Modify the log level from WARNING to VERBOSE for the SDS region
validity check. An invalid region causes the initialization step
to fail, but normally it's only a temporary condition as the
actual initialization of the region (such as adding a valid region
descriptor structure) can happen asynchronously in another system
component. The goal of this tiny modification is to avoid flooding
the log with this message when we're waiting in a loop for the
region initialization to happen.
Change-Id: I180e35e25df3f31bbc816e6421ded17ba6ae1d85
Signed-off-by: David Vincze <david.vincze@arm.com>
Extend the SDS driver to be able to handle multiple
SDS regions:
- AP-SCP
- AP-RSS
Change-Id: Id303840b248c383b3f960227cbf6333d1cc75e65
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Signed-off-by: David Vincze <david.vincze@arm.com>
Reading the SCMI mailbox status in polling mode causes a burst of bus
accesses. On certain platforms, this would not be ideal as the shared
bus on the CPU subsystem might cause contentions across all the CPUs.
So allow platforms to specify a delay to be introduced while polling.
Change-Id: Ib90ad7b5954854071cfd543f4a27a178dde3d5c6
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
To initiate a reset or reboot, the nonsecure OS invokes the PSCI
SYSTEM_RESET function from any one core. As per the PSCI specification,
it is the responsibility of firmware to implement the system view of
the reset or reboot operation. For the platforms supported by CSS,
trigger the reset/reboot operation by sending an SGI to rest all CPUs
which are online. The CPUs respond to this interrupt by initiating its
powerdown sequence.
In addition to these changes, fix coding style issues that are not
directly related to the code being introduced in this patch.
Change-Id: I547253ee28ef7eefa78180d016893671a406bbfa
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Before issuing the system power down command, set the trusted mailbox
to 0. This will ensure that in the case of a warm/cold reset, the
primary CPU executes from the cold boot sequence, clearing any stale
jump address at this location.
Change-Id: I491ef5baf7a6728acd7e90e4558939ba77b8f9bf
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
When tf-a is built with the llvm toolchain, the compiler optimizes the
variable in some way which results in SCMI_MSG_GET_TOKEN assert failure
in multiple places. This patch makes the msg_header variable in
mailbox_mem struct volatile, which seems to fix the issue.
Signed-off-by: sahil <sahil@arm.com>
Change-Id: I1d28b30a6472fc23ed85adff9cf73dfb536e39cc
Currently the SCMI driver reports:
INFO: Initializing driver on Channel 0
on the console, which is not very specific (which driver?).
Add "SCMI" to the message so the user knows what the firmware is trying
to initialise.
Change-Id: Id8202655d07b8e12fe07670d462c6202e6eae2f0
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Add newline(\n) to make the message clearer when the warnings are
really triggered.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I5e2574a52c9065db32ecb4d453b9b02445f69a82
Cleaned up confused naming between TB_FW and FW_CONFIG.
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I9e9f6e6ca076d38fee0388f97d370431ae067f08
The cpu index was wrongly checked causing it to assert always.
Since this code path is exercised only during TF test "NODE_HW_STAT",
which queries Power state from SCP, this bug was not detected earlier.
Change-Id: Ia25cef4c0aa23ed08092df39134937a2601c21ac
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Instead, pass back the error to the calling function. This allows
platform code to fall back to another PSCI implementation if
scpi_wait_ready() or a later SCPI command fails.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Ib4411e63c2512857f09ffffe1c405358dddeb4a6
On systems that have multiple platform components that can interpret the
SCMI messages, there is a need to support multiple SCMI channels (one
each to those platform components). Extend the existing SCMI interface
that currently supports only a single SCMI channel to support multiple
SCMI channels.
Change-Id: Ice4062475b903aef3b5e5bc37df364c9778a62c5
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
In order to allow the MHUv2 driver to be usable with multiple MHUv2
controllers, use the base address of the controller from the platform
information instead of the MHUV2_BASE_ADDR macro.
Change-Id: I4dbab87b929fb0568935e6c8b339ce67937f8cd1
Signed-off-by: Aditya Angadi <aditya.angadi@arm.com>
NOTE for platform integrators:
API `plat_psci_stat_get_residency()` third argument
`last_cpu_idx` is changed from "signed int" to the
"unsigned int" type.
Issue / Trouble points
1. cpu_idx is used as mix of `unsigned int` and `signed int` in code
with typecasting at some places leading to coverity issues.
2. Underlying platform API's return cpu_idx as `unsigned int`
and comparison is performed with platform specific defines
`PLAFORM_xxx` which is not consistent
Misra Rule 10.4:
The value of a complex expression of integer type may only be cast to
a type that is narrower and of the same signedness as the underlying
type of the expression.
Based on above points, cpu_idx is kept as `unsigned int` to match
the API's and low-level functions and platform defines are updated
where ever required
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ib26fd16e420c35527204b126b9b91e8babcc3a5c
NOTE: __ASSEMBLY__ macro is now deprecated in favor of __ASSEMBLER__.
All common C compilers predefine a macro called __ASSEMBLER__ when
preprocessing a .S file. There is no reason for TF-A to define it's own
__ASSEMBLY__ macro for this purpose instead. To unify code with the
export headers (which use __ASSEMBLER__ to avoid one extra dependency),
let's deprecate __ASSEMBLY__ and switch the code base over to the
predefined standard.
Change-Id: Id7d0ec8cf330195da80499c68562b65cb5ab7417
Signed-off-by: Julius Werner <jwerner@chromium.org>
Payload length of the get dram mapping information message is 0.
The mbx_mem->len parameter should be 4, it only contains
message header.
Fixes: b67d202 ("plat/synquacer: enable SCMI support")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Change-Id: If1cd4c855da2dc5dc4b6da3bea152b8441971de7
Improved support for W=2 compilation flag by solving some nested-extern
and sign-compare warnings.
The libraries are compiling with warnings (which turn into errors with
the Werror flag).
Outside of libraries, some warnings cannot be fixed.
Change-Id: I06b1923857f2a6a50e93d62d0274915b268cef05
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific protocol(0x80).
This vendor specific protocol is used to get the dram mapping information
from SCP.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Fix some typos and clarify some sentences.
Change-Id: Id276d1ced9a991b4eddc5c47ad9a825e6b29ef74
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
