Instead of using dt_get_ddr_size() and withdrawing the secure and shared
memory areas, use stm32mp_get_ddr_ns_size() function.
Change-Id: I5608fd7873589ea0e1262ba7d2ee3e52b53d9a7d
Signed-off-by: Yann Gautier <yann.gautier@st.com>
DTB and BL32 area should not be set as executable in MMU during BL2
execution, hence set those areas as MT_RO_DATA.
Change-Id: I87c47a1e7fda761e541ec98a5b294588384d31db
Signed-off-by: Yann Gautier <yann.gautier@st.com>
A speculative accesses to DDR could be done whereas it was not reachable
and could lead to bus stall.
To correct this the dynamic mapping in MMU is used.
A first mapping is done for DDR tests with MT_NON_CACHEABLE attribute,
once DDR access is setup. It is then unmapped and a new mapping DDR is done
with cacheable attribute (through MT_MEMORY) to speed-up BL33 (or OP-TEE)
load.
The disabling of cache during DDR tests is also removed, as now useless.
A call to new functions stm32mp_{,un}map_ddr_non_cacheable() is done
instead.
PLAT_XLAT_TABLES_DYNAMIC is activated globally as used in BL2 and BL32.
BL33 max size is also updated to take into account the secure and shared
memory areas. Those are used in OP-TEE case.
Change-Id: I22c48b4a48255ee264991c34ecbb15bfe87e67c3
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This function gets the DDR size from DT, and withdraws (if defined) the
sizes of secure DDR and shared memory areas.
This function also checks DT values fits the default DDR range.
This non-secure memory is available for BL33 and non-secure OS.
Change-Id: I162ae5e990a0f9b6b7d07e539de029f1d61a391b
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This patch increases the maximum timeout value for SE operation
completion to 1 second. This takes care of some corner cases where
an operation might take more time than the previous timeout value
of 100ms.
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Change-Id: I0012448ba372a8bb0e156df7dfe49d7de6d21a68
When SPD=spmd and SPMD_SPM_AT_SEL2=0, that is SPMC sits at S-EL1
then there is no need for TF-A to load secure partitions individually.
In this configuration, SPMC handles secure partition loading at
S-EL1/EL0 levels.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: I06a0d88a4811274a8c347ce57b56bb5f64e345df
This warning was issued by cppcheck in our downstream code:
[plat/st/common/stm32mp_dt.c:629] -> [plat/st/common/stm32mp_dt.c:634]:
(warning) Identical condition 'node<0', second condition is always false
The second test has to check variable pwr_regulators_node.
Change-Id: I4a20c4a3ac0ef0639c2df36309d90a61c02b511f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Correct the following sparse warnings:
plat/st/common/stm32mp_dt.c:103:5: warning:
symbol 'fdt_get_node_parent_address_cells' was not declared.
Should it be static?
plat/st/common/stm32mp_dt.c:123:5: warning:
symbol 'fdt_get_node_parent_size_cells' was not declared.
Should it be static?
As those 2 functions are only used by assert(), put them under
ENABLE_ASSERTIONS flag.
Change-Id: Iad721f12128df83a3de3f53e7920a9c1dce64c56
Signed-off-by: Yann Gautier <yann.gautier@st.com>
* changes:
Tegra194: move cluster and CPU counter to header file.
Tegra: gicv2: initialize target masks
spd: tlkd: support new TLK SMCs for RPMB service
Tegra210: trigger CPU0 hotplug power on using FC
Tegra: memctrl: cleanup streamid override registers
Tegra: memctrl_v2: remove support to secure TZSRAM
Tegra: include platform headers from individual makefiles
Tegra210: rename ENABLE_WDT_LEGACY_FIQ_HANDLING macro
Tegra194: SiP function ID to read SMMU_PER registers
Tegra: memctrl: map video memory as uncached
Tegra: remove support for USE_COHERENT_MEM
Tegra: remove circular dependency with common_def.h
Tegra: include missing stdbool.h
Tegra: remove support for SEPARATE_CODE_AND_RODATA=0
The base address for both the GPIO and the clock unit of the H6 memory map
have been typo-ed. Fix them to match the Linux DT and the manual.
The H6 code use neither of them, so this doesn't change or fix anything
in the real world, but should be corrected anyway.
The issue was found and reported by Github user "armlabs".
Change-Id: Ic6fdfb732ce1cfc54cbb927718035624a06a9e08
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
MISRA rules request that the cluster and CPU counter be unsigned
values and have a suffix 'U'. If the define located in the makefile,
this cannot be done.
This patch moves the PLATFORM_CLUSTER_COUNT and PLATFORM_MAX_CPUS_PER_CLUSTER
macros to tegra_def.h as a result.
Change-Id: I9ef0beb29485729de204b4ffbb5241b039690e5a
Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
This patch initializes the target masks in the GICv2 driver
data, for all PEs. This will allow platforms to set the PE
target for SPIs.
Change-Id: I7bf2ad79c04c2555ab310acba17823fb157327a3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Hotplug poweron is not working for boot CPU as it's being
triggerred using PMC and not with Flow Controller. This is
happening because "cpu_powergate_mask" is only getting set
for non-boot CPU's as the boot CPU's first bootup follows
different code path. The patch is marking a CPU as ON within
"cpu_powergate_mask" when turning its power domain on
during power on. This will ensure only first bootup on all
CPU's is using PMC and subsequent hotplug poweron will be
using Flow Controller.
Change-Id: Ie9e86e6f9a777d41508a93d2ce286f31307932c2
Signed-off-by: sumitg <sumitg@nvidia.com>
Streamid override registers are passed to memctrl to program bypass
streamid for all the registers. There is no reason to bypass SMMU
for any of the client so need to remove register list and do not
set streamid_override_cfg.
Some Tegra186 platforms don't boot due to SDMMC failure so keep SDMMC
bypass as of now. Will revisit once these issues are fixed.
Change-Id: I3f67e2a0e1b53160e2218f3acace7da45532f934
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
This patch removes support to secure the on-chip TZSRAM memory for
Tegra186 and Tegra194 platforms as the previous bootloader does that
for them.
Change-Id: I50c7b7f9694285fe31135ada09baed1cfedaaf07
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch modifies PLAT_INCLUDES to include individual Tegra SoC
headers from the platform's makefile.
Change-Id: If5248667f4e58ac18727d37a18fbba8e53f2d7b5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch renames 'ENABLE_WDT_LEGACY_FIQ_HANDLING' macro to
'ENABLE_TEGRA_WDT_LEGACY_FIQ_HANDLING', to indicate that this
is a Tegra feature.
Change-Id: I5c4431e662223ee80efbfd5ec2513f8b1cadfc50
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch introduces SiP function ID, 0xC200FF00, to read SMMU_PER
error records from all supported SMMU blocks.
The register values are passed over to the client via CPU registers
X1 - X3, where
X1 = SMMU_PER[instance #1] | SMMU_PER[instance #0]
X2 = SMMU_PER[instance #3] | SMMU_PER[instance #2]
X3 = SMMU_PER[instance #5] | SMMU_PER[instance #4]
Change-Id: Id56263f558838ad05f6021f8432e618e99e190fc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Memmap video memory as uncached normal memory by adding flag
'MT_NON_CACHEABLE' in mmap_add_dynamic_region().
This improves the time taken for clearing the non-overlapping video
memory:
test conditions: 32MB memory size, EMC running at 1866MHz, t186
1) without MT_NON_CACHEABLE: 30ms ~ 40ms
<3>[ 133.852885] vpr-heap: update vpr base to 0x00000000c6000000, size=e000000
<3>[ 133.860471] _tegra_set_vpr_params[120]: begin
<3>[ 133.896481] _tegra_set_vpr_params[123]: end
<3>[ 133.908944] vpr-heap: update vpr base to 0x00000000c6000000, size=c000000
<3>[ 133.916397] _tegra_set_vpr_params[120]: begin
<3>[ 133.956369] _tegra_set_vpr_params[123]: end
<3>[ 133.970394] vpr-heap: update vpr base to 0x00000000c6000000, size=a000000
<3>[ 133.977934] _tegra_set_vpr_params[120]: begin
<3>[ 134.013874] _tegra_set_vpr_params[123]: end
<3>[ 134.025666] vpr-heap: update vpr base to 0x00000000c6000000, size=8000000
<3>[ 134.033512] _tegra_set_vpr_params[120]: begin
<3>[ 134.065996] _tegra_set_vpr_params[123]: end
<3>[ 134.075465] vpr-heap: update vpr base to 0x00000000c6000000, size=6000000
<3>[ 134.082923] _tegra_set_vpr_params[120]: begin
<3>[ 134.113119] _tegra_set_vpr_params[123]: end
<3>[ 134.123448] vpr-heap: update vpr base to 0x00000000c6000000, size=4000000
<3>[ 134.130790] _tegra_set_vpr_params[120]: begin
<3>[ 134.162523] _tegra_set_vpr_params[123]: end
<3>[ 134.172413] vpr-heap: update vpr base to 0x00000000c6000000, size=2000000
<3>[ 134.179772] _tegra_set_vpr_params[120]: begin
<3>[ 134.209142] _tegra_set_vpr_params[123]: end
2) with MT_NON_CACHEABLE: 10ms ~ 18ms
<3>[ 102.108702] vpr-heap: update vpr base to 0x00000000c6000000, size=e000000
<3>[ 102.116296] _tegra_set_vpr_params[120]: begin
<3>[ 102.134272] _tegra_set_vpr_params[123]: end
<3>[ 102.145839] vpr-heap: update vpr base to 0x00000000c6000000, size=c000000
<3>[ 102.153226] _tegra_set_vpr_params[120]: begin
<3>[ 102.164201] _tegra_set_vpr_params[123]: end
<3>[ 102.172275] vpr-heap: update vpr base to 0x00000000c6000000, size=a000000
<3>[ 102.179638] _tegra_set_vpr_params[120]: begin
<3>[ 102.190342] _tegra_set_vpr_params[123]: end
<3>[ 102.197524] vpr-heap: update vpr base to 0x00000000c6000000, size=8000000
<3>[ 102.205085] _tegra_set_vpr_params[120]: begin
<3>[ 102.216112] _tegra_set_vpr_params[123]: end
<3>[ 102.224080] vpr-heap: update vpr base to 0x00000000c6000000, size=6000000
<3>[ 102.231387] _tegra_set_vpr_params[120]: begin
<3>[ 102.241775] _tegra_set_vpr_params[123]: end
<3>[ 102.248825] vpr-heap: update vpr base to 0x00000000c6000000, size=4000000
<3>[ 102.256069] _tegra_set_vpr_params[120]: begin
<3>[ 102.266368] _tegra_set_vpr_params[123]: end
<3>[ 102.273400] vpr-heap: update vpr base to 0x00000000c6000000, size=2000000
<3>[ 102.280672] _tegra_set_vpr_params[120]: begin
<3>[ 102.290929] _tegra_set_vpr_params[123]: end
Change-Id: I5f604064ce7b8b73ea9ad5860156ae5e2c6cc42a
Signed-off-by: Ken Chang <kenc@nvidia.com>
This patch removes the support for 'USE_COHERENT_MEM' as
Tegra platforms no longer support the feature.
Change-Id: If1c80fc4e5974412572b3bc1fdf9e70b1ee5d4ec
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
This patch stops including common_def.h from platform_def.h to
fix a circular depoendency between them.
This means platform_def.h now has to define the linker macros:
* PLATFORM_LINKER_FORMAT
* PLATFORM_LINKER_ARCH
Change-Id: Icd540b1bd32fb37e0e455e9146c8b7f4b314e012
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch includes the missing stdbool.h header from flowctrl.h
and bpmp_ivc.c files.
Change-Id: If60d19142b1cb8ae663fbdbdf1ffe45cbbdbc1b2
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Tegra platforms will not be supporting SEPARATE_CODE_AND_RODATA=0.
This patch uses the common macros provided by bl_common.h as a result
and adds a check to assert if SEPARATE_CODE_AND_RODATA set is not set
to '1'.
Change-Id: I376ea60c00ad69cb855d89418bdb80623f14800e
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
To demonstrate communication between SP's two instances of Cactus at
S-EL1 has been used.
This patch replaces Ivy SP with cactus-secondary SP which aligns with
changes in tf-a-tests repository.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Iee84f1f7f023b7c4f23fbc13682a42614a7f3707
When using the SPM Dispatcher, the SPMC sits as a BL32 component
(BL32_IMAGE_ID). The SPMC manifest is passed as the TOS fw config
component (TOS_FW_CONFIG_ID). It defines platform specific attributes
(memory range and physical CPU layout) as well as the attributes for
each secure partition (mostly load address). This manifest is passed
to the SPMC on boot up. An SP package contains the SP dtb in the SPCI
defined partition manifest format. As the SPMC manifest was enriched
it needs an increase of tos_fw-config max-size in fvp_fw_config dts.
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Change-Id: Ia1dce00c6c4cbaa118fa56617980d32e2956a94e
The 'plat_core_pos_by_mpidr' handler gets called very early during boot
and the compiler generated code overwrites the caller's registers.
This patch converts the 'plat_core_pos_by_mpidr' handler into an assembly
function and uses registers x0-x3, to fix this anomaly.
Change-Id: I8d974e007a0bad039defaf77b11a180d899ead3c
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
We set deepest power state when offlining a core but that may not be
requested by non-secure sw which controls idle states. It will re-init
this info from non-secure software when the core come online.
This patch resets the power state in the non-secure world context
to allow it to start with a clean slate.
Change-Id: Iafd92cb2a49571aa6eeb9580beaaff4ba55a87dc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
TZSRAM loses power during System suspend, so the entire contents
are copied to TZDRAM before Sysem Suspend entry. The warmboot code
verifies and restores the contents to TZSRAM during System Resume.
This patch removes the code that sets up CPU vector to point to
TZSRAM during System Resume as a result. The trampoline code can
also be completely removed as a result.
Change-Id: I2830eb1db16efef3dfd96c4e3afc41a307588ca1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch disables the code to program reset vector for secondary
CPUs to a different entry point, than cold boot. The cold boot entry
point has the ability to differentiate between a cold boot and a warm
boot, that is controlled by the PROGRAMMABLE_RESET_ADDRESS macro. By
reusing the same entry point, we can lock the CPU reset vector during
cold boot.
Change-Id: Iad400841d57c139469e1d29b5d467197e11958c4
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
In SE suspend, switch SE clock source to CLK_M,
to make sure SE clock is on when saving SE context
Change-Id: I57c559825a3ec8e0cc35f7a389afc458a5eed0cb
Signed-off-by: Leo He <leoh@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch increases the assert logging level for all Tegra platforms
to VERBOSE, to print the actual assertion condition to the console,
improving debuggability.
Change-Id: If3399bde63fa4261522cab984cc9c49cd2073358
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch enables dual execution optimized translations for EL2 and EL3
CPU exception levels.
Change-Id: I28fe98bb05687400f247e94adf44a1f3a85c38b1
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
This patch updates 'plat_my_core_pos' handler to call
'plat_core_pos_from_mpidr' instead of implementing the same logic
at two places.
Change-Id: I1e56adaa10dc2fe3440e5507e0e260d8932e6657
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
This patch updates the t194_nvg.h header file received from the CPU
team to v6.7.
Change-Id: I5d25dfc60448e14b7085250946bd002fcb80a774
Signed-off-by: Kalyani Chidambaram <kalyanic@nvidia.com>
* changes:
rpi: docs: Update maintainers file to new RPi directory scheme
rpi: console: Autodetect Mini-UART vs. PL011 configuration
rpi3: build: Include GPIO driver in all BL stages
rpi: Allow using PL011 UART for RPi3/RPi4
rpi3: console: Use same "clock-less" setup scheme as RPi4
rpi3: gpio: Simplify GPIO setup
Rather than creating entry in plat_arm_mmap array to map the
entire DRAM region in BL31/SP_MIN, only map a smaller region holding
HW_CONFIG DTB. Consequently, an increase in number of sub-translation
tables(level-2 and level-3) i.e., MAX_XLAT_TABLES is necessary to map
the new region in memory.
In order to accommodate the increased code size in BL31 i.e.,
PROGBITS, the max size of BL31 image is increased by 0x1000(4K).
Change-Id: I540b8ee550588e22a3a9fb218183d2ab8061c851
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
The Raspberry Pi has two different UART devices pin-muxed to GPIO 14&15:
One ARM PL011 one and the 8250 compatible "Mini-UART".
A dtoverlay parameter in config.txt will tell the firmware to switch
between the two: it will setup the right clocks and will configure the
pinmuxes accordingly.
To autodetect the user's choice, we read the pinmux register and check
its setting: ALT5 (0x2) means the Mini-UART is used, ALT0 (0x4) points
to the PL011.
Based on that we select the UART driver to initialise.
This will allow console output in any case.
Change-Id: I620d3ce68de6c6576599f2a405636020e1fd1376
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
