This feature is enabled by default using STM32MP_DDR_FIP_IO_STORAGE.
DDR firmware binary is loaded from FIP to SRAM1 which needs to be
mapped.
Only half of the SRAM1 will be allocated to TF-A.
RISAB3 has to be configured to allow access to SRAM1.
Add image ID and update maximum number on platform side also.
Fill related descriptor information, add policy and update numbers.
DDR_TYPE variable is used to identify binary file, and image is now
added in the fiptool command line.
The DDR PHY firmware is not in TF-A repository. It can be found at
https://github.com/STMicroelectronics/stm32-ddr-phy-binary
To ease the selection of the firmware path, STM32MP_DDR_FW_PATH is added
to platform.mk file.
Change-Id: I09ab0a5c63406055a7b5ccd16d65e443de47ca2f
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Add links to official STMicroelectronics documentation (STM32MP2
series presentation and wiki).
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I2fca0da56bc6064c222df34493921dff3e119a22
STM32MP25xA & STM32MP25xC versions run at 1.2GHz.
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: I75aea682c8e3fa89e7ac1347bb7f9d02f2086222
Now that EARLY_CONSOLE is generic, use it instead of the ST flag.
Remove stm32mp_setup_early_console() calls as it is done in common TF-A
code.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Icac29b62a6267303cb5c679d15847c013ead1d23
Recommend OP-TEE as the default BL32 for STMicroelectronics platforms.
SP_MIN is no more supported in STMicroelectronics software [1].
It will then no more receive new features, but should still remain
as it is in the TF-A code.
[1]: https://wiki.st.com/stm32mpu/wiki/STM32_MPU_OpenSTLinux_release_note_-_v5.0.0#TF-A
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ic49338dbba3fdcebcb1e477e6a1dbde32783482b
Due to embedded SRAM used to load BL2 and BL31 or BL32 has a limited
size, only one storage device or serial device flag should be selected
in TF-A build command line for ST platforms.
This is in line with STMicroelectionics recommendation [1] about those
compilation flags.
[1]: https://wiki.st.com/stm32mpu/wiki/How_to_configure_TF-A_BL2#Build_command_details
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I6f6ab17d45d00289989a606d15c143e5710c64ce
STM32MP2x is a new family of microprocessors designed by
STMicroelectronics and based on Arm Cortex-A35.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I741ed0a701a614817a4d0b65d3d6f4e6a79da6a9
In order to ease introduction of new STM32 MPUs platforms, a dedicated
ST sub-menu (and directory) is created.
The old page is kept, but with an orphan parameter to avoid build
issues with the docs, and to avoid listing it in the menu. It is
updated to just have links with the new pages.
A new page STM32 MPUs is created to group common options for all STM32
MPUs.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I799b57967d76a985835c7a3d9d6ab21beb44ba40
