This is for SMMU and Remapper enabled/disabled for
Linux FCS feature. The JTAG ID is to determine which
Agilex5 model shall be implemented.
Change-Id: Ib10d0062de8f6e27413af3dd271d97b9c2e5c079
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Add QSPI ECC new opcodes for Linux to access to SDM register
Change-Id: If9ac35afdddb91db6bad6b474060cd001f6d89e6
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
This patch is used to implement system manager data
support for Agilex5 SoC FPGA.
1. Initial SM bring up
2. Support Candence SDMMC/NAND/COMBO PHY
3. Updated product name -> Agilex5
4. Updated register address based on y22ww52.2 RTL
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I12712bddfb67e36a2bf56d2d98ea4ca3037f0a82
This patch is to restructure system manager. Move platform dependent
MACROs to individual platform system manager. Common system manager will
remain for those common declaration only.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I2f52d3eaf47716f7dfc636bbf1a23d68a04f39cb
When HPS requests QSPI controller access the SDM returns the QSPI
reference clock frequency. Store the provided reference clock frequency
(in kHz) in BOOT_SCRATCH_COLD_0 register (bits [27:0]) as u-boot
QSPI driver expects this.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Change-Id: I6b95c19db602387a79ff10abdebbc57abb0c07ff
This adds F2S and S2F bridge enable, disable and reset
sequence to enable, disable and reset properly the bridges
in SMC call or during reset.
The reset is also maskable as the SMC from uboot can
pass in the bridge mask when requesting for bridge
enable or disable.
Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ie144518c591664ef880016c9b3706968411bbf21
Move codes that previously were part of system_manager driver into
firewall driver which are more appropriate based on their functionalities.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I35e9d792f35ee7491c2f306781417a0c8faae3fd
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Refactor NOC header to be shareable across both Stratix 10 and Agilex
platforms. This patch also removes redundant NOC declarations in system
manager header file.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I6348b67a8b54c2ad19327d6b8c25ae37d25e4b4a
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
SError and Abort are handled in Linux (EL1) instead of
EL3. This patch adds some functionality that complements the
use cases by Linux as follows:
- Provide SMC for ECC DBE notification to EL3
- Determine type of reset needed and service the request in
place of Linux
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: I43d02c77f28004a31770be53599a5a42de412211
FPGAINTF wasn't enabled when configuring pinmux. This fixes the issue.
Signed-off-by: Tien Hock Loh <tien.hock.loh@intel.com>
Change-Id: I5a6aacd504901b8f7327b2f4854b8a77d0c37019
DRVSEL and SMPLSEL needs to be set so that it can properly go into full
speed mode. This needs to be done in EL3 as the registers are secured.
Signed-off-by: Tien Hock Loh <tien.hock.loh@intel.com>
Change-Id: Ia2f348e7742ff7b76da74d392ef1ce71e2f41677
This initializes the EMAC PHY in both Stratix 10 and Agilex,
without this, EMAC PHY wouldn't work correctly.
Change-Id: I7e6b9e88fd9ef472884fcf648e6001fcb7549ae6
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
This flag warns if anything is declared more than once in the same
scope, even in cases where multiple declaration is valid and changes
nothing.
Consequently, this patch also fixes the issues reported by this
flag. Consider the following two lines of code from two different source
files(bl_common.h and bl31_plat_setup.c):
IMPORT_SYM(uintptr_t, __RO_START__, BL_CODE_BASE);
IMPORT_SYM(unsigned long, __RO_START__, BL2_RO_BASE);
The IMPORT_SYM macro which actually imports a linker symbol as a C expression.
The macro defines the __RO_START__ as an extern variable twice, one for each
instance. __RO_START__ symbol is defined by the linker script to mark the start
of the Read-Only area of the memory map.
Essentially, the platform code redefines the linker symbol with a different
(relevant) name rather than using the standard symbol. A simple solution to
fix this issue in the platform code for redundant declarations warning is
to remove the second IMPORT_SYM and replace it with following assignment
static const unsigned long BL2_RO_BASE = BL_CODE_BASE;
Change-Id: If4835d1ee462d52b75e5afd2a59b64828707c5aa
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Refactored system manager driver to be shared across both intel platform
Signed-off-by: Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: Ic4d056c3d15c3152403dc11641c2452770a6162d
