feat(ls1046aqds): add board ls1046aqds support

ls1046aqds board is full function board to evaluate ls1046a platform.

Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: Id1befe37a25f7c379e76791538348fd03bba78f7

plat/nxp/soc-ls1046a/ls1046aqds/ddr_init.c

@@ -0,0 +1,90 @@
+/*
+ * Copyright 2018-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+
+#include <common/debug.h>
+#include <ddr.h>
+#include <lib/utils.h>
+
+#include <errata.h>
+
+static const struct rc_timing rce[] = {
+	{U(1600), U(8), U(7)},
+	{U(1867), U(8), U(7)},
+	{U(2134), U(8), U(9)},
+	{}
+};
+
+static const struct board_timing udimm[] = {
+	{U(0x04), rce, U(0x01020304), U(0x06070805)},
+};
+
+int ddr_board_options(struct ddr_info *priv)
+{
+	int ret;
+	struct memctl_opt *popts = &priv->opt;
+
+	if (popts->rdimm) {
+		debug("RDIMM parameters not set.\n");
+		return -EINVAL;
+	}
+
+	ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm));
+	if (ret != 0) {
+		return ret;
+	}
+
+	popts->wrlvl_override = U(1);
+	popts->wrlvl_sample = U(0x0);	/* 32 clocks */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN	|
+			  DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm)	|
+			  DDR_CDR2_VREF_TRAIN_EN		|
+			  DDR_CDR2_VREF_RANGE_2;
+
+	/* optimize cpo for erratum A-009942 */
+	popts->cpo_sample = U(0x70);
+
+	return 0;
+}
+
+long long init_ddr(void)
+{
+	int spd_addr[] = { NXP_SPD_EEPROM0 };
+	struct ddr_info info;
+	struct sysinfo sys;
+	long long dram_size;
+
+	zeromem(&sys, sizeof(sys));
+	if (get_clocks(&sys)) {
+		ERROR("System clocks are not set\n");
+		assert(0);
+	}
+	debug("platform clock %lu\n", sys.freq_platform);
+	debug("DDR PLL1 %lu\n", sys.freq_ddr_pll0);
+	debug("DDR PLL2 %lu\n", sys.freq_ddr_pll1);
+
+	zeromem(&info, sizeof(struct ddr_info));
+	info.num_ctlrs = 1;
+	info.dimm_on_ctlr = 1;
+	info.clk = get_ddr_freq(&sys, 0);
+	info.spd_addr = spd_addr;
+	info.ddr[0] = (void *)NXP_DDR_ADDR;
+
+	dram_size = dram_init(&info);
+
+	if (dram_size < 0) {
+		ERROR("DDR init failed.\n");
+	}
+
+#ifdef ERRATA_SOC_A008850
+	erratum_a008850_post();
+#endif
+
+	return dram_size;
+}

plat/nxp/soc-ls1046a/ls1046aqds/plat_def.h

@@ -0,0 +1,79 @@
+/*
+ * Copyright 2018-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_DEF_H
+#define PLAT_DEF_H
+
+#include <arch.h>
+/* Required without TBBR.
+ * To include the defines for DDR PHY
+ * Images.
+ */
+#include <tbbr_img_def.h>
+
+#include <policy.h>
+#include <soc.h>
+
+#define NXP_SPD_EEPROM0		0x51
+
+#define NXP_SYSCLK_FREQ		100000000
+#define NXP_DDRCLK_FREQ		100000000
+
+/* UART related definition */
+#define NXP_CONSOLE_ADDR	NXP_UART_ADDR
+#define NXP_CONSOLE_BAUDRATE	115200
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL2)
+#if defined(TRUSTED_BOARD_BOOT)
+#define PLATFORM_STACK_SIZE	0x2000
+#else
+#define PLATFORM_STACK_SIZE	0x1000
+#endif
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE	0x1000
+#endif
+
+/* SD block buffer */
+#define NXP_SD_BLOCK_BUF_SIZE	(0x00100000)
+#define NXP_SD_BLOCK_BUF_ADDR	ULL(0x80000000)
+
+#define BL2_LIMIT		(NXP_OCRAM_ADDR + NXP_OCRAM_SIZE)
+
+/* IO defines as needed by IO driver framework */
+#define MAX_IO_DEVICES		U(3)
+#define MAX_IO_BLOCK_DEVICES	U(1)
+#define MAX_IO_HANDLES		U(4)
+
+/*
+ * FIP image defines - Offset at which FIP Image would be present
+ * Image would include Bl31 , Bl33 and Bl32 (optional)
+ */
+#ifdef POLICY_FUSE_PROVISION
+#define MAX_FIP_DEVICES		U(2)
+#endif
+
+#ifndef MAX_FIP_DEVICES
+#define MAX_FIP_DEVICES		U(1)
+#endif
+
+/*
+ * ID of the secure physical generic timer interrupt used by the BL32.
+ */
+#define BL32_IRQ_SEC_PHY_TIMER	29
+
+/*
+ * Define properties of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define PLAT_LS_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+
+#define PLAT_LS_G0_IRQ_PROPS(grp)
+
+#endif

plat/nxp/soc-ls1046a/ls1046aqds/platform.c

@@ -0,0 +1,28 @@
+/*
+ * Copyright 2020-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat_common.h>
+
+#pragma weak board_enable_povdd
+#pragma weak board_disable_povdd
+
+bool board_enable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+	return true;
+#else
+	return false;
+#endif
+}
+
+bool board_disable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+	return true;
+#else
+	return false;
+#endif
+}

plat/nxp/soc-ls1046a/ls1046aqds/platform.mk

@@ -0,0 +1,39 @@
+#
+# Copyright 2018-2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# board-specific build parameters
+BOOT_MODE	?=	qspi
+BOARD		:=	ls1046aqds
+POVDD_ENABLE	:=	no
+
+ # DDR Compilation Configs
+NUM_OF_DDRC	:=	1
+DDRC_NUM_DIMM	:=	1
+DDRC_NUM_CS	:=	4
+DDR_ECC_EN	:=	yes
+CONFIG_STATIC_DDR := 0
+
+# On-Board Flash Details
+QSPI_FLASH_SZ	:=	0x20000000
+NOR_FLASH_SZ	:=	0x20000000
+
+# Platform specific features.
+WARM_BOOT	:=	no
+
+# Adding Platform files build files
+BL2_SOURCES	+=	${BOARD_PATH}/ddr_init.c\
+			${BOARD_PATH}/platform.c
+
+SUPPORTED_BOOT_MODE	:=	qspi	\
+				sd	\
+				nor	\
+				nand
+
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
+include plat/nxp/soc-ls1046a/soc.mk

plat/nxp/soc-ls1046a/ls1046aqds/platform_def.h

@@ -0,0 +1,13 @@
+/*
+ * Copyright 2018-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <plat_def.h>
+#include <plat_default_def.h>
+
+#endif /* PLATFORM_DEF_H */

plat/nxp/soc-ls1046a/ls1046aqds/policy.h

@@ -0,0 +1,16 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef POLICY_H
+#define	POLICY_H
+
+/* Set this to 0x0 to leave the default SMMU page size in sACR
+ * Set this to 0x1 to change the SMMU page size to 64K
+ */
+#define POLICY_SMMU_PAGESZ_64K 0x1
+
+#endif /* POLICY_H */