Since the introduction of the toolchain detection framework into the
build system, we have done determination and identification of the
toolchain(s) used for the build at the initialization of the build
system.
This incurs a large cost to the build every time - for every toolchain
that has been requested by the current makefile, we try to identify each
tool in the list of known tool classes, even if that tool doesn't
actually see any use.
For the clean and check-like targets we worked around this by disabling
most of the toolchains if we detect these targets, but this is
inflexible and not very reliable, and it still means that when building
normal targets we are incurring that cost for all tools whether they are
used or not.
This change instead modifies the toolchain detection framework to only
initialize a tool for a given toolchain when it is first used. This does
mean that we can no longer warn about an incorrectly-configured
toolchain at the beginning of build system invocation, but it has the
advantage of substantially reducing build time and the complexity of
*using* the framework (at the cost of an increase in complexity in the
framework itself).
Change-Id: I7f3d06b2eb58c1b26a846791a13b0037f32c8013
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change avoids generating a build message source file on the shell,
instead using the `__DATE__` and `__TIME__` macros directly.
Change-Id: Ieda75bbac174847c716701bce8dd10b8e9975902
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.
The `silent` and `verbose` variables are boolean values determining
whether the build system has been configured to run silently or
verbosely respectively (i.e. with `--silent` or `V=1`).
These two modes cannot be used together - if `silent` is truthy then
`verbose` is always falsy. As such:
make --silent V=1
... results in a silent build.
In addition to these boolean variables, we also introduce two new
variables - `s` and `q` - for use in rule recipes to conditionally
suppress the output of commands.
When building silently, `s` expands to a value which disables the
command that follows, and `q` expands to a value which supppresses
echoing of the command:
$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed but not echoed'
When building verbosely, `s` expands to a value which disables the
command that follows, and `q` expands to nothing:
$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed and echoed'
In all other cases, both `s` and `q` expand to a value which suppresses
echoing of the command that follows:
$(s)echo 'This command is executed but not echoed'
$(q)echo 'This command is executed but not echoed'
The `s` variable is predominantly useful for `echo` commands, where you
always want to suppress echoing of the command itself, whilst `q` is
more useful for all other commands.
Change-Id: I8d8ff6ed714d3cb401946c52955887ed7dca602b
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change migrates the values of `CC`, `CPP`, `AS` and other toolchain
variables to the new `$(toolchain)-$(tool)` variables, which were
introduced by the toolchain refactor patch. These variables should be
equivalent to the values that they're replacing.
Change-Id: I644fe4ce82ef1894bed129ddb4b6ab94fb04985d
Signed-off-by: Chris Kay <chris.kay@arm.com>
This change refactors how we identify the toolchain, with the ultimate
aim of eventually cleaning up the various mechanisms that we employ to
configure default tools, identify the tools in use, and configure
toolchain flags.
To do this, we introduce three new concepts in this change:
- Toolchain identifiers,
- Tool class identifiers, and
- Tool identifiers.
Toolchain identifiers identify a configurable chain of tools targeting
one platform/machine/architecture. Today, these are:
- The host machine, which receives the `host` identifier,
- The AArch32 architecture, which receives the `aarch32` identifier, and
- The AArch64 architecture, which receivs the `aarch64` identifier.
The tools in a toolchain may come from different vendors, and are not
necessarily expected to come from one single toolchain distribution. In
most cases it is perfectly valid to mix tools from different toolchain
distributions, with some exceptions (notably, link-time optimization
generally requires the compiler and the linker to be aligned).
Tool class identifiers identify a class (or "role") of a tool. C
compilers, assemblers and linkers are all examples of tool classes.
Tool identifiers identify a specific tool recognized and supported by
the build system. Every tool that can make up a part of a toolchain must
receive a tool identifier.
These new identifiers can be used to retrieve information about the
toolchain in a more standardized fashion.
For example, logic in a Makefile that should only execute when the C
compiler is GNU GCC can now check the tool identifier for the C compiler
in the relevant toolchain:
ifeq ($($(ARCH)-cc-id),gnu-gcc)
...
endif
Change-Id: Icc23e43aaa32f4fd01d8187c5202f5012a634e7c
Signed-off-by: Chris Kay <chris.kay@arm.com>
In their respective makefiles, cert_create, encrypt_fw and fiptool
depend on the --openssl phony target as a prerequisite. This forces
those tools to be re-linked each time.
Move the dependencies on the --openssl target from the tools to their
makefiles all targets, to avoid unnecessary linking while preserving the
OpenSSL version printing done in the --openssl targets when in debug.
Fixes: cf2dd17ddd ("refactor(security): add OpenSSL 1.x compatibility")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Change-Id: I98a3ab30f36dffc253cecaaf3a57d2712522135d
When updated to work with OpenSSL 3.0, the host tools lost their
compatibility with previous versions (1.x) of OpenSSL. This is
mainly due to the fact that 1.x APIs became deprecated in 3.0 and
therefore their use cause compiling errors. In addition, updating
for a newer version of OpenSSL meant improving the stability
against security threats. However, although version 1.1.1 is
now deprecated, it still receives security updates, so it would
not imply major security issues to keep compatibility with it too.
This patch adds backwards compatibility with OpenSSL 1.x versions
by adding back 1.x API code. It defines a macro USING_OPENSSL3,
which will select the appropriate OpenSSL API version depending on
the OpenSSL library path chosen (which is determined by the
already-existing OPENSSL_DIR variable).
In addition, cleanup items were packed in functions and moved to
the proper modules in order to make the code more maintainable and
legible.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I8deceb5e419edc73277792861882404790ccd33c
Selection of the cca chain of trust is done through the COT build
option:
> make COT=cca
Signed-off-by: Lauren Wehrmeister <lauren.wehrmeister@arm.com>
Change-Id: I123c0a841f67434633a3123cc1fa3e2318585482
Host tools cert_tool and encrypt_fw refactored to be fully
compatible with OpenSSL v3.0.
Changes were made following the OpenSSL 3.0 migration guide:
https://www.openssl.org/docs/man3.0/man7/migration_guide.html
In some cases, those changes are straightforward and only
a small modification on the types or API calls was needed
(e.g.: replacing BN_pseudo_rand() with BN_rand(). Both identical
since v1.1.0).
The use of low level APIs is now deprecated. In some cases,
the new API provides a simplified solution for our goals and
therefore the code was simplified accordingly (e.g.: generating
RSA keys through EVP_RSA_gen() without the need of handling the
exponent). However, in some cases, a more
sophisticated approach was necessary, as the use of a context
object was required (e.g.: when retrieving the digest value from
an SHA file).
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: I978e8578fe7ab3e71307450ebe7e7812fbcaedb6
Changes to 'tools/cert_create' folder, to include platform defined
certificates, keys, and extensions.
NXP SoC lx2160a : based platforms requires additional
FIP DDR to be loaded before initializing the DDR.
To enable chain of trust on these platforms, FIP DDR
image needs to be authenticated, additionally.
Platform specific folder 'tools/nxp/cert_create_helper'
is added to support platform specific macros and definitions.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I4752a30a9ff3aa1d403e9babe3a07ba0e6b2bf8f
Don't depend on clean when building, as the user is capable of cleaning
if required and this introduces a race where "all" depends on both the
compile and the clean in parallel. It's quite possible for some of the
compile to happen in parallel with the clean, which results in the link
failing as objects just built are missing.
Change-Id: I710711eea7483cafa13251c5d94ec693148bd001
Signed-off-by: Ross Burton <ross.burton@arm.com>
This patch: fafd3ec9c assumes that tools must build from
the main makefile folder.
This assumption leads to the error when somebody wants to
build a tool from the tool's folder.
Hence changes are done to provide the default binary name
in the tool's makefile.
Change-Id: Iae570a7f8d322151376b6feb19e739300eecc3fc
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Currently, the tool's makefile override the tool's binary name
which is already been defined in the main makefile.
Hence fix is provided so that the tool's makefile get the tool's
binary name from the main makefile instead of overriding it.
Change-Id: I8af2bd391a96bba2dbcddef711338a94ebf5f038
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Selection of the chain of trust is done through the COT build option:
> make COT=dualroot
Change-Id: Id87c7a5116bdd13bdb29645ecf31d111ad094c1e
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
It allows to select the desired chain of trust. Right now, only the TBBR
CoT is available.
At this stage, this build option only affects the tool itself. It is not
plugged into the rest of the build system yet. To use it:
> make -C tools/cert_create COT=tbbr
Change-Id: I4484418f76d3c7b330d8653c978499a181534dcd
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Move all TBBR-specific stuff out of the tool's makefile into a
sub-makefile. This will make it easier to define and select an alternate
chain of trust in the future.
Change-Id: I92e366a1999b74cf51127d1771b64b807cd94b29
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
HOSTCC should be used in any of the tools inside the tools/ directory
instead of CC. That way it is possible to override both values from the
command line when building the Trusted Firmware and the tools at the
same time. Also, use HOSTCCFLAGS instead of CFLAGS.
Also, instead of printing the strings CC and LD in the console during
the compilation of the tools, HOSTCC and HOSTLD have to be used for
clarity. This is how it is done in other projects like U-Boot or Linux.
Change-Id: Icd6f74c31eb74cdd1c353583399ab19e173e293e
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Spurious whitespace existed in the BINARY shell variable which meant
the cert_tool executable was not being removed on 'make realclean'.
Change-Id: Ibfd2fd17889514f6613e33c6df58d53b9232ec14
Signed-off-by: Jonathan Wright <jonathan.wright@arm.com>
Since we use "?=" to set PLATFORM_ROOT, it is better to change the
name to be more special, or else it may be overridden by some
environment variables, such as in some CI build environments.
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Using the OIDs defined in tbbr_oids.h is the recommended way to build
the cert_create tool. This patch hence sets default value of the build
flag USE_TBBR_DEFS to 1 in the Makefile in `tools/cert_create` folder
when cert_create is built from this folder.
FixesARM-software/tf-issues#482
Change-Id: Id1d224826b3417770bccbefa1b68d9bdb3b567f0
Signed-off-by: Soby Mathew <soby.mathew@arm.com>
When V is set from the command line, the value is passed to the tools'
Makefiles as well.
Change-Id: I91a1f66de5c1ae6f36b6c9f0a9bd550d4a30f092
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Tools are built using the compiler specified in `HOSTCC` instead of
reusing the `CC` variable. By default, gcc is used.
Change-Id: I83636a375c61f4804b4e80784db9d061fe20af87
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Platforms aligned with TBBR are supposed to use their own OIDs, but
defining the same macros with different OIDs does not provide any
value (at least technically).
For easier use of TBBR, this commit allows platforms to reuse the OIDs
obtained by ARM Ltd. This will be useful for non-ARM vendors that
do not need their own extension fields in their certificate files.
The OIDs of ARM Ltd. have been moved to include/tools_share/tbbr_oid.h
Platforms can include <tbbr_oid.h> instead of <platform_oid.h> by
defining USE_TBBR_DEFS as 1. USE_TBBR_DEFS is 0 by default to keep the
backward compatibility.
For clarification, I inserted a blank line between headers from the
include/ directory (#include <...>) and ones from a local directory
(#include "..." ).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.
NOTE: Files that have been imported by FreeBSD have not been modified.
[0]: https://spdx.org/
Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
In some build environments executable programs have a specific file
extension. The value of BIN_EXT is appended to the relevant tool file
names to allow for this.
The value of BIN_EXT is set, where appropriate, by the build environment
specific make helper (to .exe for Windows build environments).
.gitignore is updated to hide the new (.exe) files.
Change-Id: Icc32f64b750e425265075ad4e0dea18129640b86
Add make helper files to select the appropriate settings for the build
environment. Selection is made in make_helpers/build_env.mk, which
selects other files to include using generic build environment settings.
The Trusted Firmware Makefile and supporting tool Makefiles are updated
to include build_env.mk instead of unix.mk.
NOTE: This change does not fully enable builds in other build
environments. It facilitates this without compromising the
existing build environments.
Change-Id: Ic4064ffe6ce158bbd16d7cc9f27dd4655a3580f6
Macros are inserted to replace direct invocations of commands that are
problematic on some build environments. (e.g. Some environments expect
\ in paths instead of /.)
The changes take into account mismatched command mappings across
environments.
The new helper file unix.mk retains existing makefile behaviour on unix
like build environments by providing the following macro definitions:
SHELL_COPY cp -f
SHELL_COPY_TREE cp -rf
SHELL_DELETE rm -f
SHELL_DELETE_ALL rm -rf
MAKE_PREREQ_DIR mkdir -p (As make target)
SHELL_REMOVE_DIR rm -rf
Change-Id: I1b5ca5e1208e78230b15284c4af00c1c006cffcb
As an initial stage of making Trusted Firmware build environment more
portable, we remove most uses of the $(shell ) function and replace them
with more portable make function based solutions.
Note that the setting of BUILD_STRING still uses $(shell ) since it's
not possible to reimplement this as a make function. Avoiding invocation
of this on incompatible host platforms will be implemented separately.
Change-Id: I768e2f9a265c78814a4adf2edee4cc46cda0f5b8
This patch introduces a new API that allows to specify command
line options in the Chain of Trust description. These command line
options may be used to specify parameters related to the CoT (i.e.
keys or certificates), instead of keeping a hardcoded list of
options in main.c.
Change-Id: I282b0b01cb9add557b26bddc238a28253ce05e44
This patch reworks the certificate generation tool to follow a data
driven approach. The user may specify at build time the certificates,
keys and extensions defined in the CoT, register them using the
appropiate macros and the tool will take care of creating the
certificates corresponding to the CoT specified.
Change-Id: I29950b39343c3e1b71718fce0e77dcf2a9a0be2f
This patch extends the 'cert_create' tool to support ECDSA keys
to sign the certificates. The '--key-alg' command line option
can be used to specify the key algorithm when invoking the tool.
Available options are:
* 'rsa': create RSA-2048 keys (default option)
* 'ecdsa': create ECDSA-SECP256R1 keys
The TF Makefile has been updated to allow the platform to specify
the key algorithm by declaring the 'KEY_ALG' variable in the
platform makefile.
The behaviour regarding key management has changed. After applying
this patch, the tool will try first to open the keys from disk. If
one key does not exist or no key is specified, and the command line
option to create keys has been specified, new keys will be created.
Otherwise an error will be generated and the tool will exit. This
way, the user may specify certain keys while the tool will create
the remaining ones. This feature is useful for testing purposes
and CI infrastructures.
The OpenSSL directory may be specified using the build option
'OPENSSL_DIR' when building the certificate generation tool.
Default is '/usr'.
Change-Id: I98bcc2bfab28dd7179f17f1177ea7a65698df4e7
Update the top level makefile to allow platform ports to exist in
subdirectories at any level instead of one level under `plat/`. The
makefile recursively searches for all files called `platform.mk` in
all subdirectories of `plat/`. The directory containing
`platform.mk` is the platform name. Platform names must be unique
across the codebase.
Replace usage of HELP_PLATFORMS in the Makefile with PLATFORMS since
these are both used to report the same information back to the user.
Update the TSP and cert_create tool makefiles in a similar way
to support a deeper platform port directory structure.
Also add PLAT_<plat_name> as a define passed through the top level
makefile to the source files, to allow build time variation in common
platform code.
Change-Id: I213420164808c5ddb99a26144e8e3f141a7417b7
This patch adds a tool that generates all the necessary elements
to establish the chain of trust (CoT) between the images.
The tool reads the binary images and signing keys and outputs the
corresponding certificates that will be used by the target at run
time to verify the authenticity of the images.
Note: the platform port must provide the file platform_oid.h. This
file will define the OIDs of the x509 extensions that will be added
to the certificates in order to establish the CoT.
Change-Id: I2734d6808b964a2107ab3a4805110698066a04be
