diff --git a/.gitignore b/.gitignore
index 64b389b12..79c510405 100644
--- a/.gitignore
+++ b/.gitignore
@@ -15,6 +15,10 @@ tools/renesas/rcar_layout_create/*.bin
 tools/renesas/rcar_layout_create/*.srec
 tools/renesas/rcar_layout_create/*.map
 tools/renesas/rcar_layout_create/*.elf
+tools/renesas/rzg_layout_create/*.bin
+tools/renesas/rzg_layout_create/*.srec
+tools/renesas/rzg_layout_create/*.map
+tools/renesas/rzg_layout_create/*.elf
 tools/fiptool/fiptool
 tools/fiptool/fiptool.exe
 tools/cert_create/src/*.o
diff --git a/docs/about/maintainers.rst b/docs/about/maintainers.rst
index 7c91e18b0..90aed508c 100644
--- a/docs/about/maintainers.rst
+++ b/docs/about/maintainers.rst
@@ -494,6 +494,8 @@ Renesas RZ/G2 platform port
 :G: `bijucdas`_
 :M: Marek Vasut <marek.vasut@gmail.com>
 :G: `marex`_
+:M: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+:G: `prabhakarlad`_
 :F: docs/plat/rz-g2.rst
 :F: plat/renesas/common
 :F: plat/renesas/rzg
@@ -637,6 +639,7 @@ Build system
 .. _mtk09422: https://github.com/mtk09422
 .. _niej: https://github.com/niej
 .. _npoushin: https://github.com/npoushin
+.. _prabhakarlad: https://github.com/prabhakarlad
 .. _qoriq-open-source: https://github.com/qoriq-open-source
 .. _remi-triplefault: https://github.com/repk
 .. _rockchip-linux: https://github.com/rockchip-linux
diff --git a/drivers/renesas/common/emmc/emmc_registers.h b/drivers/renesas/common/emmc/emmc_registers.h
index ae689ca24..392abb8fb 100644
--- a/drivers/renesas/common/emmc/emmc_registers.h
+++ b/drivers/renesas/common/emmc/emmc_registers.h
@@ -11,11 +11,11 @@
 #define MMC_CH0		(0U)	/* SDHI2/MMC0 */
 #define MMC_CH1		(1U)	/* SDHI3/MMC1 */
 
-#if RCAR_LSI == RCAR_E3
-#define USE_MMC_CH	(MMC_CH1)	/* R-Car E3 */
-#else /* RCAR_LSI == RCAR_E3 */
+#if (RCAR_LSI == RCAR_E3)  || (RCAR_LSI == RZ_G2M)
+#define USE_MMC_CH	(MMC_CH1)	/* R-Car E3 or RZ/G2M */
+#else /* RCAR_LSI == RCAR_E3 || RCAR_LSI == RZ_G2M */
 #define USE_MMC_CH	(MMC_CH0)	/* R-Car H3/M3/M3N */
-#endif /* RCAR_LSI == RCAR_E3 */
+#endif /* RCAR_LSI == RCAR_E3 || RCAR_LSI == RZ_G2M */
 
 #define BIT0	(0x00000001U)
 #define BIT1	(0x00000002U)
diff --git a/drivers/renesas/rzg/board/board.c b/drivers/renesas/rzg/board/board.c
new file mode 100644
index 000000000..cfbb04719
--- /dev/null
+++ b/drivers/renesas/rzg/board/board.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2020, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <lib/mmio.h>
+#include <lib/utils_def.h>
+
+#include "board.h"
+#include "rcar_def.h"
+
+#ifndef BOARD_DEFAULT
+#define BOARD_DEFAULT		(BOARD_HIHOPE_RZ_G2M << BOARD_CODE_SHIFT)
+#endif /* BOARD_DEFAULT */
+
+#define BOARD_CODE_MASK		(0xF8U)
+#define BOARD_REV_MASK		(0x07U)
+#define BOARD_CODE_SHIFT	(0x03)
+#define BOARD_ID_UNKNOWN	(0xFFU)
+
+#define GPIO_INDT5	0xE605500C
+#define GP5_19_BIT	(0x01U << 19)
+#define GP5_21_BIT	(0x01U << 21)
+#define GP5_25_BIT	(0x01U << 25)
+
+#define HM_ID	{ 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
+
+const char *g_board_tbl[] = {
+	[BOARD_HIHOPE_RZ_G2M] = "HiHope RZ/G2M",
+	[BOARD_UNKNOWN] = "unknown"
+};
+
+void rzg_get_board_type(uint32_t *type, uint32_t *rev)
+{
+	static uint8_t board_id = BOARD_ID_UNKNOWN;
+	const uint8_t board_tbl[][8] = {
+		[BOARD_HIHOPE_RZ_G2M] = HM_ID,
+	};
+	uint32_t reg, boardInfo;
+
+	if (board_id == BOARD_ID_UNKNOWN) {
+		board_id = BOARD_DEFAULT;
+	}
+
+	*type = ((uint32_t) board_id & BOARD_CODE_MASK) >> BOARD_CODE_SHIFT;
+
+	if (*type >= ARRAY_SIZE(board_tbl)) {
+		/* no revision information, set Rev0.0. */
+		*rev = 0;
+	} else {
+		reg = mmio_read_32(RCAR_PRR);
+		if ((reg & PRR_CUT_MASK) == RCAR_M3_CUT_VER11) {
+			*rev = board_tbl[*type][(uint8_t)(board_id & BOARD_REV_MASK)];
+		} else {
+			boardInfo = mmio_read_32(GPIO_INDT5) &
+				    (GP5_19_BIT | GP5_21_BIT);
+			*rev = (((boardInfo & GP5_19_BIT) >> 14) |
+				((boardInfo & GP5_21_BIT) >> 17)) + 0x30U;
+		}
+	}
+}
diff --git a/drivers/renesas/rzg/board/board.h b/drivers/renesas/rzg/board/board.h
new file mode 100644
index 000000000..c0c3d0cda
--- /dev/null
+++ b/drivers/renesas/rzg/board/board.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2020, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef RZ_G2_BOARD_H
+#define RZ_G2_BOARD_H
+
+enum rzg2_board_id {
+	BOARD_HIHOPE_RZ_G2M = 0,
+	BOARD_UNKNOWN
+};
+
+#define BOARD_REV_UNKNOWN	(0xFFU)
+
+extern const char *g_board_tbl[];
+
+/************************************************************************
+ * Revisions are expressed in 8 bits.
+ *  The upper 4 bits are major version.
+ *  The lower 4 bits are minor version.
+ ************************************************************************/
+#define GET_BOARD_MAJOR(a)	((uint32_t)(a) >> 0x4)
+#define GET_BOARD_MINOR(a)	((uint32_t)(a) &  0xF)
+#define GET_BOARD_NAME(a)	(g_board_tbl[(a)])
+
+void rzg_get_board_type(uint32_t *type, uint32_t *rev);
+
+#endif /* RZ_G2_BOARD_H */
diff --git a/plat/renesas/common/bl2_cpg_init.c b/plat/renesas/common/bl2_cpg_init.c
index 175434469..677a57d04 100644
--- a/plat/renesas/common/bl2_cpg_init.c
+++ b/plat/renesas/common/bl2_cpg_init.c
@@ -18,7 +18,7 @@ static void bl2_realtime_cpg_init_h3(void);
 static void bl2_system_cpg_init_h3(void);
 #endif
 
-#if (RCAR_LSI == RCAR_AUTO) || (RCAR_LSI == RCAR_M3)
+#if (RCAR_LSI == RCAR_AUTO) || (RCAR_LSI == RCAR_M3) || (RCAR_LSI == RZ_G2M)
 static void bl2_realtime_cpg_init_m3(void);
 static void bl2_system_cpg_init_m3(void);
 #endif
@@ -149,7 +149,7 @@ static void bl2_system_cpg_init_h3(void)
 }
 #endif
 
-#if (RCAR_LSI == RCAR_AUTO) || (RCAR_LSI == RCAR_M3)
+#if (RCAR_LSI == RCAR_AUTO) || (RCAR_LSI == RCAR_M3) || (RCAR_LSI == RZ_G2M)
 static void bl2_realtime_cpg_init_m3(void)
 {
 	/* Realtime Module Stop Control Registers */
@@ -362,7 +362,7 @@ void bl2_cpg_init(void)
 		}
 #elif (RCAR_LSI == RCAR_H3) || (RCAR_LSI == RCAR_H3N)
 		bl2_realtime_cpg_init_h3();
-#elif RCAR_LSI == RCAR_M3
+#elif (RCAR_LSI == RCAR_M3) || (RCAR_LSI == RZ_G2M)
 		bl2_realtime_cpg_init_m3();
 #elif RCAR_LSI == RCAR_M3N
 		bl2_realtime_cpg_init_m3n();
@@ -408,7 +408,7 @@ void bl2_system_cpg_init(void)
 	}
 #elif (RCAR_LSI == RCAR_H3) || (RCAR_LSI == RCAR_H3N)
 	bl2_system_cpg_init_h3();
-#elif RCAR_LSI == RCAR_M3
+#elif (RCAR_LSI == RCAR_M3) || (RCAR_LSI == RZ_G2M)
 	bl2_system_cpg_init_m3();
 #elif RCAR_LSI == RCAR_M3N
 	bl2_system_cpg_init_m3n();
diff --git a/plat/renesas/common/common.mk b/plat/renesas/common/common.mk
index cadb3d764..984ab5bac 100644
--- a/plat/renesas/common/common.mk
+++ b/plat/renesas/common/common.mk
@@ -33,6 +33,7 @@ RCAR_H3N:=4
 RCAR_D3:=5
 RCAR_V3M:=6
 RCAR_AUTO:=99
+RZ_G2M:=100
 $(eval $(call add_define,RCAR_H3))
 $(eval $(call add_define,RCAR_M3))
 $(eval $(call add_define,RCAR_M3N))
@@ -41,6 +42,8 @@ $(eval $(call add_define,RCAR_H3N))
 $(eval $(call add_define,RCAR_D3))
 $(eval $(call add_define,RCAR_V3M))
 $(eval $(call add_define,RCAR_AUTO))
+$(eval $(call add_define,RZ_G2M))
+
 RCAR_CUT_10:=0
 RCAR_CUT_11:=1
 RCAR_CUT_13:=3
diff --git a/plat/renesas/rzg/bl2_plat_setup.c b/plat/renesas/rzg/bl2_plat_setup.c
new file mode 100644
index 000000000..13f413b55
--- /dev/null
+++ b/plat/renesas/rzg/bl2_plat_setup.c
@@ -0,0 +1,909 @@
+/*
+ * Copyright (c) 2020, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <string.h>
+
+#include <arch_helpers.h>
+#include <bl1/bl1.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/console.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_storage.h>
+#include <libfdt.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_defs.h>
+#include <platform_def.h>
+#include <plat/common/platform.h>
+
+#include "avs_driver.h"
+#include "board.h"
+#include "boot_init_dram.h"
+#include "cpg_registers.h"
+#include "emmc_def.h"
+#include "emmc_hal.h"
+#include "emmc_std.h"
+#include "io_common.h"
+#include "io_rcar.h"
+#include "qos_init.h"
+#include "rcar_def.h"
+#include "rcar_private.h"
+#include "rcar_version.h"
+#include "rom_api.h"
+
+#define MAX_DRAM_CHANNELS 4
+/*
+ * DDR ch0 has a shadow area mapped in 32bit address space.
+ * Physical address 0x4_0000_0000 - 0x4_7fff_ffff in 64bit space
+ * is mapped to 0x4000_0000 - 0xbfff_ffff in 32bit space.
+ */
+#define MAX_DRAM_SIZE_CH0_32BIT_ADDR_SPACE 0x80000000ULL
+
+#if RCAR_BL2_DCACHE == 1
+/*
+ * Following symbols are only used during plat_arch_setup() only
+ * when RCAR_BL2_DCACHE is enabled.
+ */
+static const uint64_t BL2_RO_BASE		= BL_CODE_BASE;
+static const uint64_t BL2_RO_LIMIT		= BL_CODE_END;
+
+#if USE_COHERENT_MEM
+static const uint64_t BL2_COHERENT_RAM_BASE	= BL_COHERENT_RAM_BASE;
+static const uint64_t BL2_COHERENT_RAM_LIMIT	= BL_COHERENT_RAM_END;
+#endif /* USE_COHERENT_MEM */
+
+#endif /* RCAR_BL2_DCACHE */
+
+extern void plat_rcar_gic_driver_init(void);
+extern void plat_rcar_gic_init(void);
+extern void bl2_enter_bl31(const struct entry_point_info *bl_ep_info);
+extern void bl2_system_cpg_init(void);
+extern void bl2_secure_setting(void);
+extern void bl2_cpg_init(void);
+extern void rcar_io_emmc_setup(void);
+extern void rcar_io_setup(void);
+extern void rcar_swdt_release(void);
+extern void rcar_swdt_init(void);
+extern void rcar_rpc_init(void);
+extern void rcar_dma_init(void);
+extern void rzg_pfc_init(void);
+
+static void bl2_init_generic_timer(void);
+
+/* RZ/G2 product check */
+#if RCAR_LSI == RZ_G2M
+#define TARGET_PRODUCT			PRR_PRODUCT_M3
+#define TARGET_NAME			"RZ/G2M"
+#elif RCAR_LSI == RCAR_AUTO
+#define TARGET_NAME			"RZ/G2M"
+#endif /* RCAR_LSI == RZ_G2M */
+
+#define GPIO_INDT			(GPIO_INDT1)
+#define GPIO_BKUP_TRG_SHIFT		(1U << 8U)
+
+CASSERT((PARAMS_BASE + sizeof(bl2_to_bl31_params_mem_t) + 0x100)
+	 < (RCAR_SHARED_MEM_BASE + RCAR_SHARED_MEM_SIZE),
+	assert_bl31_params_do_not_fit_in_shared_memory);
+
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+/* FDT with DRAM configuration */
+uint64_t fdt_blob[PAGE_SIZE_4KB / sizeof(uint64_t)];
+static void *fdt = (void *)fdt_blob;
+
+static void unsigned_num_print(uint64_t unum, unsigned int radix, char *string)
+{
+	/* Just need enough space to store 64 bit decimal integer */
+	char num_buf[20];
+	int i = 0;
+	unsigned int rem;
+
+	do {
+		rem = unum % radix;
+		if (rem < 0xaU) {
+			num_buf[i] = '0' + rem;
+		} else {
+			num_buf[i] = 'a' + (rem - 0xaU);
+		}
+		i++;
+		unum /= radix;
+	} while (unum > 0U);
+
+	while (--i >= 0) {
+		*string++ = num_buf[i];
+	}
+	*string = 0;
+}
+
+#if RCAR_LOSSY_ENABLE == 1
+typedef struct bl2_lossy_info {
+	uint32_t magic;
+	uint32_t a0;
+	uint32_t b0;
+} bl2_lossy_info_t;
+
+static void bl2_lossy_gen_fdt(uint32_t no, uint64_t start_addr,
+			      uint64_t end_addr, uint32_t format,
+			      uint32_t enable, int fcnlnode)
+{
+	const uint64_t fcnlsize = cpu_to_fdt64(end_addr - start_addr);
+	char nodename[40] = { 0 };
+	int ret, node;
+
+	/* Ignore undefined addresses */
+	if (start_addr == 0UL && end_addr == 0UL) {
+		return;
+	}
+
+	snprintf(nodename, sizeof(nodename), "lossy-decompression@");
+	unsigned_num_print(start_addr, 16, nodename + strlen(nodename));
+
+	node = ret = fdt_add_subnode(fdt, fcnlnode, nodename);
+	if (ret < 0) {
+		NOTICE("BL2: Cannot create FCNL node (ret=%i)\n", ret);
+		panic();
+	}
+
+	ret = fdt_setprop_string(fdt, node, "compatible",
+				 "renesas,lossy-decompression");
+	if (ret < 0) {
+		NOTICE("BL2: Cannot add FCNL compat string %s (ret=%i)\n",
+		       "renesas,lossy-decompression", ret);
+		panic();
+	}
+
+	ret = fdt_appendprop_string(fdt, node, "compatible",
+				    "shared-dma-pool");
+	if (ret < 0) {
+		NOTICE("BL2: Cannot append FCNL compat string %s (ret=%i)\n",
+		       "shared-dma-pool", ret);
+		panic();
+	}
+
+	ret = fdt_setprop_u64(fdt, node, "reg", start_addr);
+	if (ret < 0) {
+		NOTICE("BL2: Cannot add FCNL reg prop (ret=%i)\n", ret);
+		panic();
+	}
+
+	ret = fdt_appendprop(fdt, node, "reg", &fcnlsize, sizeof(fcnlsize));
+	if (ret < 0) {
+		NOTICE("BL2: Cannot append FCNL reg size prop (ret=%i)\n", ret);
+		panic();
+	}
+
+	ret = fdt_setprop(fdt, node, "no-map", NULL, 0);
+	if (ret < 0) {
+		NOTICE("BL2: Cannot add FCNL no-map prop (ret=%i)\n", ret);
+		panic();
+	}
+
+	ret = fdt_setprop_u32(fdt, node, "renesas,formats", format);
+	if (ret < 0) {
+		NOTICE("BL2: Cannot add FCNL formats prop (ret=%i)\n", ret);
+		panic();
+	}
+}
+
+static void bl2_lossy_setting(uint32_t no, uint64_t start_addr,
+			      uint64_t end_addr, uint32_t format,
+			      uint32_t enable, int fcnlnode)
+{
+	bl2_lossy_info_t info;
+	uint32_t reg;
+
+	bl2_lossy_gen_fdt(no, start_addr, end_addr, format, enable, fcnlnode);
+
+	reg = format | (start_addr >> 20);
+	mmio_write_32(AXI_DCMPAREACRA0 + 0x8U * no, reg);
+	mmio_write_32(AXI_DCMPAREACRB0 + 0x8U * no, end_addr >> 20);
+	mmio_write_32(AXI_DCMPAREACRA0 + 0x8U * no, reg | enable);
+
+	info.magic = 0x12345678U;
+	info.a0 = mmio_read_32(AXI_DCMPAREACRA0 + 0x8U * no);
+	info.b0 = mmio_read_32(AXI_DCMPAREACRB0 + 0x8U * no);
+
+	mmio_write_32(LOSSY_PARAMS_BASE + sizeof(info) * no, info.magic);
+	mmio_write_32(LOSSY_PARAMS_BASE + sizeof(info) * no + 0x4U, info.a0);
+	mmio_write_32(LOSSY_PARAMS_BASE + sizeof(info) * no + 0x8U, info.b0);
+
+	NOTICE("     Entry %d: DCMPAREACRAx:0x%x DCMPAREACRBx:0x%x\n", no,
+	       mmio_read_32(AXI_DCMPAREACRA0 + 0x8U * no),
+	       mmio_read_32(AXI_DCMPAREACRB0 + 0x8U * no));
+}
+#endif /* RCAR_LOSSY_ENABLE == 1 */
+
+void bl2_plat_flush_bl31_params(void)
+{
+	uint32_t product_cut, product, cut;
+	uint32_t boot_dev, boot_cpu;
+	uint32_t reg;
+
+	reg = mmio_read_32(RCAR_MODEMR);
+	boot_dev = reg & MODEMR_BOOT_DEV_MASK;
+
+	if (boot_dev == MODEMR_BOOT_DEV_EMMC_25X1 ||
+	    boot_dev == MODEMR_BOOT_DEV_EMMC_50X8) {
+		emmc_terminate();
+	}
+
+	if ((reg & MODEMR_BOOT_CPU_MASK) != MODEMR_BOOT_CPU_CR7) {
+		bl2_secure_setting();
+	}
+
+	reg = mmio_read_32(RCAR_PRR);
+	product_cut = reg & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
+	product = reg & PRR_PRODUCT_MASK;
+	cut = reg & PRR_CUT_MASK;
+
+	if (!((product == PRR_PRODUCT_M3 && cut < PRR_PRODUCT_30) ||
+	      (product == PRR_PRODUCT_H3 && cut < PRR_PRODUCT_20))) {
+		/* Disable MFIS write protection */
+		mmio_write_32(MFISWPCNTR, MFISWPCNTR_PASSWORD | 1U);
+	}
+
+	reg = mmio_read_32(RCAR_MODEMR);
+	boot_cpu = reg & MODEMR_BOOT_CPU_MASK;
+	if (boot_cpu == MODEMR_BOOT_CPU_CA57 ||
+	    boot_cpu == MODEMR_BOOT_CPU_CA53) {
+		if (product_cut == PRR_PRODUCT_H3_CUT20) {
+			mmio_write_32(IPMMUVI0_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUVI1_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUPV0_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUPV1_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUPV2_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUPV3_IMSCTLR, IMSCTLR_DISCACHE);
+		} else if (product_cut == (PRR_PRODUCT_M3N | PRR_PRODUCT_10) ||
+			   product_cut == (PRR_PRODUCT_M3N | PRR_PRODUCT_11)) {
+			mmio_write_32(IPMMUVI0_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUPV0_IMSCTLR, IMSCTLR_DISCACHE);
+		} else if ((product_cut == (PRR_PRODUCT_E3 | PRR_PRODUCT_10)) ||
+			   (product_cut == (PRR_PRODUCT_E3 | PRR_PRODUCT_11))) {
+			mmio_write_32(IPMMUVI0_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUVP0_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUPV0_IMSCTLR, IMSCTLR_DISCACHE);
+		}
+
+		if (product_cut == (PRR_PRODUCT_H3_CUT20) ||
+		    product_cut == (PRR_PRODUCT_M3N | PRR_PRODUCT_10) ||
+		    product_cut == (PRR_PRODUCT_M3N | PRR_PRODUCT_11) ||
+		    product_cut == (PRR_PRODUCT_E3 | PRR_PRODUCT_10)) {
+			mmio_write_32(IPMMUHC_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMURT_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUMP_IMSCTLR, IMSCTLR_DISCACHE);
+
+			mmio_write_32(IPMMUDS0_IMSCTLR, IMSCTLR_DISCACHE);
+			mmio_write_32(IPMMUDS1_IMSCTLR, IMSCTLR_DISCACHE);
+		}
+	}
+
+	mmio_write_32(IPMMUMM_IMSCTLR, IPMMUMM_IMSCTLR_ENABLE);
+	mmio_write_32(IPMMUMM_IMAUXCTLR, IPMMUMM_IMAUXCTLR_NMERGE40_BIT);
+
+	rcar_swdt_release();
+	bl2_system_cpg_init();
+
+#if RCAR_BL2_DCACHE == 1
+	/* Disable data cache (clean and invalidate) */
+	disable_mmu_el3();
+#endif /* RCAR_BL2_DCACHE == 1 */
+}
+
+static uint32_t is_ddr_backup_mode(void)
+{
+#if RCAR_SYSTEM_SUSPEND
+	static uint32_t reason = RCAR_COLD_BOOT;
+	static uint32_t once;
+
+	if (once != 0U) {
+		return reason;
+	}
+
+	once = 1;
+	if ((mmio_read_32(GPIO_INDT) & GPIO_BKUP_TRG_SHIFT) == 0U) {
+		return reason;
+	}
+
+	reason = RCAR_WARM_BOOT;
+	return reason;
+#else /* RCAR_SYSTEM_SUSPEND */
+	return RCAR_COLD_BOOT;
+#endif /* RCAR_SYSTEM_SUSPEND */
+}
+
+int bl2_plat_handle_pre_image_load(unsigned int image_id)
+{
+	u_register_t *boot_kind = (void *)BOOT_KIND_BASE;
+	bl_mem_params_node_t *bl_mem_params;
+
+	if (image_id != BL31_IMAGE_ID) {
+		return 0;
+	}
+
+	bl_mem_params = get_bl_mem_params_node(image_id);
+
+	if (is_ddr_backup_mode() != RCAR_COLD_BOOT) {
+		*boot_kind  = RCAR_WARM_BOOT;
+		flush_dcache_range(BOOT_KIND_BASE, sizeof(*boot_kind));
+
+		console_flush();
+		bl2_plat_flush_bl31_params();
+
+		/* will not return */
+		bl2_enter_bl31(&bl_mem_params->ep_info);
+	}
+
+	*boot_kind  = RCAR_COLD_BOOT;
+	flush_dcache_range(BOOT_KIND_BASE, sizeof(*boot_kind));
+
+	return 0;
+}
+
+static uint64_t rzg_get_dest_addr_from_cert(uint32_t certid, uintptr_t *dest)
+{
+	uint32_t cert, len;
+	int err;
+
+	err = rcar_get_certificate(certid, &cert);
+	if (err != 0) {
+		ERROR("%s : cert file load error", __func__);
+		return 1U;
+	}
+
+	rcar_read_certificate((uint64_t)cert, &len, dest);
+
+	return 0U;
+}
+
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+	static bl2_to_bl31_params_mem_t *params;
+	bl_mem_params_node_t *bl_mem_params;
+	uintptr_t dest;
+	uint64_t ret;
+
+	if (params == NULL) {
+		params = (bl2_to_bl31_params_mem_t *)PARAMS_BASE;
+		memset((void *)PARAMS_BASE, 0, sizeof(*params));
+	}
+
+	bl_mem_params = get_bl_mem_params_node(image_id);
+
+	switch (image_id) {
+	case BL31_IMAGE_ID:
+		ret = rzg_get_dest_addr_from_cert(SOC_FW_CONTENT_CERT_ID,
+						  &dest);
+		if (ret == 0U) {
+			bl_mem_params->image_info.image_base = dest;
+		}
+		break;
+	case BL32_IMAGE_ID:
+		ret = rzg_get_dest_addr_from_cert(TRUSTED_OS_FW_CONTENT_CERT_ID,
+						  &dest);
+		if (ret == 0U) {
+			bl_mem_params->image_info.image_base = dest;
+		}
+
+		memcpy(&params->bl32_ep_info, &bl_mem_params->ep_info,
+		       sizeof(entry_point_info_t));
+		break;
+	case BL33_IMAGE_ID:
+		memcpy(&params->bl33_ep_info, &bl_mem_params->ep_info,
+		       sizeof(entry_point_info_t));
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+struct meminfo *bl2_plat_sec_mem_layout(void)
+{
+	return &bl2_tzram_layout;
+}
+
+static void bl2_populate_compatible_string(void *dt)
+{
+	uint32_t board_type;
+	uint32_t board_rev;
+	uint32_t reg;
+	int ret;
+
+	fdt_setprop_u32(dt, 0, "#address-cells", 2);
+	fdt_setprop_u32(dt, 0, "#size-cells", 2);
+
+	/* Populate compatible string */
+	rzg_get_board_type(&board_type, &board_rev);
+	switch (board_type) {
+	case BOARD_HIHOPE_RZ_G2M:
+		ret = fdt_setprop_string(dt, 0, "compatible",
+					 "hoperun,hihope-rzg2m");
+		break;
+	default:
+		NOTICE("BL2: Cannot set compatible string, board unsupported\n");
+		panic();
+		break;
+	}
+
+	if (ret < 0) {
+		NOTICE("BL2: Cannot set compatible string (ret=%i)\n", ret);
+		panic();
+	}
+
+	reg = mmio_read_32(RCAR_PRR);
+	switch (reg & PRR_PRODUCT_MASK) {
+	case PRR_PRODUCT_M3:
+		ret = fdt_appendprop_string(dt, 0, "compatible",
+					    "renesas,r8a774a1");
+		break;
+	default:
+		NOTICE("BL2: Cannot set compatible string, SoC unsupported\n");
+		panic();
+		break;
+	}
+
+	if (ret < 0) {
+		NOTICE("BL2: Cannot set compatible string (ret=%i)\n", ret);
+		panic();
+	}
+}
+
+static int bl2_add_memory_node(uint64_t start, uint64_t size)
+{
+	char nodename[32] = { 0 };
+	uint64_t fdtsize;
+	int ret, node;
+
+	fdtsize = cpu_to_fdt64(size);
+
+	snprintf(nodename, sizeof(nodename), "memory@");
+	unsigned_num_print(start, 16, nodename + strlen(nodename));
+	node = ret = fdt_add_subnode(fdt, 0, nodename);
+	if (ret < 0) {
+		return ret;
+	}
+
+	ret = fdt_setprop_string(fdt, node, "device_type", "memory");
+	if (ret < 0) {
+		return ret;
+	}
+
+	ret = fdt_setprop_u64(fdt, node, "reg", start);
+	if (ret < 0) {
+		return ret;
+	}
+
+	return fdt_appendprop(fdt, node, "reg", &fdtsize, sizeof(fdtsize));
+}
+
+static void bl2_advertise_dram_entries(uint64_t dram_config[8])
+{
+	uint64_t start, size;
+	int ret, chan;
+
+	for (chan = 0; chan < MAX_DRAM_CHANNELS; chan++) {
+		start = dram_config[2 * chan];
+		size = dram_config[2 * chan + 1];
+		if (size == 0U) {
+			continue;
+		}
+
+		NOTICE("BL2: CH%d: %llx - %llx, %lld %siB\n",
+		       chan, start, start + size - 1U,
+		       (size >> 30) ? : size >> 20,
+		       (size >> 30) ? "G" : "M");
+	}
+
+	/*
+	 * We add the DT nodes in reverse order here. The fdt_add_subnode()
+	 * adds the DT node before the first existing DT node, so we have
+	 * to add them in reverse order to get nodes sorted by address in
+	 * the resulting DT.
+	 */
+	for (chan = MAX_DRAM_CHANNELS - 1; chan >= 0; chan--) {
+		start = dram_config[2 * chan];
+		size = dram_config[2 * chan + 1];
+		if (size == 0U) {
+			continue;
+		}
+
+		/*
+		 * Channel 0 is mapped in 32bit space and the first
+		 * 128 MiB are reserved
+		 */
+		if (chan == 0) {
+			/*
+			 * Maximum DDR size in Channel 0 for 32 bit space is 2GB, Add DT node
+			 * for remaining region in 64 bit address space
+			 */
+			if (size > MAX_DRAM_SIZE_CH0_32BIT_ADDR_SPACE) {
+				start = dram_config[chan] + MAX_DRAM_SIZE_CH0_32BIT_ADDR_SPACE;
+				size -= MAX_DRAM_SIZE_CH0_32BIT_ADDR_SPACE;
+				ret = bl2_add_memory_node(start, size);
+				if (ret < 0) {
+					goto err;
+				}
+			}
+			start = 0x48000000U;
+			size -= 0x8000000U;
+		}
+
+		ret = bl2_add_memory_node(start, size);
+		if (ret < 0) {
+			goto err;
+		}
+	}
+
+	return;
+err:
+	NOTICE("BL2: Cannot add memory node to FDT (ret=%i)\n", ret);
+	panic();
+}
+
+static void bl2_advertise_dram_size(uint32_t product)
+{
+	uint64_t dram_config[8] = {
+		[0] = 0x400000000ULL,
+		[2] = 0x500000000ULL,
+		[4] = 0x600000000ULL,
+		[6] = 0x700000000ULL,
+	};
+
+	switch (product) {
+	case PRR_PRODUCT_M3:
+		/* 4GB(2GBx2 2ch split) */
+		dram_config[1] = 0x80000000ULL;
+		dram_config[5] = 0x80000000ULL;
+		break;
+	default:
+		NOTICE("BL2: Detected invalid DRAM entries\n");
+		break;
+	}
+
+	bl2_advertise_dram_entries(dram_config);
+}
+
+void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
+				  u_register_t arg3, u_register_t arg4)
+{
+	uint32_t reg, midr, boot_dev, boot_cpu, type, rev;
+	uint32_t product, product_cut, major, minor;
+	int32_t ret;
+	const char *str;
+	const char *unknown = "unknown";
+	const char *cpu_ca57 = "CA57";
+	const char *cpu_ca53 = "CA53";
+	const char *product_g2m = "G2M";
+	const char *boot_hyper80 = "HyperFlash(80MHz)";
+	const char *boot_qspi40 = "QSPI Flash(40MHz)";
+	const char *boot_qspi80 = "QSPI Flash(80MHz)";
+	const char *boot_emmc25x1 = "eMMC(25MHz x1)";
+	const char *boot_emmc50x8 = "eMMC(50MHz x8)";
+	const char *boot_hyper160 = "HyperFlash(160MHz)";
+#if RZG_LCS_STATE_DETECTION_ENABLE
+	uint32_t lcs;
+	const char *lcs_secure = "SE";
+	const char *lcs_cm = "CM";
+	const char *lcs_dm = "DM";
+	const char *lcs_sd = "SD";
+	const char *lcs_fa = "FA";
+#endif /* RZG_LCS_STATE_DETECTION_ENABLE */
+
+#if (RCAR_LOSSY_ENABLE == 1)
+	int fcnlnode;
+#endif /* (RCAR_LOSSY_ENABLE == 1) */
+
+	bl2_init_generic_timer();
+
+	reg = mmio_read_32(RCAR_MODEMR);
+	boot_dev = reg & MODEMR_BOOT_DEV_MASK;
+	boot_cpu = reg & MODEMR_BOOT_CPU_MASK;
+
+	bl2_cpg_init();
+
+	if (boot_cpu == MODEMR_BOOT_CPU_CA57 ||
+	    boot_cpu == MODEMR_BOOT_CPU_CA53) {
+		rzg_pfc_init();
+		rcar_console_boot_init();
+	}
+
+	plat_rcar_gic_driver_init();
+	plat_rcar_gic_init();
+	rcar_swdt_init();
+
+	/* FIQ interrupts are taken to EL3 */
+	write_scr_el3(read_scr_el3() | SCR_FIQ_BIT);
+
+	write_daifclr(DAIF_FIQ_BIT);
+
+	reg = read_midr();
+	midr = reg & (MIDR_PN_MASK << MIDR_PN_SHIFT);
+	switch (midr) {
+	case MIDR_CA57:
+		str = cpu_ca57;
+		break;
+	case MIDR_CA53:
+		str = cpu_ca53;
+		break;
+	default:
+		str = unknown;
+		break;
+	}
+
+	NOTICE("BL2: RZ/G2 Initial Program Loader(%s) Rev.%s\n", str,
+	       version_of_renesas);
+
+	reg = mmio_read_32(RCAR_PRR);
+	product_cut = reg & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
+	product = reg & PRR_PRODUCT_MASK;
+
+	switch (product) {
+	case PRR_PRODUCT_M3:
+		str = product_g2m;
+		break;
+	default:
+		str = unknown;
+		break;
+	}
+
+	if ((product == PRR_PRODUCT_M3) &&
+	    ((reg & RCAR_MAJOR_MASK) == PRR_PRODUCT_20)) {
+		if ((reg & PRR_CUT_MASK) == RCAR_M3_CUT_VER11) {
+			/* M3 Ver.1.1 or Ver.1.2 */
+			NOTICE("BL2: PRR is RZ/%s Ver.1.1 / Ver.1.2\n", str);
+		} else {
+			NOTICE("BL2: PRR is RZ/%s Ver.1.%d\n", str,
+				(reg & RCAR_MINOR_MASK) + RCAR_M3_MINOR_OFFSET);
+		}
+	} else {
+		major = (reg & RCAR_MAJOR_MASK) >> RCAR_MAJOR_SHIFT;
+		major = major + RCAR_MAJOR_OFFSET;
+		minor = reg & RCAR_MINOR_MASK;
+		NOTICE("BL2: PRR is RZ/%s Ver.%d.%d\n", str, major, minor);
+	}
+
+	rzg_get_board_type(&type, &rev);
+
+	switch (type) {
+	case BOARD_HIHOPE_RZ_G2M:
+		break;
+	default:
+		type = BOARD_UNKNOWN;
+		break;
+	}
+
+	if (type == BOARD_UNKNOWN || rev == BOARD_REV_UNKNOWN) {
+		NOTICE("BL2: Board is %s Rev.---\n", GET_BOARD_NAME(type));
+	} else {
+		NOTICE("BL2: Board is %s Rev.%d.%d\n",
+		       GET_BOARD_NAME(type),
+		       GET_BOARD_MAJOR(rev), GET_BOARD_MINOR(rev));
+	}
+
+#if RCAR_LSI != RCAR_AUTO
+	if (product != TARGET_PRODUCT) {
+		ERROR("BL2: IPL was been built for the %s.\n", TARGET_NAME);
+		ERROR("BL2: Please write the correct IPL to flash memory.\n");
+		panic();
+	}
+#endif /* RCAR_LSI != RCAR_AUTO */
+	rcar_avs_init();
+	rcar_avs_setting();
+
+	switch (boot_dev) {
+	case MODEMR_BOOT_DEV_HYPERFLASH160:
+		str = boot_hyper160;
+		break;
+	case MODEMR_BOOT_DEV_HYPERFLASH80:
+		str = boot_hyper80;
+		break;
+	case MODEMR_BOOT_DEV_QSPI_FLASH40:
+		str = boot_qspi40;
+		break;
+	case MODEMR_BOOT_DEV_QSPI_FLASH80:
+		str = boot_qspi80;
+		break;
+	case MODEMR_BOOT_DEV_EMMC_25X1:
+		str = boot_emmc25x1;
+		break;
+	case MODEMR_BOOT_DEV_EMMC_50X8:
+		str = boot_emmc50x8;
+		break;
+	default:
+		str = unknown;
+		break;
+	}
+	NOTICE("BL2: Boot device is %s\n", str);
+
+	rcar_avs_setting();
+
+#if RZG_LCS_STATE_DETECTION_ENABLE
+	reg = rcar_rom_get_lcs(&lcs);
+	if (reg != 0U) {
+		str = unknown;
+		goto lcm_state;
+	}
+
+	switch (lcs) {
+	case LCS_CM:
+		str = lcs_cm;
+		break;
+	case LCS_DM:
+		str = lcs_dm;
+		break;
+	case LCS_SD:
+		str = lcs_sd;
+		break;
+	case LCS_SE:
+		str = lcs_secure;
+		break;
+	case LCS_FA:
+		str = lcs_fa;
+		break;
+	default:
+		str = unknown;
+		break;
+	}
+
+lcm_state:
+	NOTICE("BL2: LCM state is %s\n", str);
+#endif /* RZG_LCS_STATE_DETECTION_ENABLE */
+
+	rcar_avs_end();
+	is_ddr_backup_mode();
+
+	bl2_tzram_layout.total_base = BL31_BASE;
+	bl2_tzram_layout.total_size = BL31_LIMIT - BL31_BASE;
+
+	if (boot_cpu == MODEMR_BOOT_CPU_CA57 ||
+	    boot_cpu == MODEMR_BOOT_CPU_CA53) {
+		ret = rzg_dram_init();
+		if (ret != 0) {
+			NOTICE("BL2: Failed to DRAM initialize (%d).\n", ret);
+			panic();
+		}
+		rzg_qos_init();
+	}
+
+	/* Set up FDT */
+	ret = fdt_create_empty_tree(fdt, sizeof(fdt_blob));
+	if (ret != 0) {
+		NOTICE("BL2: Cannot allocate FDT for U-Boot (ret=%i)\n", ret);
+		panic();
+	}
+
+	/* Add platform compatible string */
+	bl2_populate_compatible_string(fdt);
+
+	/* Print DRAM layout */
+	bl2_advertise_dram_size(product);
+
+	if (boot_dev == MODEMR_BOOT_DEV_EMMC_25X1 ||
+	    boot_dev == MODEMR_BOOT_DEV_EMMC_50X8) {
+		if (rcar_emmc_init() != EMMC_SUCCESS) {
+			NOTICE("BL2: Failed to eMMC driver initialize.\n");
+			panic();
+		}
+		rcar_emmc_memcard_power(EMMC_POWER_ON);
+		if (rcar_emmc_mount() != EMMC_SUCCESS) {
+			NOTICE("BL2: Failed to eMMC mount operation.\n");
+			panic();
+		}
+	} else {
+		rcar_rpc_init();
+		rcar_dma_init();
+	}
+
+	reg = mmio_read_32(RST_WDTRSTCR);
+	reg &= ~WDTRSTCR_RWDT_RSTMSK;
+	reg |= WDTRSTCR_PASSWORD;
+	mmio_write_32(RST_WDTRSTCR, reg);
+
+	mmio_write_32(CPG_CPGWPR, CPGWPR_PASSWORD);
+	mmio_write_32(CPG_CPGWPCR, CPGWPCR_PASSWORD);
+
+	reg = mmio_read_32(RCAR_PRR);
+	if ((reg & RCAR_CPU_MASK_CA57) == RCAR_CPU_HAVE_CA57) {
+		mmio_write_32(CPG_CA57DBGRCR,
+			      DBGCPUPREN | mmio_read_32(CPG_CA57DBGRCR));
+	}
+
+	if ((reg & RCAR_CPU_MASK_CA53) == RCAR_CPU_HAVE_CA53) {
+		mmio_write_32(CPG_CA53DBGRCR,
+			      DBGCPUPREN | mmio_read_32(CPG_CA53DBGRCR));
+	}
+
+	if (product_cut == PRR_PRODUCT_H3_CUT10) {
+		reg = mmio_read_32(CPG_PLL2CR);
+		reg &= ~((uint32_t)1 << 5);
+		mmio_write_32(CPG_PLL2CR, reg);
+
+		reg = mmio_read_32(CPG_PLL4CR);
+		reg &= ~((uint32_t)1 << 5);
+		mmio_write_32(CPG_PLL4CR, reg);
+
+		reg = mmio_read_32(CPG_PLL0CR);
+		reg &= ~((uint32_t)1 << 12);
+		mmio_write_32(CPG_PLL0CR, reg);
+	}
+#if (RCAR_LOSSY_ENABLE == 1)
+	NOTICE("BL2: Lossy Decomp areas\n");
+
+	fcnlnode = fdt_add_subnode(fdt, 0, "reserved-memory");
+	if (fcnlnode < 0) {
+		NOTICE("BL2: Cannot create reserved mem node (ret=%i)\n",
+		       fcnlnode);
+		panic();
+	}
+
+	bl2_lossy_setting(0, LOSSY_ST_ADDR0, LOSSY_END_ADDR0,
+			  LOSSY_FMT0, LOSSY_ENA_DIS0, fcnlnode);
+	bl2_lossy_setting(1, LOSSY_ST_ADDR1, LOSSY_END_ADDR1,
+			  LOSSY_FMT1, LOSSY_ENA_DIS1, fcnlnode);
+	bl2_lossy_setting(2, LOSSY_ST_ADDR2, LOSSY_END_ADDR2,
+			  LOSSY_FMT2, LOSSY_ENA_DIS2, fcnlnode);
+#endif /* RCAR_LOSSY_ENABLE */
+
+	fdt_pack(fdt);
+	NOTICE("BL2: FDT at %p\n", fdt);
+
+	if (boot_dev == MODEMR_BOOT_DEV_EMMC_25X1 ||
+	    boot_dev == MODEMR_BOOT_DEV_EMMC_50X8) {
+		rcar_io_emmc_setup();
+	} else {
+		rcar_io_setup();
+	}
+}
+
+void bl2_el3_plat_arch_setup(void)
+{
+#if RCAR_BL2_DCACHE == 1
+	NOTICE("BL2: D-Cache enable\n");
+	rcar_configure_mmu_el3(BL2_BASE,
+			       BL2_END - BL2_BASE,
+			       BL2_RO_BASE, BL2_RO_LIMIT
+#if USE_COHERENT_MEM
+			       , BL2_COHERENT_RAM_BASE, BL2_COHERENT_RAM_LIMIT
+#endif /* USE_COHERENT_MEM */
+	    );
+#endif /* RCAR_BL2_DCACHE == 1 */
+}
+
+void bl2_platform_setup(void)
+{
+	/*
+	 * Place holder for performing any platform initialization specific
+	 * to BL2.
+	 */
+}
+
+static void bl2_init_generic_timer(void)
+{
+	uint32_t reg_cntfid;
+	uint32_t modemr;
+	uint32_t modemr_pll;
+	uint32_t pll_table[] = {
+		EXTAL_MD14_MD13_TYPE_0,	/* MD14/MD13 : 0b00 */
+		EXTAL_MD14_MD13_TYPE_1,	/* MD14/MD13 : 0b01 */
+		EXTAL_MD14_MD13_TYPE_2,	/* MD14/MD13 : 0b10 */
+		EXTAL_MD14_MD13_TYPE_3	/* MD14/MD13 : 0b11 */
+	};
+
+	modemr = mmio_read_32(RCAR_MODEMR);
+	modemr_pll = (modemr & MODEMR_BOOT_PLL_MASK);
+
+	/* Set frequency data in CNTFID0 */
+	reg_cntfid = pll_table[modemr_pll >> MODEMR_BOOT_PLL_SHIFT];
+
+	/* Update memory mapped and register based frequency */
+	write_cntfrq_el0((u_register_t)reg_cntfid);
+	mmio_write_32(ARM_SYS_CNTCTL_BASE + (uintptr_t)CNTFID_OFF, reg_cntfid);
+	/* Enable counter */
+	mmio_setbits_32(RCAR_CNTC_BASE + (uintptr_t)CNTCR_OFF,
+			(uint32_t)CNTCR_EN);
+}
diff --git a/plat/renesas/rzg/platform.mk b/plat/renesas/rzg/platform.mk
new file mode 100644
index 000000000..421cbbe64
--- /dev/null
+++ b/plat/renesas/rzg/platform.mk
@@ -0,0 +1,222 @@
+#
+# Copyright (c) 2018-2020, Renesas Electronics Corporation. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+include plat/renesas/common/common.mk
+
+ifndef LSI
+  $(error "Error: Unknown LSI. Please use LSI=<LSI name> to specify the LSI")
+else
+  ifeq (${LSI},AUTO)
+    RCAR_LSI:=${RCAR_AUTO}
+  else ifeq (${LSI},G2M)
+    RCAR_LSI:=${RZ_G2M}
+    ifndef LSI_CUT
+      # enable compatible function.
+      RCAR_LSI_CUT_COMPAT := 1
+      $(eval $(call add_define,RCAR_LSI_CUT_COMPAT))
+    else
+      # disable compatible function.
+      ifeq (${LSI_CUT},10)
+        RCAR_LSI_CUT:=0
+      else ifeq (${LSI_CUT},11)
+        RCAR_LSI_CUT:=1
+      else ifeq (${LSI_CUT},13)
+        RCAR_LSI_CUT:=3
+      else ifeq (${LSI_CUT},30)
+        RCAR_LSI_CUT:=20
+      else
+        $(error "Error: ${LSI_CUT} is not supported.")
+      endif
+      $(eval $(call add_define,RCAR_LSI_CUT))
+    endif
+  else
+    $(error "Error: ${LSI} is not supported.")
+  endif
+  $(eval $(call add_define,RCAR_LSI))
+endif
+
+# Process RZG_LCS_STATE_DETECTION_ENABLE flag
+# Enable to get LCS state information
+ifndef RZG_LCS_STATE_DETECTION_ENABLE
+RZG_LCS_STATE_DETECTION_ENABLE := 0
+endif
+$(eval $(call add_define,RZG_LCS_STATE_DETECTION_ENABLE))
+
+# Process RCAR_SECURE_BOOT flag
+ifndef RCAR_SECURE_BOOT
+RCAR_SECURE_BOOT := 0
+endif
+$(eval $(call add_define,RCAR_SECURE_BOOT))
+
+# LCS state of RZ/G2 Chip is all CM.
+# However certain chips(RZ/G2M and RZ/G2E) have incorrect factory Fuse settings
+# which results in getting incorrect LCS states
+# if need to enable RCAR_SECURE_BOOT, make sure the chip has proper factory Fuse settings.
+ifeq (${RCAR_SECURE_BOOT},1)
+  ifeq (${RZG_LCS_STATE_DETECTION_ENABLE},0)
+    $(error "Error: Please check the chip has proper factory Fuse settings and set RZG_LCS_STATE_DETECTION_ENABLE to enable.")
+  endif
+endif
+
+# lock RPC HYPERFLASH access by default
+# unlock to repogram the ATF firmware from u-boot
+ifndef RCAR_RPC_HYPERFLASH_LOCKED
+RCAR_RPC_HYPERFLASH_LOCKED := 1
+endif
+$(eval $(call add_define,RCAR_RPC_HYPERFLASH_LOCKED))
+
+# Process RCAR_QOS_TYPE flag
+ifndef RCAR_QOS_TYPE
+RCAR_QOS_TYPE := 0
+endif
+$(eval $(call add_define,RCAR_QOS_TYPE))
+
+# Process RCAR_DRAM_SPLIT flag
+ifndef RCAR_DRAM_SPLIT
+RCAR_DRAM_SPLIT := 0
+endif
+$(eval $(call add_define,RCAR_DRAM_SPLIT))
+
+# Process RCAR_BL33_EXECUTION_EL flag
+ifndef RCAR_BL33_EXECUTION_EL
+RCAR_BL33_EXECUTION_EL := 0
+endif
+$(eval $(call add_define,RCAR_BL33_EXECUTION_EL))
+
+# Process RCAR_AVS_SETTING_ENABLE flag
+ifndef AVS_SETTING_ENABLE
+AVS_SETTING_ENABLE := 0
+endif
+$(eval $(call add_define,AVS_SETTING_ENABLE))
+
+# Process RCAR_LOSSY_ENABLE flag
+ifndef RCAR_LOSSY_ENABLE
+RCAR_LOSSY_ENABLE := 0
+endif
+$(eval $(call add_define,RCAR_LOSSY_ENABLE))
+
+# Process LIFEC_DBSC_PROTECT_ENABLE flag
+ifndef LIFEC_DBSC_PROTECT_ENABLE
+LIFEC_DBSC_PROTECT_ENABLE := 1
+endif
+$(eval $(call add_define,LIFEC_DBSC_PROTECT_ENABLE))
+
+# Process RCAR_GEN3_ULCB flag
+ifndef RCAR_GEN3_ULCB
+RCAR_GEN3_ULCB := 0
+endif
+
+# Process RCAR_REF_INT flag
+ifndef RCAR_REF_INT
+RCAR_REF_INT :=0
+endif
+$(eval $(call add_define,RCAR_REF_INT))
+
+# Process RCAR_REWT_TRAINING flag
+ifndef RCAR_REWT_TRAINING
+RCAR_REWT_TRAINING := 1
+endif
+$(eval $(call add_define,RCAR_REWT_TRAINING))
+
+# Process RCAR_SYSTEM_SUSPEND flag
+ifndef RCAR_SYSTEM_SUSPEND
+RCAR_SYSTEM_SUSPEND := 0
+endif
+$(eval $(call add_define,RCAR_SYSTEM_SUSPEND))
+
+# Process RCAR_DRAM_LPDDR4_MEMCONF flag
+ifndef RCAR_DRAM_LPDDR4_MEMCONF
+RCAR_DRAM_LPDDR4_MEMCONF :=1
+endif
+$(eval $(call add_define,RCAR_DRAM_LPDDR4_MEMCONF))
+
+# Process RCAR_DRAM_DDR3L_MEMCONF flag
+ifndef RCAR_DRAM_DDR3L_MEMCONF
+RCAR_DRAM_DDR3L_MEMCONF :=1
+endif
+$(eval $(call add_define,RCAR_DRAM_DDR3L_MEMCONF))
+
+# Process RCAR_DRAM_DDR3L_MEMDUAL flag
+ifndef RCAR_DRAM_DDR3L_MEMDUAL
+RCAR_DRAM_DDR3L_MEMDUAL :=1
+endif
+$(eval $(call add_define,RCAR_DRAM_DDR3L_MEMDUAL))
+
+# Process RCAR_BL33_ARG0 flag
+ifdef RCAR_BL33_ARG0
+$(eval $(call add_define,RCAR_BL33_ARG0))
+endif
+
+#Process RCAR_BL2_DCACHE flag
+ifndef RCAR_BL2_DCACHE
+RCAR_BL2_DCACHE := 0
+endif
+$(eval $(call add_define,RCAR_BL2_DCACHE))
+
+# Process RCAR_DRAM_CHANNEL flag
+ifndef RCAR_DRAM_CHANNEL
+RCAR_DRAM_CHANNEL :=15
+endif
+$(eval $(call add_define,RCAR_DRAM_CHANNEL))
+
+#Process RCAR_SYSTEM_RESET_KEEPON_DDR flag
+ifndef RCAR_SYSTEM_RESET_KEEPON_DDR
+RCAR_SYSTEM_RESET_KEEPON_DDR := 0
+endif
+$(eval $(call add_define,RCAR_SYSTEM_RESET_KEEPON_DDR))
+
+include drivers/renesas/rzg/ddr/ddr.mk
+include drivers/renesas/rzg/qos/qos.mk
+include drivers/renesas/rzg/pfc/pfc.mk
+include lib/libfdt/libfdt.mk
+
+PLAT_INCLUDES	+=	-Idrivers/renesas/rzg/ddr		\
+			-Idrivers/renesas/rzg/qos		\
+			-Idrivers/renesas/rzg/board		\
+			-Idrivers/renesas/common		\
+			-Idrivers/renesas/common/iic_dvfs	\
+			-Idrivers/renesas/common/avs		\
+			-Idrivers/renesas/common/delay		\
+			-Idrivers/renesas/common/rom		\
+			-Idrivers/renesas/common/scif		\
+			-Idrivers/renesas/common/emmc		\
+			-Idrivers/renesas/common/pwrc		\
+			-Idrivers/renesas/common/io
+
+BL2_SOURCES	+=	plat/renesas/rzg/bl2_plat_setup.c	\
+			drivers/renesas/rzg/board/board.c
+
+# build the layout images for the bootrom and the necessary srecords
+rzg: rzg_layout_create rzg_srecord
+distclean realclean clean: clean_layout_tool clean_srecord
+
+# layout images
+LAYOUT_TOOLPATH ?= tools/renesas/rzg_layout_create
+
+clean_layout_tool:
+	@echo "clean layout tool"
+	${Q}${MAKE} -C ${LAYOUT_TOOLPATH} clean
+
+.PHONY: rzg_layout_create
+rzg_layout_create:
+	@echo "generating layout srecs"
+	${Q}${MAKE} CPPFLAGS="-D=AARCH64" --no-print-directory -C ${LAYOUT_TOOLPATH}
+
+# srecords
+SREC_PATH	= ${BUILD_PLAT}
+BL2_ELF_SRC	= ${SREC_PATH}/bl2/bl2.elf
+BL31_ELF_SRC	= ${SREC_PATH}/bl31/bl31.elf
+
+clean_srecord:
+	@echo "clean bl2 and bl31 srecs"
+	rm -f ${SREC_PATH}/bl2.srec ${SREC_PATH}/bl31.srec
+
+.PHONY: rzg_srecord
+rzg_srecord: $(BL2_ELF_SRC) $(BL31_ELF_SRC)
+	@echo "generating srec: ${SREC_PATH}/bl2.srec"
+	$(Q)$(OC) -O srec --srec-forceS3 ${BL2_ELF_SRC}  ${SREC_PATH}/bl2.srec
+	@echo "generating srec: ${SREC_PATH}/bl31.srec"
+	$(Q)$(OC) -O srec --srec-forceS3 ${BL31_ELF_SRC} ${SREC_PATH}/bl31.srec
diff --git a/tools/renesas/rzg_layout_create/makefile b/tools/renesas/rzg_layout_create/makefile
new file mode 100644
index 000000000..2d438b923
--- /dev/null
+++ b/tools/renesas/rzg_layout_create/makefile
@@ -0,0 +1,118 @@
+#
+# Copyright (c) 2020, Renesas Electronics Corporation. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+###################################################
+# makefile
+###################################################
+
+#output file name
+FILE_NAME_SA0 = bootparam_sa0
+FILE_NAME_SA6 = cert_header_sa6
+
+OUTPUT_FILE_SA0 = $(FILE_NAME_SA0).elf
+OUTPUT_FILE_SA6 = $(FILE_NAME_SA6).elf
+
+#object file name
+OBJ_FILE_SA0 = sa0.o
+OBJ_FILE_SA6 = sa6.o
+
+#linker script name
+MEMORY_DEF_SA0 = sa0.ld.S
+MEMORY_DEF_SA6 = sa6.ld.S
+
+###################################################
+# Convenience function for adding build definitions
+# $(eval $(call add_define,FOO)) will have:
+# -DFOO if $(FOO) is empty; -DFOO=$(FOO) otherwise
+define add_define
+DEFINES += -D$(1)$(if $(value $(1)),=$(value $(1)),)
+endef
+
+# Process RCAR_SA0_SIZE flag
+ifndef RCAR_SA0_SIZE
+RCAR_SA0_SIZE := 1
+else
+ifeq (${RCAR_SA0_SIZE},0)
+RCAR_SA0_SIZE := 0
+else
+RCAR_SA0_SIZE := 1
+endif
+endif
+$(eval $(call add_define,RCAR_SA0_SIZE))
+
+# Process RCAR_SA6_TYPE flag
+ifndef RCAR_SA6_TYPE
+RCAR_SA6_TYPE := 0
+else
+ifeq (${RCAR_SA6_TYPE},0)
+RCAR_SA6_TYPE := 0
+else
+RCAR_SA6_TYPE := 1
+endif
+endif
+$(eval $(call add_define,RCAR_SA6_TYPE))
+
+RCAR_VMA_ADJUST_ADDR := 0xE6320000
+$(eval $(call add_define,RCAR_VMA_ADJUST_ADDR))
+
+
+###################################################
+
+#c compiler
+CC = $(CROSS_COMPILE)gcc
+CFLAGS += ${DEFINES}
+CFLAGS += -nostdinc \
+	  -I../../../include/lib/libc \
+	  -I../../../include/lib/libc/aarch64
+
+#Linker
+LD = $(CROSS_COMPILE)ld
+
+#objcopy
+objcopy = $(CROSS_COMPILE)objcopy
+
+#clean
+CL = rm -f
+
+###################################################
+.SUFFIXES : .s .c .o
+
+###################################################
+# command
+
+.PHONY: all
+all: $(OUTPUT_FILE_SA0) $(OUTPUT_FILE_SA6)
+###################################################
+# Linker
+###################################################
+$(OUTPUT_FILE_SA0) : $(MEMORY_DEF_SA0) $(OBJ_FILE_SA0)
+	$(LD) $(OBJ_FILE_SA0)		 	\
+	-T $(MEMORY_DEF_SA0)			\
+	-o $(OUTPUT_FILE_SA0)			\
+	-Map $(FILE_NAME_SA0).map 		\
+
+	$(objcopy) -O srec --adjust-vma=$(RCAR_VMA_ADJUST_ADDR) --srec-forceS3  $(OUTPUT_FILE_SA0) $(FILE_NAME_SA0).srec
+	$(objcopy) -O binary --adjust-vma=$(RCAR_VMA_ADJUST_ADDR) --srec-forceS3  $(OUTPUT_FILE_SA0) $(FILE_NAME_SA0).bin
+
+$(OUTPUT_FILE_SA6) : $(MEMORY_DEF_SA6) $(OBJ_FILE_SA6)
+	$(LD) $(OBJ_FILE_SA6)		 	\
+	-T $(MEMORY_DEF_SA6)			\
+	-o $(OUTPUT_FILE_SA6)			\
+	-Map $(FILE_NAME_SA6).map 		\
+
+	$(objcopy) -O srec --adjust-vma=$(RCAR_VMA_ADJUST_ADDR) --srec-forceS3  $(OUTPUT_FILE_SA6) $(FILE_NAME_SA6).srec
+	$(objcopy) -O binary --adjust-vma=$(RCAR_VMA_ADJUST_ADDR) --srec-forceS3  $(OUTPUT_FILE_SA6) $(FILE_NAME_SA6).bin
+
+###################################################
+# Compile
+###################################################
+
+%.o:../%.c
+	$(CC) -c -I $< -o $@
+
+.PHONY: clean
+clean:
+	$(CL)  *.bin *.map *.srec *.elf *.o
diff --git a/tools/renesas/rzg_layout_create/sa0.c b/tools/renesas/rzg_layout_create/sa0.c
new file mode 100644
index 000000000..763d3a536
--- /dev/null
+++ b/tools/renesas/rzg_layout_create/sa0.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2020, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#define RCAR_SA0_SIZE_SMALL	(0)	/* for RZ/G2E */
+#define RCAR_SA0_SIZE_NORMAL	(1)	/* for RZ/G2[HMN] */
+
+#define BL2_ADDRESS	(0xE6304000)	/* BL2 start address */
+
+#if (RCAR_SA0_SIZE == RCAR_SA0_SIZE_SMALL)
+#define BL2_SIZE	(80*1024/4)	/* BL2 size is 80KB(0x00005000) */
+#else  /* (RCAR_SA0_SIZE == RCAR_SA0_SIZE_SMALL) */
+#define BL2_SIZE	(170*1024/4)	/* BL2 size is 170KB(0x0000AA00) */
+#endif /* (RCAR_SA0_SIZE == RCAR_SA0_SIZE_SMALL) */
+
+/* SA0 */
+/* 0x00000000 */
+const unsigned int __attribute__ ((section(".sa0_bootrom"))) bootrom_paramA = 0x00000100;
+/* 0x00000080 (Map Type 3 for eMMC Boot)*/
+/* 0x000001D4 */
+const unsigned int __attribute__ ((section(".sa0_bl2dst_addr3"))) bl2dst_addr3 = BL2_ADDRESS;
+/* 0x000002E4 */
+const unsigned int __attribute__ ((section(".sa0_bl2dst_size3"))) bl2dst_size3 = BL2_SIZE;
+/* 0x00000C00 (Map Type 1 for HyperFlash/QSPI Flash Boot)*/
+/* 0x00000D54 */
+const unsigned int __attribute__ ((section(".sa0_bl2dst_addr1"))) bl2dst_addr1 = BL2_ADDRESS;
+/* 0x00000E64 */
+const unsigned int __attribute__ ((section(".sa0_bl2dst_size1"))) bl2dst_size1 = BL2_SIZE;
diff --git a/tools/renesas/rzg_layout_create/sa0.ld.S b/tools/renesas/rzg_layout_create/sa0.ld.S
new file mode 100644
index 000000000..23e2b237f
--- /dev/null
+++ b/tools/renesas/rzg_layout_create/sa0.ld.S
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2020, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+SECTIONS
+{
+	. = 0x00000000;
+	.rodata : {
+		KEEP(*(.sa0_bootrom))
+		/* Map Type 3 for eMMC Boot */
+                /* A-side IPL content cert "Start Address" */
+		. = 0x000001D4;		/* H'00000080 + H'00000154 */
+		KEEP(*(.sa0_bl2dst_addr3))
+                /* A-side IPL content cert "Size" */
+		. = 0x000002E4;		/* H'00000080 + H'00000264 */
+		KEEP(*(.sa0_bl2dst_size3))
+		/* Map Type 1 for HyperFlash/QSPI Flash Boot */
+		/* A-side IPL content cert "Start Address" */
+		. = 0x00000D54;		/* H'00000C00 + H'00000154 */
+		KEEP(*(.sa0_bl2dst_addr1))
+		/* A-side IPL content cert "Size" */
+		. = 0x00000E64;		/* H'00000C00 + H'00000264 */
+		KEEP(*(.sa0_bl2dst_size1))
+	}
+
+}
diff --git a/tools/renesas/rzg_layout_create/sa6.c b/tools/renesas/rzg_layout_create/sa6.c
new file mode 100644
index 000000000..76e3dc5e3
--- /dev/null
+++ b/tools/renesas/rzg_layout_create/sa6.c
@@ -0,0 +1,236 @@
+/*
+ * Copyright (c) 2020, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#define RCAR_SA6_TYPE_QSPIFLASH		(0)
+#define RCAR_SA6_TYPE_EMMC		(1)
+
+#if (RCAR_SA6_TYPE == RCAR_SA6_TYPE_QSPIFLASH)
+
+/* Number of content cert for Non-secure Target Program(BL33x) */
+#define RCAR_IMAGE_NUM			(0x00000001U)
+/* Source address on flash for BL31 */
+#define RCAR_BL31SRC_ADDRESS		(0x001C0000U)
+/* Reserved */
+#define RCAR_BL31_PARTITION		(0x00000000U)
+/* Source address on flash for BL32 */
+#define RCAR_BL32SRC_ADDRESS		(0x00200000U)
+/* Reserved */
+#define RCAR_BL32_PARTITION		(0x00000000U)
+/* Source address on flash for BL33 */
+#define RCAR_BL33SRC_ADDRESS		(0x00300000U)
+/* Reserved */
+#define RCAR_BL33_PARTITION		(0x00000000U)
+#define RCAR_BL332SRC_ADDRESS		(0x00000000U)
+/* Reserved */
+#define RCAR_BL332_PARTITION		(0x00000000U)
+#define RCAR_BL333SRC_ADDRESS		(0x00000000U)
+/* Reserved */
+#define RCAR_BL333_PARTITION		(0x00000000U)
+#define RCAR_BL334SRC_ADDRESS		(0x00000000U)
+/* Reserved */
+#define RCAR_BL334_PARTITION		(0x00000000U)
+#define RCAR_BL335SRC_ADDRESS		(0x00000000U)
+/* Reserved */
+#define RCAR_BL335_PARTITION		(0x00000000U)
+#define RCAR_BL336SRC_ADDRESS		(0x00000000U)
+/* Reserved */
+#define RCAR_BL336_PARTITION		(0x00000000U)
+#define RCAR_BL337SRC_ADDRESS		(0x00000000U)
+/* Reserved */
+#define RCAR_BL337_PARTITION		(0x00000000U)
+#define RCAR_BL338SRC_ADDRESS		(0x00000000U)
+/* Reserved */
+#define RCAR_BL338_PARTITION		(0x00000000U)
+
+#else /* RCAR_SA6_TYPE == RCAR_SA6_TYPE_EMMC */
+
+/* Number of content cert for Non-secure Target Program(BL33x) */
+#define RCAR_IMAGE_NUM			(0x00000001U)
+/* Source address on eMMC for BL31 */
+#define RCAR_BL31SRC_ADDRESS		(0x00040000U)
+/* Source partition on eMMC for BL31 */
+#define RCAR_BL31_PARTITION		(0x00000001U)
+/* Source address on eMMC for BL32 */
+#define RCAR_BL32SRC_ADDRESS		(0x00200000U)
+/* Source partition on eMMC for BL32 */
+#define RCAR_BL32_PARTITION		(0x00000001U)
+/* Source address on eMMC for BL33 */
+#define RCAR_BL33SRC_ADDRESS		(0x00000000U)
+/* Source partition on eMMC for BL33 */
+#define RCAR_BL33_PARTITION		(0x00000002U)
+/* Reserved */
+#define RCAR_BL332SRC_ADDRESS		(0x00000000U)
+#define RCAR_BL332_PARTITION		(0x00000000U)
+/* Reserved */
+#define RCAR_BL333SRC_ADDRESS		(0x00000000U)
+#define RCAR_BL333_PARTITION		(0x00000000U)
+/* Reserved */
+#define RCAR_BL334SRC_ADDRESS		(0x00000000U)
+#define RCAR_BL334_PARTITION		(0x00000000U)
+/* Reserved */
+#define RCAR_BL335SRC_ADDRESS		(0x00000000U)
+#define RCAR_BL335_PARTITION		(0x00000000U)
+/* Reserved */
+#define RCAR_BL336SRC_ADDRESS		(0x00000000U)
+#define RCAR_BL336_PARTITION		(0x00000000U)
+/* Reserved */
+#define RCAR_BL337SRC_ADDRESS		(0x00000000U)
+#define RCAR_BL337_PARTITION		(0x00000000U)
+/* Reserved */
+#define RCAR_BL338SRC_ADDRESS		(0x00000000U)
+#define RCAR_BL338_PARTITION		(0x00000000U)
+
+#endif /* RCAR_SA6_TYPE == RCAR_SA6_TYPE_QSPIFLASH */
+
+/* Destination address for BL31 */
+#define RCAR_BL31DST_ADDRESS		(0x44000000U)
+#define RCAR_BL31DST_ADDRESSH		(0x00000000U)
+/* Destination size for BL31 */
+#define RCAR_BL31DST_SIZE		(0x00004000U)
+/* Destination address for BL32 */
+#define RCAR_BL32DST_ADDRESS		(0x44100000U)
+#define RCAR_BL32DST_ADDRESSH		(0x00000000U)
+/* Destination size for BL32 */
+#define RCAR_BL32DST_SIZE		(0x00040000U)
+/* Destination address for BL33 */
+#define RCAR_BL33DST_ADDRESS		(0x50000000U)
+#define RCAR_BL33DST_ADDRESSH		(0x00000000U)
+/* Destination size for BL33 */
+#define RCAR_BL33DST_SIZE		(0x00040000U)
+/* Reserved */
+#define RCAR_BL332DST_ADDRESS		(0x00000000U)
+#define RCAR_BL332DST_ADDRESSH		(0x00000000U)
+#define RCAR_BL332DST_SIZE		(0x00000000U)
+/* Reserved */
+#define RCAR_BL333DST_ADDRESS		(0x00000000U)
+#define RCAR_BL333DST_ADDRESSH		(0x00000000U)
+#define RCAR_BL333DST_SIZE		(0x00000000U)
+/* Reserved */
+#define RCAR_BL334DST_ADDRESS		(0x00000000U)
+#define RCAR_BL334DST_ADDRESSH		(0x00000000U)
+#define RCAR_BL334DST_SIZE		(0x00000000U)
+/* Reserved */
+#define RCAR_BL335DST_ADDRESS		(0x00000000U)
+#define RCAR_BL335DST_ADDRESSH		(0x00000000U)
+#define RCAR_BL335DST_SIZE		(0x00000000U)
+/* Reserved */
+#define RCAR_BL336DST_ADDRESS		(0x00000000U)
+#define RCAR_BL336DST_ADDRESSH		(0x00000000U)
+#define RCAR_BL336DST_SIZE		(0x00000000U)
+/* Reserved */
+#define RCAR_BL337DST_ADDRESS		(0x00000000U)
+#define RCAR_BL337DST_ADDRESSH		(0x00000000U)
+#define RCAR_BL337DST_SIZE		(0x00000000U)
+/* Reserved */
+#define RCAR_BL338DST_ADDRESS		(0x00000000U)
+#define RCAR_BL338DST_ADDRESSH		(0x00000000U)
+#define RCAR_BL338DST_SIZE		(0x00000000U)
+
+/* SA6 */
+const uint64_t __attribute__ ((section(".sa6_image_num")))
+				image_num	= RCAR_IMAGE_NUM;
+const uint64_t __attribute__ ((section(".sa6_bl31src_addr")))
+				bl31src_addr	= RCAR_BL31SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl31partition")))
+				bl31partition	= RCAR_BL31_PARTITION;
+const uint64_t __attribute__ ((section(".sa6_bl32src_addr")))
+				bl32src_addr	= RCAR_BL32SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl32partition")))
+				bl32partition	= RCAR_BL32_PARTITION;
+const uint64_t __attribute__ ((section(".sa6_bl33src_addr")))
+				bl33src_addr	= RCAR_BL33SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl33partition")))
+				bl33partition	= RCAR_BL33_PARTITION;
+const uint64_t __attribute__ ((section(".sa6_bl332src_addr")))
+				bl332src_addr	= RCAR_BL332SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl332partition")))
+				bl332partition	= RCAR_BL332_PARTITION;
+const uint64_t __attribute__ ((section(".sa6_bl333src_addr")))
+				bl333src_addr	= RCAR_BL333SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl333partition")))
+				bl333partition	= RCAR_BL333_PARTITION;
+const uint64_t __attribute__ ((section(".sa6_bl334src_addr")))
+				bl334src_addr	= RCAR_BL334SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl334partition")))
+				bl334partition	= RCAR_BL334_PARTITION;
+const uint64_t __attribute__ ((section(".sa6_bl335src_addr")))
+				bl335src_addr	= RCAR_BL335SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl335partition")))
+				bl335partition	= RCAR_BL335_PARTITION;
+const uint64_t __attribute__ ((section(".sa6_bl336src_addr")))
+				bl336src_addr	= RCAR_BL336SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl336partition")))
+				bl336partition	= RCAR_BL336_PARTITION;
+const uint64_t __attribute__ ((section(".sa6_bl337src_addr")))
+				bl337src_addr	= RCAR_BL337SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl337partition")))
+				bl337partition	= RCAR_BL337_PARTITION;
+const uint64_t __attribute__ ((section(".sa6_bl338src_addr")))
+				bl338src_addr	= RCAR_BL338SRC_ADDRESS;
+const uint64_t __attribute__ ((section(".sa6_bl338partition")))
+				bl338partition	= RCAR_BL338_PARTITION;
+const uint32_t __attribute__ ((section(".sa6_bl31dst_addr")))
+				bl31dst_addr	= RCAR_BL31DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl31dst_addrh")))
+				bl31dst_addrh	= RCAR_BL31DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl31dst_size")))
+				bl31dst_size	= RCAR_BL31DST_SIZE;
+const uint32_t __attribute__ ((section(".sa6_bl32dst_addr")))
+				bl32dst_addr	= RCAR_BL32DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl32dst_addrh")))
+				bl32dst_addrh	= RCAR_BL32DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl32dst_size")))
+				bl32dst_size	= RCAR_BL32DST_SIZE;
+const uint32_t __attribute__ ((section(".sa6_bl33dst_addr")))
+				bl33dst_addr	= RCAR_BL33DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl33dst_addrh")))
+				bl33dst_addrh	= RCAR_BL33DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl33dst_size")))
+				bl33dst_size	= RCAR_BL33DST_SIZE;
+const uint32_t __attribute__ ((section(".sa6_bl332dst_addr")))
+				bl332dst_addr	= RCAR_BL332DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl332dst_addrh")))
+				bl332dst_addrh	= RCAR_BL332DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl332dst_size")))
+				bl332dst_size	= RCAR_BL332DST_SIZE;
+const uint32_t __attribute__ ((section(".sa6_bl333dst_addr")))
+				bl333dst_addr	= RCAR_BL333DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl333dst_addrh")))
+				bl333dst_addrh	= RCAR_BL333DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl333dst_size")))
+				bl333dst_size	= RCAR_BL333DST_SIZE;
+const uint32_t __attribute__ ((section(".sa6_bl334dst_addr")))
+				bl334dst_addr	= RCAR_BL334DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl334dst_addrh")))
+				bl334dst_addrh	= RCAR_BL334DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl334dst_size")))
+				bl334dst_size	= RCAR_BL334DST_SIZE;
+const uint32_t __attribute__ ((section(".sa6_bl335dst_addr")))
+				bl335dst_addr	= RCAR_BL335DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl335dst_addrh")))
+				bl335dst_addrh	= RCAR_BL335DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl335dst_size")))
+				bl335dst_size	= RCAR_BL335DST_SIZE;
+const uint32_t __attribute__ ((section(".sa6_bl336dst_addr")))
+				bl336dst_addr	= RCAR_BL336DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl336dst_addrh")))
+				bl336dst_addrh	= RCAR_BL336DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl336dst_size")))
+				bl336dst_size	= RCAR_BL336DST_SIZE;
+const uint32_t __attribute__ ((section(".sa6_bl337dst_addr")))
+				bl337dst_addr	= RCAR_BL337DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl337dst_addrh")))
+				bl337dst_addrh	= RCAR_BL337DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl337dst_size")))
+				bl337dst_size	= RCAR_BL337DST_SIZE;
+const uint32_t __attribute__ ((section(".sa6_bl338dst_addr")))
+				bl338dst_addr	= RCAR_BL338DST_ADDRESS;
+const uint32_t __attribute__ ((section(".sa6_bl338dst_addrh")))
+				bl338dst_addrh	= RCAR_BL338DST_ADDRESSH;
+const uint32_t __attribute__ ((section(".sa6_bl338dst_size")))
+				bl338dst_size	= RCAR_BL338DST_SIZE;
diff --git a/tools/renesas/rzg_layout_create/sa6.ld.S b/tools/renesas/rzg_layout_create/sa6.ld.S
new file mode 100644
index 000000000..efe40b0c8
--- /dev/null
+++ b/tools/renesas/rzg_layout_create/sa6.ld.S
@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2020, Renesas Electronics Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+SECTIONS
+{
+	. = 0x00000000;
+	.rodata : {
+		KEEP(*(.sa6_image_num))
+		. = 0x00000008;
+		KEEP(*(.sa6_bl31src_addr))
+		. = 0x00000010;
+		KEEP(*(.sa6_bl31partition))
+		. = 0x00000018;
+		KEEP(*(.sa6_bl32src_addr))
+		. = 0x00000020;
+		KEEP(*(.sa6_bl32partition))
+		. = 0x00000028;
+		KEEP(*(.sa6_bl33src_addr))
+		. = 0x00000030;
+		KEEP(*(.sa6_bl33partition))
+		. = 0x00000038;
+		KEEP(*(.sa6_bl332src_addr))
+		. = 0x00000040;
+		KEEP(*(.sa6_bl332partition))
+		. = 0x00000048;
+		KEEP(*(.sa6_bl333src_addr))
+		. = 0x00000050;
+		KEEP(*(.sa6_bl333partition))
+		. = 0x00000058;
+		KEEP(*(.sa6_bl334src_addr))
+		. = 0x00000060;
+		KEEP(*(.sa6_bl334partition))
+		. = 0x00000068;
+		KEEP(*(.sa6_bl335src_addr))
+		. = 0x00000070;
+		KEEP(*(.sa6_bl335partition))
+		. = 0x00000078;
+		KEEP(*(.sa6_bl336src_addr))
+		. = 0x00000080;
+		KEEP(*(.sa6_bl336partition))
+		. = 0x00000088;
+		KEEP(*(.sa6_bl337src_addr))
+		. = 0x00000090;
+		KEEP(*(.sa6_bl337partition))
+		. = 0x00000098;
+		KEEP(*(.sa6_bl338src_addr))
+		. = 0x000000A0;
+		KEEP(*(.sa6_bl338partition))
+		. = 0x00000554;
+		KEEP(*(.sa6_bl31dst_addr))
+		. = 0x00000558;
+		KEEP(*(.sa6_bl31dst_addrh))
+		. = 0x00000664;
+		KEEP(*(.sa6_bl31dst_size))
+		. = 0x00000D54;
+		KEEP(*(.sa6_bl32dst_addr))
+		. = 0x00000D58;
+		KEEP(*(.sa6_bl32dst_addrh))
+		. = 0x00000E64;
+		KEEP(*(.sa6_bl32dst_size))
+		. = 0x00001554;
+		KEEP(*(.sa6_bl33dst_addr))
+		. = 0x00001558;
+		KEEP(*(.sa6_bl33dst_addrh))
+		. = 0x00001664;
+		KEEP(*(.sa6_bl33dst_size))
+		. = 0x00001D54;
+		KEEP(*(.sa6_bl332dst_addr))
+		. = 0x00001D58;
+		KEEP(*(.sa6_bl332dst_addrh))
+		. = 0x00001E64;
+		KEEP(*(.sa6_bl332dst_size))
+		. = 0x00002554;
+		KEEP(*(.sa6_bl333dst_addr))
+		. = 0x00002558;
+		KEEP(*(.sa6_bl333dst_addrh))
+		. = 0x00002664;
+		KEEP(*(.sa6_bl333dst_size))
+		. = 0x00002D54;
+		KEEP(*(.sa6_bl334dst_addr))
+		. = 0x00002D58;
+		KEEP(*(.sa6_bl334dst_addrh))
+		. = 0x00002E64;
+		KEEP(*(.sa6_bl334dst_size))
+		. = 0x00003554;
+		KEEP(*(.sa6_bl335dst_addr))
+		. = 0x00003558;
+		KEEP(*(.sa6_bl335dst_addrh))
+		. = 0x00003664;
+		KEEP(*(.sa6_bl335dst_size))
+		. = 0x00003D54;
+		KEEP(*(.sa6_bl336dst_addr))
+		. = 0x00003D58;
+		KEEP(*(.sa6_bl336dst_addrh))
+		. = 0x00003E64;
+		KEEP(*(.sa6_bl336dst_size))
+		. = 0x00004554;
+		KEEP(*(.sa6_bl337dst_addr))
+		. = 0x00004558;
+		KEEP(*(.sa6_bl337dst_addrh))
+		. = 0x00004664;
+		KEEP(*(.sa6_bl337dst_size))
+		. = 0x00004D54;
+		KEEP(*(.sa6_bl338dst_addr))
+		. = 0x00004D58;
+		KEEP(*(.sa6_bl338dst_addrh))
+		. = 0x00004E64;
+		KEEP(*(.sa6_bl338dst_size))
+	}
+
+}