mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-16 01:24:27 +00:00
072d7532d2
Rename driver file to BSEC2. Split header file in IP and feature parts. Add functions to access BSEC scratch register. Several corrections and improvements. Probe the driver earlier, especially to check debug features. Change-Id: I1981536398d598d67a19d2d7766dacc18de72ec1 Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Yann Gautier <yann.gautier@st.com>
421 lines
12 KiB
Makefile
421 lines
12 KiB
Makefile
#
|
|
# Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
|
|
#
|
|
# SPDX-License-Identifier: BSD-3-Clause
|
|
#
|
|
|
|
ARM_CORTEX_A7 := yes
|
|
ARM_WITH_NEON := yes
|
|
BL2_AT_EL3 := 1
|
|
USE_COHERENT_MEM := 0
|
|
|
|
# Allow TF-A to concatenate BL2 & BL32 binaries in a single file,
|
|
# share DTB file between BL2 and BL32
|
|
# If it is set to 0, then FIP is used
|
|
STM32MP_USE_STM32IMAGE ?= 0
|
|
|
|
ifneq ($(STM32MP_USE_STM32IMAGE),1)
|
|
ENABLE_PIE := 1
|
|
BL2_IN_XIP_MEM := 1
|
|
endif
|
|
|
|
STM32_TF_VERSION ?= 0
|
|
|
|
# Enable dynamic memory mapping
|
|
PLAT_XLAT_TABLES_DYNAMIC := 1
|
|
|
|
# DDR controller with dual AXI port and 32-bit interface
|
|
STM32MP_DDR_DUAL_AXI_PORT:= 1
|
|
STM32MP_DDR_32BIT_INTERFACE:= 1
|
|
|
|
ifeq ($(AARCH32_SP),sp_min)
|
|
# Disable Neon support: sp_min runtime may conflict with non-secure world
|
|
TF_CFLAGS += -mfloat-abi=soft
|
|
endif
|
|
|
|
TF_CFLAGS += -Wsign-compare
|
|
|
|
# Not needed for Cortex-A7
|
|
WORKAROUND_CVE_2017_5715:= 0
|
|
|
|
ifeq (${PSA_FWU_SUPPORT},1)
|
|
ifneq (${STM32MP_USE_STM32IMAGE},1)
|
|
# Number of banks of updatable firmware
|
|
NR_OF_FW_BANKS := 2
|
|
NR_OF_IMAGES_IN_FW_BANK := 1
|
|
|
|
# Number of TF-A copies in the device
|
|
STM32_TF_A_COPIES := 2
|
|
STM32_BL33_PARTS_NUM := 2
|
|
STM32_RUNTIME_PARTS_NUM := 4
|
|
else
|
|
$(error FWU Feature enabled only with FIP images)
|
|
endif
|
|
else
|
|
# Number of TF-A copies in the device
|
|
STM32_TF_A_COPIES := 2
|
|
STM32_BL33_PARTS_NUM := 1
|
|
ifeq ($(AARCH32_SP),optee)
|
|
STM32_RUNTIME_PARTS_NUM := 3
|
|
else ifeq ($(STM32MP_USE_STM32IMAGE),1)
|
|
STM32_RUNTIME_PARTS_NUM := 0
|
|
else
|
|
STM32_RUNTIME_PARTS_NUM := 1
|
|
endif
|
|
endif
|
|
PLAT_PARTITION_MAX_ENTRIES := $(shell echo $$(($(STM32_TF_A_COPIES) + \
|
|
$(STM32_BL33_PARTS_NUM) + \
|
|
$(STM32_RUNTIME_PARTS_NUM))))
|
|
|
|
# Boot devices
|
|
STM32MP_EMMC ?= 0
|
|
STM32MP_SDMMC ?= 0
|
|
STM32MP_RAW_NAND ?= 0
|
|
STM32MP_SPI_NAND ?= 0
|
|
STM32MP_SPI_NOR ?= 0
|
|
STM32MP_EMMC_BOOT ?= 0
|
|
|
|
# Serial boot devices
|
|
STM32MP_USB_PROGRAMMER ?= 0
|
|
STM32MP_UART_PROGRAMMER ?= 0
|
|
|
|
# Device tree
|
|
DTB_FILE_NAME ?= stm32mp157c-ev1.dtb
|
|
ifeq ($(STM32MP_USE_STM32IMAGE),1)
|
|
ifeq ($(AARCH32_SP),optee)
|
|
BL2_DTSI := stm32mp15-bl2.dtsi
|
|
FDT_SOURCES := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl2.dts,$(DTB_FILE_NAME)))
|
|
else
|
|
FDT_SOURCES := $(addprefix fdts/, $(patsubst %.dtb,%.dts,$(DTB_FILE_NAME)))
|
|
endif
|
|
else
|
|
BL2_DTSI := stm32mp15-bl2.dtsi
|
|
FDT_SOURCES := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl2.dts,$(DTB_FILE_NAME)))
|
|
ifeq ($(AARCH32_SP),sp_min)
|
|
BL32_DTSI := stm32mp15-bl32.dtsi
|
|
FDT_SOURCES += $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl32.dts,$(DTB_FILE_NAME)))
|
|
endif
|
|
endif
|
|
DTC_CPPFLAGS += ${INCLUDES}
|
|
DTC_FLAGS += -Wno-unit_address_vs_reg
|
|
|
|
# Macros and rules to build TF binary
|
|
STM32_TF_ELF_LDFLAGS := --hash-style=gnu --as-needed
|
|
STM32_TF_STM32 := $(addprefix ${BUILD_PLAT}/tf-a-, $(patsubst %.dtb,%.stm32,$(DTB_FILE_NAME)))
|
|
STM32_TF_LINKERFILE := ${BUILD_PLAT}/stm32mp1.ld
|
|
|
|
ASFLAGS += -DBL2_BIN_PATH=\"${BUILD_PLAT}/bl2.bin\"
|
|
ifeq ($(AARCH32_SP),sp_min)
|
|
# BL32 is built only if using SP_MIN
|
|
BL32_DEP := bl32
|
|
ASFLAGS += -DBL32_BIN_PATH=\"${BUILD_PLAT}/bl32.bin\"
|
|
endif
|
|
|
|
# Variables for use with stm32image
|
|
STM32IMAGEPATH ?= tools/stm32image
|
|
STM32IMAGE ?= ${STM32IMAGEPATH}/stm32image${BIN_EXT}
|
|
STM32IMAGE_SRC := ${STM32IMAGEPATH}/stm32image.c
|
|
|
|
ifneq (${STM32MP_USE_STM32IMAGE},1)
|
|
FIP_DEPS += dtbs
|
|
STM32MP_HW_CONFIG := ${BL33_CFG}
|
|
STM32MP_FW_CONFIG_NAME := $(patsubst %.dtb,%-fw-config.dtb,$(DTB_FILE_NAME))
|
|
STM32MP_FW_CONFIG := ${BUILD_PLAT}/fdts/$(STM32MP_FW_CONFIG_NAME)
|
|
ifneq (${AARCH32_SP},none)
|
|
FDT_SOURCES += $(addprefix fdts/, $(patsubst %.dtb,%.dts,$(STM32MP_FW_CONFIG_NAME)))
|
|
endif
|
|
# Add the FW_CONFIG to FIP and specify the same to certtool
|
|
$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_FW_CONFIG},--fw-config))
|
|
# Add the HW_CONFIG to FIP and specify the same to certtool
|
|
$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_HW_CONFIG},--hw-config))
|
|
ifeq ($(AARCH32_SP),sp_min)
|
|
STM32MP_TOS_FW_CONFIG := $(addprefix ${BUILD_PLAT}/fdts/, $(patsubst %.dtb,%-bl32.dtb,$(DTB_FILE_NAME)))
|
|
$(eval $(call TOOL_ADD_PAYLOAD,${STM32MP_TOS_FW_CONFIG},--tos-fw-config))
|
|
else
|
|
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
|
|
# in the FIP if the platform requires.
|
|
ifneq ($(BL32_EXTRA1),)
|
|
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
|
|
endif
|
|
ifneq ($(BL32_EXTRA2),)
|
|
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
# Enable flags for C files
|
|
$(eval $(call assert_booleans,\
|
|
$(sort \
|
|
PLAT_XLAT_TABLES_DYNAMIC \
|
|
STM32MP_DDR_32BIT_INTERFACE \
|
|
STM32MP_DDR_DUAL_AXI_PORT \
|
|
STM32MP_EMMC \
|
|
STM32MP_EMMC_BOOT \
|
|
STM32MP_RAW_NAND \
|
|
STM32MP_SDMMC \
|
|
STM32MP_SPI_NAND \
|
|
STM32MP_SPI_NOR \
|
|
STM32MP_UART_PROGRAMMER \
|
|
STM32MP_USB_PROGRAMMER \
|
|
STM32MP_USE_STM32IMAGE \
|
|
)))
|
|
|
|
$(eval $(call assert_numerics,\
|
|
$(sort \
|
|
PLAT_PARTITION_MAX_ENTRIES \
|
|
STM32_TF_A_COPIES \
|
|
STM32_TF_VERSION \
|
|
)))
|
|
|
|
$(eval $(call add_defines,\
|
|
$(sort \
|
|
PLAT_PARTITION_MAX_ENTRIES \
|
|
PLAT_XLAT_TABLES_DYNAMIC \
|
|
STM32_TF_A_COPIES \
|
|
STM32_TF_VERSION \
|
|
STM32MP_DDR_32BIT_INTERFACE \
|
|
STM32MP_DDR_DUAL_AXI_PORT \
|
|
STM32MP_EMMC \
|
|
STM32MP_EMMC_BOOT \
|
|
STM32MP_RAW_NAND \
|
|
STM32MP_SDMMC \
|
|
STM32MP_SPI_NAND \
|
|
STM32MP_SPI_NOR \
|
|
STM32MP_UART_PROGRAMMER \
|
|
STM32MP_USB_PROGRAMMER \
|
|
STM32MP_USE_STM32IMAGE \
|
|
)))
|
|
|
|
# Include paths and source files
|
|
PLAT_INCLUDES := -Iplat/st/common/include/
|
|
PLAT_INCLUDES += -Iplat/st/stm32mp1/include/
|
|
|
|
ifeq (${STM32MP_USE_STM32IMAGE},1)
|
|
include common/fdt_wrappers.mk
|
|
else
|
|
include lib/fconf/fconf.mk
|
|
endif
|
|
include lib/libfdt/libfdt.mk
|
|
|
|
PLAT_BL_COMMON_SOURCES := common/uuid.c \
|
|
plat/st/common/stm32mp_common.c \
|
|
plat/st/stm32mp1/stm32mp1_private.c
|
|
|
|
PLAT_BL_COMMON_SOURCES += drivers/st/uart/aarch32/stm32_console.S
|
|
|
|
ifneq (${ENABLE_STACK_PROTECTOR},0)
|
|
PLAT_BL_COMMON_SOURCES += plat/st/stm32mp1/stm32mp1_stack_protector.c
|
|
endif
|
|
|
|
include lib/xlat_tables_v2/xlat_tables.mk
|
|
PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
|
|
|
|
PLAT_BL_COMMON_SOURCES += lib/cpus/aarch32/cortex_a7.S
|
|
|
|
PLAT_BL_COMMON_SOURCES += drivers/arm/tzc/tzc400.c \
|
|
drivers/clk/clk.c \
|
|
drivers/delay_timer/delay_timer.c \
|
|
drivers/delay_timer/generic_delay_timer.c \
|
|
drivers/st/bsec/bsec2.c \
|
|
drivers/st/clk/stm32mp_clkfunc.c \
|
|
drivers/st/clk/stm32mp1_clk.c \
|
|
drivers/st/ddr/stm32mp_ddr.c \
|
|
drivers/st/ddr/stm32mp1_ddr_helpers.c \
|
|
drivers/st/gpio/stm32_gpio.c \
|
|
drivers/st/i2c/stm32_i2c.c \
|
|
drivers/st/iwdg/stm32_iwdg.c \
|
|
drivers/st/pmic/stm32mp_pmic.c \
|
|
drivers/st/pmic/stpmic1.c \
|
|
drivers/st/regulator/regulator_core.c \
|
|
drivers/st/regulator/regulator_fixed.c \
|
|
drivers/st/reset/stm32mp1_reset.c \
|
|
plat/st/common/stm32mp_dt.c \
|
|
plat/st/stm32mp1/stm32mp1_dbgmcu.c \
|
|
plat/st/stm32mp1/stm32mp1_helper.S \
|
|
plat/st/stm32mp1/stm32mp1_syscfg.c
|
|
|
|
ifneq (${STM32MP_USE_STM32IMAGE},1)
|
|
BL2_SOURCES += ${FCONF_SOURCES} ${FCONF_DYN_SOURCES}
|
|
|
|
BL2_SOURCES += drivers/io/io_fip.c \
|
|
plat/st/common/bl2_io_storage.c \
|
|
plat/st/common/stm32mp_fconf_io.c \
|
|
plat/st/stm32mp1/plat_bl2_mem_params_desc.c \
|
|
plat/st/stm32mp1/stm32mp1_fconf_firewall.c
|
|
else
|
|
BL2_SOURCES += ${FDT_WRAPPERS_SOURCES}
|
|
|
|
BL2_SOURCES += drivers/io/io_dummy.c \
|
|
drivers/st/io/io_stm32image.c \
|
|
plat/st/common/bl2_stm32_io_storage.c \
|
|
plat/st/stm32mp1/plat_bl2_stm32_mem_params_desc.c \
|
|
plat/st/stm32mp1/stm32mp1_security.c
|
|
endif
|
|
|
|
ifeq (${PSA_FWU_SUPPORT},1)
|
|
include lib/zlib/zlib.mk
|
|
include drivers/fwu/fwu.mk
|
|
|
|
BL2_SOURCES += $(ZLIB_SOURCES)
|
|
endif
|
|
|
|
BL2_SOURCES += drivers/io/io_block.c \
|
|
drivers/io/io_mtd.c \
|
|
drivers/io/io_storage.c \
|
|
drivers/st/crypto/stm32_hash.c \
|
|
plat/st/common/stm32mp_auth.c \
|
|
plat/st/stm32mp1/bl2_plat_setup.c
|
|
|
|
ifneq ($(filter 1,${STM32MP_EMMC} ${STM32MP_SDMMC}),)
|
|
BL2_SOURCES += drivers/mmc/mmc.c \
|
|
drivers/partition/gpt.c \
|
|
drivers/partition/partition.c \
|
|
drivers/st/io/io_mmc.c \
|
|
drivers/st/mmc/stm32_sdmmc2.c
|
|
endif
|
|
|
|
ifeq (${STM32MP_RAW_NAND},1)
|
|
$(eval $(call add_define_val,NAND_ONFI_DETECT,1))
|
|
BL2_SOURCES += drivers/mtd/nand/raw_nand.c \
|
|
drivers/st/fmc/stm32_fmc2_nand.c
|
|
endif
|
|
|
|
ifeq (${STM32MP_SPI_NAND},1)
|
|
BL2_SOURCES += drivers/mtd/nand/spi_nand.c
|
|
endif
|
|
|
|
ifeq (${STM32MP_SPI_NOR},1)
|
|
BL2_SOURCES += drivers/mtd/nor/spi_nor.c
|
|
endif
|
|
|
|
ifneq ($(filter 1,${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
|
|
BL2_SOURCES += drivers/mtd/spi-mem/spi_mem.c \
|
|
drivers/st/spi/stm32_qspi.c
|
|
endif
|
|
|
|
ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND}),)
|
|
BL2_SOURCES += drivers/mtd/nand/core.c
|
|
endif
|
|
|
|
ifneq ($(filter 1,${STM32MP_RAW_NAND} ${STM32MP_SPI_NAND} ${STM32MP_SPI_NOR}),)
|
|
BL2_SOURCES += plat/st/stm32mp1/stm32mp1_boot_device.c
|
|
endif
|
|
|
|
ifneq ($(filter 1,${STM32MP_UART_PROGRAMMER} ${STM32MP_USB_PROGRAMMER}),)
|
|
BL2_SOURCES += drivers/io/io_memmap.c
|
|
endif
|
|
|
|
ifeq (${STM32MP_UART_PROGRAMMER},1)
|
|
BL2_SOURCES += drivers/st/uart/stm32_uart.c \
|
|
plat/st/common/stm32cubeprogrammer_uart.c
|
|
endif
|
|
|
|
ifeq (${STM32MP_USB_PROGRAMMER},1)
|
|
#The DFU stack uses only one end point, reduce the USB stack footprint
|
|
$(eval $(call add_define_val,CONFIG_USBD_EP_NB,1U))
|
|
BL2_SOURCES += drivers/st/usb/stm32mp1_usb.c \
|
|
drivers/usb/usb_device.c \
|
|
plat/st/common/stm32cubeprogrammer_usb.c \
|
|
plat/st/common/usb_dfu.c \
|
|
plat/st/stm32mp1/stm32mp1_usb_dfu.c
|
|
endif
|
|
|
|
BL2_SOURCES += drivers/st/ddr/stm32mp_ddr_test.c \
|
|
drivers/st/ddr/stm32mp_ram.c \
|
|
drivers/st/ddr/stm32mp1_ddr.c \
|
|
drivers/st/ddr/stm32mp1_ram.c
|
|
|
|
BL2_SOURCES += common/desc_image_load.c \
|
|
plat/st/stm32mp1/plat_image_load.c
|
|
|
|
BL2_SOURCES += lib/optee/optee_utils.c
|
|
|
|
# Compilation rules
|
|
.PHONY: check_dtc_version stm32image clean_stm32image check_boot_device
|
|
.SUFFIXES:
|
|
|
|
all: check_dtc_version stm32image ${STM32_TF_STM32}
|
|
|
|
distclean realclean clean: clean_stm32image
|
|
|
|
bl2: check_boot_device
|
|
|
|
check_boot_device:
|
|
@if [ ${STM32MP_EMMC} != 1 ] && \
|
|
[ ${STM32MP_SDMMC} != 1 ] && \
|
|
[ ${STM32MP_RAW_NAND} != 1 ] && \
|
|
[ ${STM32MP_SPI_NAND} != 1 ] && \
|
|
[ ${STM32MP_SPI_NOR} != 1 ] && \
|
|
[ ${STM32MP_UART_PROGRAMMER} != 1 ] && \
|
|
[ ${STM32MP_USB_PROGRAMMER} != 1 ]; then \
|
|
echo "No boot device driver is enabled"; \
|
|
false; \
|
|
fi
|
|
|
|
stm32image: ${STM32IMAGE}
|
|
|
|
${STM32IMAGE}: ${STM32IMAGE_SRC}
|
|
${Q}${MAKE} CPPFLAGS="" --no-print-directory -C ${STM32IMAGEPATH}
|
|
|
|
clean_stm32image:
|
|
${Q}${MAKE} --no-print-directory -C ${STM32IMAGEPATH} clean
|
|
|
|
check_dtc_version:
|
|
$(eval DTC_V = $(shell $(DTC) -v | awk '{print $$NF}'))
|
|
$(eval DTC_VERSION = $(shell printf "%d" $(shell echo ${DTC_V} | cut -d- -f1 | sed "s/\./0/g")))
|
|
@if [ ${DTC_VERSION} -lt 10404 ]; then \
|
|
echo "dtc version too old (${DTC_V}), you need at least version 1.4.4"; \
|
|
false; \
|
|
fi
|
|
|
|
ifeq ($(STM32MP_USE_STM32IMAGE)-$(AARCH32_SP),1-sp_min)
|
|
${BUILD_PLAT}/stm32mp1-%.o: ${BUILD_PLAT}/fdts/%.dtb plat/st/stm32mp1/stm32mp1.S bl2 ${BL32_DEP}
|
|
@echo " AS stm32mp1.S"
|
|
${Q}${AS} ${ASFLAGS} ${TF_CFLAGS} \
|
|
-DDTB_BIN_PATH=\"$<\" \
|
|
-c $(word 2,$^) -o $@
|
|
else
|
|
# Create DTB file for BL2
|
|
${BUILD_PLAT}/fdts/%-bl2.dts: fdts/%.dts fdts/${BL2_DTSI} | ${BUILD_PLAT} fdt_dirs
|
|
@echo '#include "$(patsubst fdts/%,%,$<)"' > $@
|
|
@echo '#include "${BL2_DTSI}"' >> $@
|
|
|
|
${BUILD_PLAT}/fdts/%-bl2.dtb: ${BUILD_PLAT}/fdts/%-bl2.dts
|
|
|
|
ifeq ($(AARCH32_SP),sp_min)
|
|
# Create DTB file for BL32
|
|
${BUILD_PLAT}/fdts/%-bl32.dts: fdts/%.dts fdts/${BL32_DTSI} | ${BUILD_PLAT} fdt_dirs
|
|
@echo '#include "$(patsubst fdts/%,%,$<)"' > $@
|
|
@echo '#include "${BL32_DTSI}"' >> $@
|
|
|
|
${BUILD_PLAT}/fdts/%-bl32.dtb: ${BUILD_PLAT}/fdts/%-bl32.dts
|
|
endif
|
|
|
|
${BUILD_PLAT}/stm32mp1-%.o: ${BUILD_PLAT}/fdts/%-bl2.dtb plat/st/stm32mp1/stm32mp1.S bl2
|
|
@echo " AS stm32mp1.S"
|
|
${Q}${AS} ${ASFLAGS} ${TF_CFLAGS} \
|
|
-DDTB_BIN_PATH=\"$<\" \
|
|
-c plat/st/stm32mp1/stm32mp1.S -o $@
|
|
endif
|
|
|
|
$(eval $(call MAKE_LD,${STM32_TF_LINKERFILE},plat/st/stm32mp1/stm32mp1.ld.S,bl2))
|
|
|
|
tf-a-%.elf: stm32mp1-%.o ${STM32_TF_LINKERFILE}
|
|
@echo " LDS $<"
|
|
${Q}${LD} -o $@ ${STM32_TF_ELF_LDFLAGS} -Map=$(@:.elf=.map) --script ${STM32_TF_LINKERFILE} $<
|
|
|
|
tf-a-%.bin: tf-a-%.elf
|
|
${Q}${OC} -O binary $< $@
|
|
@echo
|
|
@echo "Built $@ successfully"
|
|
@echo
|
|
|
|
tf-a-%.stm32: ${STM32IMAGE} tf-a-%.bin
|
|
@echo
|
|
@echo "Generate $@"
|
|
$(eval LOADADDR = $(shell cat $(@:.stm32=.map) | grep RAM | awk '{print $$2}'))
|
|
$(eval ENTRY = $(shell cat $(@:.stm32=.map) | grep "__BL2_IMAGE_START" | awk '{print $$1}'))
|
|
${Q}${STM32IMAGE} -s $(word 2,$^) -d $@ \
|
|
-l $(LOADADDR) -e ${ENTRY} \
|
|
-v ${STM32_TF_VERSION}
|
|
@echo
|