Platforms which implement pwr_domain_pwr_down_wfi differ substantially
in behaviour. However, different cpus require similar sequences to power
down. This patch tightens the behaviour of these platforms to end on a
wfi loop after performing platform power down. This is required so that
platforms behave more consistently on power down, in cases where the wfi
can fall through.
Signed-off-by: Boyan Karatotev <boyan.karatotev@arm.com>
Change-Id: Ie29bd3a5e654780bacb4e07a6d123ac6d2467c1f
In anticpation of the next Trusted Firmware release update the to newest
2.x Mbed TLS library [1].
Note that the Mbed TLS project published version 3.x some time ago.
However, as this is a major release with API breakages, upgrading to
this one might require some more involved changes in TF-A, which we are
not ready to do. We shall upgrade to Mbed TLS 3.x after the v2.8 release
of TF-A.
[1] https://github.com/Mbed-TLS/mbedtls/tree/v2.28.1
Change-Id: I7594ad062a693d2ecc3b1705e944dce2c3c43bb2
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
RAS_TRAP_LOWER_EL_ERR_ACCESS was used to prevent access to RAS error
record registers (RAS ERR* & RAS ERX*) from lower EL's in any security
state. To give more fine grain control per world basis re-purpose this
macro to RAS_TRAP_NS_ERR_REC_ACCESS, which will enable the trap only
if Error record registers are accessed from NS.
This will also help in future scenarios when RAS handling(in Firmware
first handling paradigm)can be offloaded to a secure partition.
This is first patch in series to refactor RAS framework in TF-A.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ifa7f60bc8c82c9960adf029001bc36c443016d5d
This toolchain provides multiple cross compilers and is publicly
available on https://developer.arm.com/
We build TF-A in CI using:
AArch32 bare-metal target (arm-none-eabi)
AArch64 ELF bare-metal target (aarch64-none-elf)
Change-Id: I94e13f6c1ebe3a4a58ca6c79c1605bd300b372d3
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Currently, when SPMC at S-EL2 is used, we cannot use the RAS framework
to handle Group 0 interrupts. This is required on platforms where first
level of triaging needs to occur at EL3, before forwarding RAS handling
to a secure partition running atop an SPMC (hafnium).
The RAS framework depends on EHF and EHF registers for Group 0
interrupts to be trapped to EL3 when execution is both in secure world
and normal world. However, an FF-A compliant SPMC requires secure
interrupts to be trapped by the SPMC when execution is in S-EL0/S-EL1.
Consequently, the SPMC (hafnium) is incompatible with EHF, since it is
not re-entrant, and a Group 0 interrupt trapped to EL3 when execution is
in secure world, cannot be forwarded to an SP running atop SPMC.
This patch changes EHF to only register for Group 0 interrupts to be
trapped to EL3 when execution is in normal world and also makes it a
valid routing model to do so, when EL3_EXCEPTION_HANDLING is set (when
enabling the RAS framework).
Signed-off-by: Raghu Krishnamurthy <raghu.ncstate@gmail.com>
Change-Id: I72d4cf4d8ecc549a832d1c36055fbe95866747fe
FEAT_RNG_TRAP introduces support for EL3 trapping of reads of the
RNDR and RNDRRS registers, which is enabled by setting the
SCR_EL3.TRNDR bit. This patch adds a new build flag
ENABLE_FEAT_RNG_TRAP that enables the feature.
This feature is supported only in AArch64 state from Armv8.5 onwards.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: Ia9f17aef3444d3822bf03809036a1f668c9f2d89
OpenSSL 3.0 is a pre-requisite since v2.7 and can be installed
on the operating system by updating the previous version.
However, this may not be convenient for everyone, as some may
want to keep their previous versions of OpenSSL.
This update on the docs shows that there is an alternative to
install OpenSSL on the system by using a local build of
OpenSSL 3.0 and pointing both the build and run commands to
that build.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: Ib9ad9ee5c333f7b04e2747ae02433aa66e6397f3
Add an empty line just before the "Build Host" title.
Without this, the title is not properly recognized, it does not get
added to the table of contents and the underlining characters appear
as dashes, as can be seen here:
https://trustedfirmware-a.readthedocs.io/en/v2.7/getting_started/prerequisites.html#prerequisites
Change-Id: Ia89cf3de0588495cbe64b0247dc860619f5ea6a8
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Currently the SVE code hard codes a maximum vector length of 512 bits
when configuring SVE rather than the architecture supported maximum.
While this is fine for current physical implementations the architecture
allows for vector lengths up to 2048 bits and emulated implementations
generally allow any length up to this maximum.
Since there may be system specific reasons to limit the maximum vector
length make the limit configurable, defaulting to the architecture
maximum. The default should be suitable for most implementations since
the hardware will limit the actual vector length selected to what is
physically supported in the system.
Signed-off-by: Mark Brown <broonie@kernel.org>
Change-Id: I22c32c98a81c0cf9562411189d8a610a5b61ca12
This patch documents the RMM-EL3 Boot and runtime interfaces.
Note that for the runtime interfaces, some services are not
documented in this patch and will be added on a later doc patch.
These services are:
* RMMD_GTSI_DELEGATE
* RMMD_GTSI_UNDELEGATE
* RMMD_RMI_REQ_COMPLETE
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I8fcc89d91fe5a334c2f68c6bfd1fd672a8738b5c
This patch also adds an initial RMM Boot Manifest (v0.1) for fvp
platform.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I1374f8f9cb207028f1820953cd2a5cf6d6c3b948
This patch adds the infrastructure needed to pass boot arguments from
EL3 to RMM and allocates a shared buffer between both worlds that can
be used, among others, to pass a boot manifest to RMM. The buffer is
composed a single memory page be used by a later EL3 <-> RMM interface
by all CPUs.
The RMM boot manifest is not implemented by this patch.
In addition to that, this patch also enables support for RMM when
RESET_TO_BL31 is enabled.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I855cd4758ee3843eadd9fb482d70a6d18954d82a
This change adds "FEAT_TRBE" to be part of feature detection mechanism.
Previously feature enablement flags were of boolean type, containing
either 0 or 1. With the introduction of feature detection procedure
we now support three states for feature enablement build flags(0 to 2).
Accordingly, "ENABLE_TRBE_FOR_NS" flag is now modified from boolean
to numeric type to align with the feature detection.
Change-Id: I53d3bc8dc2f6eac63feef22dfd627f3a48480afc
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
This change adds "FEAT_BRBE" to be part of feature detection mechanism.
Previously feature enablement flags were of boolean type, possessing
either 0 or 1. With the introduction of feature detection procedure
we now support three states for feature enablement build flags(0 to 2).
Accordingly, "ENABLE_BRBE_FOR_NS" flag is now modified from boolean
to numeric type to align with the feature detection.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I1eb52863b4afb10b808e2f0b6584a8a210d0f38c
GCC 11 and Clang 14 now use the DWARF 5 standard by default however
Arm-DS currently only supports up to version 4. Therefore, for debug
builds, ensure the DWARF 4 standard is used.
Also update references for Arm DS-5 to it's successor Arm-DS (Arm
Development Studio).
Change-Id: Ica59588de3d121c1b795b3699f42c31f032cee49
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Host tools cert_tool and encrypt_fw refactored to be fully
compatible with OpenSSL v3.0.
Changes were made following the OpenSSL 3.0 migration guide:
https://www.openssl.org/docs/man3.0/man7/migration_guide.html
In some cases, those changes are straightforward and only
a small modification on the types or API calls was needed
(e.g.: replacing BN_pseudo_rand() with BN_rand(). Both identical
since v1.1.0).
The use of low level APIs is now deprecated. In some cases,
the new API provides a simplified solution for our goals and
therefore the code was simplified accordingly (e.g.: generating
RSA keys through EVP_RSA_gen() without the need of handling the
exponent). However, in some cases, a more
sophisticated approach was necessary, as the use of a context
object was required (e.g.: when retrieving the digest value from
an SHA file).
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I978e8578fe7ab3e71307450ebe7e7812fbcaedb6
Introduce PLAT_RSS_NOT_SUPPORTED build config to
provide a mocked version of PSA APIs. The goal is
to test the RSS backend based measured boot and
attestation token request integration on such
a platform (AEM FVP) where RSS is otherwise
unsupported. The mocked PSA API version does
not send a request to the RSS, it only returns
with success and hard-coded values.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: Ice8d174adf828c1df08fc589f0e17abd1e382a4d
This patch enables access to the branch record buffer control registers
in non-secure EL2 and EL1 using the new build option ENABLE_BRBE_FOR_NS.
It is disabled for all secure world, and cannot be used with ENABLE_RME.
This option is disabled by default, however, the FVP platform makefile
enables it for FVP builds.
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I576a49d446a8a73286ea6417c16bd0b8de71fca0
Makefile updated to use LLVM utilities instead of GNU utilities when
compiling with clang. `CROSS_COMPILE` is not required since this
dependency has been removed.
Change-Id: I19706b84b9310e07935516681b86596c04ef8ad6
Signed-off-by: Harrison Mutai <harrison.mutai@arm.com>
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Upgrade to the latest and greatest 2.x release of Mbed TLS library
(i.e. v2.28.0) to take advantage of their bug fixes.
Note that the Mbed TLS project published version 3.x some time
ago. However, as this is a major release with API breakages, upgrading
to 3.x might require some more involved changes in TF-A, which we are
not ready to do. We shall upgrade to mbed TLS 3.x after the v2.7
release of TF-A.
Change-Id: I887dfd87893169c7be53b986e6c43338d15949d7
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Right now, TF-A documentation recommends downloading Arm compilers
from:
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads
However, this page is now deprecated, as indicated by the banner at
the top of the page. When navigating to the new recommended page, one
can see the following note, which provides the rationale for the
deprecation:
GNU Toolchain releases from Arm were published previously as two
separate releases - one for A-profile and the other for R & M
profiles (GNU Toolchain for A-profile processors and GNU Arm
Embedded Toolchain).
Arm GNU Toolchain releases unifies these two into a single release
and the previous way of releases therefore have been
discontinued. However, the previous releases will continue to be
available for reference.
This patch updates the link to the new recommended place for compiler
downloads.
Change-Id: Iefdea3866a1af806a5db2d2288edbb63c543b8ee
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The current implementation uses plat_arm API under generic code.
"plat_arm" API is a convention used with Arm common platform layer
and is reserved for that purpose. In addition, the function has a
weak definition which is not encouraged in TF-A.
Henceforth, removing the weak API with a configurable macro "TWED_DELAY"
of numeric data type in generic code and simplifying the implementation.
By default "TWED_DELAY" is defined to zero, and the delay value need to
be explicitly set by the platforms during buildtime.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I25cd6f628e863dc40415ced3a82d0662fdf2d75a
Introduce build flag for enabling the secure partition
manager core, SPMC_AT_EL3. When enabled, the SPMC module
will be included into the BL31 image. By default the
flag is disabled.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I5ea1b953e5880a07ffc91c4dea876a375850cf2a
This toolchain provides multiple cross compilers and is publicly
available on developer.arm.com.
We build TF-A in CI using:
AArch32 bare-metal target (arm-none-eabi)
AArch64 ELF bare-metal target (aarch64-none-elf)
Change-Id: Ia14de2c7d9034a6f0bc56535e961fffc81bcbf29
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
Adding the newly introduced build flags for feature enablement of the
following features:
1.FEAT_AMUv1p1 - ENABLE_FEAT_AMUv1p1
2.FEAT_CSV2_2 - ENABLE_FEAT_CSV2_2
3.FEAT_VHE - ENABLE_FEAT_VHE
4.FEAT_DIT - ENABLE_FEAT_DIT
5.FEAT_SB - ENABLE_FEAT_SB
6.FEAT_SEL2 - ENABLE_FEAT_SEL2
Also as part of feature detection mechanism, we now support three
states for each of these features, allowing the flags to take either
(0 , 1 , 2) values. Henceforth the existing feature build options are
converted from boolean to numeric type and is updated accordingly
in this patch.
The build flags take a default value and will be internally enabled
when they become mandatory from a particular architecture version
and upwards. Platforms have the flexibility to overide this
internal enablement via this feature specific explicit build flags.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I0090c8c780c2e7d1a50ed9676983fe1df7a35e50
Add a dummy realm attestation key to RMMD, and return it on request.
The realm attestation key is requested with an SMC with the following
parameters:
* Fid (0xC400001B2).
* Attestation key buffer PA (the realm attestation key is copied
at this address by the monitor).
* Attestation key buffer length as input and size of realm
attesation key as output.
* Type of elliptic curve.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
Change-Id: I12d8d98fd221f4638ef225c9383374ddf6e65eac
Add new options SEPARATE_BL2_NOLOAD_REGION to separate no-loadable
sections (.bss, stack, page tables) to a ram region specified
by BL2_NOLOAD_START and BL2_NOLOAD_LIMIT.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I844ee0fc405474af0aff978d292c826fbe0a82fd
Add a dummy platform token to RMMD and return it on request. The
platform token is requested with an SMC with the following parameters:
* Fid (0xC40001B3).
* Platform token PA (the platform token is copied at this address by
the monitor). The challenge object needs to be passed by
the caller in this buffer.
* Platform token len.
* Challenge object len.
When calling the SMC, the platform token buffer received by EL3 contains
the challenge object. It is not used on the FVP and is only printed to
the log.
Signed-off-by: Mate Toth-Pal <mate.toth-pal@arm.com>
Signed-off-by: Subhasish Ghosh <subhasish.ghosh@arm.com>
Change-Id: I8b2f1d54426c04e76d7a3baa6b0fbc40b0116348
Add a platform hook for returning the boot index, i.e. the bank from
which the platform has booted the updatable firmware images. This
value will be passed to the Update Agent.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: Ic7bef21071c48cfc7b69c50e89df9ff758d95b00
The metadata structure copy is passed to the platform routine to set
the image source to boot the platform from. This is done by reading
the metadata structure. Pass the metadata as a read-only copy to the
routine -- the routine only needs to consume the metadata values and
should not be able to update the metadata fields.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Change-Id: I399cad99ab89c71483e5a32a1de0e22df304f8b0
Measured-Boot and Trusted-Boot are orthogonal to each other and hence
removed dependency of Trusted-Boot on Measured-Boot by making below
changes -
1. BL1 and BL2 main functions are used for initializing Crypto module
instead of the authentication module
2. Updated Crypto module registration macro for MEASURED_BOOT with only
necessary callbacks for calculating image hashes
3. The 'load_auth_image' function is now used for the image measurement
during Trusted or Non-Trusted Boot flow
Change-Id: I3570e80bae8ce8f5b58d84bd955aa43e925d9fff
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
This patch adds macros explicit to the features - FEAT_FGT,FEAT_AMUv1
and FEAT_ECV respectively. It assists in controlled access to the set
of registers (HDFGRTR_EL2, HAFGRTR_EL2 and CNTPOFF_EL2) under the
influence of these features during context save and restore routines.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
Change-Id: I5082ea6687a686d8c5af3fe8bf769957cf3078b0
Added a platform function to measure the critical data and record its
measurement.
Also, corrected a return value of 'plat_mboot_measure_image' function
in the documentation.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I576676f654e517c2010ca1d5a87a1f7277d581c3
