plat/arm: Mark arm platform initialization functions

Mark the initialization functions found in the BL31 boot sequence
as __init so they can be reclaimed when no longer needed.

Change-Id: I687a89346419c7710ef5097feaa325d83c527697
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>

plat/arm/board/fvp/drivers/pwrc/fvp_pwrc.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */
@@ -70,7 +70,7 @@ void fvp_pwrc_write_pcoffr(u_register_t mpidr)
 }
 
 /* Nothing else to do here apart from initializing the lock */
-void plat_arm_pwrc_setup(void)
+void __init plat_arm_pwrc_setup(void)
 {
 	arm_lock_init();
 }

plat/arm/board/fvp/fvp_bl31_setup.c

@@ -10,8 +10,8 @@
 #include <smmu_v3.h>
 #include "fvp_private.h"
 
-void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+void __init bl31_early_platform_setup2(u_register_t arg0,
-		u_register_t arg2, u_register_t arg3)
+		u_register_t arg1, u_register_t arg2, u_register_t arg3)
 {
 	arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
 

plat/arm/board/fvp/fvp_common.c

@@ -241,7 +241,7 @@ const struct secure_partition_boot_info *plat_get_secure_partition_boot_info(
  * these platforms. This information is stored in a per-BL array to allow the
  * code to take the correct path.Per BL platform configuration.
  ******************************************************************************/
-void fvp_config_setup(void)
+void __init fvp_config_setup(void)
 {
 	unsigned int rev, hbi, bld, arch, sys_id;
 
@@ -331,7 +331,7 @@ void fvp_config_setup(void)
 }
 
 
-void fvp_interconnect_init(void)
+void __init fvp_interconnect_init(void)
 {
 #if FVP_INTERCONNECT_DRIVER == FVP_CCN
 	if (ccn_get_part0_id(PLAT_ARM_CCN_BASE) != CCN_502_PART0_ID) {

plat/arm/common/arm_bl31_setup.c

@@ -71,7 +71,7 @@ struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type)
  * while creating page tables. BL2 has flushed this information to memory, so
  * we are guaranteed to pick up good data.
  ******************************************************************************/
-void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
+void __init arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
 				uintptr_t hw_config, void *plat_params_from_bl2)
 {
 	/* Initialize the console to provide early debug support */
@@ -235,7 +235,7 @@ void arm_bl31_plat_runtime_setup(void)
 	arm_console_runtime_init();
 }
 
-void bl31_platform_setup(void)
+void __init bl31_platform_setup(void)
 {
 	arm_bl31_platform_setup();
 }
@@ -251,7 +251,7 @@ void bl31_plat_runtime_setup(void)
  * architectural setup (bl31_arch_setup()) does not do anything platform
  * specific.
  ******************************************************************************/
-void arm_bl31_plat_arch_setup(void)
+void __init arm_bl31_plat_arch_setup(void)
 {
 	const mmap_region_t bl_regions[] = {
 		MAP_BL31_TOTAL,
@@ -273,7 +273,7 @@ void arm_bl31_plat_arch_setup(void)
 	arm_setup_romlib();
 }
 
-void bl31_plat_arch_setup(void)
+void __init bl31_plat_arch_setup(void)
 {
 	arm_bl31_plat_arch_setup();
 }

plat/arm/common/arm_common.c

@@ -41,7 +41,7 @@ void arm_setup_romlib(void)
  * - Coherent memory region, if applicable.
  */
 
-void arm_setup_page_tables(const mmap_region_t bl_regions[],
+void __init arm_setup_page_tables(const mmap_region_t bl_regions[],
 			   const mmap_region_t plat_regions[])
 {
 #if LOG_LEVEL >= LOG_LEVEL_VERBOSE

plat/arm/common/arm_console.c

@@ -19,7 +19,7 @@ static console_pl011_t arm_runtime_console;
 #endif
 
 /* Initialize the console to provide early debug support */
-void arm_console_boot_init(void)
+void __init arm_console_boot_init(void)
 {
 #if MULTI_CONSOLE_API
 	int rc = console_pl011_register(PLAT_ARM_BOOT_UART_BASE,

plat/arm/common/arm_pm.c

@@ -208,7 +208,7 @@ void plat_arm_program_trusted_mailbox(uintptr_t address)
  * The ARM Standard platform definition of platform porting API
  * `plat_setup_psci_ops`.
  ******************************************************************************/
-int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+int __init plat_setup_psci_ops(uintptr_t sec_entrypoint,
 				const plat_psci_ops_t **psci_ops)
 {
 	*psci_ops = plat_arm_psci_override_pm_ops(&plat_arm_psci_pm_ops);

plat/arm/css/drivers/mhu/css_mhu.c

@@ -81,7 +81,7 @@ void mhu_secure_message_end(unsigned int slot_id)
 	arm_lock_release();
 }
 
-void mhu_secure_init(void)
+void __init mhu_secure_init(void)
 {
 	arm_lock_init();
 
@@ -93,7 +93,7 @@ void mhu_secure_init(void)
 	assert(mmio_read_32(PLAT_CSS_MHU_BASE + CPU_INTR_S_STAT) == 0);
 }
 
-void plat_arm_pwrc_setup(void)
+void __init plat_arm_pwrc_setup(void)
 {
 	mhu_secure_init();
 }

plat/arm/css/drivers/scp/css_pm_scmi.c

@@ -328,7 +328,7 @@ static int scmi_ap_core_init(scmi_channel_t *ch)
 	return 0;
 }
 
-void plat_arm_pwrc_setup(void)
+void __init plat_arm_pwrc_setup(void)
 {
 	channel.info = &plat_css_scmi_plat_info;
 	channel.lock = ARM_LOCK_GET_INSTANCE;

plat/arm/css/sgi/sgi_interconnect.c

@@ -17,7 +17,7 @@
 /******************************************************************************
  * Helper function to initialize ARM interconnect driver.
  *****************************************************************************/
-void plat_arm_interconnect_init(void)
+void __init plat_arm_interconnect_init(void)
 {
 }
 

plat/arm/css/sgm/sgm_interconnect.c

@@ -4,6 +4,8 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
+#include <cdefs.h>
+
 /*
  * As the SGM platform supports FCM (with automatic interconnect
  * enter/exit), we should not do anything in these interface functions.
@@ -13,7 +15,7 @@
 /******************************************************************************
  * Helper function to initialize ARM interconnect driver.
  *****************************************************************************/
-void plat_arm_interconnect_init(void)
+void __init plat_arm_interconnect_init(void)
 {
 }