKA_CLRFR, _PKA_IT_PROCEND);
|
|
|
|
out:
|
|
/* Disable PKA (will stop all pending process and reset RAM) */
|
|
pka_disable(base);
|
|
|
|
return ret;
|
|
}
|