This new workaround takes advantage of the per core IMR
registers in GPC in order to unmask the IRQ0, still generated
by the 12bit in IOMUX_GPR register (which now remains always set),
so it can only wake up one core at the time.Also, this entire
workaround has now been moved here in TF-A, allowing the kernel
side to be minimal.
Another advantage this workaround brings is the removal of the
50us delay (which was necessary before in gic_raise_softirq in
kernel) by allowing the core that is waking up to mask his own
IRQ0 in the suspend finish callback.
One important change here is the way the cores are woken up in
dram_dvfs_handler. Since the wake up mechanism has changed from
asserting the 12th bit in IOMUX_GPR and leaving the IMR1 1st bit
on for each core to exactly the reverse, that is, leaving the
IOMUX_GPR 12th bit always set and then masking/unmasking the IMR1
1st bit for each independent core, we need to use the imx_gpc_core_wake
to wake up the cores.
Also, the 50us udelay is moved to TF-A (inside imx_pwr_domain_off)
from kernel(gic_raise_softirq), since the new cpuidle workaround
does not need it in order to clean the IOMUX_GPC 12bit. For now,
the udelay seems to be still needed in order to delay the affinity
info OFF for the dying core. This is something that needs further
investigation.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I9f17ff6fc3452b8225a50b232964712aafeab78a
Function imx_system_off() writes SNVS_LPCR register to power off the SoC
without bit masking. This clears other bits like LPWUI_EN and breaks
the function of SoC wake-up using RTC alarm. Fix it by updating poweroff
related bits only.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Change-Id: If641af4dc1103c67e1a645c03bb36a5f56665aef
Swap the BL31_BASE define with the BL31_START symbol. This is required
for later added PIE support because the symbol location can be relocated
whereas the define can't be relocated. In case of disabled PIE support
BL31_START equals BL31_BASE and so we don't need a ifdef.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Change-Id: Ic1bbf3af5b346898bfcbb207ffc27d9a5bdcaae7
Add PLL power down override & bypass support when
system enter DSM mode.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I50cd6b82151961ab849f58714a8c307d3f7f4166
Add imx_system_reset2 which extends existing SYSTEM_RESET. It provides
architectural reset definitions and vendor-specific resets.
By default warm reset is triggered.
Also refactor existing implementation of wdog reset, add details about
each flag used.
Change-Id: Ia7348c32c385f1c61f8085776e81dd1e38ddda5c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Keep A53 PLAT(SCU) power domain on in wait mode(ret).
RBC count only need to be set in PLAT OFF mode, so
change it accordingly.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ie55e25c8210d298506fc4dca7a9653583db45e0c
for the i.MX8M SOCs, part of the code for gpc
and PSCI implementation can be reused and make it
common for all these SoCs. this patch extracts
the common part for reuse.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
