* changes:
docs(maintainers): update NPU driver files
docs(ethos-n): update porting-guide.rst for NPU
feat(ethos-n): add separate RO and RW NSAIDs
feat(ethos-n)!: add protected NPU firmware setup
feat(ethos-n): add stream extends and attr support
feat(ethos-n): add reserved memory address support
feat(ethos-n): add event and aux control support
feat(ethos-n): add SMC call to get FW properties
refactor(ethos-n): split up SMC call handling
feat(ethos-n): add NPU firmware validation
feat(ethos-n): add check for NPU in SiP setup
feat(ethos-n)!: load NPU firmware at BL2
feat(juno): support ARM_IO_IN_DTB option for Juno
fix(fconf): fix FCONF_ARM_IO_UUID_NUMBER value
fix(fvp): incorrect UUID name in FVP tb_fw_config
fix(ethos-n): add workaround for erratum 2838783
feat(ethos-n): add support for NPU to cert_create
feat(ethos-n): add NPU support in fiptool
feat(ethos-n): add support to set up NSAID
build(fiptool): add object dependency generation
feat(ethos-n): add NPU sleeping SMC call
feat(ethos-n): add multiple asset allocators
feat(ethos-n): add reset type to reset SMC calls
feat(ethos-n): add protected NPU TZMP1 regions
build(ethos-n): add TZMP1 build flag
Mikael Olsson will no longer be working with the Arm(R) Ethos(TM)-N NPU
so Ştefana Simion will take over the ownership of the driver.
Change-Id: If22bbdcb26af9bf851efc14ad96ed76c745eadfd
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
New files have been added for the Arm(R) Ethos(TM)-N NPU driver with the
addition of TZMP1 support so the files in the maintainers list have been
updated accordingly.
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Change-Id: I3768b2ab78c117c1dd4fc03b38cf35f6811fa378
As part of release process revisit list of maintainers to keep
it updated.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I63b87265a6bff00ad05d8b3b7cad694cdf48e9ea
Add Muhammad Arsath K F in qti maintainer
Signed-off-by: Muhammad Arsath K F <quic_mkf@quicinc.com>
Change-Id: I71e6cc72b3c658730abe5255977f3b93dd7e4563
Code owners have been added for the Arm(R) Ethos(TM)-N NPU driver.
Change-Id: I0bda0d95151cdff5cd3a793c6c0e9ef6a9a5f50b
Signed-off-by: Mikael Olsson <mikael.olsson@arm.com>
Recently new Xilinx Versal NET platform has been merged but documentation
cover only zynqmp. Fix the fragment to cover all Xilinx documentation.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I10f8f865ca8d46518135adb80ba0ba4470534529
Adds a dispatcher for ProvenCore based on the test secure payload
dispatcher.
Signed-off-by: Florian Lugou <florian.lugou@provenrun.com>
Change-Id: I978afc3af6a6f65791655685a7bc80070673c9f3
Switch emails from Xilinx to AMD after acquisition.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I5d126dc49e53f2735bb7e103f8f883a9474206fc
John Powell is no longer part of the TF-A core team at Arm.
Change-Id: Iaa91474cb2c5c334b9ae6f2376724fad2677e285
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Jimmy Brisson is no longer part of the TF-A core team at Arm.
Change-Id: I2966c513a0c2cda438a05dedd42149d16190cbf6
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Adding Sandrine Bailleux for the PSA APIs and myself for the
MHU and RSS comms drivers as code owner.
Change-Id: Ib948479cc6e46163aae59c938877a2d0bcf91754
Signed-off-by: David Vincze <david.vincze@arm.com>
Renamed the existing SPM entry to the SPMD and add myself
as the SPMC maintainer.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: Ic74659b119986df5fc229a4470049d289eeef21a
Split TLK/Trusty SPD into two separate components and add additional
owners for Trusty SPD.
Signed-off-by: Marco Nelissen <marcone@google.com>
Change-Id: Ifabd1bb630fe4976e304fa29eac1c516ec6e2e18
Added myself and Sandrine Bailleux as code owners for Firmware
Update driver.
Signed-off-by: Manish V Badarkhe <manish.badarkhe@arm.com>
Change-Id: I34fad895c6236fedc814fb6da4b04fd7fbed9227
Propose myself as a code owner of the measured boot module.
Also do a couple of updates along the way:
- Add the measured boot bindings document to the list of measured
boot files.
- Fix the list of FVP files. plat/arm/board/fvp/fvp_measured_boot.c
does not exist anymore. It has been replaced by
plat/arm/board/fvp/fvp_measured_{bl1,bl2,common}_boot.c files.
Change-Id: Ifb34f4f7c704b1db966b44428bbffd48c5e3c42b
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Add Sieu Mun Tang and Benjamin Jit Loon Lim as new
Intel SocFPGA platform maintainers and remove the
rest of the Intel SocFPGA platform maintainers.
Signed-off-by: Sieu Mun Tang <sieu.mun.tang@intel.com>
Change-Id: Ieb9a35e278d70a12351aaccab90ddc7be09dc861
* changes:
docs(layerscape): add ls1088a soc and board support
feat(ls1088aqds): add ls1088aqds board support
feat(ls1088ardb): add ls1088ardb board support
feat(ls1088a): add new SoC platform ls1088a
build(changelog): add new scopes for ls1088a
feat(bl2): add support to separate no-loadable sections
refactor(layerscape): refine comparison of inerconnection
feat(layerscape): add soc helper macro definition for chassis 3
feat(nxp-gic): add some macros definition for gicv3
feat(layerscape): add CHASSIS 3 support for tbbr
feat(layerscape): define more chassis 3 hardware address
feat(nxp-crypto): add chassis 3 support
feat(nxp-dcfg): add Chassis 3 support
feat(lx2): enable DDR erratas for lx2 platforms
feat(layerscape): print DDR errata information
feat(nxp-ddr): add workaround for errata A050958
feat(layerscape): add new soc errata a010539 support
feat(layerscape): add new soc errata a009660 support
feat(nxp-ddr): add rawcard 1F support
fix(layerscape): fix build issue of mmap_add_ddr_region_dynamically
fix(nxp-tools): fix create_pbl print log
build(changelog): add new scopes for NXP driver
Update document for nxp-layerscape to add ls1088a SoC and ls1088ardb,
update maintainer of ls1088a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Ic7fdc7b1bbf22e50646991093366a88ee523ffe3
* changes:
docs(layerscape): add ls1046a soc and board support
feat(ls1046aqds): add board ls1046aqds support
feat(ls1046afrwy): add ls1046afrwy board support
feat(ls1046ardb): add ls1046ardb board support
feat(ls1046a): add new SoC platform ls1046a
fix(nxp-tools): fix tool location path for byte_swape
fix(nxp-qspi): fix include path for QSPI driver
build(changelog): add new scopes for NXP layerscape platforms
Update document for nxp-layerscape to add ls1046a SoC and ls1046ardb,
ls1046afrwy board support.
Also update maintainer of ls1046a platforms.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I522f978bc93aa8d1f1d60fa8efef392b7d854df7
diphda platform is now being renamed to corstone1000.
These changes are to replace all the instances and traces
of diphda corstone1000.
Change-Id: I330f3a112d232b99b4721b6bf0236253b068dbba
Signed-off-by: Arpita S.K <Arpita.S.K@arm.com>
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
The Qualcomm Snapdragon 410 is Qualcomm's first 64-bit SoC, released
in 2014 with four ARM Cortex-A53 cores. There are differents variants
(MSM8916, APQ8016(E), ...) that are all very similar. A popular device
based on APQ8016E is the DragonBoard 410c single-board computer,
but the SoC is also used in various mid-range smartphones/tablets.
This commit adds documentation for a minimal, community-maintained port
of TF-A/BL31 for MSM8916. The actual platform port is added in the
following four separate small commits to simplify the review process.
The code is primarily based on the information from the public
Snapdragon 410E Technical Reference Manual [1], combined with a lot of
trial and error to actually make it work.
Note that this port is a pure community effort without any
commercial interests and is not related to Qualcomm in any way.
The main motivation for this port is to have a minimal, updatable
firmware since this old chip does not receive many updates anymore from
Qualcomm. It works quite well for many use cases so I am willing to
maintain it as a "code owner". I have also added Nikita Travkin as
second code owner to help with reviews.
The main limitation so far is the lack of memory protection for TF-A.
This is similar to the ports for the Raspberry Pi but in this case not
a lack of hardware support but rather a lack of documentation. However,
this does not limit the usefulness of the port when used as a minimal
PSCI implementation.
[1]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdf
Change-Id: I676adf86061638cfc2f3ae8615470d145e84f172
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Added myself to be NXP common code and ls1028a, ls1043a platforms
maintainer.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: Iadffc5600e9bb2e94b1d545b8dd1a819358cabcb
This change introduces a new NPM run script to automatically generate
the release changelog, as well as bump version numbers across the
code-base and create the release tag.
This script runs [Standard Version] to execute this, which is a tool
designed around automating substantial parts of the release process.
This can be done by running:
npm run release -- [<standard-version args>]
Standard Version expects the project to adhere to the [Semantic
Versioning] convention which TF-A does not, so you may need to specify
the version manually, e.g.:
npm run release -- --release-as 2.6.0
Individual steps of the release process may also be skipped at-will,
which may be necessary when, for example, tweaking the changelog:
npm run release -- --skip.commit --skip.tag
Standard Version is configured by the `.versionrc.js` file, which
contains information about the Conventional Commits types and scopes
used by the project, and how they map to the changelog.
To maintain continuity with the existing changelog style - at least to
the extent possible in the move from manual to automatic creation - a
customized changelog template has been introduced, based on the
Conventional Commits template provided by Standard Version.
This template package extends the Conventional Commits template package
by introducing support for parsing the Conventional Commits scopes into
changelog sections, similarly to how they were previously organized.
[Standard Version]:
https://github.com/conventional-changelog/standard-version
[Semantic Versioning]: https://semver.org
Change-Id: I5bafa512daedc631baae951651c38c1c62046b0a
Signed-off-by: Chris Kay <chris.kay@arm.com>
This patch adds some documentation for the GPT library as well as adds
code owners for it.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: If1cd79626eadb27e1024d731b26ee2e20af74a66
This patch adds instructions on how to build and run TF-A
with FEAT_RME enabled. The patch also adds code owners for
FEAT_RME.
Signed-off-by: Zelalem Aweke <zelalem.aweke@arm.com>
Change-Id: Id16dc52cb76b1ea56ac5c3fc38cb0794a62ac2a1
This renames tc0 platform folder and files to tc, and introduces
TARGET_PLATFORM variable to account for the differences between
TC0 and TC1.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Change-Id: I5b4a83f3453afd12542267091b3edab4c139c5cd
This commit enables trusted-firmware-a with Trusted Board Boot support
for the Diphda 64-bit platform.
Diphda uses a FIP image located in the flash. The FIP contains the
following components:
- BL2
- BL31
- BL32
- BL32 SPMC manifest
- BL33
- The TBB certificates
The board boot relies on CoT (chain of trust). The trusted-firmware-a
BL2 is extracted from the FIP and verified by the Secure Enclave
processor. BL2 verification relies on the signature area at the
beginning of the BL2 image. This area is needed by the SecureEnclave
bootloader.
Then, the application processor is released from reset and starts by
executing BL2.
BL2 performs the actions described in the trusted-firmware-a TBB design
document.
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Change-Id: Iddb1cb9c2a0324a9635e23821c210ac81dfc305d
The two existing plat/rockchip code owners seem to be no longer active
in the project and are not responding to reviews. There have been a
couple of small fixup patches[1][2][3] pending for months that couldn't
be checked in for lack of Code-Owner-Review+1 flag. Add myself to the
code owner list to unblock this bottleneck (I have been deeply involved
in the rk3399 port, at least, so I know most of the code reasonably
well).
[1] https://review.trustedfirmware.org/9616
[2] https://review.trustedfirmware.org/9990
[2] https://review.trustedfirmware.org/10415
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic7b2bb73c35a9bea91ff46ee445a22819d2045d9
