This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.
The `silent` and `verbose` variables are boolean values determining
whether the build system has been configured to run silently or
verbosely respectively (i.e. with `--silent` or `V=1`).
These two modes cannot be used together - if `silent` is truthy then
`verbose` is always falsy. As such:
make --silent V=1
... results in a silent build.
In addition to these boolean variables, we also introduce two new
variables - `s` and `q` - for use in rule recipes to conditionally
suppress the output of commands.
When building silently, `s` expands to a value which disables the
command that follows, and `q` expands to a value which supppresses
echoing of the command:
$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed but not echoed'
When building verbosely, `s` expands to a value which disables the
command that follows, and `q` expands to nothing:
$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed and echoed'
In all other cases, both `s` and `q` expand to a value which suppresses
echoing of the command that follows:
$(s)echo 'This command is executed but not echoed'
$(q)echo 'This command is executed but not echoed'
The `s` variable is predominantly useful for `echo` commands, where you
always want to suppress echoing of the command itself, whilst `q` is
more useful for all other commands.
Change-Id: I8d8ff6ed714d3cb401946c52955887ed7dca602b
Signed-off-by: Chris Kay <chris.kay@arm.com>
This small change creates individual Make non-phony targets for the Bl2
and BL31 SREC binaries to avoid rebuilding them unnecessarily.
Change-Id: Ia8e5db0e4a968d4b379fdb66123b6a8f20933bf5
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change migrates the values of `CC`, `CPP`, `AS` and other toolchain
variables to the new `$(toolchain)-$(tool)` variables, which were
introduced by the toolchain refactor patch. These variables should be
equivalent to the values that they're replacing.
Change-Id: I644fe4ce82ef1894bed129ddb4b6ab94fb04985d
Signed-off-by: Chris Kay <chris.kay@arm.com>
Use long instead of long long on aarch64 for 64_t stdint types.
Introduce inttypes.h to properly support printf format specifiers for
fixed width types for such change.
Change-Id: I0bca594687a996fde0a9702d7a383055b99f10a1
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Add support to identify Silicon Linux RZ/G2E evaluation kit (EK874).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: Id7bdbc9b0d25aa9af496d58d4bd5055579edc104
Switch using common ddr driver code from renesas/common/ddr directory
for RZ/G2M SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Change-Id: I807dcb0bc5186bd32bc1c577945d28634bb10e1f
Add DT node support for channel 0 where physical memory is split
between 32bit space and 64bit space.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I99a18dbb14cdb54100a836c16445242e430794e3
The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.
This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Change-Id: I3ed55aa4a2cc5c9d9cd6440e087bcd93186520c7
