Allows to select the chain of trust to use when the Trusted Boot feature
is enabled. This affects both the cert_create tool and the firmware
itself.
Right now, the only available CoT is TBBR.
Change-Id: I7ab54e66508a1416cb3fcd3dfb0f055696763b3d
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
This patch adds 'calc_hash' function using Mbed TLS library
required for Measured Boot support.
Change-Id: Ifc5aee0162d04db58ec6391e0726a526f29a52bb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This implementation simply mimics that of BL31.
Change-Id: Ibbaa4ca012d38ac211c52b0b3e97449947160e07
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This implementation simply mimics that of BL31.
I did not implement the ENABLE_PIE support for BL2_IN_XIP_MEM=1 case.
It would make the linker script a bit uglier.
Change-Id: If3215abd99f2758dfb232e44b50320d04eba808b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Some platforms are extremely memory constrained and must split BL31
between multiple non-contiguous areas in SRAM. Allow the NOBITS
sections (.bss, stacks, page tables, and coherent memory) to be placed
in a separate region of RAM from the loaded firmware image.
Because the NOBITS region may be at a lower address than the rest of
BL31, __RW_{START,END}__ and __BL31_{START,END}__ cannot include this
region, or el3_entrypoint_common would attempt to invalidate the dcache
for the entire address space. New symbols __NOBITS_{START,END}__ are
added when SEPARATE_NOBITS_REGION is enabled, and the dcached for the
NOBITS region is invalidated separately.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Idedfec5e4dbee77e94f2fdd356e6ae6f4dc79d37
The Secure Partition Manager (SPM) prototype implementation is
being removed. This is preparatory work for putting in place a
dispatcher component that, in turn, enables partition managers
at S-EL2 / S-EL1.
This patch removes:
- The core service files (std_svc/spm)
- The Resource Descriptor headers (include/services)
- SPRT protocol support and service definitions
- SPCI protocol support and service definitions
Change-Id: Iaade6f6422eaf9a71187b1e2a4dffd7fb8766426
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
There are two different implementations of Secure Partition
management in TF-A. One is based on the "Management Mode" (MM)
design, the other is based on the Secure Partition Client Interface
(SPCI) specification. Currently there is a dependency between their
build flags that shouldn't exist, making further development
harder than it should be. This patch removes that
dependency, making the two flags function independently.
Before: ENABLE_SPM=1 is required for using either implementation.
By default, the SPCI-based implementation is enabled and
this is overridden if SPM_MM=1.
After: ENABLE_SPM=1 enables the SPCI-based implementation.
SPM_MM=1 enables the MM-based implementation.
The two build flags are mutually exclusive.
Note that the name of the ENABLE_SPM flag remains a bit
ambiguous - this will be improved in a subsequent patch. For this
patch the intention was to leave the name as-is so that it is
easier to track the changes that were made.
Change-Id: I8e64ee545d811c7000f27e8dc8ebb977d670608a
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Provide an SMC interface to the 9p filesystem. This permits
accessing firmware drivers through a common interface, using
standardized read/write/control operations.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: I9314662314bb060f6bc02714476574da158b2a7d
Sphinx was showing the following warning message:
docs/getting_started/build-options.rst:200: WARNING: Bullet list ends
without a blank line; unexpected unindent.
Change-Id: Iad5d49c1e0d25dd623ad15bce1af31babf860c03
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Add the support needed to enable using CryptoCell integration with
with RSA 3K support.
Signed-off-by: Gilad Ben-Yossef <gilad.benyossef@arm.com>
Change-Id: I95527cb0c41ae012109e8968dd20a4ae9fe67f17
This patch enables LTO for TF-A when compiled with GCC.
LTO is disabled by default and is enabled by
ENABLE_LTO=1 build option.
LTO is enabled only for aarch64 as there seem to be
a bug in the aarch32 compiler when LTO is enabled.
The changes in the makefiles include:
- Adding -flto and associated flags to enable LTO.
- Using gcc as a wrapper at link time instead of ld.
This is recommended when using LTO as gcc internally
takes care of invoking the necessary plugins for LTO.
- Adding switches to pass options to ld.
- Adding a flag to disable fix for erratum cortex-a53-843419
unless explicitly enabled. This is needed because GCC
seem to automatically add the erratum fix when used
as a wrapper for LD.
Additionally, this patch updates the TF-A user guide with
the new build option.
Signed-off-by: zelalem-aweke <zelalem.aweke@arm.com>
Change-Id: I1188c11974da98434b7dc9344e058cd1eacf5468
The User Guide document has grown organically over time and
now covers a wide range of topics, making it difficult to
skim read and extract information from. Currently, it covers
these topics and maybe a couple more:
- Requirements (hardware, tools, libs)
- Checking out the repo
- Basic build instructions
- A comprehensive list of build flags
- FIP packaging
- Building specifically for Juno
- Firmware update images
- EL3 payloads
- Preloaded BL33 boot flow
- Running on FVPs
- Running on Juno
I have separated these out into a few groups that become new
documents. Broadly speaking, build instructions for the tools,
for TF-A generally, and for specific scenarios are separated.
Content relating to specific platforms (Juno and the FVPs are
Arm-specific platforms, essentially) has been moved into the
documentation that is specific to those platforms, under
docs/plat/arm.
Change-Id: Ica87c52d8cd4f577332be0b0738998ea3ba3bbec
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
