Modify the DDR driver to handle the DDR power supplies when a PMIC
is present in the function stm32mp_board_ddr_power_init(), define
in the platform file.
This patch allows to easily modify the used DDR power supplies
for customer boards, when they don't use STPMIC1 PMU or when
the regulators are not connected as on the STMicroelectronics
boards.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Change-Id: I93ee6295ef7032ac20f03608d22cd460f7d87ef5
This corrects MISRA C2012-9.5:
Where designated initializers are used to initialize an array object
the size of the array shall be specified explicitly.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I4f8da6b0ce73df65b2b45ba10d4ca16ed8b70113
This corrects MISRA C2012-20.7
Expressions resulting from the expansion of macro parameters shall be
enclosed in parentheses.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I9269d7a5b6aa4573bc0ca55b3054c3475dc4b6b2
This new function pmic_voltages_init() is used to set the minimum value
for STM32MP13 VDDCPU and VDDCORE regulators. This value is retrieved
from device tree.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ibbe237cb5dccc1fddf92e07ffd3955048ff82075
* GPIO: On STM32MP13, there are no banks GPIOJ, GPIOK and GPIOZ.
* STM32MP13 is a single Cortex-A7 CPU: remove reset from MPU1
and reset from MCU traces
* There is no MCU on STM32MP13. Put MCU security management
under STM32MP15 flag.
* The authentication feature is not supported yet on STM32MP13,
put the code under SPM32MP15 flag.
* On STM32MP13, the monotonic counter is managed in ROM code, keep
the monotonic counter update just for STM32MP15.
* SYSCFG: put registers not present on STM32MP13 under STM32MP15
flag, as the code that manages them.
* PMIC: use ldo3 during DDR configuration only for STM32MP15
* Reset UART pins on USB boot is no more required.
Change-Id: Iceba59484a9bb02828fe7e99f3ecafe69c837bc7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
The static was found by sparse tool:
drivers/st/pmic/stm32mp_pmic.c:456:18: warning: symbol 'pmic_ops'
was not declared. Should it be static?
The const was also missing.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ibb5cfaf67ac980bf0af27712a95dbef05b617c25
Replace %d with %u in log, to avoid warning when
-Wformat-signedness is enabled.
Change-Id: Ied5823520181f225ae09bd164e2e52e9a7692c60
Signed-off-by: Yann Gautier <yann.gautier@st.com>
print_pmic_info_and_debug() prints the PMIC version ID and displays
regulator information if debug is enabled.
It is under DEBUG flag and called after initialize_pmic() in BL2.
Change-Id: Ib81a625740b7ec6abb49cfca05e44c69efaa4718
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Store status of dt_pmic_status() as local static variable,
this avoids parsing DT several times.
In the same way, store nodes in dt_pmic_i2c_config() and
in dt_get_pmic_node() as local static variables.
Change-Id: I4585e9dfdde2847a369bffcc6f2b39ecc2b74de1
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
In pmic_operate(), "regulators" node value must be checked before
entering in the fdt_for_each_subnode loop.
Change-Id: I1460cd24ec56ec47ab644f396b71b92973e75fb4
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Make sure that i2c->i2c_state is correctly initialized
with I2C_STATE_RESET value this avoid hi2c->lock to not
be set to 0 when calling stm32_i2c_init during platform
suspend/resume operations.
Change-Id: I3b4c1f9115589325eb256789a1764c322741db7d
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Register in the shared resources driver the secure or non-secure
state of the PMIC.
Change-Id: Ic1f172ba62785018f8e9bb321782d725e2d2f434
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Regulator configuration at boot takes more information from DT.
I2C configuration from DT is done in I2C driver.
I2C driver manages more transfer modes.
The min voltage of buck1 should also be increased to 1.2V,
else the platform does not boot.
Heavily modifies stm32_i2c.c since many functions move inside the source
file to remove redundant declarations.
Change-Id: I0bee5d776cf3ff15e687427cd6abc06ab237d025
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
Include all RCC, clocks and reset headers from stm32mp1_def.h
which if exported to the firmware through platform_def.h.
The same dependency removal is done in common code as well.
Some useless includes are also removed in stm32_sdmmc2 driver.
Change-Id: I731ea5775c3fdb7f7b0c388b93923ed5e84b8d3f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions
that can be used in drivers shared by different platforms.
Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Change fdt_check_status function to fdt_get_status.
Update GPIO defines.
Move some functions in gpio driver, instead of dt helper file.
Add GPIO bank helper functions.
Use only one status field in dt_node_info structure including both status
and secure status.
Change-Id: I34f93408dd4aac16ae722f564bc3f7d6ae978cf4
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
This is the correct name of the IP.
Rename stm32mp1_pmic files to stm32mp_pmic.
Change-Id: I238a7d1f9a1d099daf7788dc9ebbd3146ba2f15f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
2019-01-18 15:45:08 +01:00
Renamed from drivers/st/pmic/stm32mp1_pmic.c (Browse further)
