* changes:
feat(stm32mp2): use early traces
feat(st-bsec): use early traces
refactor(st): replace STM32MP_EARLY_CONSOLE with EARLY_CONSOLE
feat(console): introduce EARLY_CONSOLE
feat(bl32): create an sp_min_setup function
Layout calculation is spread out between core BL1 logic and common
platform code. Relocate these into common platform code so they are
organised logically.
Change-Id: I8b05403e41b800957a0367316cecd373d10bb1a4
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
This is a generic porting of what was done on ST platforms with flag
STM32MP_EARLY_CONSOLE. It creates the flag and the prototype for
plat_setup_early_console(). This function depends on platform
implementation. This function call is added at the beginning of each BL
image early setup function.
The patch also introduce an extra log macro: EARLY_ERROR. This can
replace ERROR macro in code that will only be executed before the
default console is enabled, and will do nothing when the EARLY_CONSOLE
is not enabled. This can then save some space in memory.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I77bf0a0c4289b4c7df94e4bfb783a938e05bf023
* changes:
feat(tc): group components into certificates
feat(dice): add cert_id argument to dpe_derive_context()
refactor(sds): modify log level for region validity
feat(tc): add dummy TRNG support to be able to boot pVMs
feat(tc): get the parent component provided DPE context_handle
feat(tc): share DPE context handle with child component
feat(tc): add DPE context handle node to device tree
feat(tc): add DPE backend to the measured boot framework
feat(auth): add explicit entries for key OIDs
feat(dice): add DPE driver to measured boot
feat(dice): add client API for DICE Protection Environment
feat(dice): add QCBOR library as a dependency of DPE
feat(dice): add typedefs from the Open DICE repo
docs(changelog): add 'dice' scope
refactor(tc): align image identifier string macros
refactor(fvp): align image identifier string macros
refactor(imx8m): align image identifier string macros
refactor(qemu): align image identifier string macros
fix(measured-boot): add missing image identifier string
refactor(measured-boot): move metadata size macros to a common header
refactor(measured-boot): move image identifier strings to a common header
GIC600 erratum 2384374 is a Category B erratum. Part 1 is fixed
in this patch, and the Part 1 failure mode is described as
'If the packet to be sent is a SET packet, then a higher priority SET
may not be sent when it should be until an unblocking event occurs.'
This is handled by calling gicv3_apply_errata_wa_2384374() in the
ehf_deactivate_priority() path, so that when EHF restores the priority
to the original priority, the interrupt packet buffered
in the GIC can be sent.
gicv3_apply_errata_wa_2384374() is the workaround for
the Part 2 of erratum 2384374 which flush packets from the GIC buffer
and is being used in this patch.
SDEN can be found here:
https://developer.arm.com/documentation/sden892601/latest/
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Change-Id: I4bb6dcf86c94125cbc574e0dc5119abe43e84731
The client platform relies on the DICE attestation
scheme. RSS provides the DICE Protection Environment
(DPE) service. TF-A measured boot framework supports
multiple backends. A given platform always enables
the corresponding backend which is required by the
attestation scheme.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: Idc3360d0d7216e4859e99b5db3d377407e0aeee5
There are various SMC calls which pass mpidr as an argument which is
currently tested at random places in SMC call path.
To make the mpidr validation check consistent across SMC calls, do
this check as part of SMC argument validation.
This patch introduce a helper function is_valid_mpidr() to validate
mpidr and call it as part of validating SMC arguments at starting of
SMC handlers (which expect mpidr as an argument).
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I11ea50e22caf17896cf4b2059b87029b2ba136b1
Rather than returning 0 or 1, the above function returns bool false
or true. No functional change.
Change-Id: Iea904ffc368568208fa8203e0d2e0cdaa500b1e0
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Added a platform function to measure and publish Public Key information.
Subsequent patches define this function for the FVP and TC platforms to
measure Public Key and publishes it to RSS if MEASURED_BOOT is
enabled.
Change-Id: I1f61f44c7a83bb4cbafbd1af97b5adeb8398e8e8
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Following discussions in the reviews of the patch that introduced
plat_convert_pk() function [1], it was decided to deprecate it to
avoid weak function declaration.
A new optional function pointer convert_pk is added to crypto_lib_desc_t.
A new function crypto_mod_convert_pk() will either call
crypto_lib_desc.convert_pk() if it is defined, or do the same
as what was done by the weak function otherwise.
[1] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/17174
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I9358867f8bfd5e96b5ee238c066877da368e43c6
Compared the full ROTPK with the ROTPK obtained from the certificate
when the platform supports full ROTPK instead of hash of ROTPK.
Additionally, changed the code to verify the ROTPK before relying on
it for signature verification.
Change-Id: I52bb9deb1a1dd5b184d3156bddad14c238692de7
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
BL2_AT_EL3 is an overloaded macro which has two uses:
1. When BL2 is entry point into TF-A(no BL1)
2. When BL2 is running at EL3 exception level
These two scenarios are not exactly same even though first implicitly
means second to be true. To distinguish between these two use cases we
introduce new macros.
BL2_AT_EL3 is renamed to RESET_TO_BL2 to better convey both 1. and 2.
Additional macro BL2_RUNS_AT_EL3 is added to cover all scenarious where
BL2 runs at EL3 (including four world systems).
BREAKING CHANGE: BL2_AT_EL3 renamed to RESET_TO_BL2 across the
repository.
Change-Id: I477e1d0f843b44b799c216670e028fcb3509fb72
Signed-off-by: Arvind Ram Prakash <arvind.ramprakash@arm.com>
Signed-off-by: Maksims Svecovs <maksims.svecovs@arm.com>
This patch adds support for setting configuration of DRAM banks
for FVP model in RMM-EL3 Boot Manifest structure.
Structure 'rmm_manifest' is extended with 'plat_dram' structure
which contains information about platform's DRAM layout:
- number of DRAM banks;
- pointer to 'dram_bank[]' array;
- check sum: two's complement 64-bit value of the sum of
data in 'plat_dram' and 'dram_bank[] array.
Each 'dram_bank' structure holds information about DRAM
bank base address and its size. This values must be aligned
to 4KB page size.
The patch increases Boot Manifest minor version to 2 and
removes 'typedef rmm_manifest_t' as per
"3.4.15.1. Avoid anonymous typedefs of structs/enums in headers" of
https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-style.html
Signed-off-by: AlexeiFedorov <Alexei.Fedorov@arm.com>
Change-Id: I5176caa5780e27d1e0daeb5dea3e40cf6ad5fd12
with reference to feature 04c730 (feat(cpus): make cache ops conditional),
booting with caches in debug recovery means SCTLR_C_BIT will be 0.
Wrap the assert for the d-cache enabled check in CONDITIONAL_CMO and
plat_can_cmo calls to allow booting with d-cache disabled.
Signed-off-by: Channagoud kadabi <kadabi@google.com>
Change-Id: I80153df493d1ec9e5e354c7c2e6a14322d22c446
In some platform the digest of the public key saved in the OTP is not
the digest of the exact same public key buffer needed to check the
signature. Typically, platform checks signature using the DER ROTPK
whereas some others add some related information. Add a new platform
weak function to transform the public key buffer used by
verify_signature to a platform specific public key.
Mark this new weak function as deprecated as it will be replaced
by another framework implementation.
Change-Id: I71017b41e3eca9398cededf317ad97e9b511be5f
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
This patch adds the following changes to complete the existing
TRNG implementation:
1. Adds a feature specific scope for buildlog generation.
2. Updates the docs on the build flag "TRNG_SUPPORT" and its values.
3. Makefile update and improves the existing comments at few sections
for better understanding of the underlying logic.
Change-Id: I3f72f0ccd5c94005a2df87158cf23199d2160d37
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Added a platform function to set and get DRTM error.
Also, added a platform function to reset the system.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I471f2387f8c78b21a06af063a6fa02cda3646557
Added necessary platform hooks for DRTM DMA protection.
These calls will be used by the subsequent DRTM implementation
patches.
DRTM platform API declarations have been listed down in a
separate header file.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Signed-off-by: Lucian Paul-Trifu <lucian.paultrifu@gmail.com>
Change-Id: Ib9726d1d3570800241bde702ee7006a64f1739ec
New helper functions are created to handle data & prefetch aborts
in AARCH32. They call platform functions, just like what
report_exception is doing.
As extended MSR/MRS instructions (to access lr_abt in monitor mode)
are only available if CPU (Armv7) has virtualization extension,
the functions branch to original report_exception handlers if this is
not the case.
Those new helpers are created mainly to distinguish data and prefetch
aborts, as they both share the same mode.
This adds 40 bytes of code.
Change-Id: I5dd31930344ad4e3a658f8a9d366a87a300aeb67
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This patch adds two helper functions:
- plat_ic_raise_ns_sgi to raise a NS SGI
- plat_ic_raise_s_el1_sgi to raise a S-EL1 SGI
Signed-off-by: Florian Lugou <florian.lugou@provenrun.com>
Change-Id: I6f262dd1da1d77fec3f850eb74189e726b8e24da
This patch also adds an initial RMM Boot Manifest (v0.1) for fvp
platform.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I1374f8f9cb207028f1820953cd2a5cf6d6c3b948
This patch adds the infrastructure needed to pass boot arguments from
EL3 to RMM and allocates a shared buffer between both worlds that can
be used, among others, to pass a boot manifest to RMM. The buffer is
composed a single memory page be used by a later EL3 <-> RMM interface
by all CPUs.
The RMM boot manifest is not implemented by this patch.
In addition to that, this patch also enables support for RMM when
RESET_TO_BL31 is enabled.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I855cd4758ee3843eadd9fb482d70a6d18954d82a
In order to provide the EL3 SPMC a sufficient datastore to
record memory descriptors, a accessor function is used.
This allows for the backing memory to be allocated in a
platform defined manner, to accommodate memory constraints
and desired use cases.
Provide an implementation for the Arm FVP platform to
use a default value of 512KB memory allocated in the
TZC RAM section.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I92bc55ba6e04bdad429eb52f0d2960ceda682804
Add a dummy realm attestation key to RMMD, and return it on request.
The realm attestation key is requested with an SMC with the following
parameters:
* Fid (0xC400001B2).
* Attestation key buffer PA (the realm attestation key is copied
at this address by the monitor).
* Attestation key buffer length as input and size of realm
attesation key as output.
* Type of elliptic curve.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I12d8d98fd221f4638ef225c9383374ddf6e65eac
Add a dummy platform token to RMMD and return it on request. The
platform token is requested with an SMC with the following parameters:
* Fid (0xC40001B3).
* Platform token PA (the platform token is copied at this address by
the monitor). The challenge object needs to be passed by
the caller in this buffer.
* Platform token len.
* Challenge object len.
When calling the SMC, the platform token buffer received by EL3 contains
the challenge object. It is not used on the FVP and is only printed to
the log.
Signed-off-by: Mate Toth-Pal <mate.toth-pal@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: I8b2f1d54426c04e76d7a3baa6b0fbc40b0116348
Add a platform hook for returning the boot index, i.e. the bank from
which the platform has booted the updatable firmware images. This
value will be passed to the Update Agent.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Ic7bef21071c48cfc7b69c50e89df9ff758d95b00
The metadata structure copy is passed to the platform routine to set
the image source to boot the platform from. This is done by reading
the metadata structure. Pass the metadata as a read-only copy to the
routine -- the routine only needs to consume the metadata values and
should not be able to update the metadata fields.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I399cad99ab89c71483e5a32a1de0e22df304f8b0
Implemented a platform function 'plat_mboot_measure_critical_data' to
measure critical data and record its measurement using the Event Log
driver.
'bl2_plat_mboot_finish' function invokes this platform function
immediately after populating the critical data.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia198295c6e07ab26d436eab1ff90df2cf28303af
It looks safer and cleaner approach to record the measurement taken by
BL1 straightaway in TCG Event Log instead of deferring these recordings
to BL2.
Hence pull in the full-fledged measured boot driver into BL1 that
replaces the former ad-hoc platform interfaces i.e.
bl1_plat_set_bl2_hash, bl2_plat_get_hash.
As a result of this change the BL1 of Arm FVP platform now do the
measurements and recordings of below images:
1. FW_CONFIG
2. TB_FW_CONFIG
3. BL2
Change-Id: I798c20336308b5e91b547da4f8ed57c24d490731
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Subsequent patches will provide a solution to do the BL2 hash measurement
and recording in BL1 itself, hence in preparation to adopt that solution
remove the logic of passing BL2 hash measurement to BL2 component
via TB_FW config.
Change-Id: Iff9b3d4c6a236a33b942898fcdf799cbab89b724
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Right now, the assumption is that the platform post-load hook takes
care of measuring the image that just got loaded. This is how it's
implemented on FVP.
This patch moves the measurement into the generic code
instead. load_auth_image() now calls plat_mboot_measure_image(),
which is a new platform interface introduced in this patch to measure
an image. This is called just after authenticating the image.
Implement plat_mboot_measure_image() for the Arm FVP platform. The code
is copied straight from the post-load hook.
As a result, the FVP specific implementation of
arm_bl2_plat_handle_post_image_load() is no longer needed. We can go
back to using the Arm generic implementation of it.
Change-Id: I7b4b8d28941a865e10af9d0eadaf2e4850942090
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Right now, the measured boot driver is strongly coupled with the TCG
event log driver. It would not be possible to push the measurements
somewhere else, for instance to a physical TPM.
To enable this latter use case, turn the driver's init and teardown
functions into platform hooks. Call them bl2_plat_mboot_init()/finish().
This allows each platform to implement them appropriately, depending on
the type of measured boot backend they use. For example, on a platform
with a physical TPM, the plat_mboot_init() hook would startup the TPM
and setup it underlying bus (e.g. SPI).
Move the current implementation of the init and teardown function to the
FVP platform layer.
Finally move the conditional compilation logic (#if MEASURED_BOOT) out
of bl2_main() to improve its readability. Provide a dummy implementation
in the case measured boot is not included in the build.
Change-Id: Ib6474cb5a9c1e3d4a30c7f228431b22d1a6e85e3
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Put default ea handler implementation into function plat_default_ea_handler()
which just print verbose information and panic, so it can be called also
from overwritten / weak function plat_ea_handler() implementation.
Replace every custom implementation of printing verbose error message of
external aborts in custom plat_ea_handler() functions by a common
implementation from plat_default_ea_handler() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I15897f61b62b4c3c29351e693f51d4df381f3b98
Added FWU platform specific functions declarations in common
platform header.
Change-Id: I637e61753ea3dc7f7e7f3159ae1b43ab6780aef2
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This adds the TRNG Firmware Interface Service to the standard
service dispatcher. This includes a method for dispatching entropy
requests to platforms and includes an entropy pool implementation to
avoid dropping any entropy requested from the platform.
Change-Id: I71cadb3cb377a507652eca9e0d68714c973026e9
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
And from crash_console_flush.
We ignore the error information return by console_flush in _every_
place where we call it, and casting the return type to void does not
work around the MISRA violation that this causes. Instead, we collect
the error information from the driver (to avoid changing that API), and
don't return it to the caller.
Change-Id: I1e35afe01764d5c8f0efd04f8949d333ffb688c1
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Currently, 'SMCCC_ARCH_FEATURES' SMC call handler unconditionally
returns 'SMC_OK' for 'SMCCC_ARCH_SOC_ID' function. This seems to
be not correct for the platform which doesn't implement soc-id
functionality i.e. functions to retrieve both soc-version and
soc-revision.
Hence introduced a platform function which will check whether SMCCC
feature is available for the platform.
Also, updated porting guide for the newly added platform function.
Change-Id: I389f0ef6b0837bb24c712aa995b7176117bc7961
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch adds support for Measured Boot driver functionality
in common Arm platform code.
Change-Id: If049dcf8d847c39023b77c0d805a8cf5b8bcaa3e
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch introduces dynamic configuration for SDEI setup and is supported
when the new build flag SDEI_IN_FCONF is enabled. Instead of using C arrays
and processing the configuration at compile time, the config is moved to
dts files. It will be retrieved at runtime during SDEI init, using the fconf
layer.
Change-Id: If5c35a7517ba00a9f258d7f3e7c8c20cee169a31
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Co-authored-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Currently BL2 passes TOS_FW_CONFIG address and size through registers to
BL31. This corresponds to SPMC manifest load address and size. The SPMC
manifest is mapped in BL31 by dynamic mapping. This patch removes BL2
changes from generic code (which were enclosed by SPD=spmd) and retrieves
SPMC manifest size directly from within SPMD. The SPMC manifest load
address is still passed through a register by generic code.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I35c5abd95c616ae25677302f0b1d0c45c51c042f
As a follow-up to bdd2596d4, and related to SPM Dispatcher
EL3 component and SPM Core S-EL2/S-EL1 component: update
with cosmetic and coding rules changes. In addition:
-Add Armv8.4-SecEL2 arch detection helper.
-Add an SPMC context (on current core) get helper.
-Return more meaningful error return codes.
-Remove complexity in few spmd_smc_handler switch-cases.
-Remove unused defines and structures from spmd_private.h
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I99e642450b0dafb19d3218a2f0e2d3107e8ca3fe
Implemented SMCCC_ARCH_SOC_ID call in order to get below
SOC information:
1. SOC revision
2. SOC version
Implementation done using below SMCCC specification document:
https://developer.arm.com/docs/den0028/c
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ie0595f1c345a6429a6fb4a7f05534a0ca9c9a48b
TBBR spec advocates for optional encryption of firmwares (see optional
requirement: R060_TBBR_FUNCTION). So add an IO abstaction layer to
support firmware decryption that can be stacked above any underlying IO/
packaging layer like FIP etc. It aims to provide a framework to load any
encrypted IO payload.
Also, add plat_get_enc_key_info() to be implemented in a platform
specific manner as handling of encryption key may vary from one platform
to another.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I9892e0ddf00ebecb8981301dbfa41ea23e078b03
Add framework for autheticated decryption of data. Currently this
patch optionally imports mbedtls library as a backend if build option
"DECRYPTION_SUPPORT = aes_gcm" is set to perform authenticated decryption
using AES-GCM algorithm.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I2966f0e79033151012bf4ffc66f484cd949e7271
This patch repurposes the TOS FW configuration file as the manifest for
the SPM core component which will reside at the secure EL adjacent to
EL3. The SPM dispatcher component will use the manifest to determine how
the core component must be initialised. Routines and data structure to
parse the manifest have also been added.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: Id94f8ece43b4e05609f0a1d364708a912f6203cb
NOTE for platform integrators:
API `plat_psci_stat_get_residency()` third argument
`last_cpu_idx` is changed from "signed int" to the
"unsigned int" type.
Issue / Trouble points
1. cpu_idx is used as mix of `unsigned int` and `signed int` in code
with typecasting at some places leading to coverity issues.
2. Underlying platform API's return cpu_idx as `unsigned int`
and comparison is performed with platform specific defines
`PLAFORM_xxx` which is not consistent
Misra Rule 10.4:
The value of a complex expression of integer type may only be cast to
a type that is narrower and of the same signedness as the underlying
type of the expression.
Based on above points, cpu_idx is kept as `unsigned int` to match
the API's and low-level functions and platform defines are updated
where ever required
Signed-off-by: Deepika Bhavnani <deepika.bhavnani@arm.com>
Change-Id: Ib26fd16e420c35527204b126b9b91e8babcc3a5c
Before adding any new SPM-related components we should first do
some cleanup around the existing SPM-MM implementation. The aim
is to make sure that any SPM-MM components have names that clearly
indicate that they are MM-related. Otherwise, when adding new SPM
code, it could quickly become confusing as it would be unclear to
which component the code belongs.
The secure_partition.h header is a clear example of this, as the
name is generic so it could easily apply to any SPM-related code,
when it is in fact SPM-MM specific.
This patch renames the file and the two structures defined within
it, and then modifies any references in files that use the header.
Change-Id: I44bd95fab774c358178b3e81262a16da500fda26
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
This patch provides the following features and makes modifications
listed below:
- Individual APIAKey key generation for each CPU.
- New key generation on every BL31 warm boot and TSP CPU On event.
- Per-CPU storage of APIAKey added in percpu_data[]
of cpu_data structure.
- `plat_init_apiakey()` function replaced with `plat_init_apkey()`
which returns 128-bit value and uses Generic timer physical counter
value to increase the randomness of the generated key.
The new function can be used for generation of all ARMv8.3-PAuth keys
- ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`.
- New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions
generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively;
pauth_disable_el1()` and `pauth_disable_el3()` functions disable
PAuth for EL1 and EL3 respectively;
`pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from
cpu-data structure.
- Combined `save_gp_pauth_registers()` function replaces calls to
`save_gp_registers()` and `pauth_context_save()`;
`restore_gp_pauth_registers()` replaces `pauth_context_restore()`
and `restore_gp_registers()` calls.
- `restore_gp_registers_eret()` function removed with corresponding
code placed in `el3_exit()`.
- Fixed the issue when `pauth_t pauth_ctx` structure allocated space
for 12 uint64_t PAuth registers instead of 10 by removal of macro
CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h`
and assigning its value to CTX_PAUTH_REGS_END.
- Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions
in `msr spsel` instruction instead of hard-coded values.
- Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI.
Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The implementation of the heap function plat_get_mbedtls_heap() becomes
mandatory for platforms supporting TRUSTED_BOARD_BOOT.
The shared Mbed TLS heap default weak function implementation is
converted to a helper function get_mbedtls_heap_helper() which can be
used by the platforms for their own function implementation.
Change-Id: Ic8f2994e25e3d9fcd371a21ac459fdcafe07433e
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
The previous commit added the infrastructure to load and save
ARMv8.3-PAuth registers during Non-secure <-> Secure world switches, but
didn't actually enable pointer authentication in the firmware.
This patch adds the functionality needed for platforms to provide
authentication keys for the firmware, and a new option (ENABLE_PAUTH) to
enable pointer authentication in the firmware itself. This option is
disabled by default, and it requires CTX_INCLUDE_PAUTH_REGS to be
enabled.
Change-Id: I35127ec271e1198d43209044de39fa712ef202a5
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
