mirror of
https://github.com/ARM-software/arm-trusted-firmware.git
synced 2025-04-29 16:48:59 +00:00
6ec0c65b09
This renames tc0 platform folder and files to tc, and introduces TARGET_PLATFORM variable to account for the differences between TC0 and TC1. Signed-off-by: Usama Arif <usama.arif@arm.com> Change-Id: I5b4a83f3453afd12542267091b3edab4c139c5cd
56 lines
2 KiB
ReStructuredText
56 lines
2 KiB
ReStructuredText
TC Total Compute Platform
|
|
==========================
|
|
|
|
Some of the features of TC platform referenced in TF-A include:
|
|
|
|
- A `System Control Processor <https://github.com/ARM-software/SCP-firmware>`_
|
|
to abstract power and system management tasks away from application
|
|
processors. The RAM firmware for SCP is included in the TF-A FIP and is
|
|
loaded by AP BL2 from FIP in flash to SRAM for copying by SCP (SCP has access
|
|
to AP SRAM).
|
|
- GICv4
|
|
- Trusted Board Boot
|
|
- SCMI
|
|
- MHUv2
|
|
|
|
Currently, the main difference between TC0 (TARGET_PLATFORM=0) and TC1
|
|
(TARGET_PLATFORM=1) platforms w.r.t to TF-A is the CPUs supported. TC0 has
|
|
support for Cortex A510, Cortex A710 and Cortex X2, while TC1 has support for
|
|
Cortex A510, Cortex Makalu and Cortex Makalu ELP Arm CPUs.
|
|
|
|
|
|
Boot Sequence
|
|
-------------
|
|
|
|
The execution begins from SCP_BL1. SCP_BL1 powers up the AP which starts
|
|
executing AP_BL1 and then executes AP_BL2 which loads the SCP_BL2 from
|
|
FIP to SRAM. The SCP has access to AP SRAM. The address and size of SCP_BL2
|
|
is communicated to SCP using SDS. SCP copies SCP_BL2 from SRAM to its own
|
|
RAM and starts executing it. The AP then continues executing the rest of TF-A
|
|
stages including BL31 runtime stage and hands off executing to
|
|
Non-secure world (u-boot).
|
|
|
|
Build Procedure (TF-A only)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- Obtain arm `toolchain <https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads>`_.
|
|
Set the CROSS_COMPILE environment variable to point to the toolchain folder.
|
|
|
|
- Build TF-A:
|
|
|
|
.. code:: shell
|
|
|
|
make PLAT=tc BL33=<path_to_uboot.bin> \
|
|
SCP_BL2=<path_to_scp_ramfw.bin> TARGET_PLATFORM={0,1} all fip
|
|
|
|
Enable TBBR by adding the following options to the make command:
|
|
|
|
.. code:: shell
|
|
|
|
MBEDTLS_DIR=<path_to_mbedtls_directory> \
|
|
TRUSTED_BOARD_BOOT=1 \
|
|
GENERATE_COT=1 \
|
|
ARM_ROTPK_LOCATION=devel_rsa \
|
|
ROT_KEY=plat/arm/board/common/rotpk/arm_rotprivk_rsa.pem
|
|
|
|
*Copyright (c) 2020-2021, Arm Limited. All rights reserved.*
|