The commit d76f012ea8 ("refactor(imx8m): replace magic number with
enum type") also hardcodes the domain permissions configuration for the
UARTs, causing a regression for any board using a boot console different
from UART2. Indeed, previously, the RDC_PDAP_UARTn registers were set to
the reset value (0xff), meaning all domains were enabled for read and
write access.
This patch fixes this regression by ensuring that the console always has
read/write access enabled for domain 0.
Tested on a i.MX8MN BSH SMM S2 PRO board.
Fixes: d76f012ea8 ("refactor(imx8m): replace magic number with enum type")
Change-Id: I2670bf485372f32ef45cebb72a7694a9a800f417
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Optionally take params from BL2 to offer more flexibility to BL2 on
where and if a BL32 image is expected. This uses imx_bl31_params_parse()
to check if arg0 can safely be accessed as a pointer and actually
contains a bl_params_t structure. If not, the hardcoded parameter
values are used as before.
Change-Id: Ia12d35778f4d550860e517f2a1f5c5d062f3283a
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Always map the BL32 memory can interfere with the BL33 mapping if the
BL33 is not aware of the mapping, e.g. different memory tagging
secure/non-secure. Therefore map the memory only if BL32 (opteed,
trusty) is enabled and BL33 is aware of this memory mapping.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I9c2bf78aa6e88c93e749a9248724186fee9df864
Port the workaround from the downstream imx-atf [1]:
| commit 1990081264f40822d1564f4562f05bbbc0c2941b
| Author: Ji Luo <ji.luo@nxp.com>
| Date: Thu May 20 16:26:55 2021 +0800
|
| MA-19071 imx8mn: workaround for errata ERR050362
|
| Configure the force_incr programmable bit in GPV_5 of PL301_display,
| which fixes partial write issue. This workaround was done in MCU FW
| before, move it to TF-A now as MCU should not touch secure world.
|
| Change-Id: I2e5bbc764640afeab6ac2f4b202939b59bd3b3f2
| Signed-off-by: Ji Luo <ji.luo@nxp.com>
[1] https://github.com/nxp-imx/imx-atf.git
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Iaff5f1faa143204d64c075b288f8dd13eb2902d8
Allow non-privileged access to all SNVS registers in case of no TEE is
available.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I44686a3639a68c72c7eacc80691c294d5c32c9ae
Switch from IMX_BOOT_UART_BASE=0 to IMX_BOOT_UART_BASE=auto to make it
more obvious that the detection is based on the runtime autodetection.
In addition this moves the evaluation of IMX_BOOT_UART_BASE into the
makefile which removes the ugly conditional compilation as well.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I92c13607bf81c6267f4b6aee829d74902b7f72d2
Provide a helper to detect the enabled UART device during runtime. This
lower the integration effort and make it more straight forward for
'simple' use-cases with a single UART enabled. If multiple UARTs are
enabled the first enabled is returned.
The auto-detection is enabled by setting IMX_BOOT_UART_BASE=0 to keep
the backward compatibility. For more advanced use-cases (multiple UARTs
are enabled) the user still has to provide the correct base address.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I300a167e1a10f9aa991c8d1c3efe2c6b23f56c47
Enable PIE support so the BL31 firmware can be loaded from anywhere
within the OCRAM (SRAM). For the PIE support we only need to replace the
BL31_BASE define by the BL31_START symbol which is a relocatable and we
need to enable it by setting ENABLE_PIE := 1.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I33c8e35c35112d70d2725eebe484a853a8aad9e0
Introduce BL31_SIZE define and calculate the limit based on the
BL31_BASE and the BL31_SIZE define. Also make use of SZ_128K to make it
easier to read. This is required for later BL31 PIE support since it
drops the calculation based on the BL31_LIMIT and BL31_BASE.
While on it remove the duplicated <lib/utils_def.h> include.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Ifca40bd5682ef993db986439115abd9e9a66a5b2
No functional change.
Use the setup_page_tables() helper function which does the three calls
for us. Also the function has some logging support which will be nice
during debugging.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: I2f0182f19300a3a57bbeb7e2107c5fb5525dd0c1
No functional change.
Introduce the bl_regions array to gather all regions and make use of the
MAP_REGION_FLAT() macro. The array is than passed to mmap_add() to map
all regions. While on it introduce some defines so the addr, size and
flags can be read more easily.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Id5849d2a7326a943927f458f1c6abbc041f5be18
In order for HAB to perform operations, memory regions has to be mapped
in TF-A, which HAB ROM code would use internally.
Include those memory blocks for i.MX8MN SoC. Of a special note, the DRAM
block is mapped with complete size available on the platform and uses
MT_RW attributes, this is required to minimize the size of translation
tables and provide a possibility to exchange the execution results
between EL3 and EL1&2, see details in [1].
Link: [1]: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/16880
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Change-Id: If7a2b718658db452871e1ae56b71a4983e8ef2fe
CAAM provides serial output during initialization, but the serial init
occurs after CAAM. This leads to serial output produced by CAAM init
function to be omitted and not displayed.
Change the order of initialization and call CAAM init after Serial. This
has no impact as Serial does not require CAAM to be initialized upfront.
Fixes: 2502709f60 ("plat: imx8m: Add caam module init on imx8m")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Change-Id: I09c0a5474a1babfb0b53c4455891689ec08b5bdb
Add trusty support for imx8mn, default load address and
size of trusty are 0xbe000000 and 0x2000000.
Signed-off-by: Ji Luo <ji.luo@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I63fd5159027d7400b8c6bfc03193dd1330c43140
Enable the OCRAM_S TZ for secure protection by default on
i.MX8MN/i.MX8MP. And lock the ocram secure access configure
on i.MX8MM/i.MX8MP.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I2e24f4b823ee5f804415218d5c2e371f4e4c6fe1
Enable the CSU init on i.MX8M SoC family. The 'csu_cfg' array
is just a placeholder for now as example with limited config listed.
In real use case,user can add the CSU config as needed based on system design.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I1f7999efa346f18f6625ed8c478d088ed75f7833
Replace those RDC config related magic numbers with enum type
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I6245ccfa74d079179dc0f205980c2daf5c7af786
