Merge changes from topic "fw_config_handoff" into integration

* changes:
  doc: Update arg usage for BL2 and BL31 setup functions
  doc: Update BL1 and BL2 boot flow
  plat/arm: Use only fw_config between bl2 and bl31

docs/components/fconf/index.rst

@@ -49,8 +49,10 @@ Hence each ``populate()`` function must be registered with a specific
 configuration properties which is usually a device tree file.
 
 Example:
+ - FW_CONFIG: properties related to base address, maximum size and image id
+   of other DTBs etc.
  - TB_FW: properties related to trusted firmware such as IO policies,
-   base address of other DTBs, mbedtls heap info etc.
+   mbedtls heap info etc.
  - HW_CONFIG: properties related to hardware configuration of the SoC
    such as topology, GIC controller, PSCI hooks, CPU ID etc.
 
@@ -88,9 +90,10 @@ explain how the properties are described for a specific backend. Refer to the
 Loading the property device tree
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-The ``fconf_load_config()`` must be called to load the device tree containing
-the properties' values. This must be done after the io layer is initialized, as
-the |DTB| is stored on an external device (FIP).
+The ``fconf_load_config(image_id)`` must be called to load fw_config and
+tb_fw_config devices tree containing the properties' values. This must be done
+after the io layer is initialized, as the |DTB| is stored on an external
+device (FIP).
 
 .. uml:: ../../resources/diagrams/plantuml/fconf_bl1_load_config.puml
 

docs/getting_started/porting-guide.rst

@@ -1424,7 +1424,7 @@ are platform specific.
 
 On Arm standard platforms, the arguments received are :
 
-    arg0 - Points to load address of HW_CONFIG if present
+    arg0 - Points to load address of FW_CONFIG
 
     arg1 - ``meminfo`` structure populated by BL1. The platform copies
     the contents of ``meminfo`` as it may be subsequently overwritten by BL2.
@@ -1736,6 +1736,10 @@ In Arm standard platforms, the arguments received are :
     which is list of executable images following BL31,
 
     arg1 - Points to load address of SOC_FW_CONFIG if present
+           except in case of Arm FVP platform.
+
+           In case of Arm FVP platform, Points to load address
+           of FW_CONFIG.
 
     arg2 - Points to load address of HW_CONFIG if present
 

docs/resources/diagrams/plantuml/fconf_bl1_load_config.puml

@@ -13,6 +13,7 @@ end box
 
 box "platform common code"
 	participant plat_bl1_common
+	participant fconf_dyn_cfg_getter
 	participant fconf
 end box
 
@@ -20,12 +21,17 @@ bl1_main -> fvp_bl1_setup : bl1_platform_setup()
 fvp_bl1_setup -> arm_bl1_setup : arm_bl1_platform_setup()
 arm_bl1_setup -> arm_io_storage : plat_arm_io_setup()
 note over arm_io_storage : register and setup fip
-arm_bl1_setup -> fconf : fconf_load_config()
+arm_bl1_setup -> fconf : set_fw_config_info(fw_config_base, max_size)
+note over fconf
+	set fw_config information
+	(address, size, image_id)
+	in global dtb_infos array.
+end note
 activate fconf
-	note over fconf
-		create and populate an
-		image_desc_t for FW_CONFIG
-	end note
+	arm_bl1_setup -> fconf : fconf_load_config(FW_CONFIG_ID)
+	fconf -> fconf : FCONF_GET_PROPERTY(dyn_cfg, dtb, FW_CONFIG_ID)
+	fconf -> fconf_dyn_cfg_getter: dyn_cfg_dtb_info_getter(FW_CONFIG_ID)
+	fconf_dyn_cfg_getter -> fconf: fw_config_info
 	fconf -> bl_common : load_auth_image(FW_CONFIG_ID, &image_info)
 	activate bl_common
 	note over bl_common
@@ -33,18 +39,38 @@ activate fconf
 		with info from plat_io_policy
 	end note
 	bl_common -> arm_io_storage
-	arm_io_storage -> fconf: FCONF_GET_PROPERTY(arm, arm_io_policies, tb_fw_cfg)
-	note over fconf: use staticaly defined policies in bl1
+	arm_io_storage -> fconf: FCONF_GET_PROPERTY(arm, arm_io_policies, FW_CONFIG_ID)
+	note over fconf: use statically defined policies in bl1
+	fconf <- bl_common : image_info
+	deactivate bl_common
+	note over fconf : get fw_config_dtb from image_info
+	arm_bl1_setup -> fconf: FCONF_GET_PROPERTY(dyn_cfg, dtb, FW_CONFIG_ID)
+	fconf -> fconf_dyn_cfg_getter: dyn_cfg_dtb_info_getter(FW_CONFIG_ID)
+	fconf_dyn_cfg_getter -> arm_bl1_setup: fw_config_info
+	arm_bl1_setup -> fconf_dyn_cfg_getter: populate_dtb_registry(uintptr_t dtb)
+	arm_bl1_setup -> fconf: fconf_load_config(TB_FW_CONFIG_ID)
+	fconf -> fconf : FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID)
+	fconf -> fconf_dyn_cfg_getter: dyn_cfg_dtb_info_getter(TB_FW_CONFIG_ID)
+	fconf_dyn_cfg_getter -> fconf: tb_fw_config_info
+	fconf -> bl_common : load_auth_image(TB_FW_CONFIG_ID, &image_info)
+	activate bl_common
+	note over bl_common
+		load and auth image from fip
+		with info from plat_io_policy
+	end note
+	bl_common -> arm_io_storage
+	arm_io_storage -> fconf: FCONF_GET_PROPERTY(arm, arm_io_policies, TB_FW_CONFIG_ID)
+	note over fconf: use statically defined policies in bl1
 	fconf <- bl_common : image_info
 	deactivate bl_common
 	note over fconf : get tb_fw_config_dtb from image_info
-	fconf -> plat_bl1_common : bl1_plat_get_image_desc(BL2_IMAGE_ID)
-	fconf <- plat_bl1_common : BL2_IMAGE_DESC
-	note over fconf
-		set ep_info.args.arg0 of BL2_IMAGE_DESC
-		to FW_CONFIG base address
+	fconf -> arm_bl1_setup
+	arm_bl1_setup -> plat_bl1_common : bl1_plat_get_image_desc(BL2_IMAGE_ID)
+	arm_bl1_setup <- plat_bl1_common : BL2_IMAGE_DESC
+	note over arm_bl1_setup
+	set ep_info.args.arg0 of BL2_IMAGE_DESC
+	to FW_CONFIG base address
 	end note
-arm_bl1_setup <- fconf
 deactivate fconf
 
 == load & auth, prepare and jump to BL2 ==

docs/resources/diagrams/plantuml/fconf_bl2_populate.puml

@@ -8,6 +8,7 @@ end box
 box "platform common code"
 	participant fconf
 	participant fconf_tbbr_getter
+participant fconf_dyn_cfg_getter
 end box
 
 box "arm platform code" #LightBlue
@@ -25,10 +26,17 @@ note over arm_bl2_setup
 end note
 arm_bl2_setup -> arm_bl2_setup : arm_bl2_early_platform_setup(\n\t fw_config, mem_layout)
 activate arm_bl2_setup
-	arm_bl2_setup -> fconf: fconf_polulate("TB_FW", fw_config)
+	arm_bl2_setup -> fconf: fconf_populate("FW_CONFIG", fw_config)
 	activate fconf
+		fconf -> fconf_dyn_cfg_getter: populate_dtb_registry(uintptr_t dtb)
+		note over fconf_dyn_cfg_getter: read dtb_registry properties from dtb
+		fconf_dyn_cfg_getter -> arm_bl2_setup
+		arm_bl2_setup -> fconf: FCONF_GET_PROPERTY(dyn_cfg, dtb, TB_FW_CONFIG_ID)
+		fconf -> fconf_dyn_cfg_getter: dyn_cfg_dtb_info_getter(TB_FW_CONFIG_ID)
+		fconf_dyn_cfg_getter -> arm_bl2_setup: tb_fw_config_info
+		arm_bl2_setup -> fconf: fconf_populate("TB_FW_CONFIG", tb_fw_config)
 		fconf -> fconf_tbbr_getter: fconf_populate_tbbr_dyn_config(uintptr_t dtb)
-		note over fconf_tbbr_getter: read tbbr propeties from dtb
+		note over fconf_tbbr_getter: read tbbr properties from dtb
 		fconf -> arm_fconf_io: fconf_populate_arm_io_policies(uintptr_t dtb)
 		note over arm_fconf_io: read arm io propeties from dtb
 	deactivate fconf

plat/arm/board/fvp/fdts/fvp_fw_config.dts

@@ -31,14 +31,14 @@
 		 * is loaded at base of DRAM.
 		 */
 		soc_fw-config {
-			load-address = <0x0 0x04001000>;
+			load-address = <0x0 0x04001300>;
 			max-size = <0x200>;
 			id = <SOC_FW_CONFIG_ID>;
 		};
 
 		tos_fw-config {
-			load-address = <0x0 0x04001200>;
-			max-size = <0x1000>;
+			load-address = <0x0 0x04001500>;
+			max-size = <0xB00>;
 			id = <TOS_FW_CONFIG_ID>;
 		};
 

plat/arm/board/fvp/fvp_bl2_setup.c

@@ -4,7 +4,13 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
+#include <assert.h>
+
+#include <common/desc_image_load.h>
 #include <drivers/arm/sp804_delay_timer.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
+
 #include <plat/arm/common/plat_arm.h>
 #include <plat/common/platform.h>
 #include <platform_def.h>
@@ -26,3 +32,40 @@ void bl2_platform_setup(void)
 	/* Initialize System level generic or SP804 timer */
 	fvp_timer_init();
 }
+
+/*******************************************************************************
+ * This function returns the list of executable images
+ ******************************************************************************/
+struct bl_params *plat_get_next_bl_params(void)
+{
+	struct bl_params *arm_bl_params;
+
+	arm_bl_params = arm_get_next_bl_params();
+
+#if __aarch64__ && !BL2_AT_EL3
+	const struct dyn_cfg_dtb_info_t *fw_config_info;
+	bl_mem_params_node_t *param_node;
+	uintptr_t fw_config_base = 0U;
+	entry_point_info_t *ep_info;
+
+	/* Get BL31 image node */
+	param_node = get_bl_mem_params_node(BL31_IMAGE_ID);
+	assert(param_node != NULL);
+
+	/* get fw_config load address */
+	fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, FW_CONFIG_ID);
+	assert(fw_config_info != NULL);
+
+	fw_config_base = fw_config_info->config_addr;
+	assert(fw_config_base != 0U);
+
+	/*
+	 * Get the entry point info of BL31 image and override
+	 * arg1 of entry point info with fw_config base address
+	 */
+	ep_info = &param_node->ep_info;
+	ep_info->args.arg1 = (uint32_t)fw_config_base;
+#endif /* __aarch64__ && !BL2_AT_EL3 */
+
+	return arm_bl_params;
+}

plat/arm/board/fvp/fvp_bl31_setup.c

@@ -9,6 +9,7 @@
 #include <drivers/arm/smmu_v3.h>
 #include <fconf_hw_config_getter.h>
 #include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
 #include <lib/mmio.h>
 #include <plat/arm/common/arm_config.h>
 #include <plat/arm/common/plat_arm.h>
@@ -16,11 +17,22 @@
 
 #include "fvp_private.h"
 
-uintptr_t hw_config_dtb;
-
 void __init bl31_early_platform_setup2(u_register_t arg0,
 		u_register_t arg1, u_register_t arg2, u_register_t arg3)
 {
+#if !RESET_TO_BL31 && !BL2_AT_EL3
+	const struct dyn_cfg_dtb_info_t *soc_fw_config_info;
+
+	INFO("BL31 FCONF: FW_CONFIG address = %lx\n", (uintptr_t)arg1);
+	/* Fill the properties struct with the info from the config dtb */
+	fconf_populate("FW_CONFIG", arg1);
+
+	soc_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, SOC_FW_CONFIG_ID);
+	if (soc_fw_config_info != NULL) {
+		arg1 = soc_fw_config_info->config_addr;
+	}
+#endif /* !RESET_TO_BL31 && !BL2_AT_EL3 */
+
 	arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 
 	/* Initialize the platform config for future decision making */
@@ -47,8 +59,6 @@ void __init bl31_early_platform_setup2(u_register_t arg0,
 	/* On FVP RevC, initialize SMMUv3 */
 	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_SMMUV3) != 0U)
 		smmuv3_init(PLAT_FVP_SMMUV3_BASE);
-
-	hw_config_dtb = arg2;
 }
 
 void __init bl31_plat_arch_setup(void)
@@ -61,10 +71,13 @@ void __init bl31_plat_arch_setup(void)
 	 * control is passed to BL31.
 	 */
 #if !RESET_TO_BL31 && !BL2_AT_EL3
-	assert(hw_config_dtb != 0U);
+	/* HW_CONFIG was also loaded by BL2 */
+	const struct dyn_cfg_dtb_info_t *hw_config_info;
 
-	INFO("BL31 FCONF: HW_CONFIG address = %p\n", (void *)hw_config_dtb);
-	fconf_populate("HW_CONFIG", hw_config_dtb);
+	hw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, HW_CONFIG_ID);
+	assert(hw_config_info != NULL);
+
+	fconf_populate("HW_CONFIG", hw_config_info->config_addr);
 #endif
 }
 

plat/arm/board/fvp/platform.mk

@@ -217,6 +217,7 @@ BL31_SOURCES		+=	drivers/arm/fvp/fvp_pwrc.c			\
 ifeq ($(filter 1,${BL2_AT_EL3} ${RESET_TO_BL31}),)
 BL31_SOURCES		+=	common/fdt_wrappers.c				\
 				lib/fconf/fconf.c				\
+				lib/fconf/fconf_dyn_cfg_getter.c		\
 				plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
 
 ifeq (${SEC_INT_DESC_IN_FCONF},1)